GitLab

Fix bug when creating code variables via OS_SetVarVal, remove errant line from s.ARM600, automatically enable alignment exceptions if NoUnaligned is TRUE (Cortex branch)

Detail:
  s/ARM600 - Removed an errant line that could have caused problems if the ARM600 MMU model was used with the WB_CR7_Lx cache type
  s/Arthur2 - OS_SetVarVal was failing to call XOS_SynchroniseCodeAreas after copying the code variables code block into the system heap. This has now been fixed.
  s/HAL - Alignment exceptions are now automatically enabled when the kernel is built with the NoUnaligned option turned on.
Admin:
  Tested on rev C2 beagleboard. OS_SetVarVal fix means the Debugger module now shows the right register names instead of ofla!


Version 5.35, 4.79.2.98.2.15. Tagged as 'Kernel-5_35-4_79_2_98_2_15'

Detail:
  s/ARM600 - fix to SyncCodeAreasRange to correctly read cache line length for WB_CR7_Lx caches
  s/ARMops - Cortex cache handling fixes. Enable L2 cache for Cortex.
  s/ChangeDyn - VMSAv6 support in AllocateBackingLevel2
  s/HAL - Improve RISCOS_InitARM to set/clear correct CP15 flags for ARMv6/v7. VMSAv6 support in code to generate initial page tables.
  s/NewReset - Extra DebugTX calls during OS startup. Disable pre-HAL Processor_Type for HAL builds.
  s/VMSAv6 - Main VMSAv6 MMU code - stripped down version of s/ARM600 with support for basic VMSAv6 features.
  hdr/Options - Use VMSAv6 MMU code, not ARM600. Disable ARM6support since current VMSAv6 code will conflict with it.
Admin:
  Tested basic OS functionality under qemu-omap3 and revision B6 beagleboard.


Version 5.35, 4.79.2.98.2.3. Tagged as 'Kernel-5_35-4_79_2_98_2_3'

  [Not fully implemented - for now leaves at least 16MB free if only
  one RAM area; was 1MB].
* Added HAL_USBControllerInfo, HAL_MonitorLeadID and HAL_Video_Render.
* Added HAL->OS call OS_IICOpV.
* OS_MMUControl now allows independent control of I and C bits.
* Added facility to deactivate keyboard debounce (magic word "NoKd" in
  R2 in KeyV 0).
* Fixed problem with RAM amounts not a multiple of 4MB.
* Supremacy bit (in VDU 19) now sets all 8 bits of supremacy.
* Added PaletteV 14 (reads gamma tables).
* Added Supremacy transfer functions (like gamma correction, but for
  supremacy). Allows easy global supremacy effects in a mode-independent
  fashion. Controlled with PaletteV 15,16.
* Added modes 50-53 (320x240, 1,2,4,8bpp). Intended for small LCD.
* Added 13.5kHz versions of TV modes (selected by Hdr:Machine).
* Upped desktop version to 5.06.

Version 5.35, 4.79.2.66. Tagged as 'Kernel-5_35-4_79_2_66'

Detail:
  Lots of changes since last version, at least the following:
  * Updated OS timestamp, removed alpha status
  * Negative INKEY OS version changed to &AA
  * GraphicsV is now alocated vector number &2A
  * ROM moved up to &FC000000
  * Max application slot increased to 512 Mbytes (for now)
  * Max size of RMA increased to 256 Mbytes
  * RMA is now first-created dynamic area (so it gets lowest address after
    top of application slot)
  * OS_Memory 10 reimplemeted
  * New OS_ReadSysInfo 6 values 18-22 added
  * OS_ReadSysInfo 8 gains flag bit to indicate soft power-off
  * Misc internal top-bit-set-address fixes
  * *ChangeDynamicArea can take sizes in megabytes or gigabytes
  * Magic word "&off" in R0 passed to OS_Reset powers down if possible
  * Added acceleration: block copy; CLS; text window scroll up; rectangle
    fill
  * Disabled LED flashing in page mode (liable to crash)
  * Masked sprite plot and VDU 5 text avoids reading the screen if poss...

In the No26bitCode case (ie when abort handlers are entered in ABT32 mode), if lazy task swapping was enabled and a data abort occurred that was not a page translation fault, then the code in AMB_LazyFixUp to map in the whole application slot was being circumvented, leading to problems for abort handlers in application space because r14_abt was corrupted by any abort due to accessing the abort handler itself. The test of the FSR (to compensate for the FAR being unusable for external aborts) which prompted the circumvention has therefore been moved inside AMB_LazyFixup.

Also now preserves the FSR and FAR across AMB_LazyFixUp, so they are now
visible from application abort handlers if desired.

Version 5.35, 4.79.2.50. Tagged as 'Kernel-5_35-4_79_2_50'

Version 5.35, 4.79.2.48. Tagged as 'Kernel-5_35-4_79_2_48'

* Allows HAL-driven software resets.
* Sound buffers corrected to be uncacheable.

Version 5.35, 4.79.2.33. Tagged as 'Kernel-5_35-4_79_2_33'

Reimplement Lazy task swapping, an amusing idea from Ursula, would have done it sooner but couldn't be bothered (humour).

Currently activates for all ARMs flagged as base-restored
abort model. No handling of eg. StrongARM pre-revT bug, but
then the kernel no longer runs on StrongARM (progress).
Still some details to fix: all aborts in current app space
assumed to be missing pages, but this must be fixed to
handle abort code in app space, things like debuggers
marking code read only.

Plus, small fixes:
  OS_Memory 8 returns vaguely useful info for RAM,VRAM
  in HAL build (temporary partial implementation)
  Broken handling of old BBC commands with (fx,tv etc)
  with no spaces fixed (fudgeulike code from Ursula,
  now 32-bit).

Version 5.35, 4.79.2.31. Tagged as 'Kernel-5_35-4_79_2_31'

Version 5.35, 4.79.2.17. Tagged as 'Kernel-5_35-4_79_2_17'

Detail:
  ARM600.s
Admin:
  (highlight level of testing that has taken place)
  (bugfix number if appropriate)

kernel now attempts to substitute video mode numbers in face of h/w with limited bits-per-pixel support (not tested yet)

HAL_API document added - early draft only, of interest to those
writing or modifying HALs for new h/w
ARMop_API document added - early draft only, of interest only
to those modifying kernel to support new ARM cores
*** polite comments on HAL_API welcome ***

Version 5.35, 4.79.2.15. Tagged as 'Kernel-5_35-4_79_2_15'

First attempt at ARM9 support, and general clean-up of old ARM-specific code, now using vectored ARMops.

Not tested.

Version 5.35, 4.79.2.14. Tagged as 'Kernel-5_35-4_79_2_14'

Check-in of the few last-minute changes for the Customer L demo. Nothing exciting, apart from an extended touchscreen API.

Version 5.35, 4.79.2.13. Tagged as 'Kernel-5_35-4_79_2_13'

more use of ARMops in page manipulation, change register usage of ARmops tested by kernel boot to star prompt only

Version 5.35, 4.79.2.11. Tagged as 'Kernel-5_35-4_79_2_11'

More stuff. Up to the desktop now; cache on, working keyboard. Some source restructuring to start to make splitting it up into several object files more feasible.

It says "Abort on data transfer".

mjs macros switch on HAL for calling video code in HAL/pseudo HAL cases vduhint code even more almost ready to move to HAL

Version 5.35, 4.79.2.6. Tagged as 'Kernel-5_35-4_79_2_6'

Version 5.35, 4.79.2.5. Tagged as 'Kernel-5_35-4_79_2_5'

further kernel/HAL split work in video area almost-HAL code for VIDC20/IOMD in vdu.vduhint, now almost divorced from kernel workspace tested briefly in Ursula desktop environment

Version 5.35, 4.79.2.4. Tagged as 'Kernel-5_35-4_79_2_4'

partial video changes for kernel/HAL split near-HAL code for VIDC/IOMD in vdu.vduhint briefly tested in Ursula desktop build still some kernel workspace dependency in near-HAL code

Version 5.35, 4.79.2.3. Tagged as 'Kernel-5_35-4_79_2_3'

Version 5.35, 4.79.2.2. Tagged as 'Kernel-5_35-4_79_2_2'

* Added ARM_IMB and ARM_IMBRange SWIs as recommended by ARMv5.
* Some early prototype HAL bits popped in - a lot of source restructuring still
  to come.
* New debug target creates an AIF image with debug information, and translates
  this into an ASCII object file for the 16702B logic analyser.

Version 5.35, 4.79.2.1. Tagged as 'Kernel-5_35-4_79_2_1'

  RPCEm update.
* Register allocation in default ErrorV handler fixed - problems occured when
  callbacks were triggered on way out.
* OS_Byte 19 didn't manipulate interrupt disable flag correctly in 26-bit
  builds.
* Stray bit of debugging left in sprite code many years ago removed.

Version 5.23. Not tagged

Details:
  The Kernel will now compile to produce a pure 32-bit system if No26bitCode is
  set to TRUE.
  If No26bitCode is FALSE, then the Kernel will be a standard 26-bit Kernel,
  although some internal changes have taken place to minimise compile
  switches between the two cases. See Docs.32bit for more technical info.

  The hardest part was the flood-fill...

Other changes:
  Pointer shape changes now take place on the next VSync, rather than actually
  WAITING for the VSync. Turning the Hourglass on shouldn't slow your machine
  down by 5% now :)

  Lots of really crusty pre-IOMD code removed.

Admin:
  Tested in 32 and 26-bit forms in a limited desktop build. Basically, this
  will need to see a lot of use to iron out difficulties. I'd like anyone who
  has a non-frozen project to at least attempt using this Kernel.

Version 5.23. Tagged as 'Kernel-5_23'

  Ensured that M_Phoebe builds set UtilityModule version to 4.00
Detail:
  The softload utility relies on the existence of the extra reason codes
    to OS_ReadSysInfo introduced in Ursula.  The main kernel now supports
    these too (they are simply interfaces to read kernel capabilities and
    configuration - eg. addresses and sizes of UND and SVC mode stacks)
  Avoid OS_ReadSysInfo 9 - ROL have used it for reading the ROM personality
    information (and it's not in our kernel)
  Added some of the new macros into Copro15ops required by the ABT dump
    area code (returned by OS_ReadSysInfo 7) and added the code into ARM600
    to store abort information there.
Admin:
  Required by softload utility for Ursula builds.
  Tested on Risc PC.

Version 5.15. Tagged as 'Kernel-5_15'

* Wasn't allowing writes to most of EEPROM.
* Old prototype OS_SetTime SWI code removed.
* MPEGPoduleNTSCNotPALMask option support removed to simplify things a bit.
* Now can cope with a system with a PAL/NTSC link, but no monitor detect line.
* Default PAL & NTSC modes now always 12 & 46 respectively.
* Kernel now knows about monitor type 8 (NTSC) - modes 44-46 (640x200) are
  available.
* STB/NC CMOS test removed from POST pending further investigation.

Version 4.90. Tagged as 'Kernel-4_90'

Added support for ATMEL 4K and 8K EEPROM parts, including write protection of top quarter. Untested.

Added support for ARM7500FE IO clock divide by 2.

Version 4.89. Tagged as 'Kernel-4_89'

* Integrated Ursula fast service call dispatch code.
* Added Interruptible32bitModes from Ursula.
* Stopped allowing ROM modules (other than the Kernel/UtilityModule) to write
  to the hardware vectors in 26-bit mode.

Version 4.81. Tagged as 'Kernel-4_81'

Video memory now limited to 8M (instead of 16M) to make room.
OS_Memory 7 now reports ROM correctly when the image is >4M.

Version 4.76. Tagged as 'Kernel-4_76'

ROM speed not taken from the Machine header file.  POST can now exist in a softloaded OS, since it searches for a zero word in the ROM instead of using one within the POST when trying to communicate with the POST adapter (the zero word must be in ROM).  Fixed to build on non-chrontel STB/NC products.  Lots of duplicate code merged in

MemSize.  MemSize copes better with the softload case, and is less
willing to use the region the OS occupies as video memory, or
page tables.  POST is now ON (memory tests disabled).
OS_ReadSysInfo 4 now uses the NVRAM module to access the ethernet
address in NVRAM/CMOS, so that the availability/location of the
MAC address can be changed.  CMOS location 0 is now unprotected on
STB/NC products to try to stop people poking the hardware directly.
Fixed a CMOS resetting problem on STBs where the value expected in a
location was different from the value written on a CMOS reset, so the
CMOS would be reset every time...

Version 4.69. Tagged as 'Kernel-4_69'

Bandwidth limit for 7500FE fixed.
RO371Timings flag set to :LNOT:STB

Version 4.64. Tagged as 'Kernel-4_64'

Not fully tested on all hardware permutations.