GitLab

kernel now attempts to substitute video mode numbers in face of h/w with limited bits-per-pixel support (not tested yet)

HAL_API document added - early draft only, of interest to those
writing or modifying HALs for new h/w
ARMop_API document added - early draft only, of interest only
to those modifying kernel to support new ARM cores
*** polite comments on HAL_API welcome ***

Version 5.35, 4.79.2.15. Tagged as 'Kernel-5_35-4_79_2_15'

First attempt at ARM9 support, and general clean-up of old ARM-specific code, now using vectored ARMops.

Not tested.

Version 5.35, 4.79.2.14. Tagged as 'Kernel-5_35-4_79_2_14'

Check-in of the few last-minute changes for the Customer L demo. Nothing exciting, apart from an extended touchscreen API.

Version 5.35, 4.79.2.13. Tagged as 'Kernel-5_35-4_79_2_13'

more use of ARMops in page manipulation, change register usage of ARmops tested by kernel boot to star prompt only

Version 5.35, 4.79.2.11. Tagged as 'Kernel-5_35-4_79_2_11'

More stuff. Up to the desktop now; cache on, working keyboard. Some source restructuring to start to make splitting it up into several object files more feasible.

It says "Abort on data transfer".

mjs macros switch on HAL for calling video code in HAL/pseudo HAL cases vduhint code even more almost ready to move to HAL

Version 5.35, 4.79.2.6. Tagged as 'Kernel-5_35-4_79_2_6'

Version 5.35, 4.79.2.5. Tagged as 'Kernel-5_35-4_79_2_5'

further kernel/HAL split work in video area almost-HAL code for VIDC20/IOMD in vdu.vduhint, now almost divorced from kernel workspace tested briefly in Ursula desktop environment

Version 5.35, 4.79.2.4. Tagged as 'Kernel-5_35-4_79_2_4'

partial video changes for kernel/HAL split near-HAL code for VIDC/IOMD in vdu.vduhint briefly tested in Ursula desktop build still some kernel workspace dependency in near-HAL code

Version 5.35, 4.79.2.3. Tagged as 'Kernel-5_35-4_79_2_3'

Version 5.35, 4.79.2.2. Tagged as 'Kernel-5_35-4_79_2_2'

* Added ARM_IMB and ARM_IMBRange SWIs as recommended by ARMv5.
* Some early prototype HAL bits popped in - a lot of source restructuring still
  to come.
* New debug target creates an AIF image with debug information, and translates
  this into an ASCII object file for the 16702B logic analyser.

Version 5.35, 4.79.2.1. Tagged as 'Kernel-5_35-4_79_2_1'

  RPCEm update.
* Register allocation in default ErrorV handler fixed - problems occured when
  callbacks were triggered on way out.
* OS_Byte 19 didn't manipulate interrupt disable flag correctly in 26-bit
  builds.
* Stray bit of debugging left in sprite code many years ago removed.

Version 5.23. Not tagged

Details:
  The Kernel will now compile to produce a pure 32-bit system if No26bitCode is
  set to TRUE.
  If No26bitCode is FALSE, then the Kernel will be a standard 26-bit Kernel,
  although some internal changes have taken place to minimise compile
  switches between the two cases. See Docs.32bit for more technical info.

  The hardest part was the flood-fill...

Other changes:
  Pointer shape changes now take place on the next VSync, rather than actually
  WAITING for the VSync. Turning the Hourglass on shouldn't slow your machine
  down by 5% now :)

  Lots of really crusty pre-IOMD code removed.

Admin:
  Tested in 32 and 26-bit forms in a limited desktop build. Basically, this
  will need to see a lot of use to iron out difficulties. I'd like anyone who
  has a non-frozen project to at least attempt using this Kernel.

Version 5.23. Tagged as 'Kernel-5_23'

  Ensured that M_Phoebe builds set UtilityModule version to 4.00
Detail:
  The softload utility relies on the existence of the extra reason codes
    to OS_ReadSysInfo introduced in Ursula.  The main kernel now supports
    these too (they are simply interfaces to read kernel capabilities and
    configuration - eg. addresses and sizes of UND and SVC mode stacks)
  Avoid OS_ReadSysInfo 9 - ROL have used it for reading the ROM personality
    information (and it's not in our kernel)
  Added some of the new macros into Copro15ops required by the ABT dump
    area code (returned by OS_ReadSysInfo 7) and added the code into ARM600
    to store abort information there.
Admin:
  Required by softload utility for Ursula builds.
  Tested on Risc PC.

Version 5.15. Tagged as 'Kernel-5_15'

* Wasn't allowing writes to most of EEPROM.
* Old prototype OS_SetTime SWI code removed.
* MPEGPoduleNTSCNotPALMask option support removed to simplify things a bit.
* Now can cope with a system with a PAL/NTSC link, but no monitor detect line.
* Default PAL & NTSC modes now always 12 & 46 respectively.
* Kernel now knows about monitor type 8 (NTSC) - modes 44-46 (640x200) are
  available.
* STB/NC CMOS test removed from POST pending further investigation.

Version 4.90. Tagged as 'Kernel-4_90'

Added support for ATMEL 4K and 8K EEPROM parts, including write protection of top quarter. Untested.

Added support for ARM7500FE IO clock divide by 2.

Version 4.89. Tagged as 'Kernel-4_89'

* Integrated Ursula fast service call dispatch code.
* Added Interruptible32bitModes from Ursula.
* Stopped allowing ROM modules (other than the Kernel/UtilityModule) to write
  to the hardware vectors in 26-bit mode.

Version 4.81. Tagged as 'Kernel-4_81'

Video memory now limited to 8M (instead of 16M) to make room.
OS_Memory 7 now reports ROM correctly when the image is >4M.

Version 4.76. Tagged as 'Kernel-4_76'

ROM speed not taken from the Machine header file.  POST can now exist in a softloaded OS, since it searches for a zero word in the ROM instead of using one within the POST when trying to communicate with the POST adapter (the zero word must be in ROM).  Fixed to build on non-chrontel STB/NC products.  Lots of duplicate code merged in

MemSize.  MemSize copes better with the softload case, and is less
willing to use the region the OS occupies as video memory, or
page tables.  POST is now ON (memory tests disabled).
OS_ReadSysInfo 4 now uses the NVRAM module to access the ethernet
address in NVRAM/CMOS, so that the availability/location of the
MAC address can be changed.  CMOS location 0 is now unprotected on
STB/NC products to try to stop people poking the hardware directly.
Fixed a CMOS resetting problem on STBs where the value expected in a
location was different from the value written on a CMOS reset, so the
CMOS would be reset every time...

Version 4.69. Tagged as 'Kernel-4_69'

Bandwidth limit for 7500FE fixed.
RO371Timings flag set to :LNOT:STB

Version 4.64. Tagged as 'Kernel-4_64'

Not fully tested on all hardware permutations.