GitLab

Detail:
  Three main changes:
  * On odd-numbered (i.e. development) versions of the module, the UtilityModule will now take its date from the VersionNum file instead of using a hard-coded date.
  * All build versions now look for the new "extended ROM footer" (as created by romlinker 0.04+) at the end of the ROM image and use it to determine the ROM build date for return by OS_ReadSysInfo 9,2. Failing to find the build date in the footer will cause OS_ReadSysInfo 9,2 to return 0.
  * On odd-numbered versions, OS_Byte 0 will now use the ROM build date (as found in the extended footer) to generate the error block that's returned to the user. This seems OK as the PRM describes OS_Byte 0 as returning the "creation date of the operation system". Plus it's a convenient way of getting the ROM build date into the Switcher, since the switcher uses OS_Byte 0. If the extended footer can't be found (or if the string hasn't been initialised yet, e.g. before Service_PostInit) the code falls back to a hard-coded string containing the date from the VersionNum file.
  File changes:
  Makefile - Updated to not create the obsolete Time+Date file (previously used for the ROM build date)
  Version - Use date from VersionNum file for development builds
  hdr/Options - New UseNewFX0Error variable/option to make it easy to check which OS_Byte 0 variant should be enabled
  hdr/KernelWS - Added new string buffers & extended ROM footer pointer to workspace
  s/Middle - Updated OS_ReadSysInfo 9 code, and added utility functions for searching the extended ROM footer for certain tags
  s/NewReset - Added a couple of calls to initialise the new string buffers just prior to Service_PostInit. This is required since OS_Byte/OS_ReadSysInfo shouldn't enable interrupts, but date conversion relies on the Territory module, which may enable interrupts.
  s/PMF/osbyte - Updated OS_Byte 0 code
Admin:
  Tested in OMAP ROM, with and without the extended footer present.


Version 5.35, 4.79.2.98.2.41. Tagged as 'Kernel-5_35-4_79_2_98_2_41'

Detail:
  OS_IICOp (and in turn, RISCOS_IICOpV) now treat the top byte of R1 as containing the IIC bus number, allowing multiple buses to be used.
  hdr/KernelWS - Changed workspace a bit so that the kernel can support up to IICBus_Count buses (currently 3), each with its own IICBus_* block.
  s/HAL - Update Reset_IRQ_Handler to cope with interrupts from all IIC buses instead of just the first. Fix/update RISCOS_IICOpV description.
  s/NewIRQs - Update InitialiseIRQ1Vtable to set up interrupt handlers for all IRQ-supporting IIC buses
  s/NewReset - Get rid of the IICAbort call that was just before IICInit. IICInit now calls IICAbort itself.
  s/PMF/IIC - Bulk of the changes. Code now uses the IICBus_ structures instead of the IICStatus and IICType variables. Re-entrancy code has been updated to take into account the possiblity of multiple buses; when OS_IICOp calls are nested, the IIC transfers will be added to bus-specific queues instead of all going in the same queue. However only one queue will be processed at a time.
  s/ChangeDyn - Workspace shuffling means a couple of MOV's needed to be swapped with LDR's when getting immediate constants
Admin:
  Tested with OMAP & IOMD ROM builds.
  Both high & low-level bus types seem to work OK, along with re-entrancy, both on the same bus and on a different bus.


Version 5.35, 4.79.2.98.2.33. Tagged as 'Kernel-5_35-4_79_2_98_2_33'

Detail:
  HAL kernels (on the Cortex branch at least) now support HALDevice-based RTCs. If the kernels own RTC code is disabled or fails to detect an RTC, then after HAL_InitDevices is called the HALDevice list will be scanned for any HAL-resident RTC devices.
  Additionally, the RTCSupport flag (in Hdr:Machine.Machine), which was previously TRUE for all HAL kernels, can now be set to FALSE in HAL kernels to disable the kernels own IIC RTC code. This allows the unwanted legacy RTC code to be disabled for machines which are known to use HAL RTCs instead.
  hdr/RTCDevice - new header describing data structures used for HAL RTC device
  hdr/HALDevice - added RTCDevice device type, IIC serial bus type
  hdr/KernelWS - upgraded RTCFitted from a 1 byte field to 4 byte. It now stores either a null value (for no RTC), a value <2048 for an IIC RTC address, or a value >= 2048 for a RTCDevice ptr
  Makefile - added header export of hdr/RTCDevice
  s/GetAll - include hdr/RTCDevice
  s/NewReset - initialise HAL RTC after HAL_InitDevices if required
  s/PMF/i2cutils, s/PMF/osinit, s/PMF/osword - modifications to allow use of HAL RTC (and disallow use of builtin IIC RTC)
Admin:
  Tested on rev C2 beagleboard


Version 5.35, 4.79.2.98.2.11. Tagged as 'Kernel-5_35-4_79_2_98_2_11'

Add support for Cortex cache type. Extend ARM_Analyse to, where appropriate, use CPU feature registers to identify CPU capabilities.

Detail:
  s/ARMops - Support for Cortex multi-level cache (CT_ctype_WB_CR7_Lx). New ARM_Analyse_Fancy to identify CPU capabilities using feature registers.
  s/HAL - Modify pre-ARMop cache code to handle Cortex-syle caches.
  s/MemInfo - Replace ARM_flush_TLB macro call with appropriate ARMop to provide Cortex compatability
  hdr/ARMops - Update list of ARM architectures
  hdr/CoPro15ops - Deprecate ARM_flush_* macros for HAL kernels, as they are no longer capable of flushing all cache types. ARMops should be used instead.
  hdr/KernelWS - Add storage space for multi-level cache properties required for new cache cleaning code.
Admin:
  Tested under qemu-omap3. Still unable to verify on real hardware due to lack of appropriate MMU code. However new OMAP3 HAL code that uses similar cache management functions appears to work fine on real hardware.


Version 5.35, 4.79.2.98.2.2. Tagged as 'Kernel-5_35-4_79_2_98_2_2'

Detail:
  174: left border size
  175: bottom border size
  176: right border size
  177: top border size
Admin:
  Not tested.

Version 5.35, 4.79.2.68. Tagged as 'Kernel-5_35-4_79_2_68'

  [Not fully implemented - for now leaves at least 16MB free if only
  one RAM area; was 1MB].
* Added HAL_USBControllerInfo, HAL_MonitorLeadID and HAL_Video_Render.
* Added HAL->OS call OS_IICOpV.
* OS_MMUControl now allows independent control of I and C bits.
* Added facility to deactivate keyboard debounce (magic word "NoKd" in
  R2 in KeyV 0).
* Fixed problem with RAM amounts not a multiple of 4MB.
* Supremacy bit (in VDU 19) now sets all 8 bits of supremacy.
* Added PaletteV 14 (reads gamma tables).
* Added Supremacy transfer functions (like gamma correction, but for
  supremacy). Allows easy global supremacy effects in a mode-independent
  fashion. Controlled with PaletteV 15,16.
* Added modes 50-53 (320x240, 1,2,4,8bpp). Intended for small LCD.
* Added 13.5kHz versions of TV modes (selected by Hdr:Machine).
* Upped desktop version to 5.06.

Version 5.35, 4.79.2.66. Tagged as 'Kernel-5_35-4_79_2_66'

Added "fast" flash tool for Customer L, allowing ROMs to be sent serially at
115200 baud not 9600 baud.
Fix to VDU despatch for ARMv4 and later.
Fixes to power on delete keyboard and keyboard timeout
Implemented MemoryReadPhys and MemoryAmounts with the HAL.

Version 5.35, 4.79.2.59. Tagged as 'Kernel-5_35-4_79_2_59'

Detail:
  * Merged in the change to RISC OS 4.02 kernel that moved the GSTrans
    workspace out of scratch space.
  * Fixed a few bugs in callback postponement, and interrupt holes in
    callback dispatch. See Docs.CallbackChange for full info.
  * Fixed SystemSizeCMOS to SysHeapCMOS - wouldn't build as was.
  * Added an export of a C version of Hdr:HALDevice, based on the Hdr2H
    translation but with an additional struct definition. Required by
    SoundControl 1.00.
  * Added some additional location and ID allocations to Hdr:HALDevice.
    Required by today's HAL and SoundControl.
Admin:
  Partially tested.

Version 5.35, 4.79.2.56. Tagged as 'Kernel-5_35-4_79_2_56'

*Configure ANYTHINGsize was broken due to not setting R0 to ReadUnsigned
IIC ack message uninternationalised
OS_Memory was saying we only had 4M of RAM
VDU4 scrolling when output was switched to sprite was causing corruption
on use of CTRL-J and CTRL-K
Default SystemSize CMOS set to 32k

Version 5.35, 4.79.2.55. Tagged as 'Kernel-5_35-4_79_2_55'

Detail:
  Lots of changes since last version, at least the following:
  * Updated OS timestamp, removed alpha status
  * Negative INKEY OS version changed to &AA
  * GraphicsV is now alocated vector number &2A
  * ROM moved up to &FC000000
  * Max application slot increased to 512 Mbytes (for now)
  * Max size of RMA increased to 256 Mbytes
  * RMA is now first-created dynamic area (so it gets lowest address after
    top of application slot)
  * OS_Memory 10 reimplemeted
  * New OS_ReadSysInfo 6 values 18-22 added
  * OS_ReadSysInfo 8 gains flag bit to indicate soft power-off
  * Misc internal top-bit-set-address fixes
  * *ChangeDynamicArea can take sizes in megabytes or gigabytes
  * Magic word "&off" in R0 passed to OS_Reset powers down if possible
  * Added acceleration: block copy; CLS; text window scroll up; rectangle
    fill
  * Disabled LED flashing in page mode (liable to crash)
  * Masked sprite plot and VDU 5 text avoids reading the screen if possible
  * Framestore made USR mode accessible
  * Fix for VDU 5,127 bug - now relies on font definitions being in extreme
    quarters of memory, rather than bottom half
  * Allocated 64-bit OS_Convert... SWIs
  * IIC errors use allocated error numbers
  * Looks for Dallas RTC before Philips RTC because we're using a Philips
    NVRAM device with the same ID
  * Fix to bug that meant the oscillator in the Dallas RTC wasn't enabled
  * Default mouse type (USB) changed to allocated number
  * Ram disc max size increased to 128 Mbytes (Ursula merge) and made
    cacheable for StrongARMs (not XScale)
  * Branch through zero handler now works in USR mode, by use of a
    trampoline in the system stack to allow PC-relative register storage
  * Address exception handler changed to not use 0 as workspace
  * OS_Memory 13 extended to allow specification of cacheability and access
    privileges
  * Added OS_Memory 16 to return important memory addresses
  * RISCOS_MapInIO() takes cacheable flag in bit 3, access permissions in
    bits 10 and 11, doubly-mapped flag in bit 20, and access permissions
    specified flag in bit 21
  * Bug fix in last version for application abort handlers didn't quite
    work; register shuffle required
  * "Module is not 32-bit compatible" error now reports the module name
  * Default configured language changed from 10 to 11 (now Desktop again)

Version 5.35, 4.79.2.51. Tagged as 'Kernel-5_35-4_79_2_51'

Detail:
  * Implemented OS_Hardware 2, 3 and 4 as described in Docs.HAL.NewAPI.
  * Added new OS->HAL and HAL->OS routines to register HAL devices with the
    OS during hard resets.
  * Updated Docs.HAL.NewAPI to correct inconsistencies, fill in missing
    definitions, and allow for interrupt sharing.
  * Now uses OS_LeaveOS to trigger callbacks after ROM module init.
Admin:
  Untested. Requires new HAL.

Version 5.35, 4.79.2.49. Tagged as 'Kernel-5_35-4_79_2_49'

Version 5.35, 4.79.2.48. Tagged as 'Kernel-5_35-4_79_2_48'

IOMD HAL:
  enables fast clock for StrongARM on Medusa h/w

Kernel:
  ARMops for StrongARM implemented. Tested moderately on
  HAL/32-bit minimal desktop build for Risc PC. Could do
  with more testing later. eg. does reentrant cache
  cleaning support really work?
  Lazy task swapping is enabled for revT or later, wahey.

Version 5.35, 4.79.2.42. Tagged as 'Kernel-5_35-4_79_2_42'

1) Bring IOMD HAL more up to date. Add support for new call HAL_CleanerSpace (preparation for StrongARM kernel support).

2) In kernel, add HAL_CleanerSpace call (preparation for
StrongARM and XScale core support). Fix bug found with
ARMv3 support during test on Risc PC.

3) Implement new API for kernel SWIs that have used top
bits of addresses as flags. The new API has an extra
flag that must be set, so kernel can distinguish and
support both APIs. The reason for all this is that
addresses are 32-bits now, people, keep up there. Briefly:

  OS_HeapSort
    bit 31 of r0 set for new API, r1 is full 32-bit address
    flags move from r1 bits 31-29 to r0 bits 30-28

  OS_ReadLine
    bit 31 of r1 set for new API, r0 is full 32-bit address
    flags move from bits 31,30 of r0 to bits 30,29 of r1

  OS_SubstituteArgs
    bit 31 of r2 set for new API, r0 is full 32-bit address
    flag moves from bit 31 of r0 to bit 30 of r2

Tested on Risc PC and briefly on Customer A 2

Ta

Version 5.35, 4.79.2.41. Tagged as 'Kernel-5_35-4_79_2_41'

Ursula. Quite a hairy code merge really, so let's hope it is
worth it to someone. What you get (back after 2 or 3 years):
- much more efficient for largish numbers of DAs (relevance
  to current build = approx 0)
- fancy reason codes to support fast update of
  Switcher bar display (relevance = 0)
- support for clamped maximum area sizes, to avoid address
  space exhaustion with big memory (relevance = 0)
- better implementation of shrinkable DAs, performance
  wise (if lots of DAs, relevance = approx 0)
- support for 'Sparse' DAs. Holey dynamic areas, Batman!
  (relevance, go on someone use the darned things)
Moderately development tested on HAL/32bit ARM9 desktop.
Note the Switcher should be compiled to use the new
reason codes 6&7, for fabled desktop builds.

Also, during this work, so I could see the wood for the
trees, redid some source code clean up, removing pre-Medusa
stuff (like I did about 3 years ago on Ursula, sigh). That's
why loads of source files have changed. The new DA stuff
is confined pretty much to hdr.KernelWS and s.ChangeDyn.

Ta.

Version 5.35, 4.79.2.38. Tagged as 'Kernel-5_35-4_79_2_38'

Look for LongCommandLine flag, command line size currently
set at 1k.
For HAL/32bit builds, the kernel buffer space is at high
(top bit set) address, which may break some code using signed
comparisons. So *beware* that there may be some latent
bugs in old kernel code using these buffers, not yet found.
One such bug, in s.Arthur2 found and fixed.
Tested moderately on ARM9 desktop build.
Lovely to reimplement things I did two and half years ago.

Version 5.35, 4.79.2.37. Tagged as 'Kernel-5_35-4_79_2_37'

Moved IOAllocPtr and IOAllocLimit to SkippedTables - the ARM9 got away with it because of the writeback cache, but poor souls like Simon condemned to an eternity of the ARM7 were a bit stuffed.

Version 5.35, 4.79.2.34. Tagged as 'Kernel-5_35-4_79_2_34'

spectacular new OS_Memory reason codes 13 map permanent I/O space, return logical address 14 access temporary physical mapping 15 release temporary physical mapping

DA creation and I/O space creation now avoid collision if address
space fills

Version 5.35, 4.79.2.28. Tagged as 'Kernel-5_35-4_79_2_28'

First attempt at ARM9 support, and general clean-up of old ARM-specific code, now using vectored ARMops.

Not tested.

Version 5.35, 4.79.2.14. Tagged as 'Kernel-5_35-4_79_2_14'

Check-in of the few last-minute changes for the Customer L demo. Nothing exciting, apart from an extended touchscreen API.

Version 5.35, 4.79.2.13. Tagged as 'Kernel-5_35-4_79_2_13'

Version 5.35, 4.79.2.12. Tagged as 'Kernel-5_35-4_79_2_12'

more use of ARMops in page manipulation, change register usage of ARmops tested by kernel boot to star prompt only

Version 5.35, 4.79.2.11. Tagged as 'Kernel-5_35-4_79_2_11'

More stuff. Up to the desktop now; cache on, working keyboard. Some source restructuring to start to make splitting it up into several object files more feasible.

Version 5.35, 4.79.2.9. Tagged as 'Kernel-5_35-4_79_2_9'

Detail:
  Added the HAL NVRAM entries.
  Modified i2cutils to use the HAL entries for NVRAM and behave sensibly if the HAL reports that there is no NVRAM, in which case there must be a forced reset_cmos call so that the cache gets set up sensibly.
Admin:
  Tested under the RPC emulator and appears to be working correctly, although some calls to IIC are still being made in the no nvram case.

Version 5.35, 4.79.2.8. Tagged as 'Kernel-5_35-4_79_2_8'

mjs macros switch on HAL for calling video code in HAL/pseudo HAL cases vduhint code even more almost ready to move to HAL

Version 5.35, 4.79.2.6. Tagged as 'Kernel-5_35-4_79_2_6'

Version 5.35, 4.79.2.5. Tagged as 'Kernel-5_35-4_79_2_5'

further kernel/HAL split work in video area almost-HAL code for VIDC20/IOMD in vdu.vduhint, now almost divorced from kernel workspace tested briefly in Ursula desktop environment

Version 5.35, 4.79.2.4. Tagged as 'Kernel-5_35-4_79_2_4'

partial video changes for kernel/HAL split near-HAL code for VIDC/IOMD in vdu.vduhint briefly tested in Ursula desktop build still some kernel workspace dependency in near-HAL code

Version 5.35, 4.79.2.3. Tagged as 'Kernel-5_35-4_79_2_3'

Version 5.35, 4.79.2.2. Tagged as 'Kernel-5_35-4_79_2_2'

* Added ARM_IMB and ARM_IMBRange SWIs as recommended by ARMv5.
* Some early prototype HAL bits popped in - a lot of source restructuring still
  to come.
* New debug target creates an AIF image with debug information, and translates
  this into an ASCII object file for the 16702B logic analyser.

Version 5.35, 4.79.2.1. Tagged as 'Kernel-5_35-4_79_2_1'

  Added common error cache.
Detail:
  Fixed module header validation code which was broken in 5.22.  This
    shouldn't have caused much of a problem as it was only a bizarre
    check (SWI chunk looked valid but SWI handler was 0) that would
    have failed - but be reported as a valid set of SWI entries.
  Added common error message cache.  Several common errors (Buffer
    overflow; Number not recognised; Bad vector release; and a couple
    of others) are now cached the first time they are translated into
    a block of memory in the system heap.
Admin:
  Tested in Ursula build - cacheing only active in Ursula build - change
    HdrSrc if you want it in your products too.
  Requires HdrSrc 0.94

Version 5.31. Tagged as 'Kernel-5_31'

Added compile-time support for full-resolution teletext characters in teletext emulation mode (MODE 7) for that authentic BBC Micro feel.

  Also introduced a few useful teletext control features via VDU 23,18.
  Unrelatedly, fixed *ScreenLoad to work for interlaced displays.

Detail:
  The new typeface is designed on a 16x20 grid (previously we had used 8x10),
  so it uses a screen resolution of 640x500 pixels (rather than 320x250).
  Since we have been unable to source a genuine teletext font, and since
  examination of a BBC Micro suggests that the genuine font may not have been
  a power-of-2 pixels wide, I have designed one specially, based upon the one
  supplied in Zap distributions (a 12x20 font). Rather than increase the
  amount of workspace that the kernel requires for cacheing graphic
  characters, it now generates them on the fly, as they are required; this
  should only add about 25% to their rendering time.

  The new VDU 23 sequences are as follows:

  VDU 23,18,0,mode,0,0,0,0,0,0
    Switch transparency mode
      mode = 0: "Text" mode: the whole display is set opaque
      mode = 1: "Mix" mode: foreground colours, and both foreground and
        background of boxed text are opaque; non-boxed background colours are
        all transparent
      mode = 2: "Box" mode: boxed regions are opaque, others are transparent
      mode = 3: "TV" mode: the whole display is set transparent
    Default is mode = 0.

  VDU 23,18,1,suspend,0,0,0,0,0,0
    Suspend or resume bitmap updates
    This call allows an application to request that the kernel suspends
    updates to the framebuffer bitmap. This allows for a significant speed
    increase in the rendering time for a large amount of text, for example
    when redrawing a complete teletext page, because each time you plot a
    single character, it can cause the whole of the rest of the line to be
    re-rendered. When you switch out of suspend mode, the whole screen is
    refreshed in a single pass. Note that the appearance of the display is
    undefined is you cause a hardware scroll while in suspend mode.
      suspend = 0: screen update is enabled
      suspend = 1: screen update is suspended
    Default is suspend = 0.

  VDU 23,18,2,reveal,0,0,0,0,0,0
    Reveal/conceal
      reveal = 0: characters between the Conceal control code and the next
        colour control code are replaced by spaces
      reveal = 1: all characters are displayed
    Default is reveal = 0.

  VDU 23,18,3,black_emable,0,0,0,0,0,0
    Enable/disable black foreground colour control codes
      black_enable = 0: control codes &80 and &90 do nothing
      black_enable = 1: control code &80 selects black text, control code
        &90 selects black graphics
    Default is black_enable = 0.

  I have performed some timing tests on the rendering of complete teletext
  pages grabbed from the teletext server. These show that the new code
  generally imposes a 2x speed hit. However, when using the VDU 23,18,1
  suspend function, this improves to a 20% speed increase when compared to
  the old low-resolution code. Better still, because the framebuffer is only
  being updated for the final stage of this process, the screen *appears* to
  be updated some 3x faster than with the old code!

  A comment on the VDU variable Log2BPC is in order: in previous kernels,
  this was able unambiguously to refer to both the framebuffer width of a
  character in bytes, and the framebuffer width of an "addressable pixel" in
  bits; this no longer works with the 16-pixel wide teletext font. Bearing
  in mind that future kernels may support Unicode system fonts where the
  width varies from character to character, I have chosen to fix Log2BPC to
  the "addressable pixel" definition.

Admin:
  Requires HdrSrc 0.89 and (for non-desktop builds) Interlace 0.61. A monitor
  definition file containing a definition for a 640x500 screen mode is also
  required; version 0.40 of ModeFiles contains a suitable mode for STB-400.

  Tested fairly rigourously on an Ursula build, a Lazarus build and an
  STB-400 build, using genuine teletext pages and Yellow River Kingdom.

Version 5.30. Tagged as 'Kernel-5_30'

Had one of those weekend brainstorms - managed to speed up SWI despatcher _and_ add Thumb support to it.

Fixed OS_BreakPt - was confused by PC/PSR split.

Version 5.24. Not tagged

Details:
  The Kernel will now compile to produce a pure 32-bit system if No26bitCode is
  set to TRUE.
  If No26bitCode is FALSE, then the Kernel will be a standard 26-bit Kernel,
  although some internal changes have taken place to minimise compile
  switches between the two cases. See Docs.32bit for more technical info.

  The hardest part was the flood-fill...

Other changes:
  Pointer shape changes now take place on the next VSync, rather than actually
  WAITING for the VSync. Turning the Hourglass on shouldn't slow your machine
  down by 5% now :)

  Lots of really crusty pre-IOMD code removed.

Admin:
  Tested in 32 and 26-bit forms in a limited desktop build. Basically, this
  will need to see a lot of use to iron out difficulties. I'd like anyone who
  has a non-frozen project to at least attempt using this Kernel.

Version 5.23. Tagged as 'Kernel-5_23'

This has been fixed. In addition, SMC669 and UMC669 chips are reported as
a different chip configuration by OS_ReadSysInfo 3 (values 4 and 5
respectively).
A few assertions added to catch the remaining cases where the RCMM stuff
won't work - those cases will involve a bit more reordering of hardware
initialisation.

Version 5.00. Tagged as 'Kernel-5_00'

When screen is blanked, DACs are turned off (60mA saving).
If DPMS state 3 comes on, sync lines are set low.

Version 4.96. Tagged as 'Kernel-4_96'