GitLab

Detail:
  A whole mass of changes to add high processor vectors + zero page relocation support to the Cortex branch of the kernel
  At the moment the code can only cope with two ZeroPage locations, &0 and &FFFF0000. But with a bit more tweaking those restrictions can probably be lifted, allowing ZeroPage to be hidden at almost any address (assuming it's fixed at compile time). If I've done my job right, these restrictions should all be enforced by asserts.
  There's a new option, HiProcVecs, in hdr/Options to control whether high processor vectors are used. When enabling it and building a ROM, remember:
  * FPEmulator needs to be built with the FPEAnchor=High option specified in the components file (not FPEAnchorType=High as my FPEmulator commit comments suggested)
  * ShareFS needs unplugging/removing since it can't cope with it yet
  * Iyonix users will need to use the latest ROOL boot sequence, to ensure the softloaded modules are compatible (OMAP, etc. don't really softload much so they're OK with older sequences)
  * However VProtect also needs patching to fix a nasty bug there - http://www.riscosopen.org/tracker/tickets/294
  The only other notable thing I can think of is that the ProcessTransfer code in s/ARM600 & s/VMSAv6 is disabled if high processor vectors are in use (it's fairly safe to say that code is obsolete in HAL builds anyway?)
  Fun challenge for my successor: Try setting ZeroPage to &FFFF00FF (or similar) so its value can be loaded with MVN instead of LDR. Then use positive/negative address offsets to access the contents.
  File changes:
  - hdr/ARMops - Modified ARMop macro to take the ZeroPage pointer as a parameter instead of 'zero'
  - hdr/Copro15ops - Corrected $quick handling in myISB macro
  - hdr/Options - Added ideal setting for us to use for HiProcVecs
  - s/AMBControl/allocate, s/AMBControl/growp, s/AMBControl/mapslot, s/AMBControl/memmap, s/AMBControl/service, s/AMBControl/shrinkp, s/Arthur2, s/Arthur3, s/ArthurSWIs, s/ChangeDyn, s/ExtraSWIs, s/HAL, s/HeapMan, s/Kernel, s/MemInfo, s/Middle, s/ModHand, s/MoreSWIs, s/MsgCode, s/NewIRQs, s/NewReset, s/Oscli, s/PMF/buffer, s/PMF/IIC, s/PMF/i2cutils, s/PMF/key, s/PMF/mouse, s/PMF/osbyte, s/PMF/oseven, s/PMF/osinit, s/PMF/osword, s/PMF/oswrch, s/SWINaming, s/Super1, s/SysComms, s/TickEvents, s/Utility, s/vdu/vdu23, s/vdu/vdudriver, s/vdu/vdugrafl, s/vdu/vdugrafv, s/vdu/vdupalxx, s/vdu/vdupointer, s/vdu/vduswis, s/vdu/vduwrch - Lots of updates to deal with zero page relocation
  - s/ARM600 - UseProcessTransfer option. Zero page relocation support. Deleted pre-HAL ClearPhysRAM code to tidy the file up a bit.
  - s/ARMops - Zero page relocation support. Set CPUFlag_HiProcVecs when high vectors are in use.
  - s/KbdResPC - Disable compilation of dead code
  - s/VMSAv6 - UseProcessTransfer option. Zero page relocation support.
Admin:
  Tested with OMAP & Iyonix ROM softloads, both with high & low zero page.
  High zero page hasn't had extensive testing, but boot sequence + ROM apps seem to work.


Version 5.35, 4.79.2.98.2.48. Tagged as 'Kernel-5_35-4_79_2_98_2_48'

Detail:
  Three main changes:
  * On odd-numbered (i.e. development) versions of the module, the UtilityModule will now take its date from the VersionNum file instead of using a hard-coded date.
  * All build versions now look for the new "extended ROM footer" (as created by romlinker 0.04+) at the end of the ROM image and use it to determine the ROM build date for return by OS_ReadSysInfo 9,2. Failing to find the build date in the footer will cause OS_ReadSysInfo 9,2 to return 0.
  * On odd-numbered versions, OS_Byte 0 will now use the ROM build date (as found in the extended footer) to generate the error block that's returned to the user. This seems OK as the PRM describes OS_Byte 0 as returning the "creation date of the operation system". Plus it's a convenient way of getting the ROM build date into the Switcher, since the switcher uses OS_Byte 0. If the extended footer can't be found (or if the string hasn't been initialised yet, e.g. before Service_PostInit) the code falls back to a hard-coded string containing the date from the VersionNum file.
  File changes:
  Makefile - Updated to not create the obsolete Time+Date file (previously used for the ROM build date)
  Version - Use date from VersionNum file for development builds
  hdr/Options - New UseNewFX0Error variable/option to make it easy to check which OS_Byte 0 variant should be enabled
  hdr/KernelWS - Added new string buffers & extended ROM footer pointer to workspace
  s/Middle - Updated OS_ReadSysInfo 9 code, and added utility functions for searching the extended ROM footer for certain tags
  s/NewReset - Added a couple of calls to initialise the new string buffers just prior to Service_PostInit. This is required since OS_Byte/OS_ReadSysInfo shouldn't enable interrupts, but date conversion relies on the Territory module, which may enable interrupts.
  s/PMF/osbyte - Updated OS_Byte 0 code
Admin:
  Tested in OMAP ROM, with and without the extended footer present.


Version 5.35, 4.79.2.98.2.41. Tagged as 'Kernel-5_35-4_79_2_98_2_41'

Detail:
  OS_IICOp (and in turn, RISCOS_IICOpV) now treat the top byte of R1 as containing the IIC bus number, allowing multiple buses to be used.
  hdr/KernelWS - Changed workspace a bit so that the kernel can support up to IICBus_Count buses (currently 3), each with its own IICBus_* block.
  s/HAL - Update Reset_IRQ_Handler to cope with interrupts from all IIC buses instead of just the first. Fix/update RISCOS_IICOpV description.
  s/NewIRQs - Update InitialiseIRQ1Vtable to set up interrupt handlers for all IRQ-supporting IIC buses
  s/NewReset - Get rid of the IICAbort call that was just before IICInit. IICInit now calls IICAbort itself.
  s/PMF/IIC - Bulk of the changes. Code now uses the IICBus_ structures instead of the IICStatus and IICType variables. Re-entrancy code has been updated to take into account the possiblity of multiple buses; when OS_IICOp calls are nested, the IIC transfers will be added to bus-specific queues instead of all going in the same queue. However only one queue will be processed at a time.
  s/ChangeDyn - Workspace shuffling means a couple of MOV's needed to be swapped with LDR's when getting immediate constants
Admin:
  Tested with OMAP & IOMD ROM builds.
  Both high & low-level bus types seem to work OK, along with re-entrancy, both on the same bus and on a different bus.


Version 5.35, 4.79.2.98.2.33. Tagged as 'Kernel-5_35-4_79_2_98_2_33'

Detail:
  hdr/Options - ARM6support and GetKernelMEMC values are now derived from the value of MEMM_Type
  s/ARMops, s/HAL - Code to detect and handle ARMv7 CPUs is now only enabled when using VMSAv6 MMU model. Saves us from having to deal with lack of myIMB, myDSB, etc. implementations on pre-ARMv6.
  s/HAL - Removed some debug code
  s/NewReset - Fix bug spotted by Tom Walker where R12 wasn't being restored by LookForHALRTC if a non-HAL RTC had already been found
  s/AMBControl/memmap - correct the assert clause that was checking that &FFE are the correct L2PT protection bits for non-VMSAv6 machines
Admin:
  Tested this kernel on a rev C2 beagleboard & Iyonix softload. Also compiled it into an IOMD ROM, but didn't try running it.


Version 5.35, 4.79.2.98.2.32. Tagged as 'Kernel-5_35-4_79_2_98_2_32'

Update Cortex kernel to use correct instruction/memory barriers and to perform branch target predictor maintenance. Plus tweak default CMOS settings.

Detail:
  hdr/Copro15ops - Added myISB, myDSB, myDMB macros to provide barrier functionality on ARMv6+
  s/ARMops, s/HAL, s/VMSAv6, s/AMBControl/memmap - Correct barrier operations are now performed on ARMv6+ following CP15 writes. Branch predictors are now also maintained properly.
  s/NewReset - Change default CMOS settings so number of CDFS drives is 0 in Cortex builds. Fixes rogue CDFS icon on iconbar.
Admin:
  Tested on rev C2 beagleboard


Version 5.35, 4.79.2.98.2.27. Tagged as 'Kernel-5_35-4_79_2_98_2_27'

Detail:
  s/NewReset - boot filing system now defaults to SCSIFS for the CortexA8 machine type. BeagleBoards, etc. should now be able to run their boot sequence if one is placed on a USB mass storage device.
Admin:
  Tested on rev C2 beagleboard.


Version 5.35, 4.79.2.98.2.26. Tagged as 'Kernel-5_35-4_79_2_98_2_26'

Detail:
  LookForHALRTC wasn't initialising R12 to point to the OS Byte workspace before calling CheckYear, and instead relying on the previous value. This resulted in the RTC initialisation breaking once HAL_InitDevices started doing things to corrupt R12.
Admin:
  Tested on rev C2 beagleboard


Version 5.35, 4.79.2.98.2.18. Tagged as 'Kernel-5_35-4_79_2_98_2_18'

Detail:
  HAL kernels (on the Cortex branch at least) now support HALDevice-based RTCs. If the kernels own RTC code is disabled or fails to detect an RTC, then after HAL_InitDevices is called the HALDevice list will be scanned for any HAL-resident RTC devices.
  Additionally, the RTCSupport flag (in Hdr:Machine.Machine), which was previously TRUE for all HAL kernels, can now be set to FALSE in HAL kernels to disable the kernels own IIC RTC code. This allows the unwanted legacy RTC code to be disabled for machines which are known to use HAL RTCs instead.
  hdr/RTCDevice - new header describing data structures used for HAL RTC device
  hdr/HALDevice - added RTCDevice device type, IIC serial bus type
  hdr/KernelWS - upgraded RTCFitted from a 1 byte field to 4 byte. It now stores either a null value (for no RTC), a value <2048 for an IIC RTC address, or a value >= 2048 for a RTCDevice ptr
  Makefile - added header export of hdr/RTCDevice
  s/GetAll - include hdr/RTCDevice
  s/NewReset - initialise HAL RTC after HAL_InitDevices if required
  s/PMF/i2cutils, s/PMF/osinit, s/PMF/osword - modifications to allow use of HAL RTC (and disallow use of builtin IIC RTC)
Admin:
  Tested on rev C2 beagleboard


Version 5.35, 4.79.2.98.2.11. Tagged as 'Kernel-5_35-4_79_2_98_2_11'

Detail:
  s/ARM600 - fix to SyncCodeAreasRange to correctly read cache line length for WB_CR7_Lx caches
  s/ARMops - Cortex cache handling fixes. Enable L2 cache for Cortex.
  s/ChangeDyn - VMSAv6 support in AllocateBackingLevel2
  s/HAL - Improve RISCOS_InitARM to set/clear correct CP15 flags for ARMv6/v7. VMSAv6 support in code to generate initial page tables.
  s/NewReset - Extra DebugTX calls during OS startup. Disable pre-HAL Processor_Type for HAL builds.
  s/VMSAv6 - Main VMSAv6 MMU code - stripped down version of s/ARM600 with support for basic VMSAv6 features.
  hdr/Options - Use VMSAv6 MMU code, not ARM600. Disable ARM6support since current VMSAv6 code will conflict with it.
Admin:
  Tested basic OS functionality under qemu-omap3 and revision B6 beagleboard.


Version 5.35, 4.79.2.98.2.3. Tagged as 'Kernel-5_35-4_79_2_98_2_3'

* Added use of CDVPoduleIRQs (from Hdr:Machine)
* Fixed checksum corruption in OS_NVMemory block writes ending just below
  the checksum byte.
* Fixed R4 corruption by OS_Byte 162 with certain HALs.

Version 5.35, 4.79.2.71. Tagged as 'Kernel-5_35-4_79_2_71'

  [Not fully implemented - for now leaves at least 16MB free if only
  one RAM area; was 1MB].
* Added HAL_USBControllerInfo, HAL_MonitorLeadID and HAL_Video_Render.
* Added HAL->OS call OS_IICOpV.
* OS_MMUControl now allows independent control of I and C bits.
* Added facility to deactivate keyboard debounce (magic word "NoKd" in
  R2 in KeyV 0).
* Fixed problem with RAM amounts not a multiple of 4MB.
* Supremacy bit (in VDU 19) now sets all 8 bits of supremacy.
* Added PaletteV 14 (reads gamma tables).
* Added Supremacy transfer functions (like gamma correction, but for
  supremacy). Allows easy global supremacy effects in a mode-independent
  fashion. Controlled with PaletteV 15,16.
* Added modes 50-53 (320x240, 1,2,4,8bpp). Intended for small LCD.
* Added 13.5kHz versions of TV modes (selected by Hdr:Machine).
* Upped desktop version to 5.06.

Version 5.35, 4.79.2.66. Tagged as 'Kernel-5_35-4_79_2_66'

Added "fast" flash tool for Customer L, allowing ROMs to be sent serially at
115200 baud not 9600 baud.
Fix to VDU despatch for ARMv4 and later.
Fixes to power on delete keyboard and keyboard timeout
Implemented MemoryReadPhys and MemoryAmounts with the HAL.

Version 5.35, 4.79.2.59. Tagged as 'Kernel-5_35-4_79_2_59'

OSDelink/RelinkApp now work on the list in opposite orders so that the order of vector claims doesn't get toggled.

Fix for *FX5 not working due to a TST having been swapped for CMP.
Checkprotectionlink option added to HAL version so CMOS lock is
implemented.
Updated HAL docs.

Version 5.35, 4.79.2.58. Tagged as 'Kernel-5_35-4_79_2_58'

Detail:
  * Merged in the change to RISC OS 4.02 kernel that moved the GSTrans
    workspace out of scratch space.
  * Fixed a few bugs in callback postponement, and interrupt holes in
    callback dispatch. See Docs.CallbackChange for full info.
  * Fixed SystemSizeCMOS to SysHeapCMOS - wouldn't build as was.
  * Added an export of a C version of Hdr:HALDevice, based on the Hdr2H
    translation but with an additional struct definition. Required by
    SoundControl 1.00.
  * Added some additional location and ID allocations to Hdr:HALDevice.
    Required by today's HAL and SoundControl.
Admin:
  Partially tested.

Version 5.35, 4.79.2.56. Tagged as 'Kernel-5_35-4_79_2_56'

*Configure ANYTHINGsize was broken due to not setting R0 to ReadUnsigned
IIC ack message uninternationalised
OS_Memory was saying we only had 4M of RAM
VDU4 scrolling when output was switched to sprite was causing corruption
on use of CTRL-J and CTRL-K
Default SystemSize CMOS set to 32k

Version 5.35, 4.79.2.55. Tagged as 'Kernel-5_35-4_79_2_55'

Detail:
  Lots of changes since last version, at least the following:
  * Updated OS timestamp, removed alpha status
  * Negative INKEY OS version changed to &AA
  * GraphicsV is now alocated vector number &2A
  * ROM moved up to &FC000000
  * Max application slot increased to 512 Mbytes (for now)
  * Max size of RMA increased to 256 Mbytes
  * RMA is now first-created dynamic area (so it gets lowest address after
    top of application slot)
  * OS_Memory 10 reimplemeted
  * New OS_ReadSysInfo 6 values 18-22 added
  * OS_ReadSysInfo 8 gains flag bit to indicate soft power-off
  * Misc internal top-bit-set-address fixes
  * *ChangeDynamicArea can take sizes in megabytes or gigabytes
  * Magic word "&off" in R0 passed to OS_Reset powers down if possible
  * Added acceleration: block copy; CLS; text window scroll up; rectangle
    fill
  * Disabled LED flashing in page mode (liable to crash)
  * Masked sprite plot and VDU 5 text avoids reading the screen if possible
  * Framestore made USR mode accessible
  * Fix for VDU 5,127 bug - now relies on font definitions being in extreme
    quarters of memory, rather than bottom half
  * Allocated 64-bit OS_Convert... SWIs
  * IIC errors use allocated error numbers
  * Looks for Dallas RTC before Philips RTC because we're using a Philips
    NVRAM device with the same ID
  * Fix to bug that meant the oscillator in the Dallas RTC wasn't enabled
  * Default mouse type (USB) changed to allocated number
  * Ram disc max size increased to 128 Mbytes (Ursula merge) and made
    cacheable for StrongARMs (not XScale)
  * Branch through zero handler now works in USR mode, by use of a
    trampoline in the system stack to allow PC-relative register storage
  * Address exception handler changed to not use 0 as workspace
  * OS_Memory 13 extended to allow specification of cacheability and access
    privileges
  * Added OS_Memory 16 to return important memory addresses
  * RISCOS_MapInIO() takes cacheable flag in bit 3, access permissions in
    bits 10 and 11, doubly-mapped flag in bit 20, and access permissions
    specified flag in bit 21
  * Bug fix in last version for application abort handlers didn't quite
    work; register shuffle required
  * "Module is not 32-bit compatible" error now reports the module name
  * Default configured language changed from 10 to 11 (now Desktop again)

Version 5.35, 4.79.2.51. Tagged as 'Kernel-5_35-4_79_2_51'

Detail:
  * Implemented OS_Hardware 2, 3 and 4 as described in Docs.HAL.NewAPI.
  * Added new OS->HAL and HAL->OS routines to register HAL devices with the
    OS during hard resets.
  * Updated Docs.HAL.NewAPI to correct inconsistencies, fill in missing
    definitions, and allow for interrupt sharing.
  * Now uses OS_LeaveOS to trigger callbacks after ROM module init.
Admin:
  Untested. Requires new HAL.

Version 5.35, 4.79.2.49. Tagged as 'Kernel-5_35-4_79_2_49'

Version 5.35, 4.79.2.48. Tagged as 'Kernel-5_35-4_79_2_48'

Ursula. Quite a hairy code merge really, so let's hope it is
worth it to someone. What you get (back after 2 or 3 years):
- much more efficient for largish numbers of DAs (relevance
  to current build = approx 0)
- fancy reason codes to support fast update of
  Switcher bar display (relevance = 0)
- support for clamped maximum area sizes, to avoid address
  space exhaustion with big memory (relevance = 0)
- better implementation of shrinkable DAs, performance
  wise (if lots of DAs, relevance = approx 0)
- support for 'Sparse' DAs. Holey dynamic areas, Batman!
  (relevance, go on someone use the darned things)
Moderately development tested on HAL/32bit ARM9 desktop.
Note the Switcher should be compiled to use the new
reason codes 6&7, for fabled desktop builds.

Also, during this work, so I could see the wood for the
trees, redid some source code clean up, removing pre-Medusa
stuff (like I did about 3 years ago on Ursula, sigh). That's
why loads of source files have changed. The new DA stuff
is confined pretty much to hdr.KernelWS and s.ChangeDyn.

Ta.

Version 5.35, 4.79.2.38. Tagged as 'Kernel-5_35-4_79_2_38'

Look for LongCommandLine flag, command line size currently
set at 1k.
For HAL/32bit builds, the kernel buffer space is at high
(top bit set) address, which may break some code using signed
comparisons. So *beware* that there may be some latent
bugs in old kernel code using these buffers, not yet found.
One such bug, in s.Arthur2 found and fixed.
Tested moderately on ARM9 desktop build.
Lovely to reimplement things I did two and half years ago.

Version 5.35, 4.79.2.37. Tagged as 'Kernel-5_35-4_79_2_37'

* Allows HAL-driven software resets.
* Sound buffers corrected to be uncacheable.

Version 5.35, 4.79.2.33. Tagged as 'Kernel-5_35-4_79_2_33'

* Kernel puts sensible default FIQ handler in through the HAL.
* Fix to temporary page uncaching code.

Version 5.35, 4.79.2.30. Tagged as 'Kernel-5_35-4_79_2_30'

Version 5.35, 4.79.2.20. Tagged as 'Kernel-5_35-4_79_2_20'

An attempt to do NVMemory by using part of the Flash that the OS is sitting
in for Customer L. Programming algorithm works, but I'm not confident that the
Kernel does the right thing yet.

Version 5.35, 4.79.2.19. Tagged as 'Kernel-5_35-4_79_2_19'

First attempt at ARM9 support, and general clean-up of old ARM-specific code, now using vectored ARMops.

Not tested.

Version 5.35, 4.79.2.14. Tagged as 'Kernel-5_35-4_79_2_14'

Check-in of the few last-minute changes for the Customer L demo. Nothing exciting, apart from an extended touchscreen API.

Version 5.35, 4.79.2.13. Tagged as 'Kernel-5_35-4_79_2_13'

more use of ARMops in page manipulation, change register usage of ARmops tested by kernel boot to star prompt only

Version 5.35, 4.79.2.11. Tagged as 'Kernel-5_35-4_79_2_11'

More stuff. Up to the desktop now; cache on, working keyboard. Some source restructuring to start to make splitting it up into several object files more feasible.

It says "Abort on data transfer".

Detail:
  Added the HAL NVRAM entries.
  Modified i2cutils to use the HAL entries for NVRAM and behave sensibly if the HAL reports that there is no NVRAM, in which case there must be a forced reset_cmos call so that the cache gets set up sensibly.
Admin:
  Tested under the RPC emulator and appears to be working correctly, although some calls to IIC are still being made in the no nvram case.

Version 5.35, 4.79.2.8. Tagged as 'Kernel-5_35-4_79_2_8'

Version 5.35, 4.79.2.5. Tagged as 'Kernel-5_35-4_79_2_5'

Version 5.35, 4.79.2.2. Tagged as 'Kernel-5_35-4_79_2_2'

* Added ARM_IMB and ARM_IMBRange SWIs as recommended by ARMv5.
* Some early prototype HAL bits popped in - a lot of source restructuring still
  to come.
* New debug target creates an AIF image with debug information, and translates
  this into an ASCII object file for the 16702B logic analyser.

Version 5.35, 4.79.2.1. Tagged as 'Kernel-5_35-4_79_2_1'

  Added common error cache.
Detail:
  Fixed module header validation code which was broken in 5.22.  This
    shouldn't have caused much of a problem as it was only a bizarre
    check (SWI chunk looked valid but SWI handler was 0) that would
    have failed - but be reported as a valid set of SWI entries.
  Added common error message cache.  Several common errors (Buffer
    overflow; Number not recognised; Bad vector release; and a couple
    of others) are now cached the first time they are translated into
    a block of memory in the system heap.
Admin:
  Tested in Ursula build - cacheing only active in Ursula build - change
    HdrSrc if you want it in your products too.
  Requires HdrSrc 0.94

Version 5.31. Tagged as 'Kernel-5_31'

Detail:

  * Lazarus builds of the Kernel failed with the following error:

      Immediate value out of range at line 458 in file "s.NewReset"
              ADR    R2, IRQ_Test_CTRL_or_R_Pressed

    This is due to the ADR going out of range.  Changed to use ADDR
    macro instead to rectify this.

Admin:

  * Untested at time of check-in; to be verified in next Lazarus development
    build.

Version 5.25. Tagged as 'Kernel-5_25'

  RPCEm update.
* Register allocation in default ErrorV handler fixed - problems occured when
  callbacks were triggered on way out.
* OS_Byte 19 didn't manipulate interrupt disable flag correctly in 26-bit
  builds.
* Stray bit of debugging left in sprite code many years ago removed.

Version 5.23. Not tagged