GitLab

Detail:
  This change gets rid of the following switches from the source (picking appropriate code paths for a desktop build):
  * STB
  * RO371Timings
  * NormalSpeedROMS
  * AutoSpeedROMS
  * RISCPCBurstMode
  * InterlacedPointer
  * ParallelFlashUpgrade (and s/FlashROM file)
  * Embedded_UI
  Some of the deleted code might be worth revisiting in future:
  * OS_ReadSysInfo 4 support for storing the MAC in alternate CMOS locations (including 2nd copy for error checking) or fetching via Service_MachineAddress
  * Mouse handling changes, possibly aimed at hiding the mouse pointer if a mouse isn't connected
  * More strict CMOS validation in s/NewReset
Admin:
  Identical binary to previous revision for IOMD & Raspberry Pi builds


Version 5.50. Tagged as 'Kernel-5_50'

Detail:
  This change gets rid of the following switches from the source (picking appropriate code paths for a 32bit HAL build):
  * HAL
  * HAL26
  * HAL32
  * No26bitCode
  * No32bitCode
  * IncludeTestSrc
  * FixR9CorruptionInExtensionSWI
  Various old files have also been removed (POST code, Arc/STB keyboard drivers, etc.)
Admin:
  Identical binary to previous revision for IOMD & Raspberry Pi builds


Version 5.49. Tagged as 'Kernel-5_49'

Detail:
  Resources/UK/Messages, hdr/KernelWS, s/Kernel - On return from a SWI with V set, do some basic validity checks on the error pointer in order to try and catch buggy SWIs that return bad pointers or invalid error blocks. If a bad pointer is found we'll substitute it with a pointer to a different error block, which has the SWI number in the error message, to allow the user to identify the source of the problem. (There's also a chance we'll crash when investigating a bad pointer, but crashing here in the kernel is preferable to crashing elsewhere because R12 should still contain the SWI number)
  hdr/OSMisc - Define SeriousErrorV reason codes and extended ROM footer entry IDs
  hdr/Options - Remove HangWatch integration flag, obsolete now that SeriousErrorV is available
  s/ArthurSWIs - Keep defaultvectab up to date with vector allocations
  s/Middle - Update serious error handling to call SeriousErrorV at several key points. This allows for accurate crash dumps to be obtained, along with a mechanism to warn low-level components such as RTSupport that the privileged mode stacks are being flattened.
  s/Middle - Add OS_ReadSysInfo 15, for enumerating extended ROM footer entries
  s/PMF/osbyte - Update InitNewFX0Error to use the ROM footer entry ID defined in hdr/OSMisc
Admin:
  Tested on Pi 1B, 2B, 3B


Version 5.35, 4.79.2.313. Tagged as 'Kernel-5_35-4_79_2_313'

Detail:
  Rather than fill the Kernel sources with an ever-increasing number of
  platform-specific switches to control the default CMOS settings, this
  change introduces a variable which passes the requirements direct from
  the Components file to the Kernel. Since it uses a comma-separated list
  of address/value pairs, it is inherently extensible. All the symbolic
  names of addresses from Hdr:CMOS are available, and any valid objasm
  expression can be used for the value.
Admin:
  This removes the need for the EnforceSCSI4 switch, and leaves almost
  no uses of the Machine variable in the Kernel either.


Version 5.35, 4.79.2.298. Tagged as 'Kernel-5_35-4_79_2_298'

Detail:
  Default to SCSI::4 for boot driver is custom switch at buildtime
  (EnforceSCSI4) is defined. 2 fontcache items also defaulted with this switch
Admin:
  tested on iMx6


Version 5.35, 4.79.2.290. Tagged as 'Kernel-5_35-4_79_2_290'

Detail:
  This set of changes adds support for "physical memory pools" (aka PMPs), a new type of dynamic area which allow physical pages to be claimed/allocated without mapping them in to the logical address space. PMPs have full control over which physical pages they use (similar to DAs which request specific physical pages), and also have full control over the logical mapping of their pages (which pages go where, and per-page access/cacheability control).
  Currently the OS makes use of two PMPs: one for the free pool (which now has a logical size of zero - freeing up gigabytes of logical space), and one for the RAM disc (logical size of 1MB, allowing for a physical size limited only by the amount of free memory)
  Implementing these changes has required a number of other changes to be made:
  * The CAM has been expanded from 8 bytes per entry to 16 bytes per entry, in order to allow each RAM page to store information about its PMP association
  * The system heap has been expanded to 32MB in size (from just under 4MB), in order to allow it to be used to store PMP page lists (1 word needed per page, but PMP pages may not always have physical pages assigned to them - so to allow multiple large PMPs to exist we need more than just 1 word per RAM page)
  * The &FA000000-&FBFFFFFF area of fixed kernel workspace has been shuffled around to accomodate the larger CAM, and the system heap is now located just above the RMA.
  * SoftResets code stripped out (unlikely we'll ever want to fix and re-enable it)
  * A couple of FastCDA options are now permanently on
  * Internal page flags shuffled around a bit. PageFlags_Unavailable now publicly exposed so that PMP clients can lock/unlock pages at will.
  * When OS_ChangeDynamicArea is asked to grow or shrink the free pool, it now implicitly converts it into a shrink or grow of application space (which is what would happen anyway). This simplifies the implementation; during a grow, pages (or replacement pages) are always sourced from the free pool, and during a shrink pages are always sent to the free pool.
  File changes:
  - hdr/KernelWS - Extend DANode structure. Describe CAM format. Adjust kernel workspace.
  - hdr/OSRSI6, s/Middle - Add new item to expose the CAM format
  - hdr/Options - Remove SoftResets switch. Add some PMP switches.
  - s/ARM600, s/VMSAv6 - Updated for new CAM format. Note that although the CAM stores PMP information, BangCamUpdate currently doesn't deal with updating that data - it's the caller's responsibility to do so where appropriate.
  - s/ChangeDyn - Lots of changes to implement PMP support, and to cope with the new CAM format.
  - s/HAL - Updated to cope with new CAM format, and lack of logical mapping of free pool.
  - s/MemInfo - Updated to cope with new CAM format. OS_Memory 0 updated to cope with converting PPN to PA for pages which are mapped out. OS_Memory 24 updated to decode the access permissions on a per-page basis for PMPs, and fixed its HWM usage for sparse DAs.
  - s/NewReset - Soft reset code and unused AddCamEntries function removed. Updated to cope with new CAM format, PMP free pool, PMP RAMFS
  - s/AMBControl/allocate - Update comment (RMA hasn't been used for AMBControl nodes for a long time)
  - s/AMBControl/growp, s/AMBControl/memmap, s/AMBControl/shrinkp - Update for new CAM format + PMP free pool
  - s/vdu/vdudriver - Strip out soft reset code.
Admin:
  Tested on Pandaboard
  This is just a first iteration of the PMP feature, with any luck future changes will improve functionality. This means APIs are subject to change as well.


Version 5.35, 4.79.2.284. Tagged as 'Kernel-5_35-4_79_2_284'

Detail:
  Makefile, hdr/Options - By default enable high processor vectors/zero page relocation for compatible machines, but also allow the components file to override the setting if required
  s/ChangeDyn - Fix OS_DynamicArea 20 to check the correct range for doubly mapped areas, and to correctly localise its error message
Admin:
  Tested on Iyonix


Version 5.35, 4.79.2.268. Tagged as 'Kernel-5_35-4_79_2_268'

With ProtectStationID turned on there are no routes to writing the Econet station (or bottom octect of the IP address), a function previously fulfilled by the SetStation utility which pokes the hardware directly and doesn't fit into a HAL model.
Add a new subreason to OS_NVMemory to perform this role. This SWI appeared for RISC OS 5.00, and errors unsupported subreasons, so there's a means of run tim selecting its use by checking the platform class and trying the SWI. All RISC OS 5 based platforms can always be upgraded to this version, since they're all still being maintained.

hdr/Options: move the switch with the other options from osinit.s
i2cutils.c: new subreason

Ditch the 'ObsoleteNC1CMOS' switch, if it was obsolete for NC1, it's certainly obsolete now.
Ditch unmaintained messages files for Morris4/Omega/Ursula projects.
Tested on a Risc PC.

Version 5.35, 4.79.2.247. Tagged as 'Kernel-5_35-4_79_2_247'

OSEntries.h: added a C structure for RISCOS_IICOpV.
GPIODevice.hdr: allocate Pandora and Pi Compute module sub device nos.
HALDevice.hdr/Options.hdr: tabs expanded, capitalised abbreviations.
Not tagged.

Add more HAL USB definitions to hdr/HALEntries. Add debug option for calling HangWatch_Dump on serious errors.

Detail:
  hdr/HALEntries - Added definition of the struct returned by HAL_USBControllerInfo
  hdr/Options, s/Middle - Added the option to call HangWatch_Dump on serious errors
Admin:
  Tested on BB-xM


Version 5.35, 4.79.2.235. Tagged as 'Kernel-5_35-4_79_2_235'

Detail:
  s.NewReset line 1304 amended to use this variable. It was
  hard codede to 128MB as a compromise between address space reservation and size.
Admin:
  Tested OK to expand to 511MB in task manager. At 512MB the taskmanager window fails.
JB

Version 5.35, 4.79.2.234. Tagged as 'Kernel-5_35-4_79_2_234'

Detail:
  hdr/Options, s/ArthurSWIs, s/ChangeDyn, s/PMF/KbdDrA1, s/PMF/key, s/vdu/vdugrafa, s/vdu/vdugrafd, s/vdu/vdugrafhal, s/vdu/vdugrafv, s/vdu/vdumodes, s/vdu/vduwrch:
  - Strip out DoingVdu build switch (did nothing)
  - Strip out Japanese16BitSound switch (did nothing)
  - Strip out MakeModeSelectorsForModeNUmbers switch (altered the mode list structures, but there wasn't any code to do anything with the new data)
  - Strip out remaining uses of UseGraphicsV switch (now hardwired to {TRUE})
  - Strip out ShadowROM switch (altered FixedAreasTable to show the shadow mapping, but code to create the mapping is missing)
  - Strip out PollMouse switch (old Archimedes-era debug/development option)
Admin:
  Tested on BB-xM
  Builds to same binary as previous version


Version 5.35, 4.79.2.204. Tagged as 'Kernel-5_35-4_79_2_204'

Detail:
  This set of changes:
  * Adds basic support for multiple GraphicsV drivers, by way of some new OS_ScreenMode reason codes for registering/deregistering, selecting and enumerating drivers (11, 64-68)
  * Tidies up handling of HAL video calls so that the HAL calls will be transformed into a bona fide GraphicsV driver if they're implemented
  * Changes handling of 16bpp gamma table entries so that they're sent to GraphicsV in a generic form instead of in a VIDC-specific form
  * Adds a new GraphicsV call and defines new VIDC list items to allow GraphicsV drivers to utilise the new pixel formats
  File changes:
  * h/VIDCList, hdr/VIDCList, Makefile - Add new header export containing VIDC list type 3 definitions, to avoid repeated definitions in other components
  * Resources/UK/Messages - Add new GraphicsV/OS_ScreenMode error strings and some missing processor type strings
  * hdr/KernelWS - Clean up some pre-GraphicsV definitions, and add new workspace locations for storing the current GraphicsV driver number and the driver list
  * hdr/Options - Remove obsolete InverseTextTransparency option
  * hdr/VduExt - Add VDU variable 192 for storing GraphicsV driver number (same as ROL's VideoV driver number). Remove old 'Flag_*' mode flag definitions (use new 'ModeFlag_*' defintions instead). Add new OS_ScreenMode reason codes.
  * s/ARM600, s/VMSAv6, s/vdu/vdu23, s/vdu/vdugrafa, s/vdu/vdugrafd, s/vdu/vdupalxx, s/vdu/vdupointer, s/vdu/vduwrch - Strip out pre-GraphicsV code. Update GraphicsV code to use correct driver number.
  * s/ArthurSWIs - Pass the default GraphicsV claimant the VduDriverWorkSpace instead of ZeroPage
  * s/Getall - Add Hdr:VIDCList and s/vdu/VduGrafHAL to list of GETs
  * s/NewIRQs - Remove HAL VSync IRQ initialisation, is now handled by grafvhal. Remove old HAL VsyncIRQ entry point, all VSyncs are now handled by VsyncIRQ_ExtEntry.
  * s/PMF/osbyte - Stop OS_Byte 19 waiting forever if no video driver is active
  * s/PMF/osinit - Remove HAL VSync IRQ initialisation, is now handled by grafvhal
  * s/vdu/vducursoft - Use new workspace variable names and flag names
  * s/vdu/vdudecl - Remove old HALDAG_* definitions, GVDAG_* definitions are used instead. Add definition of the per-driver workspace structure and flags.
  * s/vdu/vdudriver - Remove pre-GraphicsV code. Update InitialiseMode to check for and initialise a HAL driver. Use cached driver features word in a few places instead of calling GraphicsV each time. Update PalIndexTable to disable VIDC mangling of 16bpp gamma tables.
  * s/vdu/vdugrafv, s/vdu/vdugrafhal - HAL<->GraphicsV code split off into its own file (vdugrafhal). Default GraphicsV claimant now only deals with VSync events for the active driver.
  * s/vdu/vdumodes - Get rid of old VIDC List type 3 definiton; now in hdr/VIDCList
  * s/vdu/vduswis - Added OS_ScreenMode reason codes 11 and 64-68 for registering, deregistering, selecting and enumerating GraphicsV drivers. Update mode set code to not bother checking if the driver supports the pixel format; instead we assume that the driver's vet mode call will do the check for us.
Admin:
  Tested in Tungsten, IOMD, OMAP3 & BCM2835 ROMs
  Requires HdrSrc-2_38 and updated video driver modes


Version 5.35, 4.79.2.203. Tagged as 'Kernel-5_35-4_79_2_203'

hdr/ExportVals: the copyright header insertion got a bit confused with some of the file contents
TickEvents.s: a bad merge from Ursula branch 4.1.4.2 to trunk 4.2 left behind unmatched push/pull where TickIrqReenter had been removed
hdr/Options & NewIRQs.s: collapse remaining TickIrqReenter switches
osinit.s: when ZeroPage is in a top bit set address only the last buffer pointer would get zeroed

Tip offs from eagle eyed Tim Baldwin.

Version 5.35, 4.79.2.201. Tagged as 'Kernel-5_35-4_79_2_201'

hdr/Options: Switch removed
s/Modhand: Switch removed, now considered equivalent to DebugROMInit. DebugROMInit changed so that the callback ordering is as expected, batched up until "callbacks" is hit after Service_PostInit.
PMF/osbyte: Redundant RISC OS 2.01 code deleted

Version 5.35, 4.79.2.184. Tagged as 'Kernel-5_35-4_79_2_184'

SystemName, ROMSizeOffset, HAL32, HAL26 only used here, moved here.
Remove uses of "M_" booleans, apparently that's bad form.
Fix SWIDespatch_Size for the non thumb capable case (was ASSERTing).
Swapped UserMemStart for AppSpaceStart.
Removed last use of OldComboSupport (pre Medusa!).
Removed switch 'CDVPoduleIRQs', a correction to the machine definitions mean this can now simply be switched on NumberOfPodules (previously, IOMD couldn't chain podule interrupts).
Take out disabled sub interrupt support - it's in CVS if you want to try to get it working.
Moved ConfiguredLang to 11 for everyone, it only matters if !Boot fails, and no harm in making it common for 5.xx onwards.

Version 5.35, 4.79.2.183. Tagged as 'Kernel-5_35-4_79_2_183'

OS_CallAfter and OS_CallEvery were treating the delay in R0 as a signed number, limiting its possible range. The PRM didn't require this (a -ve delay doesn't make sense, so implicitly times are unsigned), reworked to allow times up to 0xFFFFFBFF.
Aside:
  OSLib exports these functions as 'int', but it doesn't seem to make a distinction for unsigned versus signed anyway (other unsigned arguments are plain int too)
  The 'callx' library was already prototyped with unsigned times back in 1997

Added comment to hdr/Options about FirstUnpluggableModule - since the keyboard and mouse drivers got moved out of the kernel in 3.50, the original intent (to not allow you to unplug vital modules) has long since been lost, and really the only use of this value is to save 8 bits of CMOS frugal bits.

Version 5.35, 4.79.2.181. Tagged as 'Kernel-5_35-4_79_2_181'

Permits applications to query what value would be used in the event of a CMOS reset for a given configure value. Notably, the configure plugins will use this in favour of 'ResetCMOS'.
hdr/Options: retire the 'Select16BitSound' switch, add comment for ChecksumCMOS switch
hdr/KernelWS: DuffEntry and Nowhere moved here
Kernel.s: Unused OSMD removed, retire single use of SPIRQ in favour of r13_irq
Middle.s: Retire SPIRQ
NewReset.s: Trim out 300+ lines of CMOS reset defaults, call OS_NVMemory 6 instead
PMF/i2cutils.s: CMOS reset default code and table moved here with refactoring
Note, the previous code preserved YearCMOS during the zeroing, only to unconditionally write it later - so have removed it from the zeroing step.
Note, the locations 80-111 are now considered as system CMOS in the allocations hence are now wiped too (previously they got skipped as user CMOS during R-power-on).

Tested on OMAP3 ROM with delete-power-on and R-power-on variants, and a simple BASIC program to read locations 0-255 via OS_NVMemory.

Version 5.35, 4.79.2.180. Tagged as 'Kernel-5_35-4_79_2_180'

Default CMOS tweaks now apply for the RPi hardware. Was missed in
the previous commit.

You can now build the Kernel without the ROM debug output stuff
that's enabled for odd-numbered builds, by passing FREEZE_DEV_REL=TRUE
into the makefile. For example, in the Components file, you'd add:

  -options FREEZE_DEV_REL=TRUE

onto the Kernel line.

Version 5.35, 4.79.2.171. Tagged as 'Kernel-5_35-4_79_2_171'

Version 5.35, 4.79.2.147.2.19. Tagged as 'Kernel-5_35-4_79_2_147_2_19'

The kernel already looks after all other aspects of the ARM CPU, so can look after the cache control command too.
 HelpStrs.s:New tokens for help and syntax
 CmdHelp.s:UK help and syntax
 Arthur3.s:Tables updates for *CONFIGURE/STATUS, lined some stuff up, default error text sync'd with Hdr:NewErrors
 MoreComms.s:Parsing and doing of *CACHE
 Utility.s:Hashing table updated for *CACHE
Other minor changes
 hdr/Options:Bring 'MosVer' into the private header
 hdr/RISCOS:aasm aliases for SP removed, MainVars and MosVer made private, added definition of the start of application space
 HeapMan.s:Use of GRAB changed to Pull
 Offset of TutuCMOS changed for more informative PrintSoundCMOS
 PMF/osbyte.s:Use OsBytes header file in place of MainVars

Version 5.35, 4.79.2.151. Tagged as 'Kernel-5_35-4_79_2_151'

  1: Added HAL_FramebufferAddress entry.
  2: Minor mod the NoIrqVecSwiDispatch mods recently submitted. Improved coverage
  3: Added compile time switch InverseTextTransparency to toggle sense of text
  (pre-wimp) for use until correct transparency behaviour is introduced in the RPi
  start.elf.
  4: Ensured that if a non aligned frame buffer is reported, ALL of the space
  is actually mapped in.
Detail:
  (list files and functions that have changed)
Admin:
  builds and runs .. Still needs service_mode extension work to replace hard
  coded mode definition files
  (highlight level of testing that has taken place)
  (bugfix number if appropriate)


Version 5.35, 4.79.2.147.2.5. Tagged as 'Kernel-5_35-4_79_2_147_2_5'

Version 5.35, 4.79.2.131. Tagged as 'Kernel-5_35-4_79_2_131'

Export less in hdr:RISCOS.
Delete unused GetDecimalPair routine.
Move CheckYear with other RTC stuff out of PMF/osword.
Hide DebugROMInit and DebugROMErrors in release (even numbered) versions.

Version 5.35, 4.79.2.127. Tagged as 'Kernel-5_35-4_79_2_127'

Detail:
  A whole mass of changes to add high processor vectors + zero page relocation support to the Cortex branch of the kernel
  At the moment the code can only cope with two ZeroPage locations, &0 and &FFFF0000. But with a bit more tweaking those restrictions can probably be lifted, allowing ZeroPage to be hidden at almost any address (assuming it's fixed at compile time). If I've done my job right, these restrictions should all be enforced by asserts.
  There's a new option, HiProcVecs, in hdr/Options to control whether high processor vectors are used. When enabling it and building a ROM, remember:
  * FPEmulator needs to be built with the FPEAnchor=High option specified in the components file (not FPEAnchorType=High as my FPEmulator commit comments suggested)
  * ShareFS needs unplugging/removing since it can't cope with it yet
  * Iyonix users will need to use the latest ROOL boot sequence, to ensure the softloaded modules are compatible (OMAP, etc. don't really softload much so they're OK with older sequences)
  * However VProtect also needs patching to fix a nasty bug there - http://www.riscosopen.org/tracker/tickets/294
  The only other notable thing I can think of is that the ProcessTransfer code in s/ARM600 & s/VMSAv6 is disabled if high processor vectors are in use (it's fairly safe to say that code is obsolete in HAL builds anyway?)
  Fun challenge for my successor: Try setting ZeroPage to &FFFF00FF (or similar) so its value can be loaded with MVN instead of LDR. Then use positive/negative address offsets to access the contents.
  File changes:
  - hdr/ARMops - Modified ARMop macro to take the ZeroPage pointer as a parameter instead of 'zero'
  - hdr/Copro15ops - Corrected $quick handling in myISB macro
  - hdr/Options - Added ideal setting for us to use for HiProcVecs
  - s/AMBControl/allocate, s/AMBControl/growp, s/AMBControl/mapslot, s/AMBControl/memmap, s/AMBControl/service, s/AMBControl/shrinkp, s/Arthur2, s/Arthur3, s/ArthurSWIs, s/ChangeDyn, s/ExtraSWIs, s/HAL, s/HeapMan, s/Kernel, s/MemInfo, s/Middle, s/ModHand, s/MoreSWIs, s/MsgCode, s/NewIRQs, s/NewReset, s/Oscli, s/PMF/buffer, s/PMF/IIC, s/PMF/i2cutils, s/PMF/key, s/PMF/mouse, s/PMF/osbyte, s/PMF/oseven, s/PMF/osinit, s/PMF/osword, s/PMF/oswrch, s/SWINaming, s/Super1, s/SysComms, s/TickEvents, s/Utility, s/vdu/vdu23, s/vdu/vdudriver, s/vdu/vdugrafl, s/vdu/vdugrafv, s/vdu/vdupalxx, s/vdu/vdupointer, s/vdu/vduswis, s/vdu/vduwrch - Lots of updates to deal with zero page relocation
  - s/ARM600 - UseProcessTransfer option. Zero page relocation support. Deleted pre-HAL ClearPhysRAM code to tidy the file up a bit.
  - s/ARMops - Zero page relocation support. Set CPUFlag_HiProcVecs when high vectors are in use.
  - s/KbdResPC - Disable compilation of dead code
  - s/VMSAv6 - UseProcessTransfer option. Zero page relocation support.
Admin:
  Tested with OMAP & Iyonix ROM softloads, both with high & low zero page.
  High zero page hasn't had extensive testing, but boot sequence + ROM apps seem to work.


Version 5.35, 4.79.2.98.2.48. Tagged as 'Kernel-5_35-4_79_2_98_2_48'

Detail:
  s/Middle - Added some new OS_ReadSysInfo 6 items which are needed by the zero page relocation kernel. Also duplicated some existing entries to avoid conflicts with ROL's allocations.
  hdr/OSRSI6, Makefile - New header listing OS_ReadSysInfo 6 items
  hdr/PublicWS - Duplicated the workspace definitions for &0-&4000, but with a 'Legacy_' prefix to their names. Also added some new entries as needed by the zero page relocation kernel. Once existing modules have been updated to use OS_ReadSysInfo 6 & the Legacy_ definitions, the old defs will be removed.
  hdr/KernelWS - Removed 'Export_' prefix from all the exported workspace values, since the kernel can now use the original names directly
  hdr/Options - Dummy HiProcVecs option so merging things will be a bit cleaner
Admin:
  Tested on rev A2 BB-xM


Version 5.35, 4.79.2.98.2.44. Tagged as 'Kernel-5_35-4_79_2_98_2_44'

Detail:
  s/Middle - Added some new OS_ReadSysInfo 6 items which are needed by the zero page relocation kernel. Also duplicated some existing entries to avoid conflicts with ROL's allocations.
  hdr/OSRSI6, Makefile - New header listing OS_ReadSysInfo 6 items
  hdr/PublicWS - Duplicated the workspace definitions for &0-&4000, but with a 'Legacy_' prefix to their names. Also added some new entries as needed by the zero page relocation kernel. Once existing modules have been updated to use OS_ReadSysInfo & the Legacy_ definitions, the old defs will be removed.
  hdr/KernelWS - Removed 'Export_' prefix from all the exported workspace values, since the kernel can now use the original names directly
  hdr/Options - Dummy HiProcVecs option so merging things will be a bit cleaner
Admin:
  Tested in ROM softload on Iyonix


Version 5.35, 4.79.2.118. Tagged as 'Kernel-5_35-4_79_2_118'

Detail:
  Three main changes:
  * On odd-numbered (i.e. development) versions of the module, the UtilityModule will now take its date from the VersionNum file instead of using a hard-coded date
  * All build versions now look for the new "extended ROM footer" (as created by romlinker 0.04+) at the end of the ROM image and use it to determine the ROM build date for return by OS_ReadSysInfo 9,2. Failing to find the build date in the footer will cause OS_ReadSysInfo 9,2 to return 0.
  * On odd-numbered versions, OS_Byte 0 will now use the ROM build date (as found in the extended footer) to generate the error block that's returned to the user. This seems OK as the PRM describes OS_Byte 0 as returning the "creation date of the operating system". Plus it's a convenient way of getting the ROM build date into the Switcher, since the switcher uses OS_Byte 0. If the extended footer can't be found (or if the string isn't initialised yet, e.g. before Service_PostInit) the code falls back to a hard-coded string containing the date from the VersionNum file.
  File changes:
  Makefile - Updated to not create the obsolete Time+Date file (previously used for the ROM build date)
  Version - Use date from VersionNum file for development builds
  hdr/Options - New UseNewFX0Error variable/option to make it easy to check which OS_Byte 0 variant should be enabled
  hdr/KernelWS - Added new string buffers & extended ROM footer pointer to workspace
  s/Middle - Updated OS_ReadSysInfo 9 code, and added utility functions for searching the extended ROM footer for certain tags
  s/NewReset - Added a couple of calls to initialise the new string buffers just prior to Service_PostInit. This is required since OS_Byte/OS_ReadSysInfo shouldn't enable interrupts, but date conversion relies on the Territory module, which may enable interrupts.
  s/PMF/osbyte - Updated OS_Byte 0 code
Admin:
  Tested in Tungsten ROM, with and without the extended footer present.


Version 5.35, 4.79.2.115. Tagged as 'Kernel-5_35-4_79_2_115'

Detail:
  Three main changes:
  * On odd-numbered (i.e. development) versions of the module, the UtilityModule will now take its date from the VersionNum file instead of using a hard-coded date.
  * All build versions now look for the new "extended ROM footer" (as created by romlinker 0.04+) at the end of the ROM image and use it to determine the ROM build date for return by OS_ReadSysInfo 9,2. Failing to find the build date in the footer will cause OS_ReadSysInfo 9,2 to return 0.
  * On odd-numbered versions, OS_Byte 0 will now use the ROM build date (as found in the extended footer) to generate the error block that's returned to the user. This seems OK as the PRM describes OS_Byte 0 as returning the "creation date of the operation system". Plus it's a convenient way of getting the ROM build date into the Switcher, since the switcher uses OS_Byte 0. If the extended footer can't be found (or if the string hasn't been initialised yet, e.g. before Service_PostInit) the code falls back to a hard-coded string containing the date from the VersionNum file.
  File changes:
  Makefile - Updated to not create the obsolete Time+Date file (previously used for the ROM build date)
  Version - Use date from VersionNum file for development builds
  hdr/Options - New UseNewFX0Error variable/option to make it easy to check which OS_Byte 0 variant should be enabled
  hdr/KernelWS - Added new string buffers & extended ROM footer pointer to workspace
  s/Middle - Updated OS_ReadSysInfo 9 code, and added utility functions for searching the extended ROM footer for certain tags
  s/NewReset - Added a couple of calls to initialise the new string buffers just prior to Service_PostInit. This is required since OS_Byte/OS_ReadSysInfo shouldn't enable interrupts, but date conversion relies on the Territory module, which may enable interrupts.
  s/PMF/osbyte - Updated OS_Byte 0 code
Admin:
  Tested in OMAP ROM, with and without the extended footer present.


Version 5.35, 4.79.2.98.2.41. Tagged as 'Kernel-5_35-4_79_2_98_2_41'

Detail:
  hdr/Options - ARM6support and GetKernelMEMC values are now derived from the value of MEMM_Type
  s/ARMops, s/HAL - Code to detect and handle ARMv7 CPUs is now only enabled when using VMSAv6 MMU model. Saves us from having to deal with lack of myIMB, myDSB, etc. implementations on pre-ARMv6.
  s/HAL - Removed some debug code
  s/NewReset - Fix bug spotted by Tom Walker where R12 wasn't being restored by LookForHALRTC if a non-HAL RTC had already been found
  s/AMBControl/memmap - correct the assert clause that was checking that &FFE are the correct L2PT protection bits for non-VMSAv6 machines
Admin:
  Tested this kernel on a rev C2 beagleboard & Iyonix softload. Also compiled it into an IOMD ROM, but didn't try running it.


Version 5.35, 4.79.2.98.2.32. Tagged as 'Kernel-5_35-4_79_2_98_2_32'

Detail:
  The host-mode driver for the MUSB OTG controller is now working, so there's no longer any reason to have the DebugTerminal enabled by default.
Admin:
  Tested on rev C2 beagleboard


Version 5.35, 4.79.2.98.2.12. Tagged as 'Kernel-5_35-4_79_2_98_2_12'

Detail:
  s/ARM600 - fix to SyncCodeAreasRange to correctly read cache line length for WB_CR7_Lx caches
  s/ARMops - Cortex cache handling fixes. Enable L2 cache for Cortex.
  s/ChangeDyn - VMSAv6 support in AllocateBackingLevel2
  s/HAL - Improve RISCOS_InitARM to set/clear correct CP15 flags for ARMv6/v7. VMSAv6 support in code to generate initial page tables.
  s/NewReset - Extra DebugTX calls during OS startup. Disable pre-HAL Processor_Type for HAL builds.
  s/VMSAv6 - Main VMSAv6 MMU code - stripped down version of s/ARM600 with support for basic VMSAv6 features.
  hdr/Options - Use VMSAv6 MMU code, not ARM600. Disable ARM6support since current VMSAv6 code will conflict with it.
Admin:
  Tested basic OS functionality under qemu-omap3 and revision B6 beagleboard.


Version 5.35, 4.79.2.98.2.3. Tagged as 'Kernel-5_35-4_79_2_98_2_3'

Detail:
  hdr/ARMops - Added Cortex_A8 processor type, new ARM architecture number
  hdr/Options - Enabled various kernel debug options
  s/ARMops - Added Cortex-A8/OMAP3530 to known CPUs list. Ignore cache type register for ARM architecture &F.
  s/NewIRQs - Increase MaxInterrupts to 96
Admin:
  Brief testing under qemu-omap3.



Version 5.35, 4.79.2.98.2.1. Tagged as 'Kernel-5_35-4_79_2_98_2_1'

* Added use of CDVPoduleIRQs (from Hdr:Machine)
* Fixed checksum corruption in OS_NVMemory block writes ending just below
  the checksum byte.
* Fixed R4 corruption by OS_Byte 162 with certain HALs.

Version 5.35, 4.79.2.71. Tagged as 'Kernel-5_35-4_79_2_71'

OSDelink/RelinkApp now work on the list in opposite orders so that the order of vector claims doesn't get toggled.

Fix for *FX5 not working due to a TST having been swapped for CMP.
Checkprotectionlink option added to HAL version so CMOS lock is
implemented.
Updated HAL docs.

Version 5.35, 4.79.2.58. Tagged as 'Kernel-5_35-4_79_2_58'

Detail:
  * Merged in the change to RISC OS 4.02 kernel that moved the GSTrans
    workspace out of scratch space.
  * Fixed a few bugs in callback postponement, and interrupt holes in
    callback dispatch. See Docs.CallbackChange for full info.
  * Fixed SystemSizeCMOS to SysHeapCMOS - wouldn't build as was.
  * Added an export of a C version of Hdr:HALDevice, based on the Hdr2H
    translation but with an additional struct definition. Required by
    SoundControl 1.00.
  * Added some additional location and ID allocations to Hdr:HALDevice.
    Required by today's HAL and SoundControl.
Admin:
  Partially tested.

Version 5.35, 4.79.2.56. Tagged as 'Kernel-5_35-4_79_2_56'

*Configure ANYTHINGsize was broken due to not setting R0 to ReadUnsigned
IIC ack message uninternationalised
OS_Memory was saying we only had 4M of RAM
VDU4 scrolling when output was switched to sprite was causing corruption
on use of CTRL-J and CTRL-K
Default SystemSize CMOS set to 32k

Version 5.35, 4.79.2.55. Tagged as 'Kernel-5_35-4_79_2_55'

Detail:
  Lots of changes since last version, at least the following:
  * Updated OS timestamp, removed alpha status
  * Negative INKEY OS version changed to &AA
  * GraphicsV is now alocated vector number &2A
  * ROM moved up to &FC000000
  * Max application slot increased to 512 Mbytes (for now)
  * Max size of RMA increased to 256 Mbytes
  * RMA is now first-created dynamic area (so it gets lowest address after
    top of application slot)
  * OS_Memory 10 reimplemeted
  * New OS_ReadSysInfo 6 values 18-22 added
  * OS_ReadSysInfo 8 gains flag bit to indicate soft power-off
  * Misc internal top-bit-set-address fixes
  * *ChangeDynamicArea can take sizes in megabytes or gigabytes
  * Magic word "&off" in R0 passed to OS_Reset powers down if possible
  * Added acceleration: block copy; CLS; text window scroll up; rectangle
    fill
  * Disabled LED flashing in page mode (liable to crash)
  * Masked sprite plot and VDU 5 text avoids reading the screen if possible
  * Framestore made USR mode accessible
  * Fix for VDU 5,127 bug - now relies on font definitions being in extreme
    quarters of memory, rather than bottom half
  * Allocated 64-bit OS_Convert... SWIs
  * IIC errors use allocated error numbers
  * Looks for Dallas RTC before Philips RTC because we're using a Philips
    NVRAM device with the same ID
  * Fix to bug that meant the oscillator in the Dallas RTC wasn't enabled
  * Default mouse type (USB) changed to allocated number
  * Ram disc max size increased to 128 Mbytes (Ursula merge) and made
    cacheable for StrongARMs (not XScale)
  * Branch through zero handler now works in USR mode, by use of a
    trampoline in the system stack to allow PC-relative register storage
  * Address exception handler changed to not use 0 as workspace
  * OS_Memory 13 extended to allow specification of cacheability and access
    privileges
  * Added OS_Memory 16 to return important memory addresses
  * RISCOS_MapInIO() takes cacheable flag in bit 3, access permissions in
    bits 10 and 11, doubly-mapped flag in bit 20, and access permissions
    specified flag in bit 21
  * Bug fix in last version for application abort handlers didn't quite
    work; register shuffle required
  * "Module is not 32-bit compatible" error now reports the module name
  * Default configured language changed from 10 to 11 (now Desktop again)

Version 5.35, 4.79.2.51. Tagged as 'Kernel-5_35-4_79_2_51'

Version 5.35, 4.79.2.48. Tagged as 'Kernel-5_35-4_79_2_48'

Ursula. Quite a hairy code merge really, so let's hope it is
worth it to someone. What you get (back after 2 or 3 years):
- much more efficient for largish numbers of DAs (relevance
  to current build = approx 0)
- fancy reason codes to support fast update of
  Switcher bar display (relevance = 0)
- support for clamped maximum area sizes, to avoid address
  space exhaustion with big memory (relevance = 0)
- better implementation of shrinkable DAs, performance
  wise (if lots of DAs, relevance = approx 0)
- support for 'Sparse' DAs. Holey dynamic areas, Batman!
  (relevance, go on someone use the darned things)
Moderately development tested on HAL/32bit ARM9 desktop.
Note the Switcher should be compiled to use the new
reason codes 6&7, for fabled desktop builds.

Also, during this work, so I could see the wood for the
trees, redid some source code clean up, removing pre-Medusa
stuff (like I did about 3 years ago on Ursula, sigh). That's
why loads of source files have changed. The new DA stuff
is confined pretty much to hdr.KernelWS and s.ChangeDyn.

Ta.

Version 5.35, 4.79.2.38. Tagged as 'Kernel-5_35-4_79_2_38'