GitLab

Detail:
  * Rejigged documented meaning of device "Location" field so that we can
    fit full PCI locations in.
  * Defined lots of device "Type" values in Hdr:HALDevice.
  * Removed obsolete DMA-related HAL entries in Hdr:HALEntries (no longer
    required by DMAManager 0_15-4_4_2_6, no longer provided by Tungsten HAL
    0.07).
  * OS_Hardware 2 and 3 actually work now.
  * Changed OS_Hardware 4 to take a maximum major version number to match.
  * HAL workspace is now USR mode readable.
  * Service calls issued after module initialisation/finalisation (see
    Docs.ModPostServ).
Admin:
  OS_Hardware tested, service calls not tested.

Version 5.35, 4.79.2.52. Tagged as 'Kernel-5_35-4_79_2_52'

Detail:
  Lots of changes since last version, at least the following:
  * Updated OS timestamp, removed alpha status
  * Negative INKEY OS version changed to &AA
  * GraphicsV is now alocated vector number &2A
  * ROM moved up to &FC000000
  * Max application slot increased to 512 Mbytes (for now)
  * Max size of RMA increased to 256 Mbytes
  * RMA is now first-created dynamic area (so it gets lowest address after
    top of application slot)
  * OS_Memory 10 reimplemeted
  * New OS_ReadSysInfo 6 values 18-22 added
  * OS_ReadSysInfo 8 gains flag bit to indicate soft power-off
  * Misc internal top-bit-set-address fixes
  * *ChangeDynamicArea can take sizes in megabytes or gigabytes
  * Magic word "&off" in R0 passed to OS_Reset powers down if possible
  * Added acceleration: block copy; CLS; text window scroll up; rectangle
    fill
  * Disabled LED flashing in page mode (liable to crash)
  * Masked sprite plot and VDU 5 text avoids reading the screen if possible
  * Framestore made USR mode accessible
  * Fix for VDU 5,127 bug - now relies on font definitions being in extreme
    quarters of memory, rather than bottom half
  * Allocated 64-bit OS_Convert... SWIs
  * IIC errors use allocated error numbers
  * Looks for Dallas RTC before Philips RTC because we're using a Philips
    NVRAM device with the same ID
  * Fix to bug that meant the oscillator in the Dallas RTC wasn't enabled
  * Default mouse type (USB) changed to allocated number
  * Ram disc max size increased to 128 Mbytes (Ursula merge) and made
    cacheable for StrongARMs (not XScale)
  * Branch through zero handler now works in USR mode, by use of a
    trampoline in the system stack to allow PC-relative register storage
  * Address exception handler changed to not use 0 as workspace
  * OS_Memory 13 extended to allow specification of cacheability and access
    privileges
  * Added OS_Memory 16 to return important memory addresses
  * RISCOS_MapInIO() takes cacheable flag in bit 3, access permissions in
    bits 10 and 11, doubly-mapped flag in bit 20, and access permissions
    specified flag in bit 21
  * Bug fix in last version for application abort handlers didn't quite
    work; register shuffle required
  * "Module is not 32-bit compatible" error now reports the module name
  * Default configured language changed from 10 to 11 (now Desktop again)

Version 5.35, 4.79.2.51. Tagged as 'Kernel-5_35-4_79_2_51'

In the No26bitCode case (ie when abort handlers are entered in ABT32 mode), if lazy task swapping was enabled and a data abort occurred that was not a page translation fault, then the code in AMB_LazyFixUp to map in the whole application slot was being circumvented, leading to problems for abort handlers in application space because r14_abt was corrupted by any abort due to accessing the abort handler itself. The test of the FSR (to compensate for the FAR being unusable for external aborts) which prompted the circumvention has therefore been moved inside AMB_LazyFixup.

Also now preserves the FSR and FAR across AMB_LazyFixUp, so they are now
visible from application abort handlers if desired.

Version 5.35, 4.79.2.50. Tagged as 'Kernel-5_35-4_79_2_50'

Detail:
  * Implemented OS_Hardware 2, 3 and 4 as described in Docs.HAL.NewAPI.
  * Added new OS->HAL and HAL->OS routines to register HAL devices with the
    OS during hard resets.
  * Updated Docs.HAL.NewAPI to correct inconsistencies, fill in missing
    definitions, and allow for interrupt sharing.
  * Now uses OS_LeaveOS to trigger callbacks after ROM module init.
Admin:
  Untested. Requires new HAL.

Version 5.35, 4.79.2.49. Tagged as 'Kernel-5_35-4_79_2_49'

Version 5.35, 4.79.2.48. Tagged as 'Kernel-5_35-4_79_2_48'

IOMD HAL:
  enables fast clock for StrongARM on Medusa h/w

Kernel:
  ARMops for StrongARM implemented. Tested moderately on
  HAL/32-bit minimal desktop build for Risc PC. Could do
  with more testing later. eg. does reentrant cache
  cleaning support really work?
  Lazy task swapping is enabled for revT or later, wahey.

Version 5.35, 4.79.2.42. Tagged as 'Kernel-5_35-4_79_2_42'

1) Bring IOMD HAL more up to date. Add support for new call HAL_CleanerSpace (preparation for StrongARM kernel support).

2) In kernel, add HAL_CleanerSpace call (preparation for
StrongARM and XScale core support). Fix bug found with
ARMv3 support during test on Risc PC.

3) Implement new API for kernel SWIs that have used top
bits of addresses as flags. The new API has an extra
flag that must be set, so kernel can distinguish and
support both APIs. The reason for all this is that
addresses are 32-bits now, people, keep up there. Briefly:

  OS_HeapSort
    bit 31 of r0 set for new API, r1 is full 32-bit address
    flags move from r1 bits 31-29 to r0 bits 30-28

  OS_ReadLine
    bit 31 of r1 set for new API, r0 is full 32-bit address
    flags move from bits 31,30 of r0 to bits 30,29 of r1

  OS_SubstituteArgs
    bit 31 of r2 set for new API, r0 is full 32-bit address
    flag moves from bit 31 of r0 to bit 30 of r2

Tested on Risc PC and briefly on Customer A 2

Ta

Version 5.35, 4.79.2.41. Tagged as 'Kernel-5_35-4_79_2_41'

Ursula. Quite a hairy code merge really, so let's hope it is
worth it to someone. What you get (back after 2 or 3 years):
- much more efficient for largish numbers of DAs (relevance
  to current build = approx 0)
- fancy reason codes to support fast update of
  Switcher bar display (relevance = 0)
- support for clamped maximum area sizes, to avoid address
  space exhaustion with big memory (relevance = 0)
- better implementation of shrinkable DAs, performance
  wise (if lots of DAs, relevance = approx 0)
- support for 'Sparse' DAs. Holey dynamic areas, Batman!
  (relevance, go on someone use the darned things)
Moderately development tested on HAL/32bit ARM9 desktop.
Note the Switcher should be compiled to use the new
reason codes 6&7, for fabled desktop builds.

Also, during this work, so I could see the wood for the
trees, redid some source code clean up, removing pre-Medusa
stuff (like I did about 3 years ago on Ursula, sigh). That's
why loads...

Look for LongCommandLine flag, command line size currently
set at 1k.
For HAL/32bit builds, the kernel buffer space is at high
(top bit set) address, which may break some code using signed
comparisons. So *beware* that there may be some latent
bugs in old kernel code using these buffers, not yet found.
One such bug, in s.Arthur2 found and fixed.
Tested moderately on ARM9 desktop build.
Lovely to reimplement things I did two and half years ago.

Version 5.35, 4.79.2.37. Tagged as 'Kernel-5_35-4_79_2_37'

Moved IOAllocPtr and IOAllocLimit to SkippedTables - the ARM9 got away with it because of the writeback cache, but poor souls like Simon condemned to an eternity of the ARM7 were a bit stuffed.

Version 5.35, 4.79.2.34. Tagged as 'Kernel-5_35-4_79_2_34'

* Allows HAL-driven software resets.
* Sound buffers corrected to be uncacheable.

Version 5.35, 4.79.2.33. Tagged as 'Kernel-5_35-4_79_2_33'

Reimplement Lazy task swapping, an amusing idea from Ursula, would have done it sooner but couldn't be bothered (humour).

Currently activates for all ARMs flagged as base-restored
abort model. No handling of eg. StrongARM pre-revT bug, but
then the kernel no longer runs on StrongARM (progress).
Still some details to fix: all aborts in current app space
assumed to be missing pages, but this must be fixed to
handle abort code in app space, things like debuggers
marking code read only.

Plus, small fixes:
  OS_Memory 8 returns vaguely useful info for RAM,VRAM
  in HAL build (temporary partial implementation)
  Broken handling of old BBC commands with (fx,tv etc)
  with no spaces fixed (fudgeulike code from Ursula,
  now 32-bit).

Version 5.35, 4.79.2.31. Tagged as 'Kernel-5_35-4_79_2_31'

* Kernel puts sensible default FIQ handler in through the HAL.
* Fix to temporary page uncaching code.

Version 5.35, 4.79.2.30. Tagged as 'Kernel-5_35-4_79_2_30'

spectacular new OS_Memory reason codes 13 map permanent I/O space, return logical address 14 access temporary physical mapping 15 release temporary physical mapping

DA creation and I/O space creation now avoid collision if address
space fills

Version 5.35, 4.79.2.28. Tagged as 'Kernel-5_35-4_79_2_28'

Version 5.35, 4.79.2.20. Tagged as 'Kernel-5_35-4_79_2_20'

An attempt to do NVMemory by using part of the Flash that the OS is sitting
in for Customer L. Programming algorithm works, but I'm not confident that the
Kernel does the right thing yet.

Version 5.35, 4.79.2.19. Tagged as 'Kernel-5_35-4_79_2_19'

Version 5.35, 4.79.2.18. Tagged as 'Kernel-5_35-4_79_2_18'

Detail:
  HAL entries have been entered for the Customer L UART (very much like the ARM
PrimeCell, rather than the 16550).
Admin:
  It builds.

Version 5.35, 4.79.2.16. Tagged as 'Kernel-5_35-4_79_2_16'

First attempt at ARM9 support, and general clean-up of old ARM-specific code, now using vectored ARMops.

Not tested.

Version 5.35, 4.79.2.14. Tagged as 'Kernel-5_35-4_79_2_14'

Check-in of the few last-minute changes for the Customer L demo. Nothing exciting, apart from an extended touchscreen API.

Version 5.35, 4.79.2.13. Tagged as 'Kernel-5_35-4_79_2_13'

Version 5.35, 4.79.2.12. Tagged as 'Kernel-5_35-4_79_2_12'

more use of ARMops in page manipulation, change register usage of ARmops tested by kernel boot to star prompt only

Version 5.35, 4.79.2.11. Tagged as 'Kernel-5_35-4_79_2_11'

More stuff. Up to the desktop now; cache on, working keyboard. Some source restructuring to start to make splitting it up into several object files more feasible.

Version 5.35, 4.79.2.9. Tagged as 'Kernel-5_35-4_79_2_9'

Detail:
  Added the HAL NVRAM entries.
  Modified i2cutils to use the HAL entries for NVRAM and behave sensibly if the HAL reports that there is no NVRAM, in which case there must be a forced reset_cmos call so that the cache gets set up sensibly.
Admin:
  Tested under the RPC emulator and appears to be working correctly, although some calls to IIC are still being made in the no nvram case.

Version 5.35, 4.79.2.8. Tagged as 'Kernel-5_35-4_79_2_8'

mjs macros switch on HAL for calling video code in HAL/pseudo HAL cases vduhint code even more almost ready to move to HAL

Version 5.35, 4.79.2.6. Tagged as 'Kernel-5_35-4_79_2_6'

Version 5.35, 4.79.2.5. Tagged as 'Kernel-5_35-4_79_2_5'

further kernel/HAL split work in video area almost-HAL code for VIDC20/IOMD in vdu.vduhint, now almost divorced from kernel workspace tested briefly in Ursula desktop environment

Version 5.35, 4.79.2.4. Tagged as 'Kernel-5_35-4_79_2_4'

partial video changes for kernel/HAL split near-HAL code for VIDC/IOMD in vdu.vduhint briefly tested in Ursula desktop build still some kernel workspace dependency in near-HAL code

Version 5.35, 4.79.2.3. Tagged as 'Kernel-5_35-4_79_2_3'

Version 5.35, 4.79.2.2. Tagged as 'Kernel-5_35-4_79_2_2'

* Added ARM_IMB and ARM_IMBRange SWIs as recommended by ARMv5.
* Some early prototype HAL bits popped in - a lot of source restructuring still
  to come.
* New debug target creates an AIF image with debug information, and translates
  this into an ASCII object file for the 16702B logic analyser.

Version 5.35, 4.79.2.1. Tagged as 'Kernel-5_35-4_79_2_1'

  Added common error cache.
Detail:
  Fixed module header validation code which was broken in 5.22.  This
    shouldn't have caused much of a problem as it was only a bizarre
    check (SWI chunk looked valid but SWI handler was 0) that would
    have failed - but be reported as a valid set of SWI entries.
  Added common error message cache.  Several common errors (Buffer
    overflow; Number not recognised; Bad vector release; and a couple
    of others) are now cached the first time they are translated into
    a block of memory in the system heap.
Admin:
  Tested in Ursula build - cacheing only active in Ursula build - change
    HdrSrc if you want it in your products too.
  Requires HdrSrc 0.94

Version 5.31. Tagged as 'Kernel-5_31'

Added compile-time support for full-resolution teletext characters in teletext emulation mode (MODE 7) for that authentic BBC Micro feel.

  Also introduced a few useful teletext control features via VDU 23,18.
  Unrelatedly, fixed *ScreenLoad to work for interlaced displays.

Detail:
  The new typeface is designed on a 16x20 grid (previously we had used 8x10),
  so it uses a screen resolution of 640x500 pixels (rather than 320x250).
  Since we have been unable to source a genuine teletext font, and since
  examination of a BBC Micro suggests that the genuine font may not have been
  a power-of-2 pixels wide, I have designed one specially, based upon the one
  supplied in Zap distributions (a 12x20 font). Rather than increase the
  amount of workspace that the kernel requires for cacheing graphic
  characters, it now generates them on the fly, as they are required; this
  should only add about 25% to their rendering time.

  The new VDU 23 sequences are as follows:

  VDU 23,18,0,mode,0,0,0,0,0,0
    Switch transparency mode
      mode = 0: "Text" mode: the whole display is set opaque
      mode = 1: "Mix" mode: foreground colours, and both foreground and
        background of boxed text are opaque; non-boxed background colours are
        all transparent
      mode = 2: "Box" mode: boxed regions are opaque, others are transparent
      mode = 3: "TV" mode: the whole display is set transparent
    Default is mode = 0.

  VDU 23,18,1,suspend,0,0,0,0,0,0
    Suspend or resume bitmap updates
    This call allows an application to request that the kernel suspends
    updates to the framebuffer bitmap. This allows for a significant speed
    increase in the rendering time for a large amount of text, for example
    when redrawing a complete teletext page, because each time you plot a
    single character, it can cause the whole of the rest of the line to be
    re-rendered. When you switch out of suspend mode, the whole screen is
    refreshed in a single pass. Note that the appearance of the display is
    undefined is you cause a hardware scroll while in suspend mode.
      suspend = 0: screen update is enabled
      suspend = 1: screen update is suspended
    Default is suspend = 0.

  VDU 23,18,2,reveal,0,0,0,0,0,0
    Reveal/conceal
      reveal = 0: characters between the Conceal control code and the next
        colour control code are replaced by spaces
      reveal = 1: all characters are displayed
    Default is reveal = 0.

  VDU 23,18,3,black_emable,0,0,0,0,0,0
    Enable/disable black foreground colour control codes
      black_enable = 0: control codes &80 and &90 do nothing
      black_enable = 1: control code &80 selects black text, control code
        &90 selects black graphics
    Default is black_enable = 0.

  I have performed some timing tests on the rendering of complete teletext
  pages grabbed from the teletext server. These show that the new code
  generally imposes a 2x speed hit. However, when using the VDU 23,18,1
  suspend function, this improves to a 20% speed increase when compared to
  the old low-resolution code. Better still, because the framebuffer is only
  being updated for the final stage of this process, the screen *appears* to
  be updated some 3x faster than with the old code!

  A comment on the VDU variable Log2BPC is in order: in previous kernels,
  this was able unambiguously to refer to both the framebuffer width of a
  character in bytes, and the framebuffer width of an "addressable pixel" in
  bits; this no longer works with the 16-pixel wide teletext font. Bearing
  in mind that future kernels may support Unicode system fonts where the
  width varies from character to character, I have chosen to fix Log2BPC to
  the "addressable pixel" definition.

Admin:
  Requires HdrSrc 0.89 and (for non-desktop builds) Interlace 0.61. A monitor
  definition file containing a definition for a 640x500 screen mode is also
  required; version 0.40 of ModeFiles contains a suitable mode for STB-400.

  Tested fairly rigourously on an Ursula build, a Lazarus build and an
  STB-400 build, using genuine teletext pages and Yellow River Kingdom.

Version 5.30. Tagged as 'Kernel-5_30'

Had one of those weekend brainstorms - managed to speed up SWI despatcher _and_ add Thumb support to it.

Fixed OS_BreakPt - was confused by PC/PSR split.

Version 5.24. Not tagged

Details:
  The Kernel will now compile to produce a pure 32-bit system if No26bitCode is
  set to TRUE.
  If No26bitCode is FALSE, then the Kernel will be a standard 26-bit Kernel,
  although some internal changes have taken place to minimise compile
  switches between the two cases. See Docs.32bit for more technical info.

  The hardest part was the flood-fill...

Other changes:
  Pointer shape changes now take place on the next VSync, rather than actually
  WAITING for the VSync. Turning the Hourglass on shouldn't slow your machine
  down by 5% now :)

  Lots of really crusty pre-IOMD code removed.

Admin:
  Tested in 32 and 26-bit forms in a limited desktop build. Basically, this
  will need to see a lot of use to iron out difficulties. I'd like anyone who
  has a non-frozen project to at least attempt using this Kernel.

Version 5.23. Tagged as 'Kernel-5_23'