1. 20 Mar, 2021 2 commits
    • Jeffrey Lee's avatar
      Ensure IIC bus list is fully initialised · 82a9c908
      Jeffrey Lee authored
      IICInit only initialises the entries for valid IIC buses (i.e up to the
      limit returned by HAL_IICBuses), but some code accesses the array
      without checking against the HAL_IICBuses limit. This causes problems
      because the array lives in the SkippedTables area of workspace, meaning
      it isn't zero-initialised automatically.
      Ensure that the entries for the invalid bus numbers are
      zero-initialised, so that code which doesn't check against HAL_IICBuses
      won't mistake the invalid entries for valid IRQ-driven buses
      (InitialiseIRQ1Vtable, Reset_IRQ_Handler, etc.)
      Also, protect against overwriting the end of the array if HAL_IICBuses
      is more than the OS supports.
      Fixes hang on startup on Pi 4 if memory is filled with -1 (and OS is
      told that RAM isn't clear), and on Pi400 with normal memory:
      Version 6.55. Tagged as 'Kernel-6_55'
    • Jeffrey Lee's avatar
      Fix MaxInterrupts for Pi 4 · 7f1f637a
      Jeffrey Lee authored
      Value needs to be increased from 256 to 320, so that the IRQ table is
      large enough to allow the core 2 & 3 private interrupts to be managed.
  2. 17 Mar, 2021 5 commits
    • Jeffrey Lee's avatar
      Initial large phys addr support for RISCOS_AddRAM · 21a340f4
      Jeffrey Lee authored
      Define that bit 12 of the RISCOS_AddRAM flags indicates that the
      supplied start, end, and sigbits values are in 4KB units instead of byte
      units. This allows a 44 bit address space to be used, higher than the 40
      bit LPAE limit.
      The page list that RISCOS_AddRAM constructs will now store everything in
      4KB page units, however any RAM above 4GB will currently be thrown away
      when the list is later transferred to the PhysRamTable which the OS uses
      at runtime.
      Version 6.54. Tagged as 'Kernel-6_54'
    • Jeffrey Lee's avatar
      Remove CAM size limit · 79bc3343
      Jeffrey Lee authored
      Previously the CAM sat inside a fixed 16MB window, restricting it to
      storing the details of 1 million pages, i.e. 4GB of RAM. Shuffle things
      around a bit to allow this restriction to be removed: the CAM is now
      located just above the IO region, and the CAM start address /
      IO top will calculated appropriately during kernel init. This change
      paves the way for us to support machines with over 4GB of RAM.
      FixedAreasTable has also been removed, since it's no longer really
      necessary (DAs can only be created between the top of application space
      and the bottom of the used IO space, and it's been a long time since
      we've had any fixed bits in the middle of there)
    • Jeffrey Lee's avatar
      Initial long descriptor support · b51b5540
      Jeffrey Lee authored
      This adds initial support for the "long descriptor" MMU page table
      format, which allows the CPU to (flexibly) use a 40-bit physical address
      There are still some features that need fixing (e.g. RISCOS_MapInIO
      flags), and the OS doesn't yet support RAM above the 32bit limit, but
      this set of changes is enough to allow for working ROMs to be produced.
      Also, move MMUControlSoftCopy initialisation out of ClearWkspRAM, since
      it's unrelated to whether the HAL has cleared the RAM or not.
    • Jeffrey Lee's avatar
      Adjust alignment of PageShifts · cf51151a
      Jeffrey Lee authored
      PageShifts is only accessed with "ADRL xx, PageShifts-1"; adjust the
      alignment so that PageShifts-1 is word aligned, to try and avoid us
      hitting any ADRL range limits (which has happened with the runtime
      ShortDesc vs. LongDesc selection from future commits)
    • Jeffrey Lee's avatar
      Ensure PhysIllegalMask is initialised correctly · a7240617
      Jeffrey Lee authored
      Remove the lazy initialisation of PhysIllegalMask and instead manually
      initialise it during MMU init. This fixes some situations where the lazy
      initialisation doesn't work (PhysIllegalMask isn't in a zero-initialised
      area of workspace, so if the HAL isn't doing a RAM clear then it could
      be garbage)
  3. 15 Feb, 2021 1 commit
    • Timothy E Baldwin's avatar
      Remove SysCommsModule pseudo-module · 9099b4b9
      Timothy E Baldwin authored
      Historically many commands of BBC Micro heritage were not included
      in UitilyModules, but were separated out into a separate pseudo-module,
      SysCommsModule, to allow for them to be terminated by any non-letter
      for compatibility with the BBC Micro.
      However with the introduction of `Oscli_HashedCommands` in August 1999
      (and earlier in Ursula branch) this was broken except for *FX, *KEY,
      *OPT and *TV, which are handled by a special case making SysCommsModule
      SysCommsModule is an obsitcle to making the kernel assemble to relocatable
      AOF as it requires Module_BaseAddr to have 2 different values and therefore
      be a absolute varaible instead of a section relative symbol.
      This commit does not change behaviour with `Oscli_HashedCommands` enabled
      which is the default, except for listing the command under UtilityModule
      in *Help output. Which `Oscli_HashedCommands` disable this change removes
      the special behaviour.
      Version 6.53. Tagged as 'Kernel-6_53'
  4. 13 Feb, 2021 8 commits
    • Jeffrey Lee's avatar
      [RISCOS_]AccessPhysicalAddress uses page flags · 7924aae2
      Jeffrey Lee authored
      Currently RISCOS_AccessPhysicalAddress allows the caller to specify the
      permissions/properties of the mapped memory by directly specifying some
      of the L1 page table entry flags. This will complicate things when
      adding support for more page table formats, so change it so that
      standard RISC OS page flags are used instead (like the alternate entry
      point, RISCOS_AccessPhysicalAddressUnchecked, already uses).
      Also, drop the "RISCOS_" prefix from RISCOS_AccessPhysicalAddress and
      RISCOS_ReleasePhysicalAddress, and remove the references to these
      routines from the HAL docs. These routines have never been exposed to
      the HAL, so renaming them and removing them from the docs should make
      their status clearer.
      Version 6.52. Tagged as 'Kernel-6_52'
    • Jeffrey Lee's avatar
      Remove unused BangCam routine · 5dbb8207
      Jeffrey Lee authored
      Somewhere along the way, BangCam became redundant. Get rid of it.
    • Jeffrey Lee's avatar
      Remove more direct page table access · 858949b6
      Jeffrey Lee authored
      RISCOS_LogToPhys and OS_Memory 20 (compatibility page) changed to use
      suitable subroutines for reading the page tables instead of accessing
      them directly.
    • Jeffrey Lee's avatar
      DecodeL1/L2Entry -> LoadAndDecodeL1/L2Entry · 846eee02
      Jeffrey Lee authored
      Change the DecodeL1/L2Entry routines so that instead of accepting a page
      table entry as input, they accept a (suitable-aligned) logical address
      and fetch the page table entry themselves. This helps insulate the
      calling code from the finer details of the page table format.
    • Jeffrey Lee's avatar
      More code uses logical_to_physical & physical_to_ppn · 9a82cb28
      Jeffrey Lee authored
      GetPageFlagsForR0IntoR6 & MoveCAMatR0toR3 changed to use
      logical_to_physical & physical_to_ppn, to reduce the number of routines
      which are performing direct page table access.
    • Jeffrey Lee's avatar
      OS_FindMemMapEntries now uses logical_to_physical · b60d3a70
      Jeffrey Lee authored
      Reduce the number of routines which directly examine the page tables, by
      changing OS_FindMemMapEntries to use logical_to_physical.
    • Jeffrey Lee's avatar
      Start moving page table code into s.ShortDesc · ca69793c
      Jeffrey Lee authored
      In preparation for the addition of long descriptor page table support,
      start moving low-level page table routines into their own file
      (s.ShortDesc) so that we can add a corresponding long descriptor
      implementation in the future.
      * logical_to_physical, MakePageTablesCacheable,
      MakePageTablesNonCacheable, AllocateBackingLevel2, AMB_movepagesin_L2PT,
      AMB_movecacheablepagesout_L2PT, AMB_moveuncacheablepagesout_L2PT
      routines, and PageNumToL2PT macros, all moved to s.ShortDesc with no
      * Add new UpdateL1PTForPageReplacement routine (by splitting some code
      out of s.ChangeDyn)
    • Jeffrey Lee's avatar
      Prepare logical_to_physical for 64bit phys addrs · 4fd2dd01
      Jeffrey Lee authored
      ppn_to_physical, logical_to_physical, physical_to_ppn & ppn_to_physical
      have now all been changed to accept/receive 64bit physical addresses in
      R8,R9 instead of a 32bit address in R5. However, where a phys addr is
      being provided as an input, they may currently only pay attention to the
      bottom 32 bits of the address.
  5. 10 Feb, 2021 2 commits
    • Timothy E Baldwin's avatar
      Fix OS_EvaluateExpression · fd66eeef
      Timothy E Baldwin authored
      OS_EvaluateExpression is documented as applying GSTrans to any strings
      within the expression, but did instead GSTrans the entire expression.
      This would result in a sequence such as:
          *Set Alias$@RunType_FD1 "Basic -quit ""%0"" %*1"
          *If "<Alias$@RunType_FD1>"="" Then Set Alias$@RunType_FD1 @RunType_FFB %*0
      raising a "Unknown operand" error as the quote in the variable
      were interpreted as expression syntax. See
      Unfortunately skipping the initial GSTrans breaks common code such as:
          If "<StrED_cfg$Dir>" = "" AND <Ctrl$Pressed> = 0 Then ...
          If "<Zap$OSVsn>" <> "" Then SetEval ZapFonts$OSVsn <Zap$OSVsn>
      Fix by applying a GSTrans transformation over unquoted parts of the
      expression, then applying GSTrans over the quoted strings.
      Version 6.51. Tagged as 'Kernel-6_51'
    • Timothy E Baldwin's avatar
      Fix GSTrans of quoted macro variable · 0eeb16a7
      Timothy E Baldwin authored
          *SetMacro Macro Test
          SYS "OS_GSTrans", """<Macro>""", &10000, &100
      Would result in an erroneous "String not recognised" error as the
      end of macro variable was reached before closing quote.
      Fix by reordering the checks.
  6. 30 Jan, 2021 3 commits
    • Jeffrey Lee's avatar
      Expose ABTSTK via OS_ReadSysInfo 6 · 02e5e4dc
      Jeffrey Lee authored
      It's the only privileged-mode stack which doesn't have its address
      exposed via OS_ReadSysInfo 6. Expose it so that software which wants to
      know its address can read it instead of relying on hardcoded values.
      Tested on Raspberry Pi 4
      Version 6.50. Tagged as 'Kernel-6_50'
    • Jeffrey Lee's avatar
      Remove some quirks from the memory map · d0c4b0c1
      Jeffrey Lee authored
      The correct amount of space is now reserved for Kbuffs, and there's no
      need to have a 1MB gap where the old PhysicalAccess window was.
      Tested on Raspberry Pi 4
    • Jeffrey Lee's avatar
      More declarative memory map · ee6d31a3
      Jeffrey Lee authored
      Although storage maps are useful for allowing the fixed areas of the
      memory map to be relocated, it isn't clear in the current definition
      what the size of each area is, and it's hard to ensure that all the
      areas are kept at the correct alignment.
      Replace the current basic workspace definition with one which makes use
      of the new ASpace macro, to allow addresses to be calculated
      automatically based on the size & alignment of each area. Also output
      the address of each area in the build log for easy
      Binary unchanged.
  7. 23 Jan, 2021 1 commit
    • Timothy E Baldwin's avatar
      Preserve LR and CPSR in DebugTX · 59d9f948
      Timothy E Baldwin authored
      This ensures that the debug macros may be freeley placed without
      concern for if LR and CPSR contain important values, and avoid the
      of code only working because the debug code changes the flags with
      the effect of a bug appearing when debugging is enabled.
      Version 6.49. Tagged as 'Kernel-6_49'
  8. 16 Jan, 2021 5 commits
    • Jeffrey Lee's avatar
      Make supervisor stack inaccessible to user mode · bbc7ad20
      Jeffrey Lee authored
      Previously the supervisor stack was read-only in user mode, but since
      the supervisor stack is typically empty when the CPU is in user mode,
      it's questionable whether any software actually makes use of this
      To simplify support for the long descriptor page table format (which
      doesn't support the user-RO + privileged-RW access mode), let's
      try and remove usermode SVC stack access completely.
      Tested on Raspberry Pi 4
      Version 6.48. Tagged as 'Kernel-6_48'
    • Timothy E Baldwin's avatar
      Allow ZeroPage at any 64K aligned address · 4341900a
      Timothy E Baldwin authored
      Change ZeroPage calculation so that ZeroPage can be at
      any 64K aligned address.
      Version 6.47. Not tagged
    • Timothy E Baldwin's avatar
      Fix ROM check for callbacks · 4a56c45f
      Timothy E Baldwin authored
      Check now works if ROMLimit is precisely at the end
      of ROM causing ROMLimit to not be a valid immediate.
    • Timothy E Baldwin's avatar
      Move ROM constant and add ASSERT · afd37607
      Timothy E Baldwin authored
      Move ROM constant to KernelWS with the reset of the memory layout.
      Add ASSERT to guard against workspace colliding with ROM.
    • Timothy E Baldwin's avatar
      Allow the kernel workspace to be easily relocated · ebc97877
      Timothy E Baldwin authored
      Rather than specifing absolute addresses for the workspace,
      use ObjASM's storage layout support.
  9. 19 Dec, 2020 1 commit
  10. 23 Nov, 2020 1 commit
    • Julie Stamp's avatar
      Increase RamFS limit to 2GB · a81fa868
      Julie Stamp authored
      RamFS now supports disc sizes up to 2GB-4KB, so raise the dynamic area limit from 508MB.
      Tested with a disc size up to 928MB
      Version 6.46. Tagged as 'Kernel-6_46'
  11. 28 Oct, 2020 1 commit
    • John Ballance's avatar
      Build fix to DebugTerminal · 070ae73d
      John Ballance authored
      Changes in Kernel-6_44 left an undefined symbol in s.HAL in DebugTerminal_Rdch. These mods resolve that, and also add a note in s.Kernel to reflect this usage.
      Version 6.45. Tagged as 'Kernel-6_45'
  12. 24 Oct, 2020 3 commits
    • Timothy E Baldwin's avatar
      Eliminate callback check to Portable_Idle races · 994cc0d9
      Timothy E Baldwin authored
      Previously both `RdchInkey` and `PageTest` enabled interrupts after
      running callbacks before calling Portable_Idle with the result that
      callback could be delayed until the next interrupt.
      * Change `process_callback_chain` to leave interrupts disabled, and
        rename accordingly.
      * Remove redundant check of CallBack_Flag.
      * In `PageTest` move running calbacks into `CtrlShiftTest`, so that
        it is immediately before the test.
      * Re-enable interrupts at appropriate locations.
      Tested on StrongARM Risc PC.
      Version 6.44. Tagged as 'Kernel-6_44'
    • Timothy E Baldwin's avatar
    • Timothy E Baldwin's avatar
      Remove remains of led setting from PageTest · e1c04167
      Timothy E Baldwin authored
      This was introduced on 2002-10-07 in Kernel-5_35-4_79_2_48
      the removed on 2002-11-30 in Kernel-5_35-4_79_2_51 as it
      was "liable to crash".
  13. 19 Oct, 2020 2 commits
  14. 19 Sep, 2020 1 commit
    • Jeffrey Lee's avatar
      OS_DynamicArea 22 fixes · 88219988
      Jeffrey Lee authored
      Multiple fixes, mostly related to error handling.
      1. Ensure R1 is initialised correctly when generating BadPageNumber
      errors (labels 94 & 95). Generally this involves setting it to zero to
      indicate that no call to LogOp_MapOut is required. Failing to do this
      would typically result in a crash.
      2. When branching back to the start of the loop after calling
      GetNonReservedPage, ensure R0 is reset to zero. Failing to do this would
      have a performance impact on LogOp_MapOut, but shouldn't be fatal.
      3. In the main routine, postpone writing back DANode_Size until after
      the call to physical_to_ppn (because we may decide to abort the op
      and return an error without moving a page).
      4. Fix stack offset when accessing PMPLogOp_GlobalTBLFlushNeeded.
      Getting this wrong could potentially result in some TLB maintenance
      being skipped when moving uncacheable pages.
      5. Fix stack imbalance at label 94
      Version 6.43. Tagged as 'Kernel-6_43'
  15. 15 Aug, 2020 1 commit
    • Timothy E Baldwin's avatar
      Fix cleaning · 5e131c13
      Timothy E Baldwin authored
      Move .gitignore file to root and populate with all temporary paths.
      This fixes .gitignore files being deleted during a ROM build.
      Version 6.42. Not tagged
  16. 25 Jul, 2020 1 commit
    • Timothy E Baldwin's avatar
      Disable interrupts whilst checking for keys in OS_ReadC / INKEY · 9d5ab8de
      Timothy E Baldwin authored
      This ensures that on exit from OS_ReadC / INKEY either
      a character is returned or the input buffer is empty,
      and that Portable_Idle is only called when the input
      buffer is empty.
      This avoids a 10 microsecond delay and relying on timer
      interrupts to make progress and allows reliably waiting
      for input and another event by:
      Disable Interrupts
        Call INKEY(0), exit loop if key pressed
        Check other event, exit loop if key pressed
        Call Portable_Idle
      Version 6.42. Tagged as 'Kernel-6_42'
  17. 11 Jul, 2020 1 commit
    • Jeffrey Lee's avatar
      Fix OS_Memory 7 for discontiguous RAM · fb127e47
      Jeffrey Lee authored
      The current OS_Memory 7 implementation uses an address range structure
      returned by HAL_PhysInfo to decide which part of the physical address
      arrangement table to overwrite with RAM information. I suspect the
      original intention was for OS_Memory to use this address range to avoid
      marking the VRAM as DRAM (HAL_PhysInfo is expected to fill in the VRAM
      itself). But by overwriting everything between the start and the end
      address, OS_Memory will also overwrite any non-RAM areas which are
      sandwiched between RAM banks, e.g. the VideoCore-owned RAM on Pi models
      with >1GB RAM. There's also the problem that the address range returned
      by the HAL is using 32bit addresses, so it won't work as-is for RAM
      located above the 4GB barrier.
      Fix these issues by reworking the routine so that it ignores the address
      range returned by the HAL and instead detects VRAM by checking the
      IsVRAM flag in the PhysRamTable entry. And for detecting if the ROM is
      running from RAM, instead of using the address range we can rely on the
      flag available via OS_ReadSysInfo 8 (i.e. HAL_PlatformInfo), like
      OS_Memory 8 does.
      Also add a simple BASIC program (Dev.PhysInfo) to allow easy checking of
      HAL & OS physical address arrangement tables.
      Version 6.41. Tagged as 'Kernel-6_41'
  18. 01 Jul, 2020 1 commit
    • Jeffrey Lee's avatar
      Add missing AMBControl appspace shrink check · 0634b535
      Jeffrey Lee authored
      Fix GrowFreePoolFromAppSpace (i.e. appspace shrink operation) to issue
      UpCall_MemoryMoving / Service_Memory when attempting to shrink PMP-based
      appspace (i.e. AMBControl nodes). This fixes (e.g.) BASIC getting stuck
      in an abort loop if you try and use OS_ChangeDynamicArea to grow the
      free pool.
      Version 6.40. Tagged as 'Kernel-6_40'