GitLab

Detail:
  This module is expecetd to be in the Video subdirectory of System:Modules

Version 5.88. Tagged as 'BuildSys-5_88'

Detail:
  * Added RemotePrinterSupport modules to BuildHost, so disc builds build
    cleanly
  * Added ScreenFX module to Disc build
  * Added components required by the above: USBDriver and PRISMLib
Admin:
  Tested in respective builds

Version 5.86. Tagged as 'BuildSys-5_86'

Version 5.85. Tagged as 'BuildSys-5_85'

Version 5.83. Tagged as 'BuildSys-5_83'

Detail:
  Components/ROOL/Disc - Added VCHIQ softload (+ written offer of sources) to disc image, inside 5.10 predesk. Added PCI module to header export for benefit of building VCHIQ.
Admin:
  Tested on Raspberry Pi


Version 5.82. Tagged as 'BuildSys-5_82'

As the PlingSystem components result in a 26 bit APCS-R module and also outputs Config2Installer into !System.360, this avoids a SysMerge overwriting the 32 bit copy with a 26 bit one and stopping the "System" configure plugin from running when booting the disc image as RISC OS 5, while allowing pre RISC OS 5 without the updated C library to run the installer needed to update the C library.
Clear?

Version 5.81. Not tagged

Sprites should be one directory deeper.

Version 5.79. Tagged as 'BuildSys-5_79'

Detail:
  Components/ROOL/Disc - ModuleDB knows the Wimp as 'WindowManager', not 'Wimp'
Admin:
  Fixes error preventing Disc builds from starting


Version 5.78. Tagged as 'BuildSys-5_78'

Mirrors variables used in CModule. Note ${EXPORT} has changed to $CUSTOMEXP}, but nothing seemed to be using the former anyway.
ThemeDefs added to module database.
Replace useof ResApp with ThemeDefs in the disc image.


Version 5.77. Tagged as 'BuildSys-5_77'

Version 5.76. Tagged as 'BuildSys-5_76'

Version 5.75. Tagged as 'BuildSys-5_75'

Change ModuleDB to point to Help in non closed section.
Retagged as BuildSys-5_74.

Forgot how useless 3.50 was without any applications.

Version 5.74. Tagged as 'BuildSys-5_74'

Should be one directory higher up

Version 5.71. Not tagged

Version 5.71. Not tagged

Adjust switch for Config2Installer

Version 5.71. Not tagged

Version 5.67. Tagged as 'BuildSys-5_67'

Retagged as BuildSys-5_56.

Add FrontEnd to Disc image (in the 500 directory to avoid overwriting the 26 bit only copy in 310 as found in the PlingSystem distribution).

Version 5.53. Tagged as 'BuildSys-5_53'

Detail:
  Components/ROOL/Disc - Added ZLib module to !System (plus build dependent zlib library)
  Moved FileCore header export further up due to other header exports (e.g. ADFS) now being dependent on FileCore's headers
Admin:
  ZLib module tested somewhat


Version 5.49. Tagged as 'BuildSys-5_49'

The HAL (or not HAL) is runtime detected, but as it has international help it can't go before 3.60.

Version 5.46. Tagged as 'BuildSys-5_46'

Version 5.38. Tagged as 'BuildSys-5_38'

Detail:
  Components/ROOL/Disc - Added a RISC OS 5 compatible version of CLib to the !System installation. This allows the disc image to safely be used on versions of RISC OS 5 older than current.
Admin:
  Disc image builds OK and CLib module works OK, but no testing of disc image itself was performed


Version 5.37. Tagged as 'BuildSys-5_37'

* Added components file to generate a !System
* Binaries/Browse/BuildEnv/Disc/IOMD32/OMAP4/Printers/Tungsten add heading blocks and line stuff up
* OMAP3 remove unused switch from FPEmulator
* SysMap add mapping from Sovereign to 'V'
* CTools extra qualifiers on some modules to get help right for modules in the 310 directory
* AAsmModule when CMDHELP=None is in force you can infer that no international help is desired, therefore pass this as a switch to the module to allow it to remove the tokens from its help table (based on how the 'standalone' switch is done)

Version 5.35. Tagged as 'BuildSys-5_35'

Detail:
  Components/ROOL/Disc - Added NetTime and the VIDC sound setup plugin.
Admin:
  Disc image builds OK
  Version 2.02 or above of the non-VIDC SndSetup plugin required otherwise the VIDC version will never be launched.
  NetTime could do with a configuration window in InetSetup


Version 5.32. Tagged as 'BuildSys-5_32'

Version 5.28. Tagged as 'BuildSys-5_28'

Detail:
  Components/ROOL/Disc - Added portable module & callx library to list of exports
Admin:
  Required for SCSISwitch 2.07


Version 5.25. Tagged as 'BuildSys-5_25'

Version 5.22. Tagged as 'BuildSys-5_22'

Version 5.07. Tagged as 'BuildSys-5_07'

Version 4.97. Tagged as 'BuildSys-4_97'

Removed CircleSetup screensaver config - it's meaningless.

Version 4.94. Tagged as 'BuildSys-4_94'

Detail:
  The screensaver setup apps (all called !SvrSetup) each have their source code inside the "Settings" folder for the relevant screen saver - but previously there was no way of building the code for the setup apps. This change fixes that, by adding dedicated ModuleDB entries for each setup app.
Admin:
  Tested on rev C2 beagleboard


Version 4.91. Tagged as 'BuildSys-4_91'

Version 4.90. Tagged as 'BuildSys-4_90'

Version 4.89. Tagged as 'BuildSys-4_89'

Version 4.88. Tagged as 'BuildSys-4_88'

Version 4.86. Tagged as 'BuildSys-4_86'

Version 4.85. Tagged as 'BuildSys-4_85'

Reconstructed Disc components file to allow a functional, semi-complete RISC OS 5 disc image/!Boot sequence to be built

Detail:
  Components file almost entirely reconstructed, based around Iyonix-ish Universal components file received from ROOL. Any missing/broken components are commented out with ### for clarity.
Admin:
  Built on Iyonix, tested on BeagleBoard


Version 4.83. Tagged as 'BuildSys-4_83'

This represents the version released in the Batch 4 "bbe" tarfiles.
Tagged as 'Batch4'