GitLab

Detail:
  This module is expecetd to be in the Video subdirectory of System:Modules

Version 5.88. Tagged as 'BuildSys-5_88'

Modify makefile fragments to generate GPA & symbol files when building ROM modules. Add HangWatch to ModuleDB.

Detail:
  Makefiles/AAsmModule, Makefiles/CModule - Modified to generate GPA (for assembler) and symbols (for C) files when building ROM modules. These files are copied into the install folder, allowing them to easily be picked up by debugging tools.
  ModuleDB - Added entry for HangWatch module
Admin:
  Makefile changes tested with BCM2835, OMAP3, and Disc builds


Version 5.87. Tagged as 'BuildSys-5_87'

Detail:
  * Added RemotePrinterSupport modules to BuildHost, so disc builds build
    cleanly
  * Added ScreenFX module to Disc build
  * Added components required by the above: USBDriver and PRISMLib
Admin:
  Tested in respective builds

Version 5.86. Tagged as 'BuildSys-5_86'

Version 5.85. Tagged as 'BuildSys-5_85'

Version 5.84. Tagged as 'BuildSys-5_84'

Not tagged.

Version 5.83. Tagged as 'BuildSys-5_83'

Detail:
  Components/ROOL/Disc - Added VCHIQ softload (+ written offer of sources) to disc image, inside 5.10 predesk. Added PCI module to header export for benefit of building VCHIQ.
Admin:
  Tested on Raspberry Pi


Version 5.82. Tagged as 'BuildSys-5_82'

As the PlingSystem components result in a 26 bit APCS-R module and also outputs Config2Installer into !System.360, this avoids a SysMerge overwriting the 32 bit copy with a 26 bit one and stopping the "System" configure plugin from running when booting the disc image as RISC OS 5, while allowing pre RISC OS 5 without the updated C library to run the installer needed to update the C library.
Clear?

Version 5.81. Not tagged

Detail:
  Components/ROOL/BCM2835 - Some unwanted changes crept into the last commit, preventing the ROM from building without a copy of my HangWatch module (and preventing it from running without switching the kernel to high processor vectors)
Admin:
  Tested with vanilla BCM2835 souce tree


Version 5.81. Tagged as 'BuildSys-5_81'

Detail:
  ModuleDB - Added BCMSound & VCHIQ definitions
  Components/ROOL/BCM2835 - Added BCMSound to ROM, and VCHIQ to header exports
Admin:
  Tested on Raspberry Pi with high processor vectors
  Note - BCMSound won't initialise on startup. First the VCHIQ module needs to be sofloaded, then BCMSound (and the other sound modules) will require re-initialisation


Version 5.80. Tagged as 'BuildSys-5_80'

Sprites should be one directory deeper.

Version 5.79. Tagged as 'BuildSys-5_79'

Detail:
  Components/ROOL/Disc - ModuleDB knows the Wimp as 'WindowManager', not 'Wimp'
Admin:
  Fixes error preventing Disc builds from starting


Version 5.78. Tagged as 'BuildSys-5_78'

Mirrors variables used in CModule. Note ${EXPORT} has changed to $CUSTOMEXP}, but nothing seemed to be using the former anyway.
ThemeDefs added to module database.
Replace useof ResApp with ThemeDefs in the disc image.


Version 5.77. Tagged as 'BuildSys-5_77'

Version 5.76. Tagged as 'BuildSys-5_76'

Version 5.75. Tagged as 'BuildSys-5_75'

Change ModuleDB to point to Help in non closed section.
Retagged as BuildSys-5_74.

Forgot how useless 3.50 was without any applications.

Version 5.74. Tagged as 'BuildSys-5_74'

Admin:  If ROM modules use the CModule make file they MUST be set as type C, even
        if they are purely assembler in coding


Version 5.73. Tagged as 'BuildSys-5_73'

Support and BCMVideo
Admin:
  (highlight level of testing that has taken place)
  (bugfix number if appropriate)


Version 5.72. Tagged as 'BuildSys-5_72'

Should be one directory higher up

Version 5.71. Not tagged

Version 5.71. Not tagged

Version 5.71. Not tagged

Adjust switch for Config2Installer

Version 5.71. Not tagged

Version 5.71. Tagged as 'BuildSys-5_71'

Version 5.70. Tagged as 'BuildSys-5_70'

Version 5.69. Tagged as 'BuildSys-5_69'

Detail:
  SDIODriver, SDFS and SDFSFiler added. Also SerialDeviceSupport is now
  built into the ROM.
Admin:
  Changes received from Willi Theiss

Version 5.68. Tagged as 'BuildSys-5_68'

Version 5.67. Tagged as 'BuildSys-5_67'

Detail:
  * Added EtherUSB
  * Moved SharedSnd to same location as in the OMAP3 ROM
  * Removed RPiFiles (not needed now we have filing systems)

Version 5.66. Tagged as 'BuildSys-5_66'

Version 5.65. Tagged as 'BuildSys-5_65'

Version 5.64. Tagged as 'BuildSys-5_64'

Detail:
  Components/ROOL/BCM2835, OMAP3, OMAP3Live, OMAP4, S3C2440, S3C6410 - Removed listings of USB driver debug options now that all that's needed is a simple "DEBUG=TRUE". Removed obsolete RHENIUM options. Disabled building/export of unnecessary drivers.
Admin:
  OMAP3 & BCM2835 ROMs tested.
  Others untested.


Version 5.63. Tagged as 'BuildSys-5_63'

Request from Willi Theiss, not tested here.

Version 5.62. Tagged as 'BuildSys-5_62'

Fix OMAP4, S3C build errors due to Kernel dependency on new header export. Bring OMAP3Live ROM modules in line with OMAP3.

Detail:
  Components/ROOL/OMAP4, S3C2440, S3C6410 - Add SerialDeviceSupport to export phase in order to get Hdr:SerialOp
  Components/ROOL/OMAP3Live - Add SerialDeviceSupport & SerialMouse to ROM
Admin:
  Untested!


Version 5.61. Tagged as 'BuildSys-5_61'

Detail:
  Components/ROOL/OMAP3 - Added SerialDeviceSupport & SerialMouse to the ROM, as they should both be functional with the latest component versions
Admin:
  Tested on rev A2 BB-xM


Version 5.60. Tagged as 'BuildSys-5_60'

Detail:
  ModuleDB - Added DWCDriver
  Components/ROOL/BCM2835 - Added DWCDriver. Removed other USB drivers. Disabled SerKeyMouse since we shouldn't need it now USB is working.
Admin:
  Tested in BCM2835 ROM


Version 5.59. Tagged as 'BuildSys-5_59'

This isn't all that helpful for the current build because the
SD images are likely to be quite different to those for the
current OMAP builds.

Version 5.58. Tagged as 'BuildSys-5_58'

Moved SharedSnd up to the other sound modules, partly to group by function, but mostly so Freeway/ShareFS don't change position as they're commonly unplugged.

Version 5.57. Tagged as 'BuildSys-5_57'