GitLab

Detail:
  Components/ROOL/BCM2835, BCM2835Pico, IOMD32, OMAP3, OMAP3Live, OMAP4, Tungsten - Moved ScreenModes (+FPEmulator) to just before the video drivers, so that (once the EDID changes are submitted) the first mode change will be able to use EDID-derived mode timings instead of fixed ones.
  IOMD change is somewhat non-essential due to lack of EDID reading support, but keeps things consistent with the other ROMs.
  Also moved PandoraKey to be with the other keyboard (USB) drivers.
Admin:
  Tested on BB-xM, Iyonix, Pandora, Raspberry Pi, RiscPC


Version 6.47. Tagged as 'BuildSys-6_47'

Add RTC as an export on the Disc components (for NetTime)
Retire BASICTrans, placing alphabetically pleasing BlendTable in its slot

Version 6.35. Tagged as 'BuildSys-6_35'

Replace RTCAdjust with RTC in IOMD and Tungsten builds.
Add RTC to OMAP3 and OMAP4 builds.

Version 6.33. Tagged as 'BuildSys-6_33'

Detail:
  ModuleDB - Added BlendTable
  Components/ROOL/BCM2835, IOMD32, OMAP4, OMAP4, S3C2440, S3C6410, Tungsten - BlendTable added to all ROMs for use by SpriteExtend
  Components/ROOL/Disc - BlendTable & InverseTable added to export stage in order to allow CFSI-JPEG to build
Admin:
  OMAP3 ROM tested on BB-xM
  CFSI-JPEG tested on Iyonix


Version 6.29. Tagged as 'BuildSys-6_29'

TaskManager bravely steps into the void. This is now consistent with the defaults in Kernel-5_35-4_79_2_183.

Version 6.08. Tagged as 'BuildSys-6_08'

Version 6.06. Tagged as 'BuildSys-6_06'

The only reference to NetUtils is where !InetSetup attempts to load it (silently ignoring any fail).
It also outputs this command into "Internet.Startup" but after an RMEnsure of NetFS 5.79.
Since these are ROM components files, and in every case NetFS 5.79 is present, NetUtils is redundant. !InetSetup should continue as before since it is part of the universal boot sequence and may find itself on a machine with an older NetFS.
Also - moved RTCAdjust up into alphabetical order (this handily keeps the module numbering the same for Tungsten & IOMD as a side effect).

Version 6.05. Tagged as 'BuildSys-6_05'

The component name had an uppercase 'B' which, through the use of the shared TBoxMake makefile in turn became its directory name in resourcefs.
However, with non UK territory the string collation rules would not match this and the Iconbar module would die on init.
Fixes ticket #318.

Version 5.99. Tagged as 'BuildSys-5_99'

Make use of it for the ROMs which include BootCommands

Version 5.90. Tagged as 'BuildSys-5_90'

Version 5.84. Tagged as 'BuildSys-5_84'

Moved SharedSnd up to the other sound modules, partly to group by function, but mostly so Freeway/ShareFS don't change position as they're commonly unplugged.

Version 5.57. Tagged as 'BuildSys-5_57'

Detail:
  Added UnSqzAIF to IOMD32, OMAP3, OMAP3Live, OMAP4, S3C2440, S3C6410 and Tungsten ROM images, to protect against the squeeze 5.03-5.08 bug. Even though the bug hasn't been seen on all platforms, there's no harm in taking precautions against it.
  Added UnSqzAIF to PlingSystem, for 3.70+
Admin:
  New version of UnSqzAIF tested in softload form on Iyonix
  OMAP3 ROM & PlingSystem build OK, others untested


Version 5.52. Tagged as 'BuildSys-5_52'

Detail:
  Components/ROOL/BuildHost - Uncommented out FPEmulator line so builds will work again. Added rompress and zlib (required by rompress).
  Components/ROOL/Tungsten - Enable the VFP/NEON BASIC assembler, now that we've got enough ROM space for it.
Admin:
  Tested with BuildHost & TungstenDev builds


Version 5.47. Tagged as 'BuildSys-5_47'

* Added components file to generate a !System
* Binaries/Browse/BuildEnv/Disc/IOMD32/OMAP4/Printers/Tungsten add heading blocks and line stuff up
* OMAP3 remove unused switch from FPEmulator
* SysMap add mapping from Sovereign to 'V'
* CTools extra qualifiers on some modules to get help right for modules in the 310 directory
* AAsmModule when CMDHELP=None is in force you can infer that no international help is desired, therefore pass this as a switch to the module to allow it to remove the tokens from its help table (based on how the 'standalone' switch is done)

Version 5.35. Tagged as 'BuildSys-5_35'

Add CLEAN_DEPEND support to AAsmModule makefile fragment. Disable VFP/NEON assembler for Tungsten ROM versions of BASIC.

Detail:
  Makefiles/AAsmModule - Added ${CLEAN_DEPEND} as a dependency to the 'clean' rule, to allow components to extend the default rule. This is the same functionality that the CApp fragment offers.
  Components/ROOL/Tungsten - Disable VFP/NEON support in the BASIC assembler, due to lack of ROM space.
Admin:
  Required changes for BASIC 1.49


Version 5.33. Tagged as 'BuildSys-5_33'

Detail:
  Components/ROOL/Tungsten - Added RTSupport, SCSISwitch, SCSISoftUSB, SCSIFS, SCSIFiler and CDFSSoftSCSI to the Iyonix ROM image.
Admin:
  Tested in Iyonix ROM softload


Version 5.30. Tagged as 'BuildSys-5_30'

Detail:
  Components/ROOL/IOMD32, OMAP3, OMAP4, Tungsten - These ROMs now include the SharedSound module
Admin:
  OMAP3 & Tungsten ROMs tested


Version 5.29. Tagged as 'BuildSys-5_29'

Detail:
  Components/ROOL/IOMD32, Components/ROOL/OMAP3, Components/ROOL/S3C2440, Components/ROOL/S3C6410,Components/ROOL/Tungsten - Now all use romlinker as their joiner instead of BigSplit2. Required change so that the new kernel can find the ROM build date in the ROM footer.
  Components/ROOL/OMAP3 - Use noimagesize option to prevent the ROM image size being poked into the ROM/HAL at offset &60
Admin:
  OMAP & Tungsten ROMs built and tested.
  Before my romlinker changes, romlinker was producing identical images to BigSplit2, so there shouldn't be any critical bugs lurking in the code.


Version 5.19. Tagged as 'BuildSys-5_19'

Version 5.05. Tagged as 'BuildSys-5_05'

Admin:
  Tested in a TungstenDev build on an Iyonix
Author:
  srevill

Version 4.79. Tagged as 'BuildSys-4_79'

Detail:
  * Updates to CModule makefile fragment to reduce the number of OS-specific
    rules in main Makefiles:
    + Added (RAM|ROM)(C|ASM)DEFINES variables. These allow the calling makefile
      to specify additional defines for RAM or ROM builds of C or assembler
      source files respectively. Traditionally this was done by having separate
      object files for RAM and ROM corresponding at least to whichever source
      file was responsible for interfacing with ResourceFS, but this requires
      messy additional rules. With this new approach, it is necessary to clean
      the component when switching between RAM and ROM builds, but I don't
      think this will affect many people's workflows.
    + Added CMHGDEPENDS. This should be used to specify which object files need
      a static dependency upon the h file autogenerated from the cmhg file.
      It should be specified in the usual form for object files passed to
      CModule - with...

Detail:
   moduledb and components.tungsten updated
Admin:
   John Ballance, apache


Version 4.69. Tagged as 'BuildSys-4_69'

Version 4.66. Tagged as 'BuildSys-4_66'

Version 4.63. Tagged as 'BuildSys-4_63'

This represents the version released in the Batch 4 "bbe" tarfiles.
Tagged as 'Batch4'