GitLab

Detail:
  corrected references from EtherET to EtherTH in moduleDB and Components files

Admin:
  (highlight level of testing that has taken place)
  (bugfix number if appropriate)


Version 6.40. Tagged as 'BuildSys-6_40'

Detail:
  3 specific lines added into ModuleDB reflecting items in (currently) private branch
  iMx6 components file added
Admin:
  J Ballance initial


Version 6.39. Tagged as 'BuildSys-6_39'

Add RTC as an export on the Disc components (for NetTime)
Retire BASICTrans, placing alphabetically pleasing BlendTable in its slot

Version 6.35. Tagged as 'BuildSys-6_35'

Replace RTCAdjust with RTC in IOMD and Tungsten builds.
Add RTC to OMAP3 and OMAP4 builds.

Version 6.33. Tagged as 'BuildSys-6_33'

Detail:
  ModuleDB - Added BlendTable
  Components/ROOL/BCM2835, IOMD32, OMAP4, OMAP4, S3C2440, S3C6410, Tungsten - BlendTable added to all ROMs for use by SpriteExtend
  Components/ROOL/Disc - BlendTable & InverseTable added to export stage in order to allow CFSI-JPEG to build
Admin:
  OMAP3 ROM tested on BB-xM
  CFSI-JPEG tested on Iyonix


Version 6.29. Tagged as 'BuildSys-6_29'

Version 6.18. Tagged as 'BuildSys-6_18'

TaskManager bravely steps into the void. This is now consistent with the defaults in Kernel-5_35-4_79_2_183.

Version 6.08. Tagged as 'BuildSys-6_08'

The only reference to NetUtils is where !InetSetup attempts to load it (silently ignoring any fail).
It also outputs this command into "Internet.Startup" but after an RMEnsure of NetFS 5.79.
Since these are ROM components files, and in every case NetFS 5.79 is present, NetUtils is redundant. !InetSetup should continue as before since it is part of the universal boot sequence and may find itself on a machine with an older NetFS.
Also - moved RTCAdjust up into alphabetical order (this handily keeps the module numbering the same for Tungsten & IOMD as a side effect).

Version 6.05. Tagged as 'BuildSys-6_05'

Detail:
  ModuleDB - Added BatMgrHAL. Point BatMgr at released souces instead of private ones.
  Components/ROOL/OMAP3, Components/ROOL/OMAP3Live - Added BatMgrHAL to ROM
Admin:
  Tested on BB-xM, Pandora, TouchBook


Version 6.04. Tagged as 'BuildSys-6_04'

The component name had an uppercase 'B' which, through the use of the shared TBoxMake makefile in turn became its directory name in resourcefs.
However, with non UK territory the string collation rules would not match this and the Iconbar module would die on init.
Fixes ticket #318.

Version 5.99. Tagged as 'BuildSys-5_99'

Detail:
  ModuleDB - Added PandoraKey entry
  Components/ROOL/OMAP3, Components/ROOL/OMAP3Live - Added PandoraKey to ROM. Currently at the end of the module chain since it seemed a bit uncooperative when I placed it further near the start
Admin:
  Tested on Pandora, rev C2 BB, rev A2 BB-xM, rev C1 TouchBook


Version 5.98. Tagged as 'BuildSys-5_98'

Make use of it for the ROMs which include BootCommands

Version 5.90. Tagged as 'BuildSys-5_90'

Version 5.84. Tagged as 'BuildSys-5_84'

Version 5.64. Tagged as 'BuildSys-5_64'

Detail:
  Components/ROOL/BCM2835, OMAP3, OMAP3Live, OMAP4, S3C2440, S3C6410 - Removed listings of USB driver debug options now that all that's needed is a simple "DEBUG=TRUE". Removed obsolete RHENIUM options. Disabled building/export of unnecessary drivers.
Admin:
  OMAP3 & BCM2835 ROMs tested.
  Others untested.


Version 5.63. Tagged as 'BuildSys-5_63'

Detail:
  Components/ROOL/OMAP3 - Added SerialDeviceSupport & SerialMouse to the ROM, as they should both be functional with the latest component versions
Admin:
  Tested on rev A2 BB-xM


Version 5.60. Tagged as 'BuildSys-5_60'

Moved SharedSnd up to the other sound modules, partly to group by function, but mostly so Freeway/ShareFS don't change position as they're commonly unplugged.

Version 5.57. Tagged as 'BuildSys-5_57'

EtherUSB added to components files for OMAP3.

Version 5.56. Tagged as 'BuildSys-5_56'

Add FrontEnd to Disc image (in the 500 directory to avoid overwriting the 26 bit only copy in 310 as found in the PlingSystem distribution).

Version 5.53. Tagged as 'BuildSys-5_53'

Detail:
  Added UnSqzAIF to IOMD32, OMAP3, OMAP3Live, OMAP4, S3C2440, S3C6410 and Tungsten ROM images, to protect against the squeeze 5.03-5.08 bug. Even though the bug hasn't been seen on all platforms, there's no harm in taking precautions against it.
  Added UnSqzAIF to PlingSystem, for 3.70+
Admin:
  New version of UnSqzAIF tested in softload form on Iyonix
  OMAP3 ROM & PlingSystem build OK, others untested


Version 5.52. Tagged as 'BuildSys-5_52'

Detail:
  ModuleDB - Added SDCreate entry
  Components/ROOL/OMAP3, OMAP3Live, OMAP4 - Install SDCreate to <Install$Dir>.ABRelease, so it can be picked up by the ABRelease component
Admin:
  Tested with building & packaging OMAP3 ROM


Version 5.45. Tagged as 'BuildSys-5_45'

Do actively report when the CMHG file is deleted in CModule.
Add PRISMLIB to the available module libraries.
Components files updated to pass USB driver switches via CDEFINES not
CFLAGS.
Tested with OMAP3 ROM build, other components files modified by eye but
not tested.

Version 5.39. Tagged as 'BuildSys-5_39'

* Added components file to generate a !System
* Binaries/Browse/BuildEnv/Disc/IOMD32/OMAP4/Printers/Tungsten add heading blocks and line stuff up
* OMAP3 remove unused switch from FPEmulator
* SysMap add mapping from Sovereign to 'V'
* CTools extra qualifiers on some modules to get help right for modules in the 310 directory
* AAsmModule when CMDHELP=None is in force you can infer that no international help is desired, therefore pass this as a switch to the module to allow it to remove the tokens from its help table (based on how the 'standalone' switch is done)

Version 5.35. Tagged as 'BuildSys-5_35'

Detail:
  Components/ROOL/IOMD32, OMAP3, OMAP4, Tungsten - These ROMs now include the SharedSound module
Admin:
  OMAP3 & Tungsten ROMs tested


Version 5.29. Tagged as 'BuildSys-5_29'

Detail:
  Components/ROOL/OMAP3 - Added the DualSerial module to the ROM image.
Admin:
  Tested on rev A2 BB-xM


Version 5.26. Tagged as 'BuildSys-5_26'

Detail:
  ModuleDB - Added entry for CDFSSoftSCSI
  Components/ROOL/OMAP3, Components/ROOL/OMAP4 - Added CDFSSoftSCSI to the OMAP ROM builds
  Components/ROOL/OMAP3 - Disable OMAPVideo debug output since it's no longer needed to try and help track down the black screen on boot issue
Admin:
  Tested in OMAP3 ROM build


Version 5.24. Tagged as 'BuildSys-5_24'

Detail:
  Components/ROOL/IOMD32, Components/ROOL/OMAP3, Components/ROOL/S3C2440, Components/ROOL/S3C6410,Components/ROOL/Tungsten - Now all use romlinker as their joiner instead of BigSplit2. Required change so that the new kernel can find the ROM build date in the ROM footer.
  Components/ROOL/OMAP3 - Use noimagesize option to prevent the ROM image size being poked into the ROM/HAL at offset &60
Admin:
  OMAP & Tungsten ROMs built and tested.
  Before my romlinker changes, romlinker was producing identical images to BigSplit2, so there shouldn't be any critical bugs lurking in the code.


Version 5.19. Tagged as 'BuildSys-5_19'

Detail:
  Components/ROOL/OMAP3 - Kernel is now at FC018000, i.e. 96K offset instead of 64K.
Admin:
  Needed for my next batch of checkins to work. Also temporarily breaks OMAP3 builds until I'm done checking in.


Version 5.15. Tagged as 'BuildSys-5_15'

Version 5.04. Tagged as 'BuildSys-5_04'

Version 5.02. Tagged as 'BuildSys-5_02'

Detail:
  Components/ROOL/OMAP3 - Updated components file to enable OMAPVideo debugging by default, to help try and track down video issues on IGEP boards
Admin:
  Tested in OMAP ROM on rev C2 beagleboard


Version 5.00. Tagged as 'BuildSys-5_00'

Detail:
  SCSIFiler is now no longer dependent on ADFSFiler's resources, so there's no point including ADFSFiler in the ROM image.
Admin:
  Tested on rev C2 beagleboard


Version 4.99. Tagged as 'BuildSys-4_99'

Version 4.98. Tagged as 'BuildSys-4_98'

Version 4.96. Tagged as 'BuildSys-4_96'

Version 4.95. Tagged as 'BuildSys-4_95'

Version 4.93. Tagged as 'BuildSys-4_93'

Detail:
  Binary blob of this module in CVS has been ARMv6-safe since May.
Admin:
  Untested as yet - about to try a ROM autobuild...

Version 4.92. Tagged as 'BuildSys-4_92'

Detail:
  RTSupport is now required to build SCSISoftUSB and (more importantly) included in the ROM image to enable the USB optimisations.
Admin:
  Tested on rev C2 beagleboard


Version 4.87. Tagged as 'BuildSys-4_87'

Detail:
  Thanks to the working !Boot sequence I've been able to finally test networking. As a result, the full set of networking modules are now enabled for OMAP3 ROM builds.
Admin:
  Tested on rev C2 beagleboard with ARMv7-safe copy of EtherUSB. InetSetup, Ping, and ShareFS seemed to behave themselves.


Version 4.84. Tagged as 'BuildSys-4_84'

Update CModule makefile fragment to use a default RESFSDIR if required. Add IIC module to OMAP3 components file.

Detail:
  Makefiles/CModule - makefile fragment now generates a default RESFSDIR value in an identical way to the AAsmModule fragment, easing migration of makefiles to the fragment system.
  Components/ROOL/OMAP3 - IIC module has been added to ROM image
Admin:
  Tested on rev C2 beagleboard


Version 4.80. Tagged as 'BuildSys-4_80'