GitLab

Detail:
  corrected references from EtherET to EtherTH in moduleDB and Components files

Admin:
  (highlight level of testing that has taken place)
  (bugfix number if appropriate)


Version 6.40. Tagged as 'BuildSys-6_40'

Detail:
  3 specific lines added into ModuleDB reflecting items in (currently) private branch
  iMx6 components file added
Admin:
  J Ballance initial


Version 6.39. Tagged as 'BuildSys-6_39'

Special thanks to the estate of Neil Raine for permission to publish the Meteors sources.
Added to disc components.

Version 6.38. Tagged as 'BuildSys-6_38'

Detail:
  ModuleDB - Changed VFPSupport to a C module located in the mixed folder; required for VFPSupport-0_06
  Components/ROOL/CTools - Add VFPSupport export; required for building Debugger-1_86
Admin:
  Tested with Raspberry Pi & OMAP3 ROMs


Version 6.36. Tagged as 'BuildSys-6_36'

Add RTC as an export on the Disc components (for NetTime)
Retire BASICTrans, placing alphabetically pleasing BlendTable in its slot

Version 6.35. Tagged as 'BuildSys-6_35'

Replace RTCAdjust with RTC in IOMD and Tungsten builds.
Add RTC to OMAP3 and OMAP4 builds.

Version 6.33. Tagged as 'BuildSys-6_33'

Revert change to Disc component revision 1.59, there's no point providing just the CLib in 310/Modules since it needs CallASWI and FPEmulator which also aren't here. See Components/PlingSystem and the ReadMe improvement in ABRelease-0_56.

Version 6.31. Tagged as 'BuildSys-6_31'

Version 6.30. Tagged as 'BuildSys-6_30'

Detail:
  ModuleDB - Added BlendTable
  Components/ROOL/BCM2835, IOMD32, OMAP4, OMAP4, S3C2440, S3C6410, Tungsten - BlendTable added to all ROMs for use by SpriteExtend
  Components/ROOL/Disc - BlendTable & InverseTable added to export stage in order to allow CFSI-JPEG to build
Admin:
  OMAP3 ROM tested on BB-xM
  CFSI-JPEG tested on Iyonix


Version 6.29. Tagged as 'BuildSys-6_29'

Version 6.28. Tagged as 'BuildSys-6_28'

Version 6.27. Tagged as 'BuildSys-6_27'

Version 6.26. Tagged as 'BuildSys-6_26'

Version 6.25. Tagged as 'BuildSys-6_25'

Version 6.24. Tagged as 'BuildSys-6_24'

Detail:
  Makefiles/GCCRules - Makefile containing rules for building tools with GCC 4. These rules are intended to replace the rules in StdRules for when GCC is in use.
  ModuleDB - Added libgnu4
  Components/ROOL/BuildHost - Build libgnu4 instead of libgnu
Admin:
  Building BuildHost now requires a GCC4-based setup (Env-1_25, Modules-0_26, Library-1_63, etc.)


Version 6.23. Tagged as 'BuildSys-6_23'

Version 6.22. Tagged as 'BuildSys-6_22'

Now in SndSetup.

Version 6.21. Tagged as 'BuildSys-6_21'

Module did nothing, being superceded by VCHIQ.

Version 6.19. Tagged as 'BuildSys-6_19'

Version 6.18. Tagged as 'BuildSys-6_18'

The application called !Patch isn't OS version specific so can just be classed as a normal utility. Patched modules & 3rd party applications might be OS specific so could go in N00.Patches, but there aren't currently any of those supplied.

Version 6.17. Tagged as 'BuildSys-6_17'

Version 6.16. Tagged as 'BuildSys-6_16'

Version 6.15. Tagged as 'BuildSys-6_15'

Also, don't bother with a duplicate BootCommands post 3.60, the one already in 3.10 (with English messages) will do.

Version 6.14. Tagged as 'BuildSys-6_14'

Version 6.13. Tagged as 'BuildSys-6_13'

Used to resolve SWI names by Squish when building !HForm.

Version 6.12. Tagged as 'BuildSys-6_12'

* Include in disc image (needed by InetSetup when TCP/IP is enabled)
* Remove portable from the IOMD module listing (demoted to export only)

Version 6.11. Tagged as 'BuildSys-6_11'

Detail:
  Components/ROOL/BCM2835 - Insert VCHIQ into ROM, just before BCMSound (the first module that uses it)
  Components/ROOL/Disc - Removed VCHIQ softload, it's both no longer necessary and no longer supported by the makefile
Admin:
  Tested on Raspberry Pi
  BCM2835 changes require VCHIQ-0_05, and will require relatively recent firmware at runtime


Version 6.10. Tagged as 'BuildSys-6_10'

Ditch GameModes dummy module in line with other 5.xx series ROMs it's unlikely that any games pre dating the Risc PC would not need more extensive work to become 32 bit than a simple RMEnsure of a dummy module.

Version 6.09. Tagged as 'BuildSys-6_09'

TaskManager bravely steps into the void. This is now consistent with the defaults in Kernel-5_35-4_79_2_183.

Version 6.08. Tagged as 'BuildSys-6_08'

Version 6.06. Tagged as 'BuildSys-6_06'

The only reference to NetUtils is where !InetSetup attempts to load it (silently ignoring any fail).
It also outputs this command into "Internet.Startup" but after an RMEnsure of NetFS 5.79.
Since these are ROM components files, and in every case NetFS 5.79 is present, NetUtils is redundant. !InetSetup should continue as before since it is part of the universal boot sequence and may find itself on a machine with an older NetFS.
Also - moved RTCAdjust up into alphabetical order (this handily keeps the module numbering the same for Tungsten & IOMD as a side effect).

Version 6.05. Tagged as 'BuildSys-6_05'

Detail:
  ModuleDB - Added BatMgrHAL. Point BatMgr at released souces instead of private ones.
  Components/ROOL/OMAP3, Components/ROOL/OMAP3Live - Added BatMgrHAL to ROM
Admin:
  Tested on BB-xM, Pandora, TouchBook


Version 6.04. Tagged as 'BuildSys-6_04'

Detail:
  It is sensible for the autogenerated swis.h that's included with the
  C tools to include the maximum number of SWI definitions (normally it only
  contains definitions for modules that are included in the build). This adds
  all the necessary exports, except for Hdr:ARM3Cache, which is from an
  obsolete module that hasn't been publicly released.
Admin:
  Tested in a C tools build.

Version 6.02. Tagged as 'BuildSys-6_02'

Detail:
  Lib.ModuleTask, Lib.AcornNC and Lib.HTMLLib don't build at present because
  their makefiles depend upon the Makatic suite that we don't distribute.
  However, no binaries in the disc build actually require these libraries,
  so to remove the build errors, the simplest thing is to exclude the
  libraries from the build.
Admin:
  Tested in a clean-from-CVS disc build

Version 6.01. Tagged as 'BuildSys-6_01'

BootFX happened to be the module _before_ Squash, which was an ironic
choice when it came to adding support for squashed sprite files. Now
it's just _after_ Squash.

Version 6.00. Tagged as 'BuildSys-6_00'

The component name had an uppercase 'B' which, through the use of the shared TBoxMake makefile in turn became its directory name in resourcefs.
However, with non UK territory the string collation rules would not match this and the Iconbar module would die on init.
Fixes ticket #318.

Version 5.99. Tagged as 'BuildSys-5_99'

Detail:
  ModuleDB - Added PandoraKey entry
  Components/ROOL/OMAP3, Components/ROOL/OMAP3Live - Added PandoraKey to ROM. Currently at the end of the module chain since it seemed a bit uncooperative when I placed it further near the start
Admin:
  Tested on Pandora, rev C2 BB, rev A2 BB-xM, rev C1 TouchBook


Version 5.98. Tagged as 'BuildSys-5_98'

Matches p192 of ISBN 1 85250 103 0.

Detail:
  Components/ROOL/BCM2835 - Add SerialDeviceSupport export, as it's required by the kernel. Remove ARM module as its functionality is now implemented by the kernel.
Admin:
  Tested on Raspberry Pi with high processor vectors


Version 5.97. Tagged as 'BuildSys-5_97'