GitLab

Detail:
  The build utilities utils.makejhdr, utils.genpalette and utils.genyuvtabs,
  compiled at build time, are now built using the HostTools shared makefile,
  and so will execute on any RISC OS build host even if the default compiler
  options are to target an incompatible ARM architecture. Also now sets the
  throwback flag when doing builds via the Mk obey file.
Admin:
  Tested using an APCS-R build on an Iyonix.

Version 1.20. Not tagged

Detail:
  Uses suffixed file extensions for compatiblity with both objasm and asasm.
Admin:
  Supplied by Peter Naulls, tested at ROOL

Version 1.20. Not tagged

Detail:
  The use of ARMv4 SMULL instructions is now switched based upon the
  Hdr:CPU.Arch header file. This means that in IOMD ROM builds, only pre-v4
  instructions are used, so it will function on all required target platforms.
  Tungsten and OMAP3 builds will continue to use SMULL.
Admin:
  Inspected binary to ensure correct behaviour. Requires HdrSrc 1.67 or
  1.62/4.162.2.4.

Version 1.20. Tagged as 'SprExtend-1_20'

Removed local definition of XOS_CLI and XColourTrans_SelectTable, replaced
with header file.

Delete swiv2_old (moved to _old directory)

Changed to use {TRUE} and {FALSE} built in objasm variables.

Label dividebyzero fall through had code in the way for debug = {TRUE}.

Trimmed some dead code and definitions.

Stopped thrashing OS_CLI every time a JPEG plot is required to check
ColourTrans version, this is now done once at startup and a flag kept
instead.

Author: Rob Sprowson

Version 1.19. Tagged as 'SprExtend-1_19'

Detail:
  Creates install directories if not already present before doing the
  copy operation.
Admin:
  Will work.

Version 1.18. Tagged as 'SprExtend-1_18'

Detail:
  cache_sprite_doesnt_exist_error routine in MsgCode failed to take into
  account the fact that the messages file might be tokenised. Calling
  MessageTrans_Lookup with R2=0 gives you the length of the unexpanded
  message in R3. Now fixed to work in a better way.
  Also rename fp to r11 in swiv2 file to avoid assembler warnings.
Admin:
  Soft-loaded module tested. Problem seems to be solved.


Version 1.17. Tagged as 'SprExtend-1_17'

C compiler that spots signed divisions of known-positive quantities (eg in
this case (<char>*254)/100), and does them as unsigned instead.

Version 1.16. Tagged as 'SprExtend-1_16'

First pass check now only looks for a SOI tag,not bothering looking
for the "JFIF" text: this lets both JFIF and EXIF files through the
first gate.
Next,improvements to the find_image_dimensions routine to properly
look for tags rather than assuming tag APP0 is always at the start of
the file as it is in ".jpg" files.Again - EXIF files are now understood
as a side effect,plus a nice speed up for when skipping unknown tags.So
rather than loading lots of unused 1k blocks it just sets the file
pointer forwards to the required point.
Tested with a handful of specially contrived EXIF files plus some frommy
Panasonic camera,plus retested the JPEGs in the ChangeFSI test directory
to check that progressive JPEGs are still correctly faulted.
Yay - !Paint and !Draw can now load digital camera piccies!

Version 1.15. Tagged as 'SprExtend-1_15'

* Transformed sprite plotting optimised to not read the screen memory when
  it could be simply avoided - greatly enhances performance on Iyonix.
* Decoding of 1x2 sampled JPEGs fixed.

Version 1.14. Tagged as 'SprExtend-1_14'

Replaced a couple of STMs in error recovery code with code sequences that don't use UNPREDICTABLE (and XScale-unsafe) instructions.

Version 1.13. Tagged as 'SprExtend-1_13'

New version from Kevin: OS_SpriteOp 55 and 56 can take top-bit-set translation table pointers, at the expense of the condition for no translation table being tightened to either 0 or -1 (previously documented as <= 0). This is the version included in release 5.00 of the OS.

Version 1.12. Tagged as 'SprExtend-1_12'

Used to interpret negative translation table pointers as "none"; now just 0
as per documentation.
Plotting 16bpp sprites into 32bpp modes now correctly sets the 3 least
significant bits of each channel - used to be set to 0 due to a typo.
Build option (currently set to on) to use SMULL instructions.

Version 1.11. Tagged as 'SprExtend-1_11'

Detail:
  Don't know why - probably didn't work with where they were?
Admin:
  Made this change months ago - can't remember anything else about it.


Version 1.10. Tagged as 'SprExtend-1_10'

Detail:
  This doesn't work because amu will (correctly) say that the semicolon
    is a command separator.  This is now fixed by passing each pattern
    separately with -e.
Admin:
  Not tested.


Version 1.09. Tagged as 'SprExtend-1_09'

Detail:
  The build structure for this module is not nice - I've sanitised it a
    bit, but it's still not nice.
Admin:
   Built and tested with the test program briefly - the test sprite seems
     to scale and rotate properly.  ChangeFSI not tested.


Version 1.08. Tagged as 'SprExtend-1_08'

  Addition of srccommit files.
Detail:
  * c.jrdjfif, get_dqt had an empty debug loop when debug was disabled.
    This is no longer compiled when debugging is not enabled.
  * VersionNum and VersionASM files added, and Sources.SprExtend modified
    to use symbols exported from there rather than from Version.
Admin:
  Ran on my machine. Previously tested in ROL builds.
  In future, might like to merge Exif support from ROL builds, but don't
  want to do that until I've re-read the specs on Exif format again.

Version 1.07. Tagged as 'SprExtend-1_07'

Sprout from master 1996-11-21 12:57:15 UTC Neil Turton <nturton@gitlab.riscosopen.org> 'Initial revision'
Delete:
    Doc/SA_Changes
    Log426
    Sources/swiv2_old

Sprout from master 1996-11-05 09:45:28 UTC Neil Turton <nturton@gitlab.riscosopen.org> 'Import from cleaned 360 CD'
Delete:
    Log426
    Sources/swiv