GitLab

Machine hung during last check-in; trying again... Apologies for sending out such a huge log message *twice*.

Check for WindowManager 3.97 and ensure Unicode$Path is set in all
!Run[D] files, don't set the Alias$@PrintType_FF4 variable, and updated
Customer build ROM obey file variants. Various other changes to
the Run files for new module versions, updated paths to support
new positions of choices, hotlist and histories (see later), etc.

!Sprites[22] files hold small !app icons for some variants, and
an ic_browse sprite. Some variants now have a Sprites and Sprites22
file instead of just Sprites, with the former containing various
mode 12 or 15 specific sprites.

Text files dragged to the URL writable are treated as ANT URL files. This
relies on URLBarWrit (Toolbars.h) being a unique ID, which it should be,
but beware of the Hotlist and Choices numberspaces...

INPUT TYPE=BUTTON supported. Form items without a FORM tag are now shown
(as MSIE 4, but not NN 4).

'*', '-', '@', '_' and '.' are not escaped when submitting forms now. The
Web interface to the IMDb now works.

INPUT TYPE=HIDDEN items will not affect the line height anymore - so
http://www.hotmail.com/ now has correctly aligned writable icons, for
example. Similarly, TAG_FORM and TAG_FORM_END items could push up
line height and don't anymore.

HRs with a specified pixel width will now influence the size of a table
cell (they didn't before).

BRs now checked by tagno field when the browser needs to know something
was an actual BR tag rather than just a line break signal, and by the
style bit entry when only the indication of a line break is required.

Table widths of 0 or 0% are ignored.

Trace.c updated to report height and background fields in a table_stream.

fm_putsl() writes a terminator into the string; the Forms.c routines were
calling this for displaying INPUT TYPE=PASSWORD fields using the FE_PassCode
literal string (a line of stars). This write into a read only data area
would make the debugger fault the access. A local char array is now used
instead, to get round this (note the use of var[]=literal rather than
var[sizeof(literal)]; strcpy(var, literal) due to some weird compiler bug
that copies the wrong thing into 'var' under some (undefined...)
circumstances).

Text areas don't scroll back to the top line when clicked in anymore;
single line writables don't scroll back to the left either. When
reentering a text area from 'above', the caret appears at the top line
rather than 'somewhere further down'...

ARROWS_MOVE_OUT compile time option at the top of Forms.c defines whether
you must press Tab/Shift+Tab to move between writable fields in forms or
if up/down will drop out of them, though if keyboard control is on this
is enforced (or you get trapped inside the form!).

urlutils_filetype_from_url now uses MimeMap module.

If fetcher is told a page is text, it'll check for a filename extension and
may choose to use this instead (e.g. it may find it's HTML instead). This
is to try and get around duff servers... (e.g. http://www.batalarms.co.uk/).

Save dialogues shouldn't flicker when options that don't change the
filetype are selected (before, the draggable sprite was always reset for
each selection). Noticed the erroneous setting of a static variable in
SaveFile.c by a call to this by SaveObject.c, and so added a flag to
savefile_set_filetype to deal with this - would have been possible to get
the wrong filetype sent to applications or at best the wrong filetype
sprite in the dialogue without that.

The caret shouldn't jump out of a form back to the URL writable if the page
reformats now.

Table background colours now supported (as in the colour you see in the
border space if the cellspacing is large enough; this is as in MSIE, not
as in Navigator). Drawfile output routines updated accordingly.

Corrected erroneous use of wimpt_dx() / wimpt_dy() in a couple of places
in Images.c, which meant that (say) 1x1 images didn't work correctly in
medium resolution display modes.

Now have support for save as text (component ID and event 0x12) and save
as Draw (component ID and event 0x13) buttons. Dubious conditions for
greying and ungreying the print, save source and view source buttons and
menu options sorted out as part of implementing the same for the two new
buttons; added greying out of their associated menu items in passing.

Turned kerning on in draw file objects (does mean a rather heinous
increase in file size, but this is the only way to ensure the draw file
matches the visible page).

Comments before functions in SaveDraw.c are now complete and up to date.

Image and visit histories now generate a crude hash number to speed up
searching for items. It does give a speed increase, though it's a
disappointingly small one.

Issue of left/right margins and cellpaddings sorted out. Now have
redraw_left/right_margin for finding out the basic gap you must leave.
redraw_left/right_gap then gives any extra indentation for LI, BLOCKQUOTE
or whatever. The last two can be subtracted from the display width to
get an available page width for any section of text. Note that
redraw_left_gap replaces redraw_margin. The redraw_start_x function
uses the above to work out where a line's left hand edge should be,
taking account of left/right/centre alignment. HRs have been fixed now
(they were quite broken in v1.30, I think) based on this new model and
the behaviour of MSIE/NN 4.

Fixed width of cells with no contents - cell padding values wouldn't
have worked properly as the reformatter returns 0 rather than the left
hand margin size if given no stream.

Removed FM_Absolute flags for Font_Paint (spotted by DBrown) - sets bit
2, which is reserved...?

IMG width and height in % terms now works correctly; a % of available
width (after margins and indents) or height on the main page or for
a table cell, if the image lies in one. Because of the chicken-and-egg
problem with the latter, the cell must specify a width and/or height
for things to work properly. If this is not done, you'll usually end
up with a 1:1 scaled image (as in Navigator 4, rather than ending up
with no image or even no cell (!), as in MSIE 4).

HEIGHT attribute on a TABLE tag is supported, but only in a crude
fashion; the extra height (if there is any) is distributed over the
rows in a linear fashion. This is probably all you have to do in
practice, but I haven't checked. To maintain a notion of min/max
height as well as width would of course require a great deal more
work...

If using client pull to reload a page with a fragment ('...#name')
specified, then the reload wouldn't work on the same page; it'd just
jump to the fragment position. This won't happen if b->reloading is
set now (so works in conjunction with client pull on the same page
forcing a non-cached fetch). Similarly, if POSTing to such a URL,
a fetch will proceed (both these fixes done originally for
http://jupiter.beseen.com/chat/rooms/g/1678/).

browser_inherit split to browser_inherit and browser_inherit_post_data;
the code for the latter didn't clear any post_data in the child before
copying from the parent either, and could cause flex errors (now fixed).

Res file for Ursula ('Desktop' Browse) build tweaked - bits in the
font choices dialogue renamed, and button bar rearranged to hold the
new Save As Draw button. Other builds have had Save As Draw and
Save As Text buttons added, or not, depending upon availability of
suitable sprites, required UI simplicity, etc.

Now have:

  Browse$ChoicesFile
  Browse$ControlsFile
  Browse$ChoicesSave
  Browse$ControlsSave

(the last two are new) for loading and saving of the Choices or Controls
files. If unset, <App$Dir>.Choices or <App$Dir>.Controls will be set.
E.g., you could set Browse$ChoicesFile to be:

  <App$Dir>.Choices,Choices:WWW.(app).Choices

for loading and

  <Choices$Write>.WWW.(app).Choices

for saving. (The browser never saves Controls at the moment, so the
relevant variable above isn't effectively implemented, but could be
in future). Similarly, to support asymetric loading/saving of the Hotlist,
there are HotlistSave, HistorySave and ImageHistorySave entries in Choices
to complement HotlistPath, HistoryPath and ImageHistoryPath (which are used
for loading). save_save_choices will create directories as needed to obtain
the given path (and has also been fixed in various areas that hadn't been
tested out until now; e.g. zero termination of the AppName$ChoicesFile
variable expansion...). !Run[D] files updated appropriately.

Table widthing code rewritten. Slower, but a lot better on the whole.
Still has some problems - still needs a final 'make sure nothing is
below minimum width' scan, which it should be possible to do without.
No time to fix this at present!

The reformatter will now 'glue together' an LI token followed by any
non-LI token; so a bullet point followed by an item should not be able to
have a line break inserted after the bullet because of very tight width
constraints (it could before - yuk...).

'about:' brings up a page about the browser and any Plug-Ins, as with
Navigator (for example).

URI files support titles, as per spec. version 8. Saving a current
location to the Hotlist will thus give a sensible title now (unless
you're in a frame, so there's no title to get...). Of course, v1.00
files without a title still work.

Note that NOBR is *not* supported in this build and this combined with
the new table widther may cause problems on some sites (e.g. Microsoft's
home page!).

Significant reduction in number of times reformatter is called during
a table widthing session results in a dramatic speed increase for nested
tables (e.g. 64 deep with a paragraph of text in the deepest table takes
about two seconds to load with near-instantaneous subsequent reformats,
as opposed to taking optimistically 28 days for a 32 deep table!).
This code relies on a very big stack of assumptions...

Save as plain text implemented.

Choices, Messages and Res files brought up to date where necessary.
Version number taken to 1.28, 04-Dec-97 (so I don't forget later,
basically...).

Added various TaskObey files to make different browser variants (the Makefile has been updated to support this). At present, TARGET must be set for the

Make file to work (some oddity in AMU causing problems here). Added
Multiuser.h to cope with a non-SINGLE_USER build for Customer.