GitLab

Added MimeMap module support. OBJECT routines now use this to determine if the item is an inline image, and if so pass it to the image routines.

At present, support relies on a (correct) content type.

Text items with no VALUE specified in the HTML were not cleared on
hitting a Reset button as the text field of the token is NULL; fixed.
SELECT lists with no default selection item were not being changed
on hitting a Reset button; fixed. In radio groups with no default
selection specified, no item will be selected. This goes against
the HTML 2 spec but allows broken Navigator-esque forms behaviour.
In consequence, radios can be deselected by clicking on the same
one twice. I'd fixed the flickering experienced when doing this
recently, but that, now, is irrelevant, since the state of a radio
must always change.

Reformatter's new 'find width of a SELECT field' didn't account for
the width of <none> and <many> items, and now does (particularly
important for broken items with no OPTION contents).

Under certain circumstances, illegally named targets would open in the
ancestor rather than a new window - a deliberate decision in the code,
but now reversed due to a test suite failure; they'll open in a new
window instead.

Altered the left hand indent handling for lists so that headings and
body text follow the Navigator 48 pixel indent and the bullet point
items drop to the left of the left hand margin, rather than sitting
on the margin with the text indented to the right.

Tightened up the hotlist_load_directory checking of URLs, so that
only those with '://' in - i.e. look fully specified - are accepted.
HTML files are loaded into a new directory now.

Items without a descriptive title in hotlist_new_url will have the URL
substituted in instead. White space before and after descriptions and
after URLs is stripped. Directories with zero length names or null
strings (after white space is stripped) will still be created, with a
generic name (see Messages, token 'HotlistUntitled').

StrongHelp generator on it. Revealed a spurious toolbox_hide_object call
that would always fault and never do anything, and a few heinous uses
of show_error which have all been removed.

When dragging hotlist items, directories will now be highlighted whenever
the item would be added to them, rather than just over the sprite. In
practice this only changes if the item is open and has contents...

Drag box selections had broken in the hotlist; fixed (uninitialised
variable in hotlist_select_box). Adjust-drags now close the window on
completion. Minor problem with Shift+Drag (copy) reversing order of items
sorted out. Added hotlist_add_html_file and implemented loading of HTML.
DO NOT add broken HTML files, this has not been coded for and URLs of the
form http:///this/that (no host name) will hang the machine (bug in the
cookie code of the HTTP module up to at least version 0.39).

Made SELECT list items only as wide as the widest entry actually appears
(using fm_get_string_width), rather than as wide as the widest character
BBox in the font multiplied by the string length of the longest entry.

Updated !Run[D] files to require HTTP 0.39, FTP 0.12 and File 0.23.

Choices and Controls files are now loaded into malloc space (use chf and cof to address them). Previously only in Main.c, task_dir is now globally visible.

Choices updated to allow 16ths of a point in the font size specification
and the System font face has been removed - it isn't used. The use of
serif and sans serif fonts has been rationalised across builds (e.g. Desktop
builds use what they say, but the Customer build uses Homerton as the
default body (serif, so to speak) font as it matches the box's look and
feel better).

Font loading altered a bit to work properly! Font library defines some
standard startup fonts without using Choices, which Choices can then
override.

Now working on source merged with Kevin Bracey's internationalisation support. UNIFONT is undefined in the Make File for now. All Res and

Choices files updated appropriately.

Having sorted out the old Choices and Messages to form Choices, Controls
and Messages, this build has had the same cleaning up done internally.
This includes greater consistency in naming schemes and the removal of
the inconsitent choices items - e.g. Choices file entries saying 'delay
images' and 'plain backgrounds' where internally all the flags say 'show
images' and 'show backgrounds'. ChoiceDefs.h and CtrlDefs.h added to
clarify the meaning of some fields, though usage of these is not 100%
in the source (there are cases where parameters are passed through to
functions as ints, and those functions still check these against hard
coded values rather than the #define stuff).

Fetcher status return bits (connected, sent request, etc.) now reflected
in status bar. Progress during fetchs to files are reported by %, where
the size of the object is known. Exceeding 100% drops back to a byte
counter, in case the estimated size was wrong. The progress counter
may be updated after specific delays, rather than 'as often as possible',
to reduce flicker (as requested by D.Brown some time ago).

I've done a small rewrite of the fetch prioritisation scheme in FetchPage.c;
how well this performs in general use across different processor speeds
remains to be tested, but certainly it has some advantages. For each small
fetch window before the rewrite, a 4cs tight loop was entered - this gave a
noticable and substantial drain to the Desktop performance if more than one
was opened. Now, several can be up at once with little hit. The actual file
fetch is on half the priority it was before, with all others taken back
just a bit - e.g. from 20cs per poll to 15cs per poll for flat out
reformatting. You don't seem to lose much time on the format in practice,
and the Desktop feels quite a bit lighter at the same time. There's the
potential for smoother frameset loading in this scheme, too.

When Shift+Clicking on a link meant you still fetched inside the main
browser window, several fetches could occur in a frameset - one per frame.
However, now that you can only do this by clicking on a link that leads to
non-displayable data - or by turning off the small fetch windows by
setting UseSmall to 'no' in Choices - a bug where fetchpage_preprocessed
would stop such fetches as new ones were started was revealed.
The API to frames_abort_fetching has now been extended to include a
'stop file spooling too' flag, allowing a fix to be made by having
fetchpage_preprocess's calls not set this (and it doesn't check the
savelink flag is unset before proceeding, since frames_abort_fetching
does that implicitly now).

Had left the RAM transfer buffer at 16 bytes (from testing) accidentally...
Oops. Upped it to 4K. In addition, when loading data by RAM transfer,
the browser didn't notice if a RAMFetch bounced during the transfer. It
would be treated as a 'first' RAMFetch bounce, basically, and try to go to
file transfer - oops. Fixed.

Image deletion routines rewritten; nasty animated GIF bug now gone
(it kept trying to update the cross-referenced image in the browser that
no longer existed, and I've no idea how animated GIFs ever managed to *not*
blow up if a cross referencing browser was shut down; and I've tested
this...). There are now as many image structures as there are total images
in the visible browsers, and no more; cross referenced images in the
to-be-deleted browser have their ownership moved to the cross
referencer before the cross referencee is wiped, with any required fetches
being transferred with them.

Reformatter sped up a bit by getting rid of strlen on the main text field
of tokens in all places bar one, where it is called extremely rarely. This
means direct app-to-app transfer of, say, a 359K text file to the browser
won't run like a drain as it tries to do strlen on a 359K string over and
over again! Most of the time the performance benefits won't really be
noticable, ...

As warned in the last log, pretty much all event codes and component IDs have now changed along with many of the names, to provide a consistent name and numberspace for events and components. This also minimises number clashes (e.g. as was, the Save File origin when opened from a

Hotlist menu with an already-used component ID). To get full details on
this, please carefully read through TBEvents.h.

Res files, Sprites files and Messages files have been updated again both
due to the above, and routine additions (e.g. message support for a few
Hotlist bits and pieces). !Run[D] files updated for FTP 0.11 and
HTTP 0.36.

In the Makefile, the Customer objects list was missing Save - must have
moved something when I should've copied it, when adding in SaveFile or
SaveObject in all probability. Now fixed. Couple of other bits and bobs
fixed in the build environment (e.g. stuff saying !Argo instead of
!Customer). Oh, and I've altered the MakeFile copy options again to the
best compromise I can come up with. Newer is turned on for everything
except !Run[D] and !RunImage, since both of those change between debug
builds - otherwise if you'd built debug and non-debug versions, it was
not possible to switch between them - one version would have the newer
timestamp and thus never get overwritten.

The default hotlist has had a few items added - that'll be about the end
of it, I think; there's more than enough stuff in there now.

Saving of the hotlist from the document menu and of URI files,
directories and selections from the hotlist menu tree is now implemented
- this new save system rocks... Oh, and you can save all images and
backgrounds as sprites.

Saving of items with Shift+Click to other applications directly now
works, and is robust. Unique Scrap filenames are used, with data load
bounces (e.g. if some pra - er, person quits the app they're sending
to) working correctly - that is, give an error, keep the file, rename
it to something safe, and open the directory it lies in. As opposed
to normal app-to-app bounces, where the scrap file is deleted (see
PRM 3-254). This means you can now look at README files in FTP
sites, say, without using a disc intermediate. Or you can send pictures
straight to ChangeFSI, fetch HTML links into editors, and so-on, and
so-on - it's all very funky. Known problems include the ambiguous
'invalid component ID' instead of 'file open' for *normal* (straight to
disc) shift+click saves, and I think I'll introduce a unique name
guarantee of some sort to stop 'file open' in the first place. Odd
that the really tricky part (app-to-app) should be least likely to
suffer from this!

Only the Browse resources are currently valid.

Added Utils.Icons - has a few archives inside containing the resources
(well, some of them) used to build various UI sprites for various builds.
Archived because these are unlikely to change much, and putting them on
CVS was a move to, well, archive the stuff...

SaveDBox objects vanquished and requirements in !Run[D] files removed. The
data save code fits much more neatly in amongst the data load protocol
stuff now (with the slight exception of having to split the SaveObject
source into SaveObject and SaveFile - the former handles multiple persistent
dialogues for Shift+Click on links and the like, the latter handles 'one at
a time' transient dialogues for save source and similar). Export Link is now
supported, too, and writes a 'proper' version URI file. You'll find that
double-clicking on old URI files will work as the URI handler picks them up,
whilst new version ones don't; however, dragging onto the browser will only
work with new version files. Note that support for saving and loading URL
files (ANT suite stuff) is present too, so old URI files can be typed as URL
files if you want to keep them working without modification - the URI
handler itself will hopefully support the defined URI file format soon;
double-clicking on old URI files will stop working at that point. Note
there are *lots* of changes in every Res file to support all this. This may
all seem a bit pointless to some, but the changes do in fact make it very
easy to add new save dialogues all over the place. Certainly much easier
than with the previous system, anyway. In fact, post script, image
'save as sprite' took about half an hour, which I hope proves the worth
of the new system.

Merged in newer hotlist code with support for drag cancelling with Escape
(all relevant Res files appropriately updated) and cancelling scrolling
when you've reached the window scroll limit. Had to move some of the
Wimp message handling stuff to the central Protocols source, as clashes
were occuring, and also the hotlist routines were using independent saving
code - a lot of duplicated effort. This was fair enough as at the time the
Hotlist code was written, the Save code couldn't be used in the way it is
now.

New Save Source and Print buttons on the toolbar of some builds.

Phoenix Sprites file made more efficient - the Acorn base section has been
split from the animated upper region. Browse build has a new grey fade
sprite at the back, which is less grainy than the previous one and only
uses 16 colours (with a 16 greyscale palette).

Not really a bug, bug the routine to start an image fetch for INPUT
TYPE=IMAGE forms items only did so if the src field (or equivalent, for
this tag type) was non-NULL. In fact, you should always call image_new_image
and let that handle the rest, otherwise other sections of the code will fail
as they try to obtain an image number for a given HStream and get -1 back.
This problem only generally manifested itself when loading an HTML file to
the browser straight from an application, as many src fields become NULL
when the relativisation routines find nothing to relativise to...

Authentication got broken somewhere along the line - this has been fixed
(in HTMLLib and the browser).

Ctrl+Click on a cross referenced image updates *all* copies, not just the
one with the image data attached.

Next big step: Rip up TBEvents.h and rebuild that whole approach somewhat.
To all those working on the code, my apologies but this means all Res files
will receive a very large number of alterations and there will be extensive
code changes too (mostly naming convention stuff), in more or less all
source files. I am endeavouring to ensure that the new numberspace
convention does not clash with the work being done by Kevin on
internationalisation.

Open URL implementation more or less complete, though may undergo UI
revision at a later date to allow named frames to be targetted. Hope to use
the ideas in this code as the foundation for other general dialogues.

In token stream dump for TRACE builds, table head items were not indented
as far as they should have been - this is fixed; and manual toolbar redraw
routines have been removed. They never worked, were commented out, and
would never be used in that form anyway.

DragBox source added, but it isn't at all complete and won't work - this is
an 'in spare time' thing. We need custom drag boxes constrained to windows
for the hotlist, and unconstrained for frame border resizing... Hey ho.

Ancestor window extents match visible areas if there are frames (no more
scrolling framesets...!). Frame resizing works whilst new documents fetch
without pulling the extent down now. However, frame horizontal extents
never shrink until a reload which is nasty, and this is all due for a
rewrite. Frames border redrawing routine moved out of Redraw.c and into
Frames.c. Bug regarding the mouse rectangle and frame border widths
(rectangle was too large, so you could squash the edges) for edge-drag
frame resizes fixed.

Window width change reformat tolerance fixed; you could creep the window
width down or up forever without any reformat, and centred objects would
move but not be redrawn (thereby giving rise to subsequent redraw errors).

Filetype on objects saved through Shift+Click correct. Save Source dialogue
recognises if that source is plain text, rather than assuming HTML. A
browser that fetches a file remembers the old store size it had before the
save, so even though the data is now ditched, it reports the same amount of
data fetched afterwards (looked awful when this could, for example,
suddenly say '0' after a file save). Progress indicator is now fully aware
of one or many file saves inside a frameset and reports the number of
saves, a colon, and the cumulative saved data count, instead of reporting
the sum total of fetched data in all frames, including non-file save stuff
(note that for just 1 save, '1:' is not shown as a special case for the
most common condition). A bug related to this, where you could in fact only
do one fetch per frame*set*, has been corrected (only one fetch allowed per
frame still, this is unlikely to ever change).

Hotlist support added (D.Brown's source), with various bits of integration
and modification still in progress there. Note additions to the Messages
files. On the subject of Messages, the whole mucky business about what
goes in Messages or Choices (and a few bugs where lookup_choice was used
instead of lookup_token or vice versa) has been sorted out. Messages
contains, more or less, just that. Choices contains user configurable
stuff which generally can't mess things up too badly. A new file, Controls,
is a Messages file holding the non-user configurable choices, which can
generally make things go badly wrong if misused. A lot of these are tied
to the Res file. StrongED users can get these to automatically fold out
the various sections (EMail me for details). Sorry, but at the time of
writing, Zap doesn't do folding... =8*P

Two bugs with images. Asking for images to be shown in browser B when
browser A uses the same ones and was loaded first didn't work correctly,
and now does (a bit weird - browser A does the fetch and browser B does the
display...). Second one occurred when the background image was also used on
the page as a foreground image. This has been fixed by flagging background
images in the image_info structure, and checking this before cross
referencing. This bit also allowed the image_restart_fetches API to be
extended, so that just background or foreground images may be fetched if
they weren't already and the user asked the browser to show them. Before,
the whole lot had to be fetched together (so turning on 'display
backgrounds' will now kick off an image fetch if required, you don't
need to reload the page anymore).

Makefile copy options tweaked to be 'newer' (so if you're testing with some
temporary Choices file or something, it won't write over it at the end of
every export), and REMOTE_HOTLIST flag added for Customer builds - means
the Hotlist.c functions aren't needed; the old, hotlist-by-file method is
used. Added support for Customer build (see later), though there were very
few additions needed in practice.

Table printing fixed - in many ways it wasn't broken, it was image printing
causing the oddities ever since the global image pool was introduced (this
is, again, fixed). The 'reformat to fit page' option didn't work as coded
any more; tables store cell addresses in the HStreams, so you can't then do
a background reformat in a different browser. Hence, it now has to reformat
to the page width, print, then put the page back again, all in the actual
displayed browser. This doesn't feel as slow in use as it perhaps should,
considering what is going on... Note that a line of a defined fraction (see
Print.h) of page height will now split over page boundaries, so tall images
or tall tables don't cause problems now (aside from the obvious problem of
having the line split over a page at all!). There was a bug in the routine
to print from a given start point until 'n' pages had been filled, in that
it always filled 'n + 1' - now fixed. Finally, as part of the printing
tweaks, a new dialogue exists - PrintStyle - with a similarly named source
file added to deal with it.

Global history auto save / load done, but only to the Choices file path -
the whole browser is still strictly single user at present, with all the
extra work for a multiuser Customer environment yet to be done. This has
shown up a global history corruption problem which I haven't fixed yet.

Rationalising TBEvents.h - things are migrating out of it, and into more
appropriate sources (e.g. definitions relating to the Open URL dialogue are
going into OpenURL.h, etc.). Event codes were at one stage deliberately
diverged in numberspace from the component IDs of typical gadgets raising
the events, to avoid anyone getting confused and thinking the IDs and event
codes must match. However, this is in fact unlikely and it is much easier
to remember the fewer numbers that result from tying the two together where
possible. This has resulted in changes to event codes raised in the
following objects of all Res files: Authorise, Find, OpenURL, and
PrintStyle.

And finally - !Run[D] files for all variants updated to require the latest
toolbox and fetcher modules. All Res files updated for hotlists etc. and
sprites files updated appropriately. All Messages, Choices and Controls
files brought in sync., and an Customer build has been added (based on the
Desktop build binary with different resources).

That's all for now...

Added right-align support.

Limits.h, and ensured consistent comment styling throughout all sources.
Fetch.c/h split to Fetch, FetchHTML and URLveneer. URLstat.c/h produced to
cope with this. OpenURL and Find sources created from bits in the Windows
source file that shouldn't have been there... These will get filled out
shortly. Note that a few functions in Fetch are due to be renamed and moved;
probably to Tokenutils.

Quite a few general source changes throughout many files to sort out swapped toolbars. There will be more work on this shortly. svcprint.c has been modified to allow it to output to a file in PipeFS, so TML-less machines can still use the standard browser debug routines (albeit in a less than elegant fashion). Comments in that source file give more details. Plus a few more bug fixes.

Fixed problems with unsourced images in tables and a couple of other bugs here and there - nothing earth shattering... Just wanted to keep the CVS source up to date.