GitLab

More reformatter code bugs fixed; this one regarding width of items. Any kerned string was overestimated (causing redraw bugs and caret position problems in forms, apart from other minor bits elsewhere) and the default size of a writable icon wasn't especially clever.

Crude Plug-In support; just about manages Java, but can't fetch on
behalf of Plug-In (for example). Had to change the default file access
URL construction to be 'file:/' instead of 'file://', or local file
fetches that reference Java applets won't work. This is in its very
early stages, and is being checked in mostly so that various Choices
issues can be worked on.

FRAMES_SUPPORT #define removed.

Optimised fm_token_font_info().

Added support for LI tokens with text (for ordered lists).

Now outdents bullets from indent value, rather than indenting bullets by
the indent value and further indenting text. May need to look at default
Choices files because of this.

Limited the margin to always be non-negative.

Updated Res files in appropriate builds to hold various (similar) Choices
designs.

Choices related menus were flagged as Shared, but none of the dialogues
(including ColourDBox) were - potential future problems, though shouldn't
cause any leaks at present. This has been sorted out anyway.

Encoding function encoding_init no longer returns an error from
toolbox_create_object, so the Encoding menu and all those attached
to it do not have to be present (e.g. the Customer build).

SUB, SUP, STRIKE and U supported. U underlines the baseline of the body text
font, whilst STRIKE will go through roughly the middle of the lower case
chars even if the font is SUP or SUB. Note that Navigator appears to shift
the underline point for SUB and SUP; it may be necessary to copy this
behaviour, but testing on real sites must proceed before that. There could
also be a problem with the automatic lowering of font size, which Navigator
doesn't do, so any FONT SIZE = -n commands could make it too small. Again,
this needs testing on real sites.

'http://' is added to URLs with no protocol specified, unless they start with
'ftp.', in which case the new behaviour is to add 'ftp://'.

Choices code altered to do less error checking on components! They should be
able to be missing without raising errors. Referencing of the subwindow
array changed from *(subwindows + number) to subwindows[number].

Made trace_tag_name code look pretty...

reformat_useless_token now checks tagno is non-zero.

User Agent string setting now done through URL_GetURL, on a per-session
basis.

Ellipsis character removed from all Messages files, replaced with '...'.
There's little difference between the two in an outline font, and in System
font the latter looks much better. Smart quotes left in, as they look
better in all cases.

Text items with no VALUE specified in the HTML were not cleared on
hitting a Reset button as the text field of the token is NULL; fixed.
SELECT lists with no default selection item were not being changed
on hitting a Reset button; fixed. In radio groups with no default
selection specified, no item will be selected. This goes against
the HTML 2 spec but allows broken Navigator-esque forms behaviour.
In consequence, radios can be deselected by clicking on the same
one twice. I'd fixed the flickering experienced when doing this
recently, but that, now, is irrelevant, since the state of a radio
must always change.

Reformatter's new 'find width of a SELECT field' didn't account for
the width of <none> and <many> items, and now does (particularly
important for broken items with no OPTION contents).

Under certain circumstances, illegally named targets would open in the
ancestor rather than a new window - a deliberate decision in the code,
but now reversed due to a test suite failure; they'll open in a new
window instead.

Altered the left hand indent handling for lists so that headings and
body text follow the Navigator 48 pixel indent and the bullet point
items drop to the left of the left hand margin, rather than sitting
on the margin with the text indented to the right.

Tightened up the hotlist_load_directory checking of URLs, so that
only those with '://' in - i.e. look fully specified - are accepted.
HTML files are loaded into a new directory now.

Items without a descriptive title in hotlist_new_url will have the URL
substituted in instead. White space before and after descriptions and
after URLs is stripped. Directories with zero length names or null
strings (after white space is stripped) will still be created, with a
generic name (see Messages, token 'HotlistUntitled').

Choices and Controls files are now loaded into malloc space (use chf and cof to address them). Previously only in Main.c, task_dir is now globally visible.

Choices updated to allow 16ths of a point in the font size specification
and the System font face has been removed - it isn't used. The use of
serif and sans serif fonts has been rationalised across builds (e.g. Desktop
builds use what they say, but the Customer build uses Homerton as the
default body (serif, so to speak) font as it matches the box's look and
feel better).

Font loading altered a bit to work properly! Font library defines some
standard startup fonts without using Choices, which Choices can then
override.

Now working on source merged with Kevin Bracey's internationalisation support. UNIFONT is undefined in the Make File for now. All Res and

Choices files updated appropriately.

Having sorted out the old Choices and Messages to form Choices, Controls
and Messages, this build has had the same cleaning up done internally.
This includes greater consistency in naming schemes and the removal of
the inconsitent choices items - e.g. Choices file entries saying 'delay
images' and 'plain backgrounds' where internally all the flags say 'show
images' and 'show backgrounds'. ChoiceDefs.h and CtrlDefs.h added to
clarify the meaning of some fields, though usage of these is not 100%
in the source (there are cases where parameters are passed through to
functions as ints, and those functions still check these against hard
coded values rather than the #define stuff).

Fetcher status return bits (connected, sent request, etc.) now reflected
in status bar. Progress during fetchs to files are reported by %, where
the size of th...

Encoding support added: if UNIFONT is defined then the browser will attempt to use the system font to render Unicode characters (new

International module required). If not defined, the browser will just
handle Acorn Latin-1 characters, but HTMLLib will convert other encodings
into Latin-1. Must keep the UNIFONT define in sync with HTMLLib (if
defined HTMLLib outputs UTF-8, otherwise Acorn Latin-1).

Still needed:

Reverse encoding (converting form input etc back into the server's
character set).
Reparse when encoding changes.
Setting of charset from an attribute on the <A> tag.

Created Protocols source file and moved a lot of message handling from handle_messages - the latter now serves as a high level distributor to lower level functions in Protocols. Incidentally, URL files (as used by the ANT suite) can be loaded by dragging to the browser in the same way as URI files - Not A Lot Of People Know That, etc.

Merged new hotlist display type Res file to existing resources, added
support for DataSave message so items can be dragged from the hotlist
to a specific window (RAM transfer for URI and URL files; ScrapFile for
HTML and Text but deleted afterwards and there are appropriate guards
to stop Reload just saying 'not found'; images run through ScrapFile and
there is no choice but to leave them there and do a conventional fetch).

All !RunD files now give a WimpSlot of 2304K. Some small changes to
the Argo and Ursula build Res files to make the menu trees more sensible.
Controls files now take 'file:/' instead of 'file://' in Protocols
section. Definitions at top of URLutils.c *no...

Open URL implementation more or less complete, though may undergo UI
revision at a later date to allow named frames to be targetted. Hope to use
the ideas in this code as the foundation for other general dialogues.

In token stream dump for TRACE builds, table head items were not indented
as far as they should have been - this is fixed; and manual toolbar redraw
routines have been removed. They never worked, were commented out, and
would never be used in that form anyway.

DragBox source added, but it isn't at all complete and won't work - this is
an 'in spare time' thing. We need custom drag boxes constrained to windows
for the hotlist, and unconstrained for frame border resizing... Hey ho.

Ancestor window extents match visible areas if there are frames (no more
scrolling framesets...!). Frame resizing works whilst new documents fetch
without pulling the extent down now. However, frame horizontal extents
never shrink until a reload which is nasty, and this is all due for a
rewrite. Frames border redrawing routine moved out of Redraw.c and into
Frames.c. Bug regarding the mouse rectangle and frame border widths
(rectangle was too large, so you could squash the edges) for edge-drag
frame resizes fixed.

Window width change reformat tolerance fixed; you could creep the window
width down or up forever without any reformat, and centred objects would
move but not be redrawn (thereby giving rise to subsequent redraw errors).

Filetype on objects saved through Shift+Click correct. Save Source dialogue
recognises if that source is plain text, rather than assuming HTML. A
browser that fetches a file remembers the old store size it had before the
save, so even though the data is now ditched, it reports the same amount of
data fetched afterwards (looked awful when this could, for example,
suddenly say '0' after a file save). Progress indicator is now fully aware
of one or many file saves inside a frameset and reports the number of
saves, a colon, and the cumulative saved data count, instead of reporting
the sum total of fetched data in all frames, including non-file save stuff
(note that for just 1 save, '1:' is not shown as a special case for the
most common condition). A bug related to this, where you could in fact only
do one fetch per frame*set*, has been corrected (only one fetch allowed per
frame still, this is unlikely to ever change).

Hotlist support added (D.Brown's source), with various bits of integration
and modification still in progress there. Note additions to the Messages
files. On the subject of Messages, the whole mucky business about what
goes in Messages or Choices (and a few bugs where lookup_choice was used
instead of lookup_token or vice versa) has been sorted out. Messages
contains, more or less, just that. Choices contains user configurable
stuff which generally can't mess things up too badly. A new file, Controls,
is a Messages file holding the non-user configurable choices, which can
generally make things go badly wrong if misused. A lot of these are tied
to the Res file. StrongED users can get these to automatically fold out
the various sections (EMail me for details). Sorry, but at the time of
writing, Zap doesn't do folding... =8*P

Two bugs with images. Asking for images to be shown in browser B when
browser A uses the same ones and was loaded first didn't work correctly,
and now does (a bit weird - browser A does the fetch and browser B does the
display...). Second one occurred when the background image was also used on
the page as a foreground image. This has been fixed by flagging background
images in the image_info structure, and checking this before cross
referencing. This bit also allowed the image_restart_fetches API to be
extended, so that just background or foreground images may be fetched if
they weren't already and the user asked the browser to show them. Before,
the whole lot had to be fetched together (so turning on 'display
backgrounds' will now kick off an image fetch if required, you don't
need to reload the page anymore).

Makefile copy options tweaked to be 'newer' (so if you're testing with some
temporary Choices file or something, it won't write over it at the end of
every export), and REMOTE_HOTLIST flag added for Customer builds - means
the Hotlist.c functions aren't needed; the old, hotlist-by-file method is
used. Added support for Customer build (see later), though there were very
few additions needed in practice.

Table printing fixed - in many ways it wasn't broken, it was image printing
causing the oddities ever since the global image pool was introduced (this
is, again, fixed). The 'reformat to fit page' option didn't work as coded
any more; tables store cell addresses in the HStreams, so you can't then do
a background reformat in a different browser. Hence, it now has to reformat
to the page width, print, then put the page back again, all in the actual
displayed browser. This doesn't feel as slow in use as it perhaps should,
considering what is going on... Note that a line of a defined fraction (see
Print.h) of page height will now split over page boundaries, so tall images
or tall tables don't cause problems now (aside from the obvious problem of
having the line split over a page at all!). There was a bug in the routine
to print from a given start point until 'n' pages had been filled, in that
it always filled 'n + 1' - now fixed. Finally, as part of the printing
tweaks, a new dialogue exists - PrintStyle - with a similarly named source
file added to deal with it.

Global history auto save / load done, but only to the Choices file path -
the whole browser is still strictly single user at present, with all the
extra work for a multiuser Customer environment yet to be done. This has
shown up a global history corruption problem which I haven't fixed yet.

Rationalising TBEvents.h - things are migrating out of it, and into more
appropriate sources (e.g. definitions relating to the Open URL dialogue are
going into OpenURL.h, etc.). Event codes were at one stage deliberately
diverged in numberspace from the component IDs of typical gadgets raising
the events, to avoid anyone getting confused and thinking the IDs and event
codes must match. However, this is in fact unlikely and it is much easier
to remember the fewer numbers that result from tying the two together where
possible. This has resulted in changes to event codes raised in the
following objects of all Res files: Authorise, Find, OpenURL, and
PrintStyle.

And finally - !Run[D] files for all variants updated to require the latest
toolbox and fetcher modules. All Res files updated for hotlists etc. and
sprites files updated appropriately. All Messages, Choices and Controls
files brought in sync., and an Customer build has been added (based on the
Desktop build binary with different resources).

That's all for now...

Limits.h, and ensured consistent comment styling throughout all sources.
Fetch.c/h split to Fetch, FetchHTML and URLveneer. URLstat.c/h produced to
cope with this. OpenURL and Find sources created from bits in the Windows
source file that shouldn't have been there... These will get filled out
shortly. Note that a few functions in Fetch are due to be renamed and moved;
probably to Tokenutils.

Fixed problems with unsourced images in tables and a couple of other bugs here and there - nothing earth shattering... Just wanted to keep the CVS source up to date.