GitLab

OSEntries.h: added a C structure for RISCOS_IICOpV.
GPIODevice.hdr: allocate Pandora and Pi Compute module sub device nos.
HALDevice.hdr/Options.hdr: tabs expanded, capitalised abbreviations.
Not tagged.

Detail:
  hdr/KernelWS - Enlarge the SkippedTables area to encompass IICBus_Base
  s/PMF/IIC - Manually set IICBus_Status of each bus to 0 within IICInit
Admin:
  Bug was introduced in Kernel-5_35-4_79_2_168 when IIC initialisation was moved to earlier in the ROM init sequence, but has gone unnoticed due to it only really affecting the high-level API (and none of the relevant HALs were relying on the kernel for the RAM clear)
  Tested on BB-xM with kernel RAM clear


Version 5.35, 4.79.2.236. Tagged as 'Kernel-5_35-4_79_2_236'

Add more HAL USB definitions to hdr/HALEntries. Add debug option for calling HangWatch_Dump on serious errors.

Detail:
  hdr/HALEntries - Added definition of the struct returned by HAL_USBControllerInfo
  hdr/Options, s/Middle - Added the option to call HangWatch_Dump on serious errors
Admin:
  Tested on BB-xM


Version 5.35, 4.79.2.235. Tagged as 'Kernel-5_35-4_79_2_235'

Detail:
  s.NewReset line 1304 amended to use this variable. It was
  hard codede to 128MB as a compromise between address space reservation and size.
Admin:
  Tested OK to expand to 511MB in task manager. At 512MB the taskmanager window fails.
JB

Version 5.35, 4.79.2.234. Tagged as 'Kernel-5_35-4_79_2_234'

  Admin:
JB

Version 5.35, 4.79.2.233. Tagged as 'Kernel-5_35-4_79_2_233'

JB

Version 5.35, 4.79.2.232. Tagged as 'Kernel-5_35-4_79_2_232'

Detail:
  hdr/VIDCList - ControlList_Interlaced is no longer deprecated, instead the sync/pol flags are.
  See discussion on forums for context:
  https://www.riscosopen.org/forum/forums/3/topics/309?page=9#posts-34152
Admin:
  Tested on BB-xM


Version 5.35, 4.79.2.230. Tagged as 'Kernel-5_35-4_79_2_230'

Detail:
  Also added model A for completeness.
Admin:
  Required by new version of BCM2835 HAL.


Version 5.35, 4.79.2.229. Tagged as 'Kernel-5_35-4_79_2_229'

Detail:
  hdr/HALEntries - Added definitions for the different USB controller types reported by HAL_USBControllerInfo
Admin:
  Tested on Raspberry Pi


Version 5.35, 4.79.2.227. Tagged as 'Kernel-5_35-4_79_2_227'

Add OS_Memory 24 implementation. Change OS_ValidateAddress to use it. Fix kernel leaving the physical access MB in a messy state. Try and protect against infinite abort loops caused by bad environment handlers.

Detail:
  s/MemInfo - Added an implementation of ROL's OS_Memory 24 call. Unlike the old OS_ValidateAddress call, this call should successfully report the presence of all memory areas known to the kernel. It should also correctly indicate which parts of a sparse DA are mapped in, unlike the old OS_ValidateAddress implementation.
  s/ChangeDyn - Update dynamic area handling to construct a lookup table for mapping logical addresses to dynamic areas; this is used by OS_Memory 24 to quickly locate which DA(s) hit a given region
  s/AMBControl/main - Make sure lazy task swapping is marked as disabled when AMB_LazyMapIn is {FALSE} - required so that OS_Memory 24 will give application space the correct flags
  s/ArthurSWIs - Switch OS_ValidateAddress over to using OS_Memory 24, as per ROL. For compatibili...

Detail:
Admin:


Version 5.35, 4.79.2.217. Tagged as 'Kernel-5_35-4_79_2_217'

Detail:
  hdr/VduExt - Define new Service_DisplayChanged reason code for us to issue before anything actually happens. Define new Service_DisplayStatus reason codes for drivers to issue when they change their configuration/capabilities in some way.
  s/Utility - Listen out for Service_DisplayStatus
  s/vdu/vdudriver - When DisplayStatus_Changing/DisplayStatus_Changed is received for the current driver, translate into the appropriate DisplayChanged reason codes so that software which only cares about the current driver doesn't have two sets of service calls to listen out for
  s/vdu/vduswis - When switching driver in OS_ScreenMode 11, issue the new Service_DisplayChanged PreChanging reason code before we update the current GraphicsV driver VDU variable
Admin:
  Tested in Iyonix ROM softload


Version 5.35, 4.79.2.216. Tagged as 'Kernel-5_35-4_79_2_216'

  HAL graphics driver calls.  Added further debug capability
Detail:
  Added additional HAL call. minor code correction in hal graphicsv dispatcher
  Added DebugReg macro to aid debugging
Admin:
  (highlight level of testing that has taken place)
  (bugfix number if appropriate)


Version 5.35, 4.79.2.215. Tagged as 'Kernel-5_35-4_79_2_215'

ClearPhysRAM runs after ARM_Analyse and would wipe out the RAM copies of the various CP15 registers defining which caches are present, leading to the IMB_Full and IMB_Range operations skipping most of their job.
Space freed below DebuggerSpace by moving the RAM copies of the processor vectors up a bit.
Tested with a nobbled HAL which doesn't do the RAM clear, inspecting the workspace in a debugger to see it's preserved (only affects VSMAv6 models).

Version 5.35, 4.79.2.214. Tagged as 'Kernel-5_35-4_79_2_214'

ModeFlag_GreyscalePalette handling improvements. Issue service calls on certain GraphicsV events. Sprite tweaks and fixes.

Detail:
  hdr/VduExt - Add reason codes used by Service_DisplayChanged & Service_DisplayStatus
  s/vdu/vdugrafg - Remove dependency on SpriteReason_BadReasonCode; just use the size of our lookup table instead. Alter SpriteOp lookup table so that unimplemented ops return an error instead of doing nothing. Fix PutSprite incorrectly using the slow GCOL action plotter if a request was made to plot a sprite using its mask but the sprite has none.
  s/vdu/vdugrafl - Update screen redirection handling to set ModeFlag_GreyscalePalette if switching output to a sprite with a greyscale palette or a RISC OS Select alpha mask. Restore the flag to its correct value when restoring screen output.
  s/vdu/vdupalxx - Update ModeFlag_GreyscalePalette in realtime as the palette is changed
  s/vdu/vduswis - Issue Service_DisplayChanged during OS_ScreenMode 11. Issue Service_DisplayStatus during OS_ScreenMode 65 & 66.
Admin:
  Tested on Iyonix, BB-xM


Version 5.35, 4.79.2.210. Tagged as 'Kernel-5_35-4_79_2_210'

Detail:
  hdr/Options, s/ArthurSWIs, s/ChangeDyn, s/PMF/KbdDrA1, s/PMF/key, s/vdu/vdugrafa, s/vdu/vdugrafd, s/vdu/vdugrafhal, s/vdu/vdugrafv, s/vdu/vdumodes, s/vdu/vduwrch:
  - Strip out DoingVdu build switch (did nothing)
  - Strip out Japanese16BitSound switch (did nothing)
  - Strip out MakeModeSelectorsForModeNUmbers switch (altered the mode list structures, but there wasn't any code to do anything with the new data)
  - Strip out remaining uses of UseGraphicsV switch (now hardwired to {TRUE})
  - Strip out ShadowROM switch (altered FixedAreasTable to show the shadow mapping, but code to create the mapping is missing)
  - Strip out PollMouse switch (old Archimedes-era debug/development option)
Admin:
  Tested on BB-xM
  Builds to same binary as previous version


Version 5.35, 4.79.2.204. Tagged as 'Kernel-5_35-4_79_2_204'

Detail:
  This set of changes:
  * Adds basic support for multiple GraphicsV drivers, by way of some new OS_ScreenMode reason codes for registering/deregistering, selecting and enumerating drivers (11, 64-68)
  * Tidies up handling of HAL video calls so that the HAL calls will be transformed into a bona fide GraphicsV driver if they're implemented
  * Changes handling of 16bpp gamma table entries so that they're sent to GraphicsV in a generic form instead of in a VIDC-specific form
  * Adds a new GraphicsV call and defines new VIDC list items to allow GraphicsV drivers to utilise the new pixel formats
  File changes:
  * h/VIDCList, hdr/VIDCList, Makefile - Add new header export containing VIDC list type 3 definitions, to avoid repeated definitions in other components
  * Resources/UK/Messages - Add new GraphicsV/OS_ScreenMode error strings and some missing processor type strings
  * hdr/KernelWS - Clean up some pre-GraphicsV definitions, and add new workspace locations for storing the current GraphicsV driver number and the driver list
  * hdr/Options - Remove obsolete InverseTextTransparency option
  * hdr/VduExt - Add VDU variable 192 for storing GraphicsV driver number (same as ROL's VideoV driver number). Remove old 'Flag_*' mode flag definitions (use new 'ModeFlag_*' defintions instead). Add new OS_ScreenMode reason codes.
  * s/ARM600, s/VMSAv6, s/vdu/vdu23, s/vdu/vdugrafa, s/vdu/vdugrafd, s/vdu/vdupalxx, s/vdu/vdupointer, s/vdu/vduwrch - Strip out pre-GraphicsV code. Update GraphicsV code to use correct driver number.
  * s/ArthurSWIs - Pass the default GraphicsV claimant the VduDriverWorkSpace instead of ZeroPage
  * s/Getall - Add Hdr:VIDCList and s/vdu/VduGrafHAL to list of GETs
  * s/NewIRQs - Remove HAL VSync IRQ initialisation, is now handled by grafvhal. Remove old HAL VsyncIRQ entry point, all VSyncs are now handled by VsyncIRQ_ExtEntry.
  * s/PMF/osbyte - Stop OS_Byte 19 waiting forever if no video driver is active
  * s/PMF/osinit - Remove HAL VSync IRQ initialisation, is now handled by grafvhal
  * s/vdu/vducursoft - Use new workspace variable names and flag names
  * s/vdu/vdudecl - Remove old HALDAG_* definitions, GVDAG_* definitions are used instead. Add definition of the per-driver workspace structure and flags.
  * s/vdu/vdudriver - Remove pre-GraphicsV code. Update InitialiseMode to check for and initialise a HAL driver. Use cached driver features word in a few places instead of calling GraphicsV each time. Update PalIndexTable to disable VIDC mangling of 16bpp gamma tables.
  * s/vdu/vdugrafv, s/vdu/vdugrafhal - HAL<->GraphicsV code split off into its own file (vdugrafhal). Default GraphicsV claimant now only deals with VSync events for the active driver.
  * s/vdu/vdumodes - Get rid of old VIDC List type 3 definiton; now in hdr/VIDCList
  * s/vdu/vduswis - Added OS_ScreenMode reason codes 11 and 64-68 for registering, deregistering, selecting and enumerating GraphicsV drivers. Update mode set code to not bother checking if the driver supports the pixel format; instead we assume that the driver's vet mode call will do the check for us.
Admin:
  Tested in Tungsten, IOMD, OMAP3 & BCM2835 ROMs
  Requires HdrSrc-2_38 and updated video driver modes


Version 5.35, 4.79.2.203. Tagged as 'Kernel-5_35-4_79_2_203'

The kernel will use RTC_Read and RTC_Write to access the hardware clock, while maintaining the software clock as before.
Makefile: header export is now in the RTC module's sources
KernelWS: remove RTCFitted flag
NewReset: sync the time after the module init
i2cutils: deleted clock chip code
osinit: move OS_ResyncTime into PMF/realtime
realtime: mostly packages up ordinals and calls the respective SWI

Tested on IOMD softload.

Version 5.35, 4.79.2.202. Tagged as 'Kernel-5_35-4_79_2_202'

hdr/ExportVals: the copyright header insertion got a bit confused with some of the file contents
TickEvents.s: a bad merge from Ursula branch 4.1.4.2 to trunk 4.2 left behind unmatched push/pull where TickIrqReenter had been removed
hdr/Options & NewIRQs.s: collapse remaining TickIrqReenter switches
osinit.s: when ZeroPage is in a top bit set address only the last buffer pointer would get zeroed

Tip offs from eagle eyed Tim Baldwin.

Version 5.35, 4.79.2.201. Tagged as 'Kernel-5_35-4_79_2_201'

Want LSR not ROR otherwise in the need help + HAL + 2 bit case the IIC address in R1 comes out as &800000A1.
Added HAL device ids for a couple more RTC devices.

Version 5.35, 4.79.2.199. Tagged as 'Kernel-5_35-4_79_2_199'

Add support for the new RISC OS 5 style sprite mode word. Add partial support for alpha channel sprite masks. Implement OS_ScreenMode reasons 13-15

Detail:
  ECFShift/ECFYOffset:
  - hdr/PublicWS - Add ECFShift and ECFYOffset to list of public exports (SpriteExtend was using hardcoded values). Rearrange exports so that VduWorkspace exports are now labelled as such.
  - hdr/KernelWS - Make sure ECFShift & ECFYOffset match their exported locations
  - hdr/OSRSI6, s/Middle - Add OS_ReadSysInfo 6 items 83 & 84, for reading ECFYOffset and ECFShift locations
  Mode flags/VDU variables:
  - Makefile - Add hdr/VduExt to the C header exports
  - hdr/VduExt - Get rid of NotRVVTBarWobblyBits macro and defined VDU variables manually so that Hdr2H will handle them. Begin replacing overly generic 'Flag_*' mode flag definitions with 'ModeFlag_*' instead. Define new flags as required by the new screen/sprite modes. Add OS_ScreenMode reason codes and mode selector format (from s.vdu.vdudecl)
  - NewModes/NEWF2, NewModes/OldPSSrc, NewModes/PSSrc, s.vdu.vdu23, s.vdu.vducursoft, s.vdu.vdudriver, s.vdu.vdugrafg, s.vdu.vdugrafj, s.vdu.vdugrafl, s.vdu.vdumodes, s.vdu.vdupal10, s.vdu.vdupal20, s.vdu.vdupalette, s.vdu.vdupalxx, s.vdu.vduwrch - Renaming Flag_* to ModeFlag_*
  - s.vdu.vdudecl - Remove OS_ScreenMode reason codes & mode selector format definitions; these are now in hdr/VduExt. Flag_* -> ModeFlag_* renaming.
  - s.vdu.vdupalxx - Apply a greyscale palette in PV_SetDefaultPalette if the greyscale mode flag is set
  New sprite types:
  - s.vdu.vdudriver - Extend GenerateModeSelectorVars to deal with the wide mask flag, 64K sprites, and the new RISC OS 5 sprite mode word format.
  - s.vdu.vdugrafdec - Store more information about the sprite in the SprReadNColour ... SprLog2BPC block.
  - s.vdu.vdugrafg - Update SpriteVecHandler to be able to detect whether RISC OS 5 format sprites are allowed palettes. Update SetupSprModeData to store the extra sprite info that's defined in vdugrafdec. Update PutSprite to fault any sprites with wide masks - SpriteExtend must be used for that (once implemented!)
  - s.vdu.vdugrafh - Update WritePixelColour to avoid temporary poking of NColour VDU variable for 8bpp sprites. Correctly replicate data when writing to RISC OS 5 format sprites. Update ReadPixelMask, WritePixelMask, SpriteMaskAddr, GetMaskspWidth to deal with wide masks. Delete obsolete bounce_new_format_masks routine.
  - s.vdu.vdugrafi - Comment updated to reflect new reality
  - s.vdu.vdugrafj - Get rid of unused code block in CreateHeader/PostCreateHeader. Update SanitizeSGetMode to generate RISC OS 5 style sprite mode words where applicable. Update DecideMaskSize to rely on GetMaskspWidth for calculating mask width.
  - s.vdu.vdugrafl - Update SwitchOutputToSprite/SwitchOutputToMask to deal with the new sprite formats. Allow PushModeInfoAnyMonitor to fail.
  - s.vdu.vduswis - Extended OS_ReadModeVariable to cope with new sprite types
  Misc:
  - s.vdu.vdudriver - Fixed bug with VIDCList copying where any -1 value in the structure would terminate the copy, instead of only -1 as a control item number
  - s.vdu.vduswis - Implemented OS_ScreenMode 13 (Mode string to specifier), 14 (mode specifier to string), and 15 (set mode by string). Mostly as per ROL's specs, but minus support for teletext attributes, and plus support for new RISC OS 5 attributes (L... layout specifier, 4096 & 24bpp packed modes, etc.)
  - s.vdu.vduwrch - Pick correct default text colours for the new modes
Admin:
  Tested on BB-xM
  Part of an implementation of the Extended Framebuffer Format spec:
  http://www.riscosopen.org/wiki/documentation/show/Extended%20Framebuffer%20Format%20Specification


Version 5.35, 4.79.2.194. Tagged as 'Kernel-5_35-4_79_2_194'

Version 5.35, 4.79.2.192. Tagged as 'Kernel-5_35-4_79_2_192'

GPIODevice: defines for OMAP4 targets
KernelWS: bump up the IICBus_Count from 3 to 4

Version 5.35, 4.79.2.187. Tagged as 'Kernel-5_35-4_79_2_187'

Detail:
  Briefly, this set of changes:
  * Adjusts PhysRamTable so that it retains the flags passed in by the HAL from OS_AddRAM (by storing them in the lower 12 bits of the size field)
  * Sorts the non-VRAM entries of PhysRamTable by speed and DMA capability, to ensure optimal memory allocation during OS startup.
  * Adjust the initial memory allocation logic to allow the cursor/sound chunk and HAL noncacheable workspace to come from DMA capable memory
  * Extends OS_Memory 12 to accept a 'must be DMA capable' flag in bit 8 of R0. This is the same as available in ROL's OS.
  * Extends OS_DynamicArea 0 to allow the creation of dynamic areas that automatically allocate from DMA capable memory. In ROL's OS this was done by setting bit 12 of R4, but we're using bits 12-14 for specifying the cache policy, so instead bit 15 is used.
  * Fixes OS_ReadSysInfo 6 to return the correct DevicesEnd value now that the IRQ/device limit is computed at runtime
  File changes:
  * hdr/OSEntries - Add definitions of the various flags passed to OS_AddRAM by the HAL. Add a new flag, NoDMA, for memory which can't be used for DMA.
  * hdr/KernelWS - Tidy PhysRamTable definition a bit by removing all the DRAM bank definitions except the first - this makes it easier to search for code which is interacting with the table. Remove VRAMFlags, it's redundant now that the flags are kept in the table. Add DMA allocation info to InitWs.
  * s/AMBControl/memmap - Updated to mask out the flags from PhysRamTable when reading RAM block sizes.
  * s/ARM600 - Strip out a lot of IOMD specific pre-HAL code.
  * s/ChangeDyn - Updated to cope with the flags stored in PhysRamTable. Implement support for DMA-capable dynamic areas. Rewrite InitDynamicAreas to insert pages into the free pool in the right order so that the fastest memory will be taken from it first.
  * s/GetAll, s/Middle - Fix OS_ReadSysInfo 6 to return the correct HAL-specific DevicesEnd value
  * s/HAL - Significant rework of initial RAM allocation code to allow the kernel workspace to come from the fastest DMA incapable RAM, while also allowing allocation of DMA capable memory for HAL NCNB workspace & kernel cursor/sound chunks. ClearPhysRAM rewritten as part of this.
  * s/MemInfo - Updated to cope with the flags stored in PhysRamTable. Add support for the new OS_Memory 12 flag. Update OS_Memory 7 to not assume PhysRamTable entries are sorted in address order, and rip out the old pre-HAL IOMD implementation.
  * s/NewReset - Remove GetPagesFromFreePool option, assume TRUE (as this has been the case for the past 10+ years). Revise a few comments and strip dead code. Update to cope with PhysRamTable flags.
  * s/VMSAv6 - Remove a couple of unused definitions
  * s/vdu/vdudriver - Update to cope with PhysRamTable flags
Admin:
  Tested in Kinetic RiscPC ROM softload, Iyonix softload, & OMAP3


Version 5.35, 4.79.2.186. Tagged as 'Kernel-5_35-4_79_2_186'

hdr/Options: Switch removed
s/Modhand: Switch removed, now considered equivalent to DebugROMInit. DebugROMInit changed so that the callback ordering is as expected, batched up until "callbacks" is hit after Service_PostInit.
PMF/osbyte: Redundant RISC OS 2.01 code deleted

Version 5.35, 4.79.2.184. Tagged as 'Kernel-5_35-4_79_2_184'

SystemName, ROMSizeOffset, HAL32, HAL26 only used here, moved here.
Remove uses of "M_" booleans, apparently that's bad form.
Fix SWIDespatch_Size for the non thumb capable case (was ASSERTing).
Swapped UserMemStart for AppSpaceStart.
Removed last use of OldComboSupport (pre Medusa!).
Removed switch 'CDVPoduleIRQs', a correction to the machine definitions mean this can now simply be switched on NumberOfPodules (previously, IOMD couldn't chain podule interrupts).
Take out disabled sub interrupt support - it's in CVS if you want to try to get it working.
Moved ConfiguredLang to 11 for everyone, it only matters if !Boot fails, and no harm in making it common for 5.xx onwards.

Version 5.35, 4.79.2.183. Tagged as 'Kernel-5_35-4_79_2_183'

Add new HAL call, HAL_IRQMax, to allow the kernel to determine the number of IRQ lines/devices at runtime

Detail:
  hdr/HALEntries - Reuse the old HAL_MonitorLeadID call number for HAL_IRQMax
  hdr/KernelWS - Rearrange CursorChunkAddress workspace a bit. Removed unused OldOscliBuffs and a couple of pre-HAL allocations, and made DefIRQ1Vspace the same size for all build configs. Add an IRQMax var to zero page workspace to cache the value returned by HAL_IRQMax.
  s/HAL - Initialise IRQMax shortly after HAL initialisation. Revise ClearPhysRAM comment to reflect which vars are preserved in the current version of the code.
  s/NewIRQs - Strip out a fair bit of pre-HAL code to make the file more readable. Update OS_ClaimDeviceVector/OS_ReleaseDeviceVector to check against IRQMax instead of the MaxInterrupts compile-time limit.
Admin:
  Tested on BB-xM, Iyonix, RiscPC, Pi
  Although the OS will now nominally adapt at runtime to how many IRQ devices there are, it's still using MaxInterrupts as an upper limit as the device claimant table has a fixed memory allocation.


Version 5.35, 4.79.2.182. Tagged as 'Kernel-5_35-4_79_2_182'

OS_CallAfter and OS_CallEvery were treating the delay in R0 as a signed number, limiting its possible range. The PRM didn't require this (a -ve delay doesn't make sense, so implicitly times are unsigned), reworked to allow times up to 0xFFFFFBFF.
Aside:
  OSLib exports these functions as 'int', but it doesn't seem to make a distinction for unsigned versus signed anyway (other unsigned arguments are plain int too)
  The 'callx' library was already prototyped with unsigned times back in 1997

Added comment to hdr/Options about FirstUnpluggableModule - since the keyboard and mouse drivers got moved out of the kernel in 3.50, the original intent (to not allow you to unplug vital modules) has long since been lost, and really the only use of this value is to save 8 bits of CMOS frugal bits.

Version 5.35, 4.79.2.181. Tagged as 'Kernel-5_35-4_79_2_181'

Permits applications to query what value would be used in the event of a CMOS reset for a given configure value. Notably, the configure plugins will use this in favour of 'ResetCMOS'.
hdr/Options: retire the 'Select16BitSound' switch, add comment for ChecksumCMOS switch
hdr/KernelWS: DuffEntry and Nowhere moved here
Kernel.s: Unused OSMD removed, retire single use of SPIRQ in favour of r13_irq
Middle.s: Retire SPIRQ
NewReset.s: Trim out 300+ lines of CMOS reset defaults, call OS_NVMemory 6 instead
PMF/i2cutils.s: CMOS reset default code and table moved here with refactoring
Note, the previous code preserved YearCMOS during the zeroing, only to unconditionally write it later - so have removed it from the zeroing step.
Note, the locations 80-111 are now considered as system CMOS in the allocations hence are now wiped too (previously they got skipped as user CMOS during R-power-on).

Tested on OMAP3 ROM with delete-power-on and R-power-on variants, and a simple BASIC program to read locations 0-255 via OS_NVMemory.

Version 5.35, 4.79.2.180. Tagged as 'Kernel-5_35-4_79_2_180'

Detail:
  s/Middle - Added OS_ReadSysInfo 13 to allow the kernel to validate a key handler before the owner attempts to install it
  Resources/UK/Messages - Text for new "Bad key handler" error
  s/GetAll, s/PMF/Def - Get rid of now obsolete s/PMF/Def file. It only contained definitions for pre-HAL hardware, and for the key handler layout (now in Hdr:Keyboard)
  hdr/KeyWS - Increased size of KeysDown array so it can hold 768 keys instead of 160. Trim a couple of obsolete variables, and increase CurrKey/OldKey from 1 byte to 4 bytes.
  s/PMF/key, s/PMF/osbyte - Main bulk of the changes for the new key handling. All the important interfaces are now able to deal with extended (i.e. > 8 bit) internal key numbers, and the kernel is able to cope with key handlers which use 16 bit internal/low level key numbers instead of 8 bit.
Admin:
  Tested on Pandora & BB-xM
  Requires HdrSrc-2_20


Version 5.35, 4.79.2.178. Tagged as 'Kernel-5_35-4_79_2_178'

Detail:
  hdr/HALDevice - Added HALDeviceSysPeri_BMU device type and some device IDs for the BMUs in the Pandora & TouchBook
Admin:
  Tested in OMAP3 ROM build


Version 5.35, 4.79.2.177. Tagged as 'Kernel-5_35-4_79_2_177'

More haste, less speed. Retagged as Kernel-5_35-4_79_2_175.

Version 5.35, 4.79.2.175. Tagged as 'Kernel-5_35-4_79_2_175'

Variously the call to TranslateError was either followed (outside the switch) by an unnecessary SETV, or missing SETV for the non international case.
Added DMA controller HAL device for IOMD.

Version 5.35, 4.79.2.174. Tagged as 'Kernel-5_35-4_79_2_174'

Default CMOS tweaks now apply for the RPi hardware. Was missed in
the previous commit.

You can now build the Kernel without the ROM debug output stuff
that's enabled for odd-numbered builds, by passing FREEZE_DEV_REL=TRUE
into the makefile. For example, in the Components file, you'd add:

  -options FREEZE_DEV_REL=TRUE

onto the Kernel line.

Version 5.35, 4.79.2.171. Tagged as 'Kernel-5_35-4_79_2_171'

Detail:
  s/HAL, s/NewReset - Moved IIC initialisation to just after timer initialisation, and crucially, before keyboard scan initialisation. This makes things a lot easier for the HAL if it wants to use IIC during the keyboard scan (previously IIC would be enabled inbetween HAL_KbdScanSetup and the first call to HAL_KbdScan)
  hdr/HALDevice - Added a device ID for the Pandora audio controller
Admin:
  Tested on Pandora


Version 5.35, 4.79.2.168. Tagged as 'Kernel-5_35-4_79_2_168'

Detail:
  hdr/HALDevice - Added new HID device type, Keyboard sub-type, and Pandora keyboard device ID
Admin:
  Tested on Pandora, rev C2 BB, rev A2 BB-xM, rev C1 TouchBook


Version 5.35, 4.79.2.166. Tagged as 'Kernel-5_35-4_79_2_166'

Fix addresses sent to GraphicsV_SetDMAAddress when external framestore in use. Add ID for BCM2835 VDU HAL device.

Detail:
  hdr/KernelWS, s/vdu/vdudriver, s/vdu/vduwrch - Fixed wrong addresses being sent to GraphicsV_SetDMAAddress when an external framestore is in use. Previously VideoPhysAddr was being treated as if it was the base of screen memory, but that's only the case if an internal framestore is in use. Since VideoPhysAddr is part of PhysRamTable it's not possible to change it to point to an external framestore, so a new workspace variable, TrueVideoPhysAddr, is used instead.
  hdr/HALDevice - Added device ID for BCM2835 VDU device
  s/PMF/IIC - Corrected an incorrect comment in IICDoOp
Admin:
  Tested on Raspberry Pi with high processor vectors


Version 5.35, 4.79.2.147.2.22. Tagged as 'Kernel-5_35-4_79_2_147_2_22'

Detail:
  hdr/GPIODevice - Removed existing 'unknown' revision and added 'B rev 1' and 'B rev 2' in its place, ready for new HAL that can report the board revision.
Admin:
  Tested on Raspberry Pi (B rev 1)


Version 5.35, 4.79.2.147.2.21. Tagged as 'Kernel-5_35-4_79_2_147_2_21'

Version 5.35, 4.79.2.147.2.19. Tagged as 'Kernel-5_35-4_79_2_147_2_19'