GitLab

Correct the *Copy command otherwise the monitor configuration !Run file ends up 1 dir too high.

Version 0.88. Tagged as 'ABRelease-0_88'

Detail:
  Tidy unmatched quote (the term is defined earlier in quotes).
Admin:
  Submission from Chris Mahoney.

Built in the Disc environment.
Also, copy in the softload tool for TitaniumDev as for IOMDHAL and Tungsten.

Version 0.87. Tagged as 'ABRelease-0_87'

Version 0.86. Tagged as 'ABRelease-0_86'

Detail:
  Fix wiki links to point at actual page not redirector.
  Copy common paragraphs to OMAP5 from OMAP3/4.
  Add SDCreate notes to iMx6.

Version 0.85. Tagged as 'ABRelease-0_85'

Admin:
  Derived from the BCM2835Dev set.

Version 0.84. Tagged as 'ABRelease-0_84'

To handle the situation where the disc based BASIC V has *not* been loaded, but the disc based BASIC VI has, add a dummy obey file to the Library so that it can start *BASICFPA instead.
At some future point this can be removed when the disc based BASIC combines all 3 floating point types in one.

Version 0.83. Tagged as 'ABRelease-0_83'

Detail:
  Resources/Generic/ZeroPain/!Boot/Choices/Boot/PreDesk/!!ZeroPain/ZeroPain,ffa - Update to ZeroPain 0.07, for better behaviour with the compatibility page introduced by Kernel-5_87
Admin:
  Tested on BB-xM


Version 0.82. Tagged as 'ABRelease-0_82'

Detail:
  Resources/BCM2835(Dev)/release_autobuild,feb - For the release candidate images, we've standardised on calling the ROM riscos/img. But the archives produced by the autobuilder output them under the name 'riscos'. Update the autobuilder to also use riscos/img, to save the user the hassle of renaming the image when installing it.
Admin:
  Untested


Version 0.81. Tagged as 'ABRelease-0_81'

BASIC/BASIC64 added (ref BuildSys-6_90).

Version 0.80. Tagged as 'ABRelease-0_80'

Detail:
  Repoint PreDesk$Configure if no EDID support is available. This ensures that any settings made with the Screen Setup plugin will remain compatible with the host OS.
Admin:
  PreDesk !Run file tested, however the changes to the release_autobuild scripts aren't.

Version 0.79. Tagged as 'ABRelease-0_79'

Add Net components.

Version 0.78. Tagged as 'ABRelease-0_78'

Clarify CMOS use with OMAP3/4, copy notes to BCM2835.
Update FlashQSPI to latest for Titanium.

Version 0.77. Tagged as 'ABRelease-0_77'

Version 0.76. Tagged as 'ABRelease-0_76'

Version 0.75. Tagged as 'ABRelease-0_75'

Detail:
  This change updates the ROM downloads to come bundled with ZeroPain 0.06, which has had the kill switch date moved from the end of 2015 to the release of RISC OS 5.24, and is now able to leverage the Debugger module's ability to generate annotated stack dumps.
  Resources/Generic/ZeroPain/ReadMe.txt - Update ZeroPain readme to cover the new features and kill date
  Resources/Generic/ZeroPain/!Boot/Choices/Boot/PreDesk/!!ZeroPain/ZeroPain,ffa - Update module binary. Built with Norcroft 5.71.
Admin:
  Tested on Raspberry Pi


Version 0.74. Tagged as 'ABRelease-0_74'

When the file's not found, say so, rather than falling through and failing with "Cannot DIM negative amount".

Version 0.73. Tagged as 'ABRelease-0_73'

Softload 1.21 taken.
FlashQSPI 0.06 taken.
Also moved Softload and Prompt into the Generic directory, rather than keeping two copies of the same thing.

Version 0.72. Tagged as 'ABRelease-0_72'

Auto extend (using END=) the WimpSlot when a ROM image too big needs to be loaded, to avoid "No room for this DIM".
Retagged as ABRelease-0_71.

Details:
  OMAP5Dev based on OMAP4Dev, minus the SD card instructions.
  Titanium based on OMAP4Dev, plus flash programming instructions.
Admin:
  Lined up OMAP3 & 4 readme's to 80 columns.

Version 0.71. Tagged as 'ABRelease-0_71'

Vestigial module TinyStubs no longer installed

Version 0.70. Tagged as 'ABRelease-0_70'

Wait until the dir exists before trying to copy a ReadMe there, silly.

Version 0.69. Tagged as 'ABRelease-0_69'

Version 0.68. Tagged as 'ABRelease-0_68'

Detail:
  Resources/(IOMDHAL|IOMDHALDev|Tungsten|TungstenDev)/soft/!Boot/Choices/Boot/PreDesk/!!SoftLoat/SoftLoad,ff8 - Updated to a build of version 1.20 of the tool, to ensure correct operation when running on OS versions which use the new CAM format
Admin:
  Tested on Iyonix, softloading to and from ROMs which use the new and old CAM formats


Version 0.67. Tagged as 'ABRelease-0_67'

Required by BuildSys-6_71.

Version 0.66. Tagged as 'ABRelease-0_66'

Has never been 3.10 compatible so lives in 350 now.

Version 0.65. Tagged as 'ABRelease-0_65'

Detail:
  Resources/Generic/ZeroPain/!Boot/Choices/Boot/PreDesk/!ZeroPain/ZeroPain,ffa - Updated to a build of version 0.04 of the module
  Resources/Generic/ZeroPain/ReadMe.txt - Remove the note that unaligned loads don't work; ZeroPain will now emulate whatever behaviour the system control register indicates are in use
Admin:
  Tested on Raspberry Pi, Iyonix
  Fixes inconsistent abort behaviour of BASIC depending on whether BASIC was built to use unaligned/rotated loads or not


Version 0.64. Tagged as 'ABRelease-0_64'

SWI name correction.

Version 0.63. Tagged as 'ABRelease-0_63'

Detail:
  Resources/Generic/ZeroPain - New folder containing a build of ZeroPain 0.02 plus usage instructions
  Resources/(BCM2835Dev|OMAP3Dev|OMAP4Dev|TungstenDev)/release_autobuild,feb - Updated to add ZeroPain to the output zip file
  Resources/(BCM2835Dev|OMAP3Dev|OMAP4Dev|TungstenDev)/ReadMe.txt - Added warning note about zero page relocation being enabled
Admin:
  release_autobuild tested with packaging an Iyonix ROM


Version 0.62. Tagged as 'ABRelease-0_62'

Retagged as ABRelease-0_61.

The TungstenDev softload readme was still referring to RISC OS 5.16 from 5 years ago.

Version 0.61. Tagged as 'ABRelease-0_61'

Remember to point out that the HardDisc4 needs some extra modules & stuff copying for pre RISC OS 5 machines.

Version 0.60. Tagged as 'ABRelease-0_60'

Version 0.59. Tagged as 'ABRelease-0_59'

Extra note about needing a universal boot, as well as a variant of the procedure for RISC OS 3 (where there isn't a boot merge tool).

Version 0.58. Tagged as 'ABRelease-0_58'

The !SysMerge obey script hadn't taken into account that the sprites files for !System need (one off) moving into a subdirectory to match the !Run and !Boot that it installs. This prevents an error when trying to iconsprites a non existant directory.
Tested on RISC OS 4.02.

Version 0.57. Tagged as 'ABRelease-0_57'

Some users were having trouble spotting that to use the boot sequence prior to RISC OS 5 requires merging the !System download

Version 0.56. Tagged as 'ABRelease-0_56'

Version 0.55. Tagged as 'ABRelease-0_55'

Version 0.54. Tagged as 'ABRelease-0_54'

Not tested, some scope for cut and paste mistakes

Version 0.53. Tagged as 'ABRelease-0_53'

Version 0.52. Tagged as 'ABRelease-0_52'