GitLab

This supports all the load/store instructions, including FPA & VFP/NEON.
Most instructions are handled directly via the base version of the
AbortTrap API that was first implemented in RISC OS Select. However, to
properly cope with LDREX/STREX, and future support for prefetch aborts,
the API has been extended to allow the kernel to request that a block of
memory is mapped in with certain permissions. For LDREX/STREX the kernel
will then rewind the PC so that the instruction can be retried directly.

Test code in Dev/AbortTrap exists in order to allow checking of all
major functionality, along with code for building the code in a
softloadable module for easier/quicker testing.

Detail:
  This change gets rid of the following switches from the source (picking appropriate code paths for a 32bit HAL build):
  * HAL
  * HAL26
  * HAL32
  * No26bitCode
  * No32bitCode
  * IncludeTestSrc
  * FixR9CorruptionInExtensionSWI
  Various old files have also been removed (POST code, Arc/STB keyboard drivers, etc.)
Admin:
  Identical binary to previous revision for IOMD & Raspberry Pi builds


Version 5.49. Tagged as 'Kernel-5_49'

Fix CAO pointer being reset incorrectly when calling OS_ExitAndDie with zero page relocation enabled

Detail:
  s/MoreSWIs - OS_ExitAndDie now correctly sets the CAO to zero when ZeroPage is non-zero
Admin:
  Tested on BB-xM with high processor vectors
  Issue originally spotted by Sprow


Version 5.35, 4.79.2.205. Tagged as 'Kernel-5_35-4_79_2_205'

Variously the call to TranslateError was either followed (outside the switch) by an unnecessary SETV, or missing SETV for the non international case.
Added DMA controller HAL device for IOMD.

Version 5.35, 4.79.2.174. Tagged as 'Kernel-5_35-4_79_2_174'

Add two more DebugTX in the reset sequence to announce power on reset and CMOS reset code paths.
In STB land the range of permitted dates is extended from 2020 (a bit close!) to 2037 when Unix time wraps.

Version 5.35, 4.79.2.133. Tagged as 'Kernel-5_35-4_79_2_133'

Export less in hdr:RISCOS.
Delete unused GetDecimalPair routine.
Move CheckYear with other RTC stuff out of PMF/osword.
Hide DebugROMInit and DebugROMErrors in release (even numbered) versions.

Version 5.35, 4.79.2.127. Tagged as 'Kernel-5_35-4_79_2_127'

Detail:
  s/Arthur3, s/ChangeDyn, s/HAL, s/HeapMan, s/Middle, s/MoreSWIs, s/NewIRQs, s/Utility, s/VMSAv6, s/PMF/key, s/PMF/osbyte, s/PMF/osword, s/vdu/vdudecl, s/vdu/vdudriver, s/vdu/vduplot, s/vdu/vduwrch - Tweaked lots of LDM/STM instructions in order to get rid of the depracation/performance warnings
Admin:
  Tested on rev A2 BB-xM


Version 5.35, 4.79.2.98.2.53. Tagged as 'Kernel-5_35-4_79_2_98_2_53'

Detail:
  A whole mass of changes to add high processor vectors + zero page relocation support to the Cortex branch of the kernel
  At the moment the code can only cope with two ZeroPage locations, &0 and &FFFF0000. But with a bit more tweaking those restrictions can probably be lifted, allowing ZeroPage to be hidden at almost any address (assuming it's fixed at compile time). If I've done my job right, these restrictions should all be enforced by asserts.
  There's a new option, HiProcVecs, in hdr/Options to control whether high processor vectors are used. When enabling it and building a ROM, remember:
  * FPEmulator needs to be built with the FPEAnchor=High option specified in the components file (not FPEAnchorType=High as my FPEmulator commit comments suggested)
  * ShareFS needs unplugging/removing since it can't cope with it yet
  * Iyonix users will need to use the latest ROOL boot sequence, to ensure the softloaded modules are compatible (OMAP, etc. don't really softload much so they're OK with older sequences)
  * However VProtect also needs patching to fix a nasty bug there - http://www.riscosopen.org/tracker/tickets/294
  The only other notable thing I can think of is that the ProcessTransfer code in s/ARM600 & s/VMSAv6 is disabled if high processor vectors are in use (it's fairly safe to say that code is obsolete in HAL builds anyway?)
  Fun challenge for my successor: Try setting ZeroPage to &FFFF00FF (or similar) so its value can be loaded with MVN instead of LDR. Then use positive/negative address offsets to access the contents.
  File changes:
  - hdr/ARMops - Modified ARMop macro to take the ZeroPage pointer as a parameter instead of 'zero'
  - hdr/Copro15ops - Corrected $quick handling in myISB macro
  - hdr/Options - Added ideal setting for us to use for HiProcVecs
  - s/AMBControl/allocate, s/AMBControl/growp, s/AMBControl/mapslot, s/AMBControl/memmap, s/AMBControl/service, s/AMBControl/shrinkp, s/Arthur2, s/Arthur3, s/ArthurSWIs, s/ChangeDyn, s/ExtraSWIs, s/HAL, s/HeapMan, s/Kernel, s/MemInfo, s/Middle, s/ModHand, s/MoreSWIs, s/MsgCode, s/NewIRQs, s/NewReset, s/Oscli, s/PMF/buffer, s/PMF/IIC, s/PMF/i2cutils, s/PMF/key, s/PMF/mouse, s/PMF/osbyte, s/PMF/oseven, s/PMF/osinit, s/PMF/osword, s/PMF/oswrch, s/SWINaming, s/Super1, s/SysComms, s/TickEvents, s/Utility, s/vdu/vdu23, s/vdu/vdudriver, s/vdu/vdugrafl, s/vdu/vdugrafv, s/vdu/vdupalxx, s/vdu/vdupointer, s/vdu/vduswis, s/vdu/vduwrch - Lots of updates to deal with zero page relocation
  - s/ARM600 - UseProcessTransfer option. Zero page relocation support. Deleted pre-HAL ClearPhysRAM code to tidy the file up a bit.
  - s/ARMops - Zero page relocation support. Set CPUFlag_HiProcVecs when high vectors are in use.
  - s/KbdResPC - Disable compilation of dead code
  - s/VMSAv6 - UseProcessTransfer option. Zero page relocation support.
Admin:
  Tested with OMAP & Iyonix ROM softloads, both with high & low zero page.
  High zero page hasn't had extensive testing, but boot sequence + ROM apps seem to work.


Version 5.35, 4.79.2.98.2.48. Tagged as 'Kernel-5_35-4_79_2_98_2_48'

Detail:
  Lots of changes since last version, at least the following:
  * Updated OS timestamp, removed alpha status
  * Negative INKEY OS version changed to &AA
  * GraphicsV is now alocated vector number &2A
  * ROM moved up to &FC000000
  * Max application slot increased to 512 Mbytes (for now)
  * Max size of RMA increased to 256 Mbytes
  * RMA is now first-created dynamic area (so it gets lowest address after
    top of application slot)
  * OS_Memory 10 reimplemeted
  * New OS_ReadSysInfo 6 values 18-22 added
  * OS_ReadSysInfo 8 gains flag bit to indicate soft power-off
  * Misc internal top-bit-set-address fixes
  * *ChangeDynamicArea can take sizes in megabytes or gigabytes
  * Magic word "&off" in R0 passed to OS_Reset powers down if possible
  * Added acceleration: block copy; CLS; text window scroll up; rectangle
    fill
  * Disabled LED flashing in page mode (liable to crash)
  * Masked sprite plot and VDU 5 text avoids reading the screen if possible
  * Framestore made USR mode accessible
  * Fix for VDU 5,127 bug - now relies on font definitions being in extreme
    quarters of memory, rather than bottom half
  * Allocated 64-bit OS_Convert... SWIs
  * IIC errors use allocated error numbers
  * Looks for Dallas RTC before Philips RTC because we're using a Philips
    NVRAM device with the same ID
  * Fix to bug that meant the oscillator in the Dallas RTC wasn't enabled
  * Default mouse type (USB) changed to allocated number
  * Ram disc max size increased to 128 Mbytes (Ursula merge) and made
    cacheable for StrongARMs (not XScale)
  * Branch through zero handler now works in USR mode, by use of a
    trampoline in the system stack to allow PC-relative register storage
  * Address exception handler changed to not use 0 as workspace
  * OS_Memory 13 extended to allow specification of cacheability and access
    privileges
  * Added OS_Memory 16 to return important memory addresses
  * RISCOS_MapInIO() takes cacheable flag in bit 3, access permissions in
    bits 10 and 11, doubly-mapped flag in bit 20, and access permissions
    specified flag in bit 21
  * Bug fix in last version for application abort handlers didn't quite
    work; register shuffle required
  * "Module is not 32-bit compatible" error now reports the module name
  * Default configured language changed from 10 to 11 (now Desktop again)

Version 5.35, 4.79.2.51. Tagged as 'Kernel-5_35-4_79_2_51'

Version 5.35, 4.79.2.48. Tagged as 'Kernel-5_35-4_79_2_48'

1) Bring IOMD HAL more up to date. Add support for new call HAL_CleanerSpace (preparation for StrongARM kernel support).

2) In kernel, add HAL_CleanerSpace call (preparation for
StrongARM and XScale core support). Fix bug found with
ARMv3 support during test on Risc PC.

3) Implement new API for kernel SWIs that have used top
bits of addresses as flags. The new API has an extra
flag that must be set, so kernel can distinguish and
support both APIs. The reason for all this is that
addresses are 32-bits now, people, keep up there. Briefly:

  OS_HeapSort
    bit 31 of r0 set for new API, r1 is full 32-bit address
    flags move from r1 bits 31-29 to r0 bits 30-28

  OS_ReadLine
    bit 31 of r1 set for new API, r0 is full 32-bit address
    flags move from bits 31,30 of r0 to bits 30,29 of r1

  OS_SubstituteArgs
    bit 31 of r2 set for new API, r0 is full 32-bit address
    flag moves from bit 31 of r0 to bit 30 of r2

Tested on Risc PC and briefly on Customer A 2

Ta

Version 5.35, 4.79.2.41. Tagged as 'Kernel-5_35-4_79_2_41'

* Kernel puts sensible default FIQ handler in through the HAL.
* Fix to temporary page uncaching code.

Version 5.35, 4.79.2.30. Tagged as 'Kernel-5_35-4_79_2_30'

* Added ARM_IMB and ARM_IMBRange SWIs as recommended by ARMv5.
* Some early prototype HAL bits popped in - a lot of source restructuring still
  to come.
* New debug target creates an AIF image with debug information, and translates
  this into an ASCII object file for the 16702B logic analyser.

Version 5.35, 4.79.2.1. Tagged as 'Kernel-5_35-4_79_2_1'

Details:
  The Kernel will now compile to produce a pure 32-bit system if No26bitCode is
  set to TRUE.
  If No26bitCode is FALSE, then the Kernel will be a standard 26-bit Kernel,
  although some internal changes have taken place to minimise compile
  switches between the two cases. See Docs.32bit for more technical info.

  The hardest part was the flood-fill...

Other changes:
  Pointer shape changes now take place on the next VSync, rather than actually
  WAITING for the VSync. Turning the Hourglass on shouldn't slow your machine
  down by 5% now :)

  Lots of really crusty pre-IOMD code removed.

Admin:
  Tested in 32 and 26-bit forms in a limited desktop build. Basically, this
  will need to see a lot of use to iron out difficulties. I'd like anyone who
  has a non-frozen project to at least attempt using this Kernel.

Version 5.23. Tagged as 'Kernel-5_23'

Version 4.83. Tagged as 'Kernel-4_83'