GitLab

Detail:
  This change gets rid of the following switches from the source (picking appropriate code paths for a 32bit HAL build):
  * FixCallBacks
  * UseProcessTransfer
  * CanLiveOnROMCard
  * BleedinDaveBell
  * NewStyleEcfs
  * DoVdu23_0_12
  * LCDPowerCtrl
  * HostVdu
  * Print
  * EmulatorSupport
  * TubeInfo
  * AddTubeBashers
  * TubeChar, TubeString, TubeDumpNoStack, TubeNewlNoStack macros
  * FIQDebug
  * VCOstartfix
  * AssemblingArthur (n.b. still defined for safety with anything in Hdr: which uses it, but not used explicitly by the kernel)
  * MouseBufferFix
  * LCDInvert
  * LCDSupport
  * DoInitialiseMode
  * Interruptible32bitModes
  * MouseBufferManager
  * StrongARM (new CacheCleanerHack and InterruptDelay switches added to hdr/Options to cover some functionality that StrongARM previously covered)
  * SAcleanflushbroken
  * StrongARM_POST
  * IrqsInClaimRelease
  * CheckProtectionLink
  * GSWorkspaceInKernelBuffers
  * EarlierReentrancyInDAShrink
  * LongCommandLines
  * ECC
  * NoSPSRcorruption
  * RMTidyDoesNowt
  * RogerEXEY
  * StorkPowerSave
  * DebugForcedReset
  * AssembleKEYV
  * AssemblePointerV
  * ProcessorVectors
  * Keyboard_Type
  Assorted old files have also been deleted.
Admin:
  Identical binary to previous revision for IOMD & Raspberry Pi builds


Version 5.51. Tagged as 'Kernel-5_51'

Detail:
  This change gets rid of the following switches from the source (picking appropriate code paths for a 32bit HAL build):
  * HAL
  * HAL26
  * HAL32
  * No26bitCode
  * No32bitCode
  * IncludeTestSrc
  * FixR9CorruptionInExtensionSWI
  Various old files have also been removed (POST code, Arc/STB keyboard drivers, etc.)
Admin:
  Identical binary to previous revision for IOMD & Raspberry Pi builds


Version 5.49. Tagged as 'Kernel-5_49'

Detail:
  s/vdu/vdugrafj - Rewrite WritePaletteFromSprite to fix some issues with the logic which decides whether to change screen mode:
  - ModeNo was always being treated as if it was a mode selector block, causing bad pointer dereferences if it was actually a numbered mode. Prior to zero page protection the code would have eventually stumbled its way through to the mode change code.
  - For checking the pixel format, only the Log2BPP was being compared, resulting in code deciding that (e.g.) modes with differing RGB order were the same
  - However the eigen value checking was also broken (checking wrong part of generated mode selector block), causing the mode change logic to always be taken
  s/vdu/vdugrafdec - Increase size of SloadModeSel so it's actually large enough to hold the generated mode selector - old code would have run off the end a bit (thankfully, it was the last thing in that particular workspace block)
Admin:
  Tested on BB-xM, *ScreenLoad'ing sprites from various modes
  Fixes issue reported on forums:
  https://www.riscosopen.org/forum/forums/4/topics/3649


Version 5.35, 4.79.2.294. Tagged as 'Kernel-5_35-4_79_2_294'

Detail:
  s/vdu/vdudecl - Add a couple more optimisations to LoadCoordPair - use SXTH where possible, and use LDRSH if data is halfword aligned (not currently the case, but may be in future)
  s/vdu/vdugrafj - Fix PreCreateHeader to allow <=256 colour RISC OS 5 sprites to have palettes
Admin:
  Tested on Pandaboard


Version 5.35, 4.79.2.238. Tagged as 'Kernel-5_35-4_79_2_238'

Add support for the new RISC OS 5 style sprite mode word. Add partial support for alpha channel sprite masks. Implement OS_ScreenMode reasons 13-15

Detail:
  ECFShift/ECFYOffset:
  - hdr/PublicWS - Add ECFShift and ECFYOffset to list of public exports (SpriteExtend was using hardcoded values). Rearrange exports so that VduWorkspace exports are now labelled as such.
  - hdr/KernelWS - Make sure ECFShift & ECFYOffset match their exported locations
  - hdr/OSRSI6, s/Middle - Add OS_ReadSysInfo 6 items 83 & 84, for reading ECFYOffset and ECFShift locations
  Mode flags/VDU variables:
  - Makefile - Add hdr/VduExt to the C header exports
  - hdr/VduExt - Get rid of NotRVVTBarWobblyBits macro and defined VDU variables manually so that Hdr2H will handle them. Begin replacing overly generic 'Flag_*' mode flag definitions with 'ModeFlag_*' instead. Define new flags as required by the new screen/sprite modes. Add OS_ScreenMode reason codes and mode selector format (from s.vdu.vdudecl)
  - NewModes/NEWF2, NewModes/OldPSSrc, NewModes/PSSrc, s.vdu.vdu23, s.vdu.vducursoft, s.vdu.vdudriver, s.vdu.vdugrafg, s.vdu.vdugrafj, s.vdu.vdugrafl, s.vdu.vdumodes, s.vdu.vdupal10, s.vdu.vdupal20, s.vdu.vdupalette, s.vdu.vdupalxx, s.vdu.vduwrch - Renaming Flag_* to ModeFlag_*
  - s.vdu.vdudecl - Remove OS_ScreenMode reason codes & mode selector format definitions; these are now in hdr/VduExt. Flag_* -> ModeFlag_* renaming.
  - s.vdu.vdupalxx - Apply a greyscale palette in PV_SetDefaultPalette if the greyscale mode flag is set
  New sprite types:
  - s.vdu.vdudriver - Extend GenerateModeSelectorVars to deal with the wide mask flag, 64K sprites, and the new RISC OS 5 sprite mode word format.
  - s.vdu.vdugrafdec - Store more information about the sprite in the SprReadNColour ... SprLog2BPC block.
  - s.vdu.vdugrafg - Update SpriteVecHandler to be able to detect whether RISC OS 5 format sprites are allowed palettes. Update SetupSprModeData to store the extra sprite info that's defined in vdugrafdec. Update PutSprite to fault any sprites with wide masks - SpriteExtend must be used for that (once implemented!)
  - s.vdu.vdugrafh - Update WritePixelColour to avoid temporary poking of NColour VDU variable for 8bpp sprites. Correctly replicate data when writing to RISC OS 5 format sprites. Update ReadPixelMask, WritePixelMask, SpriteMaskAddr, GetMaskspWidth to deal with wide masks. Delete obsolete bounce_new_format_masks routine.
  - s.vdu.vdugrafi - Comment updated to reflect new reality
  - s.vdu.vdugrafj - Get rid of unused code block in CreateHeader/PostCreateHeader. Update SanitizeSGetMode to generate RISC OS 5 style sprite mode words where applicable. Update DecideMaskSize to rely on GetMaskspWidth for calculating mask width.
  - s.vdu.vdugrafl - Update SwitchOutputToSprite/SwitchOutputToMask to deal with the new sprite formats. Allow PushModeInfoAnyMonitor to fail.
  - s.vdu.vduswis - Extended OS_ReadModeVariable to cope with new sprite types
  Misc:
  - s.vdu.vdudriver - Fixed bug with VIDCList copying where any -1 value in the structure would terminate the copy, instead of only -1 as a control item number
  - s.vdu.vduswis - Implemented OS_ScreenMode 13 (Mode string to specifier), 14 (mode specifier to string), and 15 (set mode by string). Mostly as per ROL's specs, but minus support for teletext attributes, and plus support for new RISC OS 5 attributes (L... layout specifier, 4096 & 24bpp packed modes, etc.)
  - s.vdu.vduwrch - Pick correct default text colours for the new modes
Admin:
  Tested on BB-xM
  Part of an implementation of the Extended Framebuffer Format spec:
  http://www.riscosopen.org/wiki/documentation/show/Extended%20Framebuffer%20Format%20Specification


Version 5.35, 4.79.2.194. Tagged as 'Kernel-5_35-4_79_2_194'

Variously the call to TranslateError was either followed (outside the switch) by an unnecessary SETV, or missing SETV for the non international case.
Added DMA controller HAL device for IOMD.

Version 5.35, 4.79.2.174. Tagged as 'Kernel-5_35-4_79_2_174'

Detail:
  s/ARMops - Fix IMB_Range_WB_CR7_Lx to clean the correct number of cache lines
  s/HAL - Change CP15 control register flags so unaligned loads are enabled on ARMv6 (to simplify support for ARMv7 where unaligned loads are always enabled, and to match the behaviour expected by the example code in Hdr:CPU.Arch)
  s/AMBControl/memmap - Make AMB_LazyFixUp use the correct L2PT protection flags depending on ARM600/VMSAv6 MMU model. Also guard against problems caused by future L2PT flag changes.
  s/vdu/vdugrafj - Fix previously undiscovered 32bit incompatability in GetSprite (OS_SpriteOp 14/16)
Admin:
  Tested on rev C2 beagleboard


Version 5.35, 4.79.2.98.2.5. Tagged as 'Kernel-5_35-4_79_2_98_2_5'

* Added ARM_IMB and ARM_IMBRange SWIs as recommended by ARMv5.
* Some early prototype HAL bits popped in - a lot of source restructuring still
  to come.
* New debug target creates an AIF image with debug information, and translates
  this into an ASCII object file for the 16702B logic analyser.

Version 5.35, 4.79.2.1. Tagged as 'Kernel-5_35-4_79_2_1'

Details:
  The Kernel will now compile to produce a pure 32-bit system if No26bitCode is
  set to TRUE.
  If No26bitCode is FALSE, then the Kernel will be a standard 26-bit Kernel,
  although some internal changes have taken place to minimise compile
  switches between the two cases. See Docs.32bit for more technical info.

  The hardest part was the flood-fill...

Other changes:
  Pointer shape changes now take place on the next VSync, rather than actually
  WAITING for the VSync. Turning the Hourglass on shouldn't slow your machine
  down by 5% now :)

  Lots of really crusty pre-IOMD code removed.

Admin:
  Tested in 32 and 26-bit forms in a limited desktop build. Basically, this
  will need to see a lot of use to iron out difficulties. I'd like anyone who
  has a non-frozen project to at least attempt using this Kernel.

Version 5.23. Tagged as 'Kernel-5_23'