GitLab

* Added !Madness to ModuleDB
* Added !Madness to disc diversions
* Relocated ArmBE into Library since BASIC has never bothered RMEnsuring it, so EDIT only works if it's on the run path (or had previously been manually loaded)

Version 5.95. Tagged as 'BuildSys-5_95'

* Added to disc image
* Added Raspberry UserIF to !ThemeDefs

Version 5.92. Tagged as 'BuildSys-5_92'

Version 5.89. Tagged as 'BuildSys-5_89'

Detail:
  This module is expecetd to be in the Video subdirectory of System:Modules

Version 5.88. Tagged as 'BuildSys-5_88'

Detail:
  * Added RemotePrinterSupport modules to BuildHost, so disc builds build
    cleanly
  * Added ScreenFX module to Disc build
  * Added components required by the above: USBDriver and PRISMLib
Admin:
  Tested in respective builds

Version 5.86. Tagged as 'BuildSys-5_86'

Version 5.85. Tagged as 'BuildSys-5_85'

Version 5.83. Tagged as 'BuildSys-5_83'

Detail:
  Components/ROOL/Disc - Added VCHIQ softload (+ written offer of sources) to disc image, inside 5.10 predesk. Added PCI module to header export for benefit of building VCHIQ.
Admin:
  Tested on Raspberry Pi


Version 5.82. Tagged as 'BuildSys-5_82'

As the PlingSystem components result in a 26 bit APCS-R module and also outputs Config2Installer into !System.360, this avoids a SysMerge overwriting the 32 bit copy with a 26 bit one and stopping the "System" configure plugin from running when booting the disc image as RISC OS 5, while allowing pre RISC OS 5 without the updated C library to run the installer needed to update the C library.
Clear?

Version 5.81. Not tagged

Sprites should be one directory deeper.

Version 5.79. Tagged as 'BuildSys-5_79'

Detail:
  Components/ROOL/Disc - ModuleDB knows the Wimp as 'WindowManager', not 'Wimp'
Admin:
  Fixes error preventing Disc builds from starting


Version 5.78. Tagged as 'BuildSys-5_78'

Mirrors variables used in CModule. Note ${EXPORT} has changed to $CUSTOMEXP}, but nothing seemed to be using the former anyway.
ThemeDefs added to module database.
Replace useof ResApp with ThemeDefs in the disc image.


Version 5.77. Tagged as 'BuildSys-5_77'

Version 5.76. Tagged as 'BuildSys-5_76'

Version 5.75. Tagged as 'BuildSys-5_75'

Change ModuleDB to point to Help in non closed section.
Retagged as BuildSys-5_74.

Forgot how useless 3.50 was without any applications.

Version 5.74. Tagged as 'BuildSys-5_74'

Should be one directory higher up

Version 5.71. Not tagged

Version 5.71. Not tagged

Adjust switch for Config2Installer

Version 5.71. Not tagged

Version 5.67. Tagged as 'BuildSys-5_67'

Retagged as BuildSys-5_56.

Add FrontEnd to Disc image (in the 500 directory to avoid overwriting the 26 bit only copy in 310 as found in the PlingSystem distribution).

Version 5.53. Tagged as 'BuildSys-5_53'

Detail:
  Components/ROOL/Disc - Added ZLib module to !System (plus build dependent zlib library)
  Moved FileCore header export further up due to other header exports (e.g. ADFS) now being dependent on FileCore's headers
Admin:
  ZLib module tested somewhat


Version 5.49. Tagged as 'BuildSys-5_49'

The HAL (or not HAL) is runtime detected, but as it has international help it can't go before 3.60.

Version 5.46. Tagged as 'BuildSys-5_46'

Version 5.38. Tagged as 'BuildSys-5_38'

Detail:
  Components/ROOL/Disc - Added a RISC OS 5 compatible version of CLib to the !System installation. This allows the disc image to safely be used on versions of RISC OS 5 older than current.
Admin:
  Disc image builds OK and CLib module works OK, but no testing of disc image itself was performed


Version 5.37. Tagged as 'BuildSys-5_37'

* Added components file to generate a !System
* Binaries/Browse/BuildEnv/Disc/IOMD32/OMAP4/Printers/Tungsten add heading blocks and line stuff up
* OMAP3 remove unused switch from FPEmulator
* SysMap add mapping from Sovereign to 'V'
* CTools extra qualifiers on some modules to get help right for modules in the 310 directory
* AAsmModule when CMDHELP=None is in force you can infer that no international help is desired, therefore pass this as a switch to the module to allow it to remove the tokens from its help table (based on how the 'standalone' switch is done)

Version 5.35. Tagged as 'BuildSys-5_35'

Detail:
  Components/ROOL/Disc - Added NetTime and the VIDC sound setup plugin.
Admin:
  Disc image builds OK
  Version 2.02 or above of the non-VIDC SndSetup plugin required otherwise the VIDC version will never be launched.
  NetTime could do with a configuration window in InetSetup


Version 5.32. Tagged as 'BuildSys-5_32'

Version 5.28. Tagged as 'BuildSys-5_28'

Detail:
  Components/ROOL/Disc - Added portable module & callx library to list of exports
Admin:
  Required for SCSISwitch 2.07


Version 5.25. Tagged as 'BuildSys-5_25'

Version 5.22. Tagged as 'BuildSys-5_22'

Version 5.07. Tagged as 'BuildSys-5_07'

Version 4.97. Tagged as 'BuildSys-4_97'

Removed CircleSetup screensaver config - it's meaningless.

Version 4.94. Tagged as 'BuildSys-4_94'

Detail:
  The screensaver setup apps (all called !SvrSetup) each have their source code inside the "Settings" folder for the relevant screen saver - but previously there was no way of building the code for the setup apps. This change fixes that, by adding dedicated ModuleDB entries for each setup app.
Admin:
  Tested on rev C2 beagleboard


Version 4.91. Tagged as 'BuildSys-4_91'

Version 4.90. Tagged as 'BuildSys-4_90'

Version 4.89. Tagged as 'BuildSys-4_89'

Version 4.88. Tagged as 'BuildSys-4_88'

Version 4.86. Tagged as 'BuildSys-4_86'

Version 4.85. Tagged as 'BuildSys-4_85'