GitLab

Version 6.00, 1.142.2.10. Tagged as 'BuildSys-6_00-1_142_2_10'

Version 6.00, 1.142.2.9. Tagged as 'BuildSys-6_00-1_142_2_9'

Version 6.00, 1.142.2.8. Tagged as 'BuildSys-6_00-1_142_2_8'

Version 6.00, 1.142.2.7. Tagged as 'BuildSys-6_00-1_142_2_7'

Version 6.00, 1.142.2.6. Tagged as 'BuildSys-6_00-1_142_2_6'

Version 6.00, 1.142.2.5. Tagged as 'BuildSys-6_00-1_142_2_5'

Version 6.00, 1.142.2.4. Tagged as 'BuildSys-6_00-1_142_2_4'

Version 6.00, 1.142.2.3. Tagged as 'BuildSys-6_00-1_142_2_3'

Version 6.00, 1.142.2.2. Tagged as 'BuildSys-6_00-1_142_2_2'

Version 6.00, 1.142.2.1. Tagged as 'BuildSys-6_00-1_142_2_1'

BootFX happened to be the module _before_ Squash, which was an ironic
choice when it came to adding support for squashed sprite files. Now
it's just _after_ Squash.

Version 6.00. Tagged as 'BuildSys-6_00'

The component name had an uppercase 'B' which, through the use of the shared TBoxMake makefile in turn became its directory name in resourcefs.
However, with non UK territory the string collation rules would not match this and the Iconbar module would die on init.
Fixes ticket #318.

Version 5.99. Tagged as 'BuildSys-5_99'

Detail:
  ModuleDB - Added PandoraKey entry
  Components/ROOL/OMAP3, Components/ROOL/OMAP3Live - Added PandoraKey to ROM. Currently at the end of the module chain since it seemed a bit uncooperative when I placed it further near the start
Admin:
  Tested on Pandora, rev C2 BB, rev A2 BB-xM, rev C1 TouchBook


Version 5.98. Tagged as 'BuildSys-5_98'

Matches p192 of ISBN 1 85250 103 0.

Detail:
  Components/ROOL/BCM2835 - Add SerialDeviceSupport export, as it's required by the kernel. Remove ARM module as its functionality is now implemented by the kernel.
Admin:
  Tested on Raspberry Pi with high processor vectors


Version 5.97. Tagged as 'BuildSys-5_97'

Moving it to !Boot.Library didn't actually help.

Version 5.96. Tagged as 'BuildSys-5_96'

* Added !Madness to ModuleDB
* Added !Madness to disc diversions
* Relocated ArmBE into Library since BASIC has never bothered RMEnsuring it, so EDIT only works if it's on the run path (or had previously been manually loaded)

Version 5.95. Tagged as 'BuildSys-5_95'

Version 5.94. Tagged as 'BuildSys-5_94'

Version 5.93. Tagged as 'BuildSys-5_93'

* Added to disc image
* Added Raspberry UserIF to !ThemeDefs

Version 5.92. Tagged as 'BuildSys-5_92'

Version 5.91. Tagged as 'BuildSys-5_91'

Make use of it for the ROMs which include BootCommands

Version 5.90. Tagged as 'BuildSys-5_90'

Version 5.89. Tagged as 'BuildSys-5_89'

Retagged as BuildSys-5_88.

Detail:
  This module is expecetd to be in the Video subdirectory of System:Modules

Version 5.88. Tagged as 'BuildSys-5_88'

Modify makefile fragments to generate GPA & symbol files when building ROM modules. Add HangWatch to ModuleDB.

Detail:
  Makefiles/AAsmModule, Makefiles/CModule - Modified to generate GPA (for assembler) and symbols (for C) files when building ROM modules. These files are copied into the install folder, allowing them to easily be picked up by debugging tools.
  ModuleDB - Added entry for HangWatch module
Admin:
  Makefile changes tested with BCM2835, OMAP3, and Disc builds


Version 5.87. Tagged as 'BuildSys-5_87'

Detail:
  * Added RemotePrinterSupport modules to BuildHost, so disc builds build
    cleanly
  * Added ScreenFX module to Disc build
  * Added components required by the above: USBDriver and PRISMLib
Admin:
  Tested in respective builds

Version 5.86. Tagged as 'BuildSys-5_86'

Version 5.85. Tagged as 'BuildSys-5_85'

Version 5.84. Tagged as 'BuildSys-5_84'

Not tagged.

Version 5.83. Tagged as 'BuildSys-5_83'

Detail:
  Components/ROOL/Disc - Added VCHIQ softload (+ written offer of sources) to disc image, inside 5.10 predesk. Added PCI module to header export for benefit of building VCHIQ.
Admin:
  Tested on Raspberry Pi


Version 5.82. Tagged as 'BuildSys-5_82'

As the PlingSystem components result in a 26 bit APCS-R module and also outputs Config2Installer into !System.360, this avoids a SysMerge overwriting the 32 bit copy with a 26 bit one and stopping the "System" configure plugin from running when booting the disc image as RISC OS 5, while allowing pre RISC OS 5 without the updated C library to run the installer needed to update the C library.
Clear?

Version 5.81. Not tagged

Detail:
  Components/ROOL/BCM2835 - Some unwanted changes crept into the last commit, preventing the ROM from building without a copy of my HangWatch module (and preventing it from running without switching the kernel to high processor vectors)
Admin:
  Tested with vanilla BCM2835 souce tree


Version 5.81. Tagged as 'BuildSys-5_81'

Detail:
  ModuleDB - Added BCMSound & VCHIQ definitions
  Components/ROOL/BCM2835 - Added BCMSound to ROM, and VCHIQ to header exports
Admin:
  Tested on Raspberry Pi with high processor vectors
  Note - BCMSound won't initialise on startup. First the VCHIQ module needs to be sofloaded, then BCMSound (and the other sound modules) will require re-initialisation


Version 5.80. Tagged as 'BuildSys-5_80'

Sprites should be one directory deeper.

Version 5.79. Tagged as 'BuildSys-5_79'

Detail:
  Components/ROOL/Disc - ModuleDB knows the Wimp as 'WindowManager', not 'Wimp'
Admin:
  Fixes error preventing Disc builds from starting


Version 5.78. Tagged as 'BuildSys-5_78'