GitLab

Detail:
  Components/ROOL/BCM2835, Components/ROOL/BCM2835Pico - Enable SerialDeviceSupport (OS_SerialOp/SerialV bridge to the underlying 'serialctrl' DeviceFS API)
Admin:
  Tested on Raspberry Pi 1 B
  Requires BCM2835-0_59 and DualSerial-0_25-4_8_2_14


Version 6.94. Tagged as 'BuildSys-6_94'

To the module database, and Disc components.

Version 6.93. Tagged as 'BuildSys-6_93'

Detail:
  Ordering of FPE with respect to ScreenModes not important post ScrModes-0_55.

Version 6.92. Tagged as 'BuildSys-6_92'

Copy over the rules that use platform agnostic InstRes to copy their extra resources (for those modules wanting more than just the default Messages+CmdHelp).
Copy over the logic that allows INSERTVERSION to be run on Messages files (from CApp shared makefile) so modules which have a front end can get their dates from Messages.
Add INSERTVERSION facility to CModule too.

Version 6.91. Tagged as 'BuildSys-6_91'

Detail:
  ImageName/SysMap - Add support for "26" machine type
  Components/ROOL/PlingSystem - Remove manual specification of All32 machine type for BASIC - would have resulted in code which isn't ARMv2 compatible. Remove 350 version of TaskWindow - the 310 version should be fine for all OS versions that PlingSystem targets. Document why SharedSnd is using the All machine type.
Admin:
  Tested with PlingSystem build


Version 6.90. Tagged as 'BuildSys-6_90'

Export needed by CDFSSoftATAPI.

Version 6.89. Tagged as 'BuildSys-6_89'

Admin:
  Requires ChangeFSI-1_58 or later.

Version 6.88. Tagged as 'BuildSys-6_88'

Admin:
  Requires ChangeFSI-1_58 or later.

Version 6.88. Tagged as 'BuildSys-6_88'

Version 6.87. Tagged as 'BuildSys-6_87'

Detail:
  See corresponding change in PlingSystem 1.23 for rationale.

ColourPicker exports wanted by RISC_OSLib, MimeMap exports wanted by DOSFS and others.
Retagged as BuildSys-6_86.

Detail:
  Components/ROOL/BCM2835, Components/ROOL/BCM2835Pico - Add BCMSupport to ROM
Admin:
  BCM2835 ROM tested on Pi 1B/2B/3B
  Pico ROM untested


Version 6.86. Tagged as 'BuildSys-6_86'

Version 6.85. Tagged as 'BuildSys-6_85'

Version 6.84. Tagged as 'BuildSys-6_84'

Detail:
  Machine build switch now standardised to be compatible with Hdr:CPU.Arch
  since FPEmulator now relies on that. One side-effect improvement is that
  the binary in System:400.Modules.FPEmulator now includes FPA support so
  RISC OS 4 or 5 users on an A7000+ will no longer lose hardware acceleration
  if they softload FPEmulator.
Admin:
  PlingSystem build now completes again.


Version 6.83. Tagged as 'BuildSys-6_83'

And install it in the bonus binaries.

Version 6.82. Tagged as 'BuildSys-6_82'

Detail:
  OMAPHDMI added to the ModuleDB
Admin:
  Wanted by OMAP5 components file, but omitted in BuildSys-6_77.

Version 6.81. Tagged as 'BuildSys-6_81'

Builds same binary, not tagged.

Add Allocate, for CTools components file.
Move !MakeModes out of the ROM modules section into the disc apps section.
Temporarily remove ATAPI from Titanium so the build completes without error.

Version 6.80. Tagged as 'BuildSys-6_80'

Detail:
  Add OMAP5 HAL, ADFS 4 and SATADriver. Put HALs back in alphabetical order.


Version 6.79. Tagged as 'BuildSys-6_79'

Detail:
  For machine CortexA7 (and A15 and A17).

Detail:
  Rather than fill the Kernel sources with an ever-increasing number of
  platform-specific switches to control the default CMOS settings, this
  change introduces a variable which passes the requirements direct from
  the Components file to the Kernel. Since it uses a comma-separated list
  of address/value pairs, it is inherently extensible. All the symbolic
  names of addresses from Hdr:CMOS are available, and any valid objasm
  expression can be used for the value.


Version 6.78. Tagged as 'BuildSys-6_78'

Detail:
  OMAP5 components, submission from Willi Theiss.
  Titanium components, submission from Elesar.
  Some extra modules in the ModuleDB.
  Added EtherCPSW AutoSense to the disc image.
Admin:
  May not build, some bits still being reviewed.

Version 6.77. Tagged as 'BuildSys-6_77'

Previously located in the Kernel headers, now exported from GPIO.

Version 6.76. Tagged as 'BuildSys-6_76'

Retagged as BuildSys-6_75.

Version 6.75. Tagged as 'BuildSys-6_75'

The ROM build of TinyStubs has done nothing since version 0.07 (1998) except count how many clients it has and refuse to die if non zero. The last RAM set of Toolbox modules to use it was just before Expresso (Java Risc PC) in 1998 also.
The Toolbox modules now make use of more functions than TinyStubs provided so can simply use the normal C libary.
While 'tlink' (the special linker used to link against TinyStubs) is mentioned in passing in application note 280 it doesn't appear Acorn ever released it, plus there's no 32 bit version available.

Tested over several months in an IOMD ROM.

Version 6.74. Tagged as 'BuildSys-6_74'

Detail:
Admin:
  (highlight level of testing that has taken place)
  (bugfix number if appropriate)


Version 6.73. Tagged as 'BuildSys-6_73'

Add BonusBin components file
The former was tediously hand run by ROOL while the sources were first being published and included a lot of components that weren't actally suitable to be RAM loaded, for example because they had no ResourceFS registration step. Many of these have been tidied and included in the HardDisc4/PlingSystem products.

Version 6.72. Tagged as 'BuildSys-6_72'

Formerly buried in FontManager, sources have be split out as a separate component (& VersionNum file).

Remove DDEUtils from PlingSystem (binary identical duplicate of that in the disc image)

Version 6.71. Tagged as 'BuildSys-6_71'

Tagged as BuildSys-6_70.

Using the InstViaRG script CModule will now collate a list of files (using the syntax for the InstRes script employed by the CApp shared makefile) for resources, rather than the previous Messages file only.
The list is specified in INSTRES_FILES, or if for some reason the standalone and ROM versions need to be different INSTRAM_FILES and INSTROM_FILES (cf. INSTAPP_FILES in CApp).
Shock new documentation for CModule added.

Version 6.70. Tagged as 'BuildSys-6_70'

Previously there was a quirky requirement to set RES_OBJ to an empty string to get this to work, now, we only require CUSTOMRES=no like AAsmModule does.
Not tagged, part of a 2 part update.

Ensure FPEmulator is aware of zero page relocation. Keep zero page relocation disabled for iMx6 for now. Add ZeroPain to ModuleDB

Detail:
  Components/ROOL/BCM2835, BCM2835Pico, OMAP3, OMAP3Live, OMAP4, S3C6410, Tungsten - Add "FPEANCHOR=High" to FPEmulator build options so that it uses the relocated FPEAnchor location instead of the old one. In the future FPEmulator will be fixed so that it doesn't use a hard-coded address, but for now we need to manually tell ROM versions where FPEAnchor is.
  Components/ROOL/iMx6 - Override the kernel's default decision and leave zero page relocation disabled. R-Comp can decide when it's a sensible time to enable it.
  ModuleDB - Add ZeroPain. The module isn't used in any components files yet, but it's good to list it here forthe sake of completeness.
Admin:
  Tested with Iyonix ROM build
  Requires Kernel-5_35-4_79_2_268 for FPEAnchor setting to match reality


Version 6.69. Tagged as 'BuildSys-6_69'

Nested include in DebugLib.h requires it, spotted by Martin Avison.

Version 6.68. Tagged as 'BuildSys-6_68'

Detail:
  Components/ROOL/OMAP3, Components/ROOL/OMAP3Live, Components/ROOL/OMAP4 - OMAPVideo-0_34 now requires the OMAP revision to be specified as a makefile parameter rather than via CDEFINES
Admin:
  Tested on BeagleBoard, PandaBoard
  Required for OMAPVideo-0_34 to build


Version 6.67. Tagged as 'BuildSys-6_67'

Want it for everything pre-Risc PC, and for issue 1 Risc PCs without 16 bit sound upgrades.

Version 6.66. Tagged as 'BuildSys-6_66'

Retagged as BuildSys-6_65.