GitLab

Need tboxlib for the messages header for internationalised DWCDriver.
Force the default language CMOS to 10 since Pico is 1 module short, such that BASIC V is the default (not BASIC VI) per discussion https://www.riscosopen.org/forum/forums/5/topics/6744

Version 7.00. Tagged as 'BuildSys-7_00'

Requires BCM2835-0_61 and SDCMOS-0_17.

Version 6.95. Tagged as 'BuildSys-6_95'

Detail:
  Components/ROOL/BCM2835, Components/ROOL/BCM2835Pico - Enable SerialDeviceSupport (OS_SerialOp/SerialV bridge to the underlying 'serialctrl' DeviceFS API)
Admin:
  Tested on Raspberry Pi 1 B
  Requires BCM2835-0_59 and DualSerial-0_25-4_8_2_14


Version 6.94. Tagged as 'BuildSys-6_94'

Detail:
  Ordering of FPE with respect to ScreenModes not important post ScrModes-0_55.

Version 6.92. Tagged as 'BuildSys-6_92'

ColourPicker exports wanted by RISC_OSLib, MimeMap exports wanted by DOSFS and others.
Retagged as BuildSys-6_86.

Detail:
  Components/ROOL/BCM2835, Components/ROOL/BCM2835Pico - Add BCMSupport to ROM
Admin:
  BCM2835 ROM tested on Pi 1B/2B/3B
  Pico ROM untested


Version 6.86. Tagged as 'BuildSys-6_86'

Detail:
  Rather than fill the Kernel sources with an ever-increasing number of
  platform-specific switches to control the default CMOS settings, this
  change introduces a variable which passes the requirements direct from
  the Components file to the Kernel. Since it uses a comma-separated list
  of address/value pairs, it is inherently extensible. All the symbolic
  names of addresses from Hdr:CMOS are available, and any valid objasm
  expression can be used for the value.


Version 6.78. Tagged as 'BuildSys-6_78'

Ensure FPEmulator is aware of zero page relocation. Keep zero page relocation disabled for iMx6 for now. Add ZeroPain to ModuleDB

Detail:
  Components/ROOL/BCM2835, BCM2835Pico, OMAP3, OMAP3Live, OMAP4, S3C6410, Tungsten - Add "FPEANCHOR=High" to FPEmulator build options so that it uses the relocated FPEAnchor location instead of the old one. In the future FPEmulator will be fixed so that it doesn't use a hard-coded address, but for now we need to manually tell ROM versions where FPEAnchor is.
  Components/ROOL/iMx6 - Override the kernel's default decision and leave zero page relocation disabled. R-Comp can decide when it's a sensible time to enable it.
  ModuleDB - Add ZeroPain. The module isn't used in any components files yet, but it's good to list it here forthe sake of completeness.
Admin:
  Tested with Iyonix ROM build
  Requires Kernel-5_35-4_79_2_268 for FPEAnchor setting to match reality


Version 6.69. Tagged as 'BuildSys-6_69'

Detail:
  Components/ROOL/BCM2835, BCM2835Pico, IOMD32, OMAP3, OMAP3Live, OMAP4, Tungsten - Moved ScreenModes (+FPEmulator) to just before the video drivers, so that (once the EDID changes are submitted) the first mode change will be able to use EDID-derived mode timings instead of fixed ones.
  IOMD change is somewhat non-essential due to lack of EDID reading support, but keeps things consistent with the other ROMs.
  Also moved PandoraKey to be with the other keyboard (USB) drivers.
Admin:
  Tested on BB-xM, Iyonix, Pandora, Raspberry Pi, RiscPC


Version 6.47. Tagged as 'BuildSys-6_47'

Detail:
  This is a command-line-only build, designed to operate without an
  accompanying RISC OS disc image.
  Also added the GPIO module to the ModuleDB so it can be included in
  ROM builds.


Version 6.42. Tagged as 'BuildSys-6_42'

Add RTC as an export on the Disc components (for NetTime)
Retire BASICTrans, placing alphabetically pleasing BlendTable in its slot

Version 6.35. Tagged as 'BuildSys-6_35'

Replace RTCAdjust with RTC in IOMD and Tungsten builds.
Add RTC to OMAP3 and OMAP4 builds.

Version 6.33. Tagged as 'BuildSys-6_33'

Detail:
  ModuleDB - Added BlendTable
  Components/ROOL/BCM2835, IOMD32, OMAP4, OMAP4, S3C2440, S3C6410, Tungsten - BlendTable added to all ROMs for use by SpriteExtend
  Components/ROOL/Disc - BlendTable & InverseTable added to export stage in order to allow CFSI-JPEG to build
Admin:
  OMAP3 ROM tested on BB-xM
  CFSI-JPEG tested on Iyonix


Version 6.29. Tagged as 'BuildSys-6_29'

Module did nothing, being superceded by VCHIQ.

Version 6.19. Tagged as 'BuildSys-6_19'

Detail:
  Components/ROOL/BCM2835 - Insert VCHIQ into ROM, just before BCMSound (the first module that uses it)
  Components/ROOL/Disc - Removed VCHIQ softload, it's both no longer necessary and no longer supported by the makefile
Admin:
  Tested on Raspberry Pi
  BCM2835 changes require VCHIQ-0_05, and will require relatively recent firmware at runtime


Version 6.10. Tagged as 'BuildSys-6_10'

TaskManager bravely steps into the void. This is now consistent with the defaults in Kernel-5_35-4_79_2_183.

Version 6.08. Tagged as 'BuildSys-6_08'

The only reference to NetUtils is where !InetSetup attempts to load it (silently ignoring any fail).
It also outputs this command into "Internet.Startup" but after an RMEnsure of NetFS 5.79.
Since these are ROM components files, and in every case NetFS 5.79 is present, NetUtils is redundant. !InetSetup should continue as before since it is part of the universal boot sequence and may find itself on a machine with an older NetFS.
Also - moved RTCAdjust up into alphabetical order (this handily keeps the module numbering the same for Tungsten & IOMD as a side effect).

Version 6.05. Tagged as 'BuildSys-6_05'

BootFX happened to be the module _before_ Squash, which was an ironic
choice when it came to adding support for squashed sprite files. Now
it's just _after_ Squash.

Version 6.00. Tagged as 'BuildSys-6_00'

The component name had an uppercase 'B' which, through the use of the shared TBoxMake makefile in turn became its directory name in resourcefs.
However, with non UK territory the string collation rules would not match this and the Iconbar module would die on init.
Fixes ticket #318.

Version 5.99. Tagged as 'BuildSys-5_99'

Detail:
  Components/ROOL/BCM2835 - Add SerialDeviceSupport export, as it's required by the kernel. Remove ARM module as its functionality is now implemented by the kernel.
Admin:
  Tested on Raspberry Pi with high processor vectors


Version 5.97. Tagged as 'BuildSys-5_97'

Version 5.94. Tagged as 'BuildSys-5_94'

Version 5.93. Tagged as 'BuildSys-5_93'

Version 5.91. Tagged as 'BuildSys-5_91'

Make use of it for the ROMs which include BootCommands

Version 5.90. Tagged as 'BuildSys-5_90'

Version 5.84. Tagged as 'BuildSys-5_84'

Detail:
  Components/ROOL/BCM2835 - Some unwanted changes crept into the last commit, preventing the ROM from building without a copy of my HangWatch module (and preventing it from running without switching the kernel to high processor vectors)
Admin:
  Tested with vanilla BCM2835 souce tree


Version 5.81. Tagged as 'BuildSys-5_81'

Detail:
  ModuleDB - Added BCMSound & VCHIQ definitions
  Components/ROOL/BCM2835 - Added BCMSound to ROM, and VCHIQ to header exports
Admin:
  Tested on Raspberry Pi with high processor vectors
  Note - BCMSound won't initialise on startup. First the VCHIQ module needs to be sofloaded, then BCMSound (and the other sound modules) will require re-initialisation


Version 5.80. Tagged as 'BuildSys-5_80'

Support and BCMVideo
Admin:
  (highlight level of testing that has taken place)
  (bugfix number if appropriate)


Version 5.72. Tagged as 'BuildSys-5_72'

Version 5.70. Tagged as 'BuildSys-5_70'

Detail:
  * Added EtherUSB
  * Moved SharedSnd to same location as in the OMAP3 ROM
  * Removed RPiFiles (not needed now we have filing systems)

Version 5.66. Tagged as 'BuildSys-5_66'

Version 5.65. Tagged as 'BuildSys-5_65'

Detail:
  Components/ROOL/BCM2835, OMAP3, OMAP3Live, OMAP4, S3C2440, S3C6410 - Removed listings of USB driver debug options now that all that's needed is a simple "DEBUG=TRUE". Removed obsolete RHENIUM options. Disabled building/export of unnecessary drivers.
Admin:
  OMAP3 & BCM2835 ROMs tested.
  Others untested.


Version 5.63. Tagged as 'BuildSys-5_63'

Detail:
  ModuleDB - Added DWCDriver
  Components/ROOL/BCM2835 - Added DWCDriver. Removed other USB drivers. Disabled SerKeyMouse since we shouldn't need it now USB is working.
Admin:
  Tested in BCM2835 ROM


Version 5.59. Tagged as 'BuildSys-5_59'

This isn't all that helpful for the current build because the
SD images are likely to be quite different to those for the
current OMAP builds.

Version 5.58. Tagged as 'BuildSys-5_58'

Detail:
  * Updated location of HAL now it's in CVS
  * Moved SerKeyMouse module further up the module chain so it can be used if
    ROM init breaks beyond that point
  * Marked RPiFiles as a resources-only component
Admin:
  Not tested yet

Version 5.55. Tagged as 'BuildSys-5_55'

Detail:
  New components file and additional components added to ModuleDB.
Admin:
  Changes received from Adrian Lees

Version 5.54. Tagged as 'BuildSys-5_54'

Add FrontEnd to Disc image (in the 500 directory to avoid overwriting the 26 bit only copy in 310 as found in the PlingSystem distribution).

Version 5.53. Tagged as 'BuildSys-5_53'

Detail:
  Added UnSqzAIF to IOMD32, OMAP3, OMAP3Live, OMAP4, S3C2440, S3C6410 and Tungsten ROM images, to protect against the squeeze 5.03-5.08 bug. Even though the bug hasn't been seen on all platforms, there's no harm in taking precautions against it.
  Added UnSqzAIF to PlingSystem, for 3.70+
Admin:
  New version of UnSqzAIF tested in softload form on Iyonix
  OMAP3 ROM & PlingSystem build OK, others untested


Version 5.52. Tagged as 'BuildSys-5_52'

Detail:
  ModuleDB - Added SDCreate entry
  Components/ROOL/OMAP3, OMAP3Live, OMAP4 - Install SDCreate to <Install$Dir>.ABRelease, so it can be picked up by the ABRelease component
Admin:
  Tested with building & packaging OMAP3 ROM


Version 5.45. Tagged as 'BuildSys-5_45'

Do actively report when the CMHG file is deleted in CModule.
Add PRISMLIB to the available module libraries.
Components files updated to pass USB driver switches via CDEFINES not
CFLAGS.
Tested with OMAP3 ROM build, other components files modified by eye but
not tested.

Version 5.39. Tagged as 'BuildSys-5_39'