GitLab

Version 6.84. Tagged as 'BuildSys-6_84'

And install it in the bonus binaries.

Version 6.82. Tagged as 'BuildSys-6_82'

Detail:
  OMAPHDMI added to the ModuleDB
Admin:
  Wanted by OMAP5 components file, but omitted in BuildSys-6_77.

Version 6.81. Tagged as 'BuildSys-6_81'

Add Allocate, for CTools components file.
Move !MakeModes out of the ROM modules section into the disc apps section.
Temporarily remove ATAPI from Titanium so the build completes without error.

Version 6.80. Tagged as 'BuildSys-6_80'

Detail:
  Add OMAP5 HAL, ADFS 4 and SATADriver. Put HALs back in alphabetical order.


Version 6.79. Tagged as 'BuildSys-6_79'

Detail:
  OMAP5 components, submission from Willi Theiss.
  Titanium components, submission from Elesar.
  Some extra modules in the ModuleDB.
  Added EtherCPSW AutoSense to the disc image.
Admin:
  May not build, some bits still being reviewed.

Version 6.77. Tagged as 'BuildSys-6_77'

Version 6.75. Tagged as 'BuildSys-6_75'

Detail:
Admin:
  (highlight level of testing that has taken place)
  (bugfix number if appropriate)


Version 6.73. Tagged as 'BuildSys-6_73'

Formerly buried in FontManager, sources have be split out as a separate component (& VersionNum file).

Ensure FPEmulator is aware of zero page relocation. Keep zero page relocation disabled for iMx6 for now. Add ZeroPain to ModuleDB

Detail:
  Components/ROOL/BCM2835, BCM2835Pico, OMAP3, OMAP3Live, OMAP4, S3C6410, Tungsten - Add "FPEANCHOR=High" to FPEmulator build options so that it uses the relocated FPEAnchor location instead of the old one. In the future FPEmulator will be fixed so that it doesn't use a hard-coded address, but for now we need to manually tell ROM versions where FPEAnchor is.
  Components/ROOL/iMx6 - Override the kernel's default decision and leave zero page relocation disabled. R-Comp can decide when it's a sensible time to enable it.
  ModuleDB - Add ZeroPain. The module isn't used in any components files yet, but it's good to list it here forthe sake of completeness.
Admin:
  Tested with Iyonix ROM build
  Requires Kernel-5_35-4_79_2_268 for FPEAnchor setting to match reality


Version 6.69. Tagged as 'BuildSys-6_69'

Version 6.65. Tagged as 'BuildSys-6_65'

Tweak to the ModuleDB to allow builds (e.g. CTools) to include some more of the common librabries in their install phase. The ones I've added are (almost) all required by shared makefiles - e.g. for debug app builds.

Also a minor fix to CModule shared makefile to cope with certain arrangements
of source files in a component.

Version 6.57. Tagged as 'BuildSys-6_57'

Detail:
Admin:
JWB

Version 6.56. Tagged as 'BuildSys-6_56'

Detail:
Admin:
jwb


Version 6.55. Tagged as 'BuildSys-6_55'

Corrected some DDE-related bits from the previous commit. Won't affect anyone other than CTools builds.

Version 6.54. Tagged as 'BuildSys-6_54'

Components (ROOL CTools):
  * Added new components (ITable, BlendTable, RTC) for exports
  * Switch to using Install: rather than <Install$Dir> to help CLX
  * Replace CToolsCD component with DDE component
ModuleDB tweaks:
  * Added the (closed source) DDE resources component
  * Added a component for BuildSys itself (so DDE can get the Makefiles)
Shared makefile tweadded ERASECVS to the standard tools
  * Added a verbose copy flags CPVFLAGS for big copy operations
  * Added "install" rule for debug app builds (amu install INSTTYPE=debug)

Version 6.53. Tagged as 'BuildSys-6_53'

Retagged as BuildSys-6_44.

Hopper, PsychoEffects, QTheMusic added to module database.

Version 6.44. Tagged as 'BuildSys-6_44'

Removed obsolete comment about 3 utilities build with Aasm, they don't, they use objasm.
Not tagged.

Version 6.43. Tagged as 'BuildSys-6_43'

Detail:
  This is a command-line-only build, designed to operate without an
  accompanying RISC OS disc image.
  Also added the GPIO module to the ModuleDB so it can be included in
  ROM builds.


Version 6.42. Tagged as 'BuildSys-6_42'

Detail:
  corrected references from EtherET to EtherTH in moduleDB and Components files

Admin:
  (highlight level of testing that has taken place)
  (bugfix number if appropriate)


Version 6.40. Tagged as 'BuildSys-6_40'

Detail:
  3 specific lines added into ModuleDB reflecting items in (currently) private branch
  iMx6 components file added
Admin:
  J Ballance initial


Version 6.39. Tagged as 'BuildSys-6_39'

Special thanks to the estate of Neil Raine for permission to publish the Meteors sources.
Added to disc components.

Version 6.38. Tagged as 'BuildSys-6_38'

Version 6.37. Tagged as 'BuildSys-6_37'

Detail:
  ModuleDB - Changed VFPSupport to a C module located in the mixed folder; required for VFPSupport-0_06
  Components/ROOL/CTools - Add VFPSupport export; required for building Debugger-1_86
Admin:
  Tested with Raspberry Pi & OMAP3 ROMs


Version 6.36. Tagged as 'BuildSys-6_36'

Detail:
  ModuleDB - The Debugger module is now classified C, not assembler, to allow us to safely start using some C code within it
Admin:
  Required for Debugger-1_85


Version 6.34. Tagged as 'BuildSys-6_34'

Replace RTCAdjust with RTC in IOMD and Tungsten builds.
Add RTC to OMAP3 and OMAP4 builds.

Version 6.33. Tagged as 'BuildSys-6_33'

Detail:
  ModuleDB - Added BlendTable
  Components/ROOL/BCM2835, IOMD32, OMAP4, OMAP4, S3C2440, S3C6410, Tungsten - BlendTable added to all ROMs for use by SpriteExtend
  Components/ROOL/Disc - BlendTable & InverseTable added to export stage in order to allow CFSI-JPEG to build
Admin:
  OMAP3 ROM tested on BB-xM
  CFSI-JPEG tested on Iyonix


Version 6.29. Tagged as 'BuildSys-6_29'

Version 6.27. Tagged as 'BuildSys-6_27'

Version 6.25. Tagged as 'BuildSys-6_25'

Version 6.24. Tagged as 'BuildSys-6_24'

Detail:
  Makefiles/GCCRules - Makefile containing rules for building tools with GCC 4. These rules are intended to replace the rules in StdRules for when GCC is in use.
  ModuleDB - Added libgnu4
  Components/ROOL/BuildHost - Build libgnu4 instead of libgnu
Admin:
  Building BuildHost now requires a GCC4-based setup (Env-1_25, Modules-0_26, Library-1_63, etc.)


Version 6.23. Tagged as 'BuildSys-6_23'

* Include in disc image (needed by InetSetup when TCP/IP is enabled)
* Remove portable from the IOMD module listing (demoted to export only)

Version 6.11. Tagged as 'BuildSys-6_11'

Detail:
  ModuleDB - Added BatMgrHAL. Point BatMgr at released souces instead of private ones.
  Components/ROOL/OMAP3, Components/ROOL/OMAP3Live - Added BatMgrHAL to ROM
Admin:
  Tested on BB-xM, Pandora, TouchBook


Version 6.04. Tagged as 'BuildSys-6_04'

The component name had an uppercase 'B' which, through the use of the shared TBoxMake makefile in turn became its directory name in resourcefs.
However, with non UK territory the string collation rules would not match this and the Iconbar module would die on init.
Fixes ticket #318.

Version 5.99. Tagged as 'BuildSys-5_99'

Detail:
  ModuleDB - Added PandoraKey entry
  Components/ROOL/OMAP3, Components/ROOL/OMAP3Live - Added PandoraKey to ROM. Currently at the end of the module chain since it seemed a bit uncooperative when I placed it further near the start
Admin:
  Tested on Pandora, rev C2 BB, rev A2 BB-xM, rev C1 TouchBook


Version 5.98. Tagged as 'BuildSys-5_98'

* Added !Madness to ModuleDB
* Added !Madness to disc diversions
* Relocated ArmBE into Library since BASIC has never bothered RMEnsuring it, so EDIT only works if it's on the run path (or had previously been manually loaded)

Version 5.95. Tagged as 'BuildSys-5_95'

* Added to disc image
* Added Raspberry UserIF to !ThemeDefs

Version 5.92. Tagged as 'BuildSys-5_92'

Version 5.91. Tagged as 'BuildSys-5_91'