GitLab

Special thanks to the estate of Neil Raine for permission to publish the Meteors sources.
Added to disc components.

Version 6.38. Tagged as 'BuildSys-6_38'

Version 6.37. Tagged as 'BuildSys-6_37'

Detail:
  ModuleDB - Changed VFPSupport to a C module located in the mixed folder; required for VFPSupport-0_06
  Components/ROOL/CTools - Add VFPSupport export; required for building Debugger-1_86
Admin:
  Tested with Raspberry Pi & OMAP3 ROMs


Version 6.36. Tagged as 'BuildSys-6_36'

Detail:
  ModuleDB - The Debugger module is now classified C, not assembler, to allow us to safely start using some C code within it
Admin:
  Required for Debugger-1_85


Version 6.34. Tagged as 'BuildSys-6_34'

Replace RTCAdjust with RTC in IOMD and Tungsten builds.
Add RTC to OMAP3 and OMAP4 builds.

Version 6.33. Tagged as 'BuildSys-6_33'

Detail:
  ModuleDB - Added BlendTable
  Components/ROOL/BCM2835, IOMD32, OMAP4, OMAP4, S3C2440, S3C6410, Tungsten - BlendTable added to all ROMs for use by SpriteExtend
  Components/ROOL/Disc - BlendTable & InverseTable added to export stage in order to allow CFSI-JPEG to build
Admin:
  OMAP3 ROM tested on BB-xM
  CFSI-JPEG tested on Iyonix


Version 6.29. Tagged as 'BuildSys-6_29'

Version 6.27. Tagged as 'BuildSys-6_27'

Version 6.25. Tagged as 'BuildSys-6_25'

Version 6.24. Tagged as 'BuildSys-6_24'

Detail:
  Makefiles/GCCRules - Makefile containing rules for building tools with GCC 4. These rules are intended to replace the rules in StdRules for when GCC is in use.
  ModuleDB - Added libgnu4
  Components/ROOL/BuildHost - Build libgnu4 instead of libgnu
Admin:
  Building BuildHost now requires a GCC4-based setup (Env-1_25, Modules-0_26, Library-1_63, etc.)


Version 6.23. Tagged as 'BuildSys-6_23'

* Include in disc image (needed by InetSetup when TCP/IP is enabled)
* Remove portable from the IOMD module listing (demoted to export only)

Version 6.11. Tagged as 'BuildSys-6_11'

Detail:
  ModuleDB - Added BatMgrHAL. Point BatMgr at released souces instead of private ones.
  Components/ROOL/OMAP3, Components/ROOL/OMAP3Live - Added BatMgrHAL to ROM
Admin:
  Tested on BB-xM, Pandora, TouchBook


Version 6.04. Tagged as 'BuildSys-6_04'

The component name had an uppercase 'B' which, through the use of the shared TBoxMake makefile in turn became its directory name in resourcefs.
However, with non UK territory the string collation rules would not match this and the Iconbar module would die on init.
Fixes ticket #318.

Version 5.99. Tagged as 'BuildSys-5_99'

Detail:
  ModuleDB - Added PandoraKey entry
  Components/ROOL/OMAP3, Components/ROOL/OMAP3Live - Added PandoraKey to ROM. Currently at the end of the module chain since it seemed a bit uncooperative when I placed it further near the start
Admin:
  Tested on Pandora, rev C2 BB, rev A2 BB-xM, rev C1 TouchBook


Version 5.98. Tagged as 'BuildSys-5_98'

* Added !Madness to ModuleDB
* Added !Madness to disc diversions
* Relocated ArmBE into Library since BASIC has never bothered RMEnsuring it, so EDIT only works if it's on the run path (or had previously been manually loaded)

Version 5.95. Tagged as 'BuildSys-5_95'

* Added to disc image
* Added Raspberry UserIF to !ThemeDefs

Version 5.92. Tagged as 'BuildSys-5_92'

Version 5.91. Tagged as 'BuildSys-5_91'

Modify makefile fragments to generate GPA & symbol files when building ROM modules. Add HangWatch to ModuleDB.

Detail:
  Makefiles/AAsmModule, Makefiles/CModule - Modified to generate GPA (for assembler) and symbols (for C) files when building ROM modules. These files are copied into the install folder, allowing them to easily be picked up by debugging tools.
  ModuleDB - Added entry for HangWatch module
Admin:
  Makefile changes tested with BCM2835, OMAP3, and Disc builds


Version 5.87. Tagged as 'BuildSys-5_87'

Version 5.85. Tagged as 'BuildSys-5_85'

Detail:
  ModuleDB - Added BCMSound & VCHIQ definitions
  Components/ROOL/BCM2835 - Added BCMSound to ROM, and VCHIQ to header exports
Admin:
  Tested on Raspberry Pi with high processor vectors
  Note - BCMSound won't initialise on startup. First the VCHIQ module needs to be sofloaded, then BCMSound (and the other sound modules) will require re-initialisation


Version 5.80. Tagged as 'BuildSys-5_80'

Mirrors variables used in CModule. Note ${EXPORT} has changed to $CUSTOMEXP}, but nothing seemed to be using the former anyway.
ThemeDefs added to module database.
Replace useof ResApp with ThemeDefs in the disc image.


Version 5.77. Tagged as 'BuildSys-5_77'

Admin:  If ROM modules use the CModule make file they MUST be set as type C, even
        if they are purely assembler in coding


Version 5.73. Tagged as 'BuildSys-5_73'

Support and BCMVideo
Admin:
  (highlight level of testing that has taken place)
  (bugfix number if appropriate)


Version 5.72. Tagged as 'BuildSys-5_72'

Version 5.71. Tagged as 'BuildSys-5_71'

Version 5.69. Tagged as 'BuildSys-5_69'

Version 5.67. Tagged as 'BuildSys-5_67'

Version 5.64. Tagged as 'BuildSys-5_64'

Detail:
  ModuleDB - Added DWCDriver
  Components/ROOL/BCM2835 - Added DWCDriver. Removed other USB drivers. Disabled SerKeyMouse since we shouldn't need it now USB is working.
Admin:
  Tested in BCM2835 ROM


Version 5.59. Tagged as 'BuildSys-5_59'

EtherUSB added to components files for OMAP3.

Version 5.56. Tagged as 'BuildSys-5_56'

Detail:
  * Updated location of HAL now it's in CVS
  * Moved SerKeyMouse module further up the module chain so it can be used if
    ROM init breaks beyond that point
  * Marked RPiFiles as a resources-only component
Admin:
  Not tested yet

Version 5.55. Tagged as 'BuildSys-5_55'

Detail:
  New components file and additional components added to ModuleDB.
Admin:
  Changes received from Adrian Lees

Version 5.54. Tagged as 'BuildSys-5_54'

Detail:
  ModuleDB - Added SDCreate entry
  Components/ROOL/OMAP3, OMAP3Live, OMAP4 - Install SDCreate to <Install$Dir>.ABRelease, so it can be picked up by the ABRelease component
Admin:
  Tested with building & packaging OMAP3 ROM


Version 5.45. Tagged as 'BuildSys-5_45'

Detail:
  ModuleDB - Added ZLibMod (module that provides ZLib_* SWIs), zlibmodlib (fake zlib library that just calls ZLib_* SWIs) and rompress (ROM compression tool)
Admin:
  New components aren't fully ready for use yet


Version 5.41. Tagged as 'BuildSys-5_41'

Requires Env 1.15

Version 5.31. Tagged as 'BuildSys-5_31'

Version 5.28. Tagged as 'BuildSys-5_28'

Version 5.27. Tagged as 'BuildSys-5_27'

Detail:
  ModuleDB - Added entry for CDFSSoftSCSI
  Components/ROOL/OMAP3, Components/ROOL/OMAP4 - Added CDFSSoftSCSI to the OMAP ROM builds
  Components/ROOL/OMAP3 - Disable OMAPVideo debug output since it's no longer needed to try and help track down the black screen on boot issue
Admin:
  Tested in OMAP3 ROM build


Version 5.24. Tagged as 'BuildSys-5_24'

Version 5.23. Tagged as 'BuildSys-5_23'

Version 5.22. Tagged as 'BuildSys-5_22'

Admin:
  Submission from Willi Theiß

Version 5.20. Tagged as 'BuildSys-5_20'