GitLab

No code change - not tagged.

2000 lines of unloved code from 1993 deleted, binary still the same afterwards, so should be same as 1.25.

Version 1.26. Tagged as 'SprExtend-1_26'

1 pixel wide JPEGs:
The diffuse dithering code considers all lines as 1-N-1 where N can be zero and the first and last pixel are dealt with specially because there's no data to scatter beyond the edge.
With a 1 pixel wide JPEG the dithering code ended up with a -ve number in the X counter and wandered off the end of memory. Fix just moves a SUB up a few lines and turns it into a SUBS so that the 1 wide case becomes 0-N-1 with N=0.
1 pixel high sprites:
With output switched to a 1 pixel high sprite an abort would quickly follow because the read of mode variables had a backdoor check to workaround a bug in RISC OS 2.00 which returned a duff value for YWindLimit in MODE 22. As the definition of MODE 22 got changed to 768x288 in RISC OS 3.xx (and the YWindLimit bug fixed) this code now just falsely reported a 1 pixel high sprite as being 1024 high and the blitter splattered all over memory it shouldn't.
Result:
Loss of RISC OS 2.00 compatibility, but can now load J...

Trim 200+ lines of changes dating back to 1987, combine with non duplicates in the 'BlackLog'.
Use 'offsetof' macro in genjhdr to avoid warnings about uninitialised variables, rename from makejhdr so all the utils are clearly demarked.
Add throwback to MkCFSI-j.
Replace reason codes passed to SWIs with textual equivalents from the respective header files.
Speed up SWI despatch a bit by making the first few debug instructions depend on 'debuggs'.
Qualify all of the debug switches with the global 'debug' one.
Eliminate single use of 'pullx' macro.
Make do_branch() take an unsigned opcode so 50% of the branches don't result in implied cast warnings.
Added an UNUSED() macro to reduce a few of the legitimate warnings (the remainder are either in the original JPEG code or ones that it is worth checking the logic of.
Unixify one last filename.

Version 1.24. Tagged as 'SprExtend-1_24'

Sources/PutScaled:
 Sync comment with C code.
Sources/SprExtend:
 Debug switch 'debuggs' had been left on, which left in some unnecessary code, but turning it off pulled in code with a stack imbalance. Now off.
 Ensured a terminator at the end of the RMEnsure.
 Colour translation tables passed to SetPointerShape that were in top bit set addresses were being interpreted as though no tt was supplied. Now tested against zero to match docs.
Sources/SprTrans:
 Switches pre 0.60 collapsed.
Sources/diffuse:
 The C code was corrupting r12 workspace pointer so the check of the flag 'ctrans_recent' sometimes failed leading to a duff table lookup.
 Small optimisation to checking of guard word.
c/PutScaled:
 Change paths to be Unix friendly.
rojpeg:
 Put assembler_panic in the header file to shut the compiler up.
3x unused files deleted.

Version 1.23. Tagged as 'SprExtend-1_23'

Removed braces selecting code from 0.47 0.50 and 0.55, this is over 80
versions ago and just confusing.
Binary the same, not tagged.

Detail:
  Defines UXTH and SXTH as macros. This means we can assemble the output of
  cc -S -cpu 6 even using current versions of objasm that are limited to the
  v5TEJ instruction set. It is expected that objasm will ignore these macros
  if/when it gains v6 instruction set support.
Admin:
  Tested - it works.

Detail:
  Uses suffixed file extensions for compatiblity with both objasm and asasm.
Admin:
  Supplied by Peter Naulls, tested at ROOL

Version 1.20. Not tagged

Detail:
  The use of ARMv4 SMULL instructions is now switched based upon the
  Hdr:CPU.Arch header file. This means that in IOMD ROM builds, only pre-v4
  instructions are used, so it will function on all required target platforms.
  Tungsten and OMAP3 builds will continue to use SMULL.
Admin:
  Inspected binary to ensure correct behaviour. Requires HdrSrc 1.67 or
  1.62/4.162.2.4.

Version 1.20. Tagged as 'SprExtend-1_20'

Removed local definition of XOS_CLI and XColourTrans_SelectTable, replaced
with header file.

Delete swiv2_old (moved to _old directory)

Changed to use {TRUE} and {FALSE} built in objasm variables.

Label dividebyzero fall through had code in the way for debug = {TRUE}.

Trimmed some dead code and definitions.

Stopped thrashing OS_CLI every time a JPEG plot is required to check
ColourTrans version, this is now done once at startup and a flag kept
instead.

Author: Rob Sprowson

Version 1.19. Tagged as 'SprExtend-1_19'

Detail:
  cache_sprite_doesnt_exist_error routine in MsgCode failed to take into
  account the fact that the messages file might be tokenised. Calling
  MessageTrans_Lookup with R2=0 gives you the length of the unexpanded
  message in R3. Now fixed to work in a better way.
  Also rename fp to r11 in swiv2 file to avoid assembler warnings.
Admin:
  Soft-loaded module tested. Problem seems to be solved.


Version 1.17. Tagged as 'SprExtend-1_17'

C compiler that spots signed divisions of known-positive quantities (eg in
this case (<char>*254)/100), and does them as unsigned instead.

Version 1.16. Tagged as 'SprExtend-1_16'

* Transformed sprite plotting optimised to not read the screen memory when
  it could be simply avoided - greatly enhances performance on Iyonix.
* Decoding of 1x2 sampled JPEGs fixed.

Version 1.14. Tagged as 'SprExtend-1_14'

Replaced a couple of STMs in error recovery code with code sequences that don't use UNPREDICTABLE (and XScale-unsafe) instructions.

Version 1.13. Tagged as 'SprExtend-1_13'

New version from Kevin: OS_SpriteOp 55 and 56 can take top-bit-set translation table pointers, at the expense of the condition for no translation table being tightened to either 0 or -1 (previously documented as <= 0). This is the version included in release 5.00 of the OS.

Version 1.12. Tagged as 'SprExtend-1_12'

Used to interpret negative translation table pointers as "none"; now just 0
as per documentation.
Plotting 16bpp sprites into 32bpp modes now correctly sets the 3 least
significant bits of each channel - used to be set to 0 due to a typo.
Build option (currently set to on) to use SMULL instructions.

Version 1.11. Tagged as 'SprExtend-1_11'

Detail:
  The build structure for this module is not nice - I've sanitised it a
    bit, but it's still not nice.
Admin:
   Built and tested with the test program briefly - the test sprite seems
     to scale and rotate properly.  ChangeFSI not tested.


Version 1.08. Tagged as 'SprExtend-1_08'

  Addition of srccommit files.
Detail:
  * c.jrdjfif, get_dqt had an empty debug loop when debug was disabled.
    This is no longer compiled when debugging is not enabled.
  * VersionNum and VersionASM files added, and Sources.SprExtend modified
    to use symbols exported from there rather than from Version.
Admin:
  Ran on my machine. Previously tested in ROL builds.
  In future, might like to merge Exif support from ROL builds, but don't
  want to do that until I've re-read the specs on Exif format again.

Version 1.07. Tagged as 'SprExtend-1_07'

Sprout from master 1996-11-21 12:57:15 UTC Neil Turton <nturton@gitlab.riscosopen.org> 'Initial revision'
Delete:
    Doc/SA_Changes
    Log426
    Sources/swiv2_old

Sprout from master 1996-11-05 09:45:28 UTC Neil Turton <nturton@gitlab.riscosopen.org> 'Import from cleaned 360 CD'
Delete:
    Log426
    Sources/swiv