GitLab

Detail:
  Boot.s - Make FIQDebug work again
  Boot.s - Add support for DMA & video devices
  Interrupts.s, hdr/omap3530 - Add 'ExtraDebugInterrupts' option
  hdr/SDMA, SDMA.s, Makefile - DMA code which presents itself to RISC OS as a set of single-buffered, interrupt-driven DMA channels.
  hdr/StaticWS - Add extra DMA, video & debug entries to workspace
  Interrupts.s - Add 'DebugDisablePrevious' debug option for more flexibility in tracking down noncleared IRQs with ExtraDebugInterrupts
  RAM.s - Use DMA to clear RAM on boot. RAM clear now takes less than 1 second on a rev C board, whereas before it used to take several.
  Video.s - Add simple HAL device to expose information needed by upcoming RISC OS module based video driver.
Admin:
  Tested on rev C2 beagleboard.


Version 0.16. Tagged as 'OMAP3-0_16'

Detail:
  Makefile - Enable compilation of s.video
  hdr/StaticWS - New workspace entries for video support
  hdr/Video - Typo fix, VENC registers
  s/Boot - Change initialisation order for video support
  s/Debug - Added DebugMemDump routine
  s/RAM - Added code to verify RAM config, to avoid crash if a board looks like a revision C but doesn't have the extra RAM
  s/Stubs - Disable stub video functions
  s/Video - Working video code, beginnings of TV-out code
Admin:
  Tested on rev C2 beagleboard. Video code may only function correctly if kernel is loaded via u-boot.


Version 0.06. Tagged as 'OMAP3-0_06'

Detail:
  s/RAM - Added v4 to register list in RAM clear routines to ensure correct amount of RAM is cleared
Admin:
  Tested on Rev C2 beagleboard


Version 0.05. Tagged as 'OMAP3-0_05'

Detail:
  s/Boot - Fixes for rev C beagleboard. Added GPIO code.
  s/Debug - DebugHALPrint, DebugHALPrintReg routines
  s/PRCM - PRCM_GetFreqSel added
  s/RAM - Fixes for rev C beagleboard. Sped up RAM clear by using more regs.
  s/Top - Fixes for rev C beagleboard
  s/Video - Video code potentially complete, but full of bugs and so still disabled.
  hdr/GPIO - Added GPIO registers
  hdr/omap3530 - Fixes for rev C beagleboard, GPIO, debug macros, QEMU support for new video code
  hdr/SDRC - Typo fix
  hdr/StaticWS - GPIO, pixel rate entries added
  hdr/Video - DSI PLL registers added
Admin:
  Tested on rev C beagleboard.


Version 0.04. Tagged as 'OMAP3-0_04'

Detail:
  Performs startup procedure suitable for any location in ROM or RAM. UART, timer, counter, interrupt & debug functionality implemented. Video support incomplete and nonfunctional.
Admin:
  Tested with HALTester & RISC OS kernel under qemu-omap3


Version 0.01. Tagged as 'OMAP3-0_01'