Commit 51936e95 authored by Jeffrey Lee's avatar Jeffrey Lee
Browse files

Re-enable Pandora TV-out support

Detail:
  s/board - Re-enable Pandora TV-out support now that we have the ability to turn TV-out power on/off
  hdr/board, s/Video - Add the new TV-out power control function to the video board config struct. All OMAP boards should be able to use the same implementation, which enables/disables the VDAC power supply in the TPS
Admin:
  Tested on BB-xM and Pandora
  TV detection (and TV-out in general) now works properly on the Pandora


Version 0.94. Tagged as 'OMAP3-0_94'
parent e021688c
/* (0.93)
/* (0.94)
*
* This file is automatically maintained by srccommit, do not edit manually.
* Last processed by srccommit version: 1.1.
*
*/
#define Module_MajorVersion_CMHG 0.93
#define Module_MajorVersion_CMHG 0.94
#define Module_MinorVersion_CMHG
#define Module_Date_CMHG 17 Dec 2013
#define Module_MajorVersion "0.93"
#define Module_Version 93
#define Module_MajorVersion "0.94"
#define Module_Version 94
#define Module_MinorVersion ""
#define Module_Date "17 Dec 2013"
......@@ -18,6 +18,6 @@
#define Module_ComponentName "OMAP3"
#define Module_ComponentPath "castle/RiscOS/Sources/HAL/OMAP3"
#define Module_FullVersion "0.93"
#define Module_HelpVersion "0.93 (17 Dec 2013)"
#define Module_LibraryVersionInfo "0:93"
#define Module_FullVersion "0.94"
#define Module_HelpVersion "0.94 (17 Dec 2013)"
#define Module_LibraryVersionInfo "0:94"
......@@ -126,6 +126,7 @@ VideoBoardConfig_Num_LCDs # 1 ; Number of LCD outputs available
VideoBoardConfig_MySize # 2 ; sizeof(VideoBoardConfig), or 0 for old HAL
VideoBoardConfig_LCD_Configs # 4 ; Pointer to list of LCD configs
VideoBoardConfig_TVDet_Func # 4 ; Function to poll TV detection signal
VideoBoardConfig_TVPower_Func # 4 ; Function to control TV out power. R0=hal device, R1=on/off flag
VideoBoardConfig_Size # 0
VideoBoardConfig_Flags_SVideo * 1
......
......@@ -45,6 +45,7 @@
IMPORT GPIOx_SetAsOutput
IMPORT GPIOx_SetOutput
IMPORT HAL_CounterDelay
IMPORT TPSWrite
Video_Init
; Configure GPIO pins so we can turn the DVI framer on/off
......@@ -90,6 +91,8 @@ VideoDevice_Init
STR a2, [a3, #VideoBoardConfig_LCD_Configs]
ADR a2, Video_TVDet_Func
STR a2, [a3, #VideoBoardConfig_TVDet_Func]
ADR a2, Video_TVPower_Func
STR a2, [a3, #VideoBoardConfig_TVPower_Func]
MOV a1, #0
MOV a2, v1
CallOS OS_AddDevice
......@@ -226,6 +229,29 @@ Video_TVDet_Func
GPIO_GetInput a1, a1, a2
EXIT
Video_TVPower_Func
Entry "v1-v2,sb", 4
LDR sb, VideoWorkspace
LDR v1, OSentries+4*OS_IICOpV
MOVS ip, a2
MOV a3, #1
MOV a2, sp
BEQ %FT50
; Configure VDAC for 1.8V output
MOV a1, #&4b*2
MOV ip, #3
MOV a4, #&99 ; VDAC_DEDICATED
STR ip, [a2]
BL TPSWrite
; Enable it
MOV ip, #&20
50 ; Arrive here with ip=0 when disabling
MOV a1, #&4b*2
MOV a4, #&96 ; VDAC_DEV_GRP
STR ip, [a2]
BL TPSWrite
EXIT
Video_SetPandoraGamma ROUT
Entry "v1-v4"
ADR a1, PandoraGamma
......
......@@ -136,7 +136,7 @@ BoardConfigTable
BOARDCFG "BeagleBoard", BeagleBoard, L4_UART3, "123", 3, "123", 3, 2, &16, 170, 147, M_HSO+M_AI, VBC_SV, 1, VBC_DVI
BOARDCFG "DevKit8000", DevKit8000, L4_UART3, "123", 3, "132", 3, 2, &16, GPIO_PIN_MAX+7, 147, M_HSO+M_AI, VBC_SV, 1, VBC_DVI ; TODO - If USB host is completely broken, we should hide it from RO
BOARDCFG "IGEPv2", IGEPv2, L4_UART3, "123", 3, "123", 3, 2, &16, 170, 24, M_HSO+M_AI, 0, 1, VBC_DVI
BOARDCFG "Pandora", Pandora, L4_UART3, "123", 3, "123", 3, 255, &16, 255, 16, M_HSO+M_AI+M_PD, 0, 1, VBC_Pandora
BOARDCFG "Pandora", Pandora, L4_UART3, "123", 3, "123", 3, 255, &16, 255, 16, M_HSO+M_AI+M_PD, VBC_Both, 1, VBC_Pandora
BOARDCFG "Touch Book", TouchBook, L4_UART3, "123", 3, "123", 3, 255, &16, 176, 147, M_HSO+M_AI+M_HF, 0, 1, VBC_TouchBook
BOARDCFG "OMAP3 EVM", OMAP35xEVM, L4_UART1, "123", 1, "123", 3, 255, &16, GPIO_PIN_MAX+7, 21, M_HSO+M_AI, VBC_Both, 1, VBC_DVI
BoardConfigTable_End
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment