GitLab

WindowManager 3.98. Sets URI handler environment variables for
http, ftp and gopher.

Fixed 'doesn't reformat for unsized images' bug - only happens when the
deferred reformatter is enabled, hadn't remembered to check this in my
debug build where this is turned off. Oops.

Caret position in forms could get left behind despite attempts to rectify
this in v1.31 - now fixed (and faster, fortunately).

Hourglass + percentage displayed for History and Image History when
loading - it can take a while for very big histories, though in
practice you only see the visit history loading (has to do a lot
more work, and is thus quite a bit slower than the image history).

POST forms worked when targetted to frames, but were broken when
not targetted! (Forms data inherited from one browser to the same
browser; ended up freeing the flex block...). Fixed.

Now support 303 response code (redirect to GET). Treated as 301, i.e.
not support if STRICT_PARSER is defined, otherwise drops through to
the 302 handling code.

Pointer shouldn't get stuck in odd shapes when going to a new page now;
it gets reset to a standard shape every time the null handler that
checks the position is called, though (whether or not the handler thinks
the pointer is over a different token, if that token is NULL, it sets
the standard shape). A possible work around would be for a browser to
remember the pointer shape too; that's for the future, though.

Early stage table formatting functions could blow themselves apart if
tables_count_table decided there were no rows, columns or both. A
net table size of zero cells is now dealt with; slow, partial table
fetches in multiple windows with image loading turned on will now
*hopefully* be stable, where v1.31 would have bombed out repeatedly.

A nested frameset within one document will now inherit the border
width (frame spacing) and border colour of its parent. This is done
by copying the maxlen and indent fields of the parent token over
the child, and note it's done in the browser (fetch_preprocess_token),
not HTMLLib.

Border colour on a FRAMESET now used, with the first colour on any
FRAME within it overriding, as in NN 4 and MSIE 4.

<LI> bullets really do stick to the text next to them now (I'd done
that in an experimental piece of code and forgotten to merge it back
before the last check-in).

Browse$HotlistURL/URIFile and Browse$HomeURL/URIFile now work from
_TaskName in the Messages file, and are thus of the generic form
<App>$HotlistURL etc. - Docs.Notes and Docs.User updated appropriately.

Event 0x11d00 through to 0x11d7f will make the browser look up Controls
file entries 'JumpTo00' through to 'JumpTo7f' and read a URL from them.
This will be fetched in the ancestor window of the source of the event,
or a new window if such an ancestor can't be found [for Daytona demo].

NB: Nasty frames-related crash at http://www.teledanmark.dk/menu/start.htm
is *not* fixed in this source. NOBR is not supported.

Check for WindowManager 3.97 and ensure Unicode$Path is set in all !Run[D] files, don't set the Alias$@PrintType_FF4 variable, and updated

Customer build ROM obey file variants. Various other changes to
the Run files for new module versions, updated paths to support
new positions of choices, hotlist and histories (see later), etc.

!Sprites[22] files hold small !app icons for some variants, and
an ic_browse sprite. Some variants now have a Sprites and Sprites22
file instead of just Sprites, with the former containing various
mode 12 or 15 specific sprites.

Text files dragged to the URL writable are treated as ANT URL files. This
relies on URLBarWrit (Toolbars.h) being a unique ID, which it should be,
but beware of the Hotlist and Choices numberspaces...

INPUT TYPE=BUTTON supported. Form items without a FORM tag are now shown
(as MSIE 4, but not NN 4).

'*', '-', '@', '_' and '.' are not escaped when submitting forms now. The
Web interface to the IMDb now works.

INPUT TYPE=HIDDEN items will not affect the line height anymore - so
http://www.hotmail.com/ now has correctly aligned writable icons, for
example. Similarly, TAG_FORM and TAG_FORM_END items could push up
line height and don't anymore.

HRs with a specified pixel width will now influence the size of a table
cell (they didn't before).

BRs now checked by tagno field when the browser needs to know something
was an actual BR tag rather than just a line break signal, and by the
style bit entry when only the indication of a line break is required.

Table widths of 0 or 0% are ignored.

Trace.c updated to report height and background fields in a table_stream.

fm_putsl() writes a terminator into the string; the Forms.c routines were
calling this for displaying INPUT TYPE=PASSWORD fields using the FE_PassCode
literal string (a line of stars). This write into a read only data area
would make the debugger fault the access. A local char array is now used
instead, to get round this (note the use of var[]=literal rather than
var[sizeof(literal)]; strcpy(var, literal) due to some weird compiler bug
that copies the wrong thing into 'var' under some (undefined...)
circumstances).

Text areas don't scroll back to the top line when clicked in anymore;
single line writables don't scroll back to the left either. When
reentering a text area from 'above', the caret appears at the top line
rather than 'somewhere further down'...

ARROWS_MOVE_OUT compile time option at the top of Forms.c defines whether
you must press Tab/Shift+Tab to move between writable fields in forms or
if up/down will drop out of them, though if keyboard control is on this
is enforced (or you get trapped inside the form!).

urlutils_filetype_from_url now uses MimeMap module.

If fetcher is told a page is text, it'll check for a filename extension and
may choose to use this instead (e.g. it may find it's HTML instead). This
is to try and get around duff servers... (e.g. http://www.batalarms.co.uk/).

Save dialogues shouldn't flicker when options that don't change the
filetype are selected (before, the draggable sprite was always reset for
each selection). Noticed the erroneous setting of a static variable in
SaveFile.c by a call to this by SaveObject.c, and so added a flag to
savefile_set_filetype to deal with this - would have been possible to get
the wrong filetype sent to applications or at best the wrong filetype
sprite in the dialogue without that.

The caret shouldn't jump out of a form back to the URL writable if the page
reformats now.

Table background colours now supported (as in the colour you see in the
border space if the cellspacing is large enough; this is as in MSIE, not
as in Navigator). Drawfile output routines updated accordingly.

Corrected erroneous use of wimpt_dx() / wimpt_dy() in a couple of places
in Images.c, which meant that (say) 1x1 images didn't work correctly in
medium resolution display modes.

Now have support for save as text (component ID and event 0x12) and save
as Draw (component ID and event 0x13) buttons. Dubious conditions for
greying and ungreying the print, save source and view source buttons and
menu options sorted out as part of implementing the same for the two new
buttons; added greying out of their associated menu items in passing.

Turned kerning on in draw file objects (does mean a rather heinous
increase in file size, but this is the only way to ensure the draw file
matches the visible page).

Comments before functions in SaveDraw.c are now complete and up to date.

Image and visit histories now generate a crude hash number to speed up
searching for items. It does give a speed increase, though it's a
disappointingly small one.

Issue of left/right margins and cellpaddings sorted out. Now have
redraw_left/right_margin for finding out the basic gap you must leave.
redraw_left/right_gap then gives any extra indentation for LI, BLOCKQUOTE
or whatever. The last two can be subtracted from the display width to
get an available page width for any section of text. Note that
redraw_left_gap replaces redraw_margin. The redraw_start_x function
uses the above to work out where a line's left hand edge should be,
taking account of left/right/centre alignment. HRs have been fixed now
(they were quite broken in v1.30, I think) based on this new model and
the behaviour of MSIE/NN 4.

Fixed width of cells with no contents - cell padding values wouldn't
have worked properly as the reformatter returns 0 rather than the left
hand margin size if given no stream.

Removed FM_Absolute flags for Font_Paint (spotted by DBrown) - sets bit
2, which is reserved...?

IMG width and height in % terms now works correctly; a % of available
width (after margins and indents) or height on the main page or for
a table cell, if the image lies in one. Because of the chicken-and-egg
problem with the latter, the cell must specify a width and/or height
for things to work properly. If this is not done, you'll usually end
up with a 1:1 scaled image (as in Navigator 4, rather than ending up
with no image or even no cell (!), as in MSIE 4).

HEIGHT attribute on a TABLE tag is supported, but only in a crude
fashion; the extra height (if there is any) is distributed over the
rows in a linear fashion. This is probably all you have to do in
practice, but I haven't checked. To maintain a notion of min/max
height as well as width would of course require a great deal more
work...

If using client pull to reload a page with a fragment ('...#name')
specified, then the reload wouldn't work on the same page; it'd just
jump to the fragment position. This won't happen if b->reloading is
set now (so works in conjunction with client pull on the same page
forcing a non-cached fetch). Similarly, if POSTing to such a URL,
a fetch will proceed (both these fixes done originally for
http://jupiter.beseen.com/chat/rooms/g/1678/).

browser_inherit split to browser_inherit and browser_inherit_post_data;
the code for the latter didn't clear any post_data in the child before
copying from the parent either, and could cause flex errors (now fixed).

Res file for Ursula ('Desktop' Browse) build tweaked - bits in the
font choices dialogue renamed, and button bar rearranged to hold the
new Save As Draw button. Other builds have had Save As Draw and
Save As Text buttons added, or not, depending upon availability of
suitable sprites, required UI simplicity, etc.

Now have:

  Browse$ChoicesFile
  Browse$ControlsFile
  Browse$ChoicesSave
  Browse$ControlsSave

(the last two are new) for loading and saving of the Choices or Controls
files. If unset, <App$Dir>.Choices or <App$Dir>.Controls will be set.
E.g., you could set Browse$ChoicesFile to be:

  <App$Dir>.Choices,Choices:WWW.(app).Choices

for loading and

  <Choices$Write>.WWW.(app).Choices

for saving. (The browser never saves Controls at the moment, so the
relevant variable above isn't effectively implemented, but could be
in future). Similarly, to support asymetric loading/saving of the Hotlist,
there are HotlistSave, HistorySave and ImageHistorySave entries in Choices
to complement HotlistPath, HistoryPath and ImageHistoryPath (which are used
for loading). save_save_choices will create directories as needed to obtain
the given path (and has also been fixed in various areas that hadn't been
tested out until now; e.g. zero termination of the AppName$ChoicesFile
variable expansion...). !Run[D] files updated appropriately.

Table widthing code rewritten. Slower, but a lot better on the whole.
Still has some problems - still needs a final 'make sure nothing is
below minimum width' scan, which it should be possible to do without.
No time to fix this at present!

The reformatter will now 'glue together' an LI token followed by any
non-LI token; so a bullet point followed by an item should not be able to
have a line break inserted after the bullet because of very tight width
constraints (it could before - yuk...).

'about:' brings up a page about the browser and any Plug-Ins, as with
Navigator (for example).

URI files support titles, as per spec. version 8. Saving a current
location to the Hotlist will thus give a sensible title now (unless
you're in a frame, so there's no title to get...). Of course, v1.00
files without a title still work.

Note that NOBR is *not* supported in this build and this combined with
the new table widther may cause problems on some sites (e.g. Microsoft's
home page!).

Message_PlugIn_Busy. Plug-in code more robust when given invalid
browser instance handles by the plug-in.

Line spacing is now calculated on the basis of the normal style base serif
font, with all other fonts being forced into that line height. This does
mean that an unusually tall (say) sans serif font may get clipped. It
appears to be the only way to get around wildly different baseline
depths returned from the font metrics - you can't work out line spacing
based on each different font style; the line spacing will vary.

Table heighting (as opposed to widthing...) improved considerably; rowspan
can no longer cause very tall cells in odd places. Having trouble getting
rid of the single pixel breaks between vertically adjacent cells, though
I've not tried too hard. Widthing, though, seems fairly badly broken at
present... :-/

Set/clear of page_is_text flag made more robust (it looked as though there
was the potential for this to get stuck in a set state, though I've never
see the front-end behave in a manner which indicates this is the case).
The reformatter will now decrease leading if this flag is set (plain text
pages look daft with a line spacing that is OK for 'rich' text pages).
No reformatting is done if the page width changes by dragging on the
resize icon, though toggle size / full screen will still reformat even
if the contents are only text (browser needs to sort out various width
flags at this point).

Cut down on excessive redrawing when reformatting due to a change in
window dimensions is not done. If display_width hasn't changed, then no
redraw is needed. If this causes redraw problems, then whatever is
changing display_width needs investigating. It shouldn't be kludged
(basically) by forcing a redraw instead of a reformat.

TT/PRE/etc. text can now have a non-100% aspect ratio. 80-90% looks
best (ArcWeb, for example, uses 86%). New option 'TTAspect' in
the Choices files.

Debug builds link to a non-debug Unicode library now; stops stderr
being dumped to the bottom left of the screen if you've not redirected
it in the Run file.

RISC OS 3.1 seems to need more initial WimpSlot than later OS versions.
The 64 deep nested table set gives a 'No stack for trap handler' error
(which it really means in this case!) without 800K, even though 3.71
is happy with just 640K. So, the !Run file checks if Boot$OSVersion
is exactly 300, 310 or 311, and sets the WimpSlot accordingly.

!Run[D] files now require latest fetcher module versions (URL 0.21,
File 0.31, HTTP 0.58).

Calling HtmlEndParse at the end of html_get_next_token and setting up->context to NULL was wrong; fetch_fetcher would end up recalling html_get_next_token later which would then call HtmlParse even though the document parse had just finished! The HtmlEndParse call has now been moved to fetch_stop.

Altered reformatter to claim fonts inside a browser, rather than
claiming them for nothing and losing them afterwards.

Got rid of TAG == TABLE and ISBODY tests, replacing with tagno == TAG_TABLE.
Removed all references to TD, TH, TR and TABLE in the style word.

Created Protocols source file and moved a lot of message handling from handle_messages - the latter now serves as a high level distributor to lower level functions in Protocols. Incidentally, URL files (as used by the ANT suite) can be loaded by dragging to the browser in the same way as URI files - Not A Lot Of People Know That, etc.

Merged new hotlist display type Res file to existing resources, added
support for DataSave message so items can be dragged from the hotlist
to a specific window (RAM transfer for URI and URL files; ScrapFile for
HTML and Text but deleted afterwards and there are appropriate guards
to stop Reload just saying 'not found'; images run through ScrapFile and
there is no choice but to leave them there and do a conventional fetch).

All !RunD files now give a WimpSlot of 2304K. Some small changes to
the Argo and Ursula build Res files to make the menu trees more sensible.
Controls files now take 'file:/' instead of 'file://' in Protocols
section. Definitions at top of URLutils.c *not* altered, as then you
end up with invalid URLs - so it will accept 'file:/', but always generate
'file://'. This is because some browsers exports 'file:/'. Sigh.

make_no_[..._]memory_error functions now return a _kernel_oserror * rather
than void. It's always &erb returned, but it enables users to use a more
elegant 'return make_no_memory_error(1);', say, rather than something
like 'make_no_memory_error(1); return &erb;'. I obviously should've written
it like that at the outset, but never mind. All callers have been
appropriately updated.

The urlutils_leafname_from_url function now replaces illegal characters
(A7000 Welcome Guide p54...) in the leaf with legal alternatives.

Internal URL scheme is now a bit cleaner, with everything properly defined
in URLutils.h. All references to http:, file: and ftp:, with or without
a following '//' use the definitions in here now.

More tidying and some reorganising of Hotlist source. Auto-open delay is
now a Choices item. Some dependencies on statics removed (e.g. the
counting functions don't accumulate into the global item_number now).
The redraw functions used Wimp_TextOp - oops, so this has been amended
to use whatever is supported on your Wimp. This is now in a new function
(utils_text_width()), which the History menu routines also use (there was
a bug in the width routine there anyway, which is therefore fixed in
passing). Several other routines used Wimp_TextOp directly too, and
they have been altered to use the new function as well.

In hotlist code, one of the larger changes is in the API to hotlist_draw_r()
(formerly _hotlist_draw()) which now takes item widths and heights as
parameters - discovering these is quite slow, so doing it every time the
function calls itself recursively is a little less efficient than
passing the values in from elsewhere. Note that underscore prefixed
functions are being slowly renamed to _r suffixed functions, to match
the convention established by Tony Cheal with is table routines. This
makes it much more obvious when something is recursive, as the same
naming convention is used in every browser source file.

Finally, note that I intend to ditch SaveDBox and use an alternate window
with manual control of the messaging in Protocols.c. This will allow
various improvements which at present the SaveDBox operational methods
preclude. I'm going to have to do at least an alternate Window object for
the SaveDBox module to use soon in any case. Getting rid of SaveDBox will
help reduce, if only slightly, demands on the RMA.

Limits.h, and ensured consistent comment styling throughout all sources.
Fetch.c/h split to Fetch, FetchHTML and URLveneer. URLstat.c/h produced to
cope with this. OpenURL and Find sources created from bits in the Windows
source file that shouldn't have been there... These will get filled out
shortly. Note that a few functions in Fetch are due to be renamed and moved;
probably to Tokenutils.

Customer work complete, and this version just shipped. Had to comment out the code in Main.c that sets the user agent string to fake Netscape, as the persistent problems with forms in tables showed up much more on a modem link - net result was that the customer's log in page didn't work. Not faking Netscape gives an authorisation dialogue instead, allowing access to the site even if not by the most elegant of methods.