GitLab

The '3F6C0' abort fixed; reformat_left_margin didn't cope with a NULL cell pointer. This only happened if the image library tried to deal with an image in a table cell which wasn't properly dealt with by the table systems yet, for whatever reason. Rare, but persistent once it started happening because it depended on the value of the FIQ vector!

Put function header comments in SaveFile.c, at last.

Messages files now read version 2.01, 23 Feb 1998.

As a finishing touch, replaced the generic 'The browser requires...' errors in the !Run[D] files with '[Appname] requires'.

Customer build Res file fault corrected - URL bar writable icon had
ended up with allowed characters of 'Button' only when a set of
Help messages got imported.

Messages files now say "Version:2.00 (19-Feb-98)". Yay!

Precautions taken in table code to avoid divide by zero errors.

Framesets defining more frames than the frameset implies, for whatever
reason, should never cause a crash now - just report a 'Frames definition
is badly nested' error (if STRICT_PARSER defined). Along the same lines,
in a single document defining a set of nested frames, two /FRAMESETs in
succession could cause a fairly nasty crash. Fixed.

TIFFs do not get loaded by double-click now.

If holding down SHIFT to save a link contents to disc, you can also hold
down CTRL to bypass the cache (sets the browser's reloading flag). Noticed
when testing this that windows_create_browser didn't take account of the
Controls file 'UseSmall' entry when adjust-shift-clicking on links. It
does now.

There is now a complete and up to date set of interactive help messages
built into the Ursula, Customer and Phoenix build Res files.

WindowManager 3.98. Sets URI handler environment variables for
http, ftp and gopher.

Fixed 'doesn't reformat for unsized images' bug - only happens when the
deferred reformatter is enabled, hadn't remembered to check this in my
debug build where this is turned off. Oops.

Caret position in forms could get left behind despite attempts to rectify
this in v1.31 - now fixed (and faster, fortunately).

Hourglass + percentage displayed for History and Image History when
loading - it can take a while for very big histories, though in
practice you only see the visit history loading (has to do a lot
more work, and is thus quite a bit slower than the image history).

POST forms worked when targetted to frames, but were broken when
not targetted! (Forms data inherited from one browser to the same
browser; ended up freeing the flex block...). Fixed.

Now support 303 response code (redirect to GET). Treated as 301, i.e.
not support if STRICT_PARSER is defined, otherwise drops through to
the 302 handling code.

Pointer shouldn't get stuck in odd shapes when going to a new page now;
it gets reset to a standard shape every time the null handler that
checks the position is called, though (whether or not the handler thinks
the pointer is over a different token, if that token is NULL, it sets
the standard shape). A possible work around would be for a browser to
remember the pointer shape too; that's for the future, though.

Early stage table formatting functions could blow themselves apart if
tables_count_table decided there were no rows, columns or both. A
net table size of zero cells is now dealt with; slow, partial table
fetches in multiple windows with image loading turned on will now
*hopefully* be stable, where v1.31 would have bombed out repeatedly.

A nested frameset within one document will now inherit the border
width (frame spacing) and border colour of its parent. This is done
by copying the maxlen and indent fields of the parent token over
the child, and note it's done in the browser (fetch_preprocess_token),
not HTMLLib.

Border colour on a FRAMESET now used, with the first colour on any
FRAME within it overriding, as in NN 4 and MSIE 4.

<LI> bullets really do stick to the text next to them now (I'd done
that in an experimental piece of code and forgotten to merge it back
before the last check-in).

Browse$HotlistURL/URIFile and Browse$HomeURL/URIFile now work from
_TaskName in the Messages file, and are thus of the generic form
<App>$HotlistURL etc. - Docs.Notes and Docs.User updated appropriately.

Event 0x11d00 through to 0x11d7f will make the browser look up Controls
file entries 'JumpTo00' through to 'JumpTo7f' and read a URL from them.
This will be fetched in the ancestor window of the source of the event,
or a new window if such an ancestor can't be found [for Daytona demo].

NB: Nasty frames-related crash at http://www.teledanmark.dk/menu/start.htm
is *not* fixed in this source. NOBR is not supported.

Machine hung during last check-in; trying again... Apologies for sending out such a huge log message *twice*.

Check for WindowManager 3.97 and ensure Unicode$Path is set in all
!Run[D] files, don't set the Alias$@PrintType_FF4 variable, and updated
Customer build ROM obey file variants. Various other changes to
the Run files for new module versions, updated paths to support
new positions of choices, hotlist and histories (see later), etc.

!Sprites[22] files hold small !app icons for some variants, and
an ic_browse sprite. Some variants now have a Sprites and Sprites22
file instead of just Sprites, with the former containing various
mode 12 or 15 specific sprites.

Text files dragged to the URL writable are treated as ANT URL files. This
relies on URLBarWrit (Toolbars.h) being a unique ID, which it should be,
but beware of the Hotlist and Choices numberspaces...

INPUT TYPE=BUTTON supported. Form items without a FORM tag are now shown
(as MSIE 4, but not NN 4).

'*', '-', '@', '_' and '.' are not escaped when submitting forms now. The
Web interface to the IMDb now works.

INPUT TYPE=HIDDEN items will not affect the line height anymore - so
http://www.hotmail.com/ now has correctly aligned writable icons, for
example. Similarly, TAG_FORM and TAG_FORM_END items could push up
line height and don't anymore.

HRs with a specified pixel width will now influence the size of a table
cell (they didn't before).

BRs now checked by tagno field when the browser needs to know something
was an actual BR tag rather than just a line break signal, and by the
style bit entry when only the indication of a line break is required.

Table widths of 0 or 0% are ignored.

Trace.c updated to report height and background fields in a table_stream.

fm_putsl() writes a terminator into the string; the Forms.c routines were
calling this for displaying INPUT TYPE=PASSWORD fields using the FE_PassCode
literal string (a line of stars). This write into a read only data area
would make the debugger fault the access. A local char array is now used
instead, to get round this (note the use of var[]=literal rather than
var[sizeof(literal)]; strcpy(var, literal) due to some weird compiler bug
that copies the wrong thing into 'var' under some (undefined...)
circumstances).

Text areas don't scroll back to the top line when clicked in anymore;
single line writables don't scroll back to the left either. When
reentering a text area from 'above', the caret appears at the top line
rather than 'somewhere further down'...

ARROWS_MOVE_OUT compile time option at the top of Forms.c defines whether
you must press Tab/Shift+Tab to move between writable fields in forms or
if up/down will drop out of them, though if keyboard control is on this
is enforced (or you get trapped inside the form!).

urlutils_filetype_from_url now uses MimeMap module.

If fetcher is told a page is text, it'll check for a filename extension and
may choose to use this instead (e.g. it may find it's HTML instead). This
is to try and get around duff servers... (e.g. http://www.batalarms.co.uk/).

Save dialogues shouldn't flicker when options that don't change the
filetype are selected (before, the draggable sprite was always reset for
each selection). Noticed the erroneous setting of a static variable in
SaveFile.c by a call to this by SaveObject.c, and so added a flag to
savefile_set_filetype to deal with this - would have been possible to get
the wrong filetype sent to applications or at best the wrong filetype
sprite in the dialogue without that.

The caret shouldn't jump out of a form back to the URL writable if the page
reformats now.

Table background colours now supported (as in the colour you see in the
border space if the cellspacing is large enough; this is as in MSIE, not
as in Navigator). Drawfile output routines updated accordingly.

Corrected erroneous use of wimpt_dx() / wimpt_dy() in a couple of places
in Images.c, which meant that (say) 1x1 images didn't work correctly in
medium resolution display modes.

Now have support for save as text (component ID and event 0x12) and save
as Draw (component ID and event 0x13) buttons. Dubious conditions for
greying and ungreying the print, save source and view source buttons and
menu options sorted out as part of implementing the same for the two new
buttons; added greying out of their associated menu items in passing.

Turned kerning on in draw file objects (does mean a rather heinous
increase in file size, but this is the only way to ensure the draw file
matches the visible page).

Comments before functions in SaveDraw.c are now complete and up to date.

Image and visit histories now generate a crude hash number to speed up
searching for items. It does give a speed increase, though it's a
disappointingly small one.

Issue of left/right margins and cellpaddings sorted out. Now have
redraw_left/right_margin for finding out the basic gap you must leave.
redraw_left/right_gap then gives any extra indentation for LI, BLOCKQUOTE
or whatever. The last two can be subtracted from the display width to
get an available page width for any section of text. Note that
redraw_left_gap replaces redraw_margin. The redraw_start_x function
uses the above to work out where a line's left hand edge should be,
taking account of left/right/centre alignment. HRs have been fixed now
(they were quite broken in v1.30, I think) based on this new model and
the behaviour of MSIE/NN 4.

Fixed width of cells with no contents - cell padding values wouldn't
have worked properly as the reformatter returns 0 rather than the left
hand margin size if given no stream.

Removed FM_Absolute flags for Font_Paint (spotted by DBrown) - sets bit
2, which is reserved...?

IMG width and height in % terms now works correctly; a % of available
width (after margins and indents) or height on the main page or for
a table cell, if the image lies in one. Because of the chicken-and-egg
problem with the latter, the cell must specify a width and/or height
for things to work properly. If this is not done, you'll usually end
up with a 1:1 scaled image (as in Navigator 4, rather than ending up
with no image or even no cell (!), as in MSIE 4).

HEIGHT attribute on a TABLE tag is supported, but only in a crude
fashion; the extra height (if there is any) is distributed over the
rows in a linear fashion. This is probably all you have to do in
practice, but I haven't checked. To maintain a notion of min/max
height as well as width would of course require a great deal more
work...

If using client pull to reload a page with a fragment ('...#name')
specified, then the reload wouldn't work on the same page; it'd just
jump to the fragment position. This won't happen if b->reloading is
set now (so works in conjunction with client pull on the same page
forcing a non-cached fetch). Similarly, if POSTing to such a URL,
a fetch will proceed (both these fixes done originally for
http://jupiter.beseen.com/chat/rooms/g/1678/).

browser_inherit split to browser_inherit and browser_inherit_post_data;
the code for the latter didn't clear any post_data in the child before
copying from the parent either, and could cause flex errors (now fixed).

Res file for Ursula ('Desktop' Browse) build tweaked - bits in the
font choices dialogue renamed, and button bar rearranged to hold the
new Save As Draw button. Other builds have had Save As Draw and
Save As Text buttons added, or not, depending upon availability of
suitable sprites, required UI simplicity, etc.

Now have:

  Browse$ChoicesFile
  Browse$ControlsFile
  Browse$ChoicesSave
  Browse$ControlsSave

(the last two are new) for loading and saving of the Choices or Controls
files. If unset, <App$Dir>.Choices or <App$Dir>.Controls will be set.
E.g., you could set Browse$ChoicesFile to be:

  <App$Dir>.Choices,Choices:WWW.(app).Choices

for loading and

  <Choices$Write>.WWW.(app).Choices

for saving. (The browser never saves Controls at the moment, so the
relevant variable above isn't effectively implemented, but could be
in future). Similarly, to support asymetric loading/saving of the Hotlist,
there are HotlistSave, HistorySave and ImageHistorySave entries in Choices
to complement HotlistPath, HistoryPath and ImageHistoryPath (which are used
for loading). save_save_choices will create directories as needed to obtain
the given path (and has also been fixed in various areas that hadn't been
tested out until now; e.g. zero termination of the AppName$ChoicesFile
variable expansion...). !Run[D] files updated appropriately.

Table widthing code rewritten. Slower, but a lot better on the whole.
Still has some problems - still needs a final 'make sure nothing is
below minimum width' scan, which it should be possible to do without.
No time to fix this at present!

The reformatter will now 'glue together' an LI token followed by any
non-LI token; so a bullet point followed by an item should not be able to
have a line break inserted after the bullet because of very tight width
constraints (it could before - yuk...).

'about:' brings up a page about the browser and any Plug-Ins, as with
Navigator (for example).

URI files support titles, as per spec. version 8. Saving a current
location to the Hotlist will thus give a sensible title now (unless
you're in a frame, so there's no title to get...). Of course, v1.00
files without a title still work.

Note that NOBR is *not* supported in this build and this combined with
the new table widther may cause problems on some sites (e.g. Microsoft's
home page!).

Check for WindowManager 3.97 and ensure Unicode$Path is set in all !Run[D] files, don't set the Alias$@PrintType_FF4 variable, and updated

Customer build ROM obey file variants. Various other changes to
the Run files for new module versions, updated paths to support
new positions of choices, hotlist and histories (see later), etc.

!Sprites[22] files hold small !app icons for some variants, and
an ic_browse sprite. Some variants now have a Sprites and Sprites22
file instead of just Sprites, with the former containing various
mode 12 or 15 specific sprites.

Text files dragged to the URL writable are treated as ANT URL files. This
relies on URLBarWrit (Toolbars.h) being a unique ID, which it should be,
but beware of the Hotlist and Choices numberspaces...

INPUT TYPE=BUTTON supported. Form items without a FORM tag are now shown
(as MSIE 4, but not NN 4).

'*', '-', '@', '_' and '.' are not escaped when submitting forms now. The
Web interface to the IMDb now works.

INPUT TYPE=HIDDEN items will not affect the line height anymore - so
http://www.hotmail.com/ now has correctly aligned writable icons, for
example. Similarly, TAG_FORM and TAG_FORM_END items could push up
line height and don't anymore.

HRs with a specified pixel width will now influence the size of a table
cell (they didn't before).

BRs now checked by tagno field when the browser needs to know something
was an actual BR tag rather than just a line break signal, and by the
style bit entry when only the indication of a line break is required.

Table widths of 0 or 0% are ignored.

Trace.c updated to report height and background fields in a table_stream.

fm_putsl() writes a terminator into the string; the Forms.c routines were
calling this for displaying INPUT TYPE=PASSWORD fields using the FE_PassCode
literal string (a line of stars). This write into a read only data area
would make the debugger fault the access. A local char array is now used
instead, to get round this (note the use of var[]=literal rather than
var[sizeof(literal)]; strcpy(var, literal) due to some weird compiler bug
that copies the wrong thing into 'var' under some (undefined...)
circumstances).

Text areas don't scroll back to the top line when clicked in anymore;
single line writables don't scroll back to the left either. When
reentering a text area from 'above', the caret appears at the top line
rather than 'somewhere further down'...

ARROWS_MOVE_OUT compile time option at the top of Forms.c defines whether
you must press Tab/Shift+Tab to move between writable fields in forms or
if up/down will drop out of them, though if keyboard control is on this
is enforced (or you get trapped inside the form!).

urlutils_filetype_from_url now uses MimeMap module.

If fetcher is told a page is text, it'll check for a filename extension and
may choose to use this instead (e.g. it may find it's HTML instead). This
is to try and get around duff servers... (e.g. http://www.batalarms.co.uk/).

Save dialogues shouldn't flicker when options that don't change the
filetype are selected (before, the draggable sprite was always reset for
each selection). Noticed the erroneous setting of a static variable in
SaveFile.c by a call to this by SaveObject.c, and so added a flag to
savefile_set_filetype to deal with this - would have been possible to get
the wrong filetype sent to applications or at best the wrong filetype
sprite in the dialogue without that.

The caret shouldn't jump out of a form back to the URL writable if the page
reformats now.

Table background colours now supported (as in the colour you see in the
border space if the cellspacing is large enough; this is as in MSIE, not
as in Navigator). Drawfile output routines updated accordingly.

Corrected erroneous use of wimpt_dx() / wimpt_dy() in a couple of places
in Images.c, which meant that (say) 1x1 images didn't work correctly in
medium resolution display modes.

Now have support for save as text (component ID and event 0x12) and save
as Draw (component ID and event 0x13) buttons. Dubious conditions for
greying and ungreying the print, save source and view source buttons and
menu options sorted out as part of implementing the same for the two new
buttons; added greying out of their associated menu items in passing.

Turned kerning on in draw file objects (does mean a rather heinous
increase in file size, but this is the only way to ensure the draw file
matches the visible page).

Comments before functions in SaveDraw.c are now complete and up to date.

Image and visit histories now generate a crude hash number to speed up
searching for items. It does give a speed increase, though it's a
disappointingly small one.

Issue of left/right margins and cellpaddings sorted out. Now have
redraw_left/right_margin for finding out the basic gap you must leave.
redraw_left/right_gap then gives any extra indentation for LI, BLOCKQUOTE
or whatever. The last two can be subtracted from the display width to
get an available page width for any section of text. Note that
redraw_left_gap replaces redraw_margin. The redraw_start_x function
uses the above to work out where a line's left hand edge should be,
taking account of left/right/centre alignment. HRs have been fixed now
(they were quite broken in v1.30, I think) based on this new model and
the behaviour of MSIE/NN 4.

Fixed width of cells with no contents - cell padding values wouldn't
have worked properly as the reformatter returns 0 rather than the left
hand margin size if given no stream.

Removed FM_Absolute flags for Font_Paint (spotted by DBrown) - sets bit
2, which is reserved...?

IMG width and height in % terms now works correctly; a % of available
width (after margins and indents) or height on the main page or for
a table cell, if the image lies in one. Because of the chicken-and-egg
problem with the latter, the cell must specify a width and/or height
for things to work properly. If this is not done, you'll usually end
up with a 1:1 scaled image (as in Navigator 4, rather than ending up
with no image or even no cell (!), as in MSIE 4).

HEIGHT attribute on a TABLE tag is supported, but only in a crude
fashion; the extra height (if there is any) is distributed over the
rows in a linear fashion. This is probably all you have to do in
practice, but I haven't checked. To maintain a notion of min/max
height as well as width would of course require a great deal more
work...

If using client pull to reload a page with a fragment ('...#name')
specified, then the reload wouldn't work on the same page; it'd just
jump to the fragment position. This won't happen if b->reloading is
set now (so works in conjunction with client pull on the same page
forcing a non-cached fetch). Similarly, if POSTing to such a URL,
a fetch will proceed (both these fixes done originally for
http://jupiter.beseen.com/chat/rooms/g/1678/).

browser_inherit split to browser_inherit and browser_inherit_post_data;
the code for the latter didn't clear any post_data in the child before
copying from the parent either, and could cause flex errors (now fixed).

Res file for Ursula ('Desktop' Browse) build tweaked - bits in the
font choices dialogue renamed, and button bar rearranged to hold the
new Save As Draw button. Other builds have had Save As Draw and
Save As Text buttons added, or not, depending upon availability of
suitable sprites, required UI simplicity, etc.

Now have:

  Browse$ChoicesFile
  Browse$ControlsFile
  Browse$ChoicesSave
  Browse$ControlsSave

(the last two are new) for loading and saving of the Choices or Controls
files. If unset, <App$Dir>.Choices or <App$Dir>.Controls will be set.
E.g., you could set Browse$ChoicesFile to be:

  <App$Dir>.Choices,Choices:WWW.(app).Choices

for loading and

  <Choices$Write>.WWW.(app).Choices

for saving. (The browser never saves Controls at the moment, so the
relevant variable above isn't effectively implemented, but could be
in future). Similarly, to support asymetric loading/saving of the Hotlist,
there are HotlistSave, HistorySave and ImageHistorySave entries in Choices
to complement HotlistPath, HistoryPath and ImageHistoryPath (which are used
for loading). save_save_choices will create directories as needed to obtain
the given path (and has also been fixed in various areas that hadn't been
tested out until now; e.g. zero termination of the AppName$ChoicesFile
variable expansion...). !Run[D] files updated appropriately.

Table widthing code rewritten. Slower, but a lot better on the whole.
Still has some problems - still needs a final 'make sure nothing is
below minimum width' scan, which it should be possible to do without.
No time to fix this at present!

The reformatter will now 'glue together' an LI token followed by any
non-LI token; so a bullet point followed by an item should not be able to
have a line break inserted after the bullet because of very tight width
constraints (it could before - yuk...).

'about:' brings up a page about the browser and any Plug-Ins, as with
Navigator (for example).

URI files support titles, as per spec. version 8. Saving a current
location to the Hotlist will thus give a sensible title now (unless
you're in a frame, so there's no title to get...). Of course, v1.00
files without a title still work.

Note that NOBR is *not* supported in this build and this combined with
the new table widther may cause problems on some sites (e.g. Microsoft's
home page!).

When converted from hours to seconds, all the Choices ended up with the same history expiry times - they weren't to start with, though (and aren't anymore) :-)

Not all resources are up to date in this check-in, and documentation both within source and stuff in 'Docs' is out of date or missing - I was very pushed for time on this one... Hopefully will do another 'tidy up' check-in before close on Friday; until then, beware of anything other than the Ursula (Desktop browser) build. Anyway...

Export As Draw done. As part of this, FONT SIZE and SUP / SUB adjustment
of font size is done in fm_token_font_info rather than fm_find_token_font.

Bullets and switches are plotted as indirected sprite items, rather than
indirected text + sprite items - this relied on being in a redraw loop to
pick the sprites up from the local pool (failed during printing).

URI files now have a LF line ending rather than CR... '*' recognised
as an empty field when loading via. RAM transfer now (only worked for
loading from disc before).

Gave placeholder bounding boxes 4 OS units more minimum extra gap
vertically and reduced horizontal addition to this value * 1.5, rather
than * 2 (see refo...

Note that the 'Docs' documentation (possibly contrary to previous log messages) still hasn't been updated with the new SaveFile stuff, and function header comments have yet to be written for

SaveFile.c.

Fixed urlutils_pathname_to_url - OS_GSTrans doesn't like the same
input buffer as output buffer (fairly obvious, but I was living in
the hope of not having to duplicate the input path string).

Image history will not cache scrap file images anymore. Browser's
image handling library won't cross reference them either.

When dragging a single item from the hotlist to a Filer window, the
code now checks Ctrl - if held down, a URL file is written, else a
URI file. The state of any option buttons or radios in the last
Save File dialogue that was opened is no longer relevant...!

history_save_as_html could write out broken files when titles
for items in the History were not present. Fixed.

Hourglass switched on for hotlist and history saving as HTML;
hotlist_save_entries no longer closes the output file on error
(it should be done by the caller, since the caller is responsible
for opening the file and passing the FILE * pointer to
hotlist_save_entries).

There are a few known significant problems with this code but it's being checked in so the Choices can be worked on. Note that Res files etc. are not up to date across all builds. Progress is as follows...

Bug report prompted me to do this - now ignore <p> tags straight after
<li> tags, so '<ul><li><p>Some text' works as the author (or automatic
generator, more commonly) intended.

A <p> tag before a table will be acted upon now (it was ignored before).
Something like <li><p><table...> will give a line break and paragraph
space after the <li> despite the changes mentioned above, as in other browsers.
Both browsers differ from Navigator, where the table appears alongside
the <li> tag.

Multiple BR tags work as in MSIE / Navigator (they don't collapse to
zero height anymore).

For the above, line height (and so, <br><br> or <p> spacing) is now
calculated inside reformat_text_line_height, and is used with either
a token to get the text height at a given size (e.g. for general line
spacing or multiple BR tags) or NULL for normal size text (e.g. for
P spacing, though this value is in practice later scaled by 7/8ths in
reformat_check_height). Note this behaviour is exhibited by MSIE 4;
v3 gave two BRs the same spacing as one P (i.e. not font size
dependent).

Save dialogues can have an option button or couple of radios to
switch between various formats (e.g. URI or URL, sprite or original
format). See 'Docs.Notes' for more. The back-end to this is now
implemented (i.e. at the moment, save as URI or URL, save as original
image format). Note that when saving background images, a leafname
based on the original fetch URL is now offered rather than a generic
'Background'.

Internal URL scheme changed to be all lower case, so relativisation
through URL_Fetcher still makes sense... :-/

Holding down 'shift' when clicking on stop reverses the interpretation
of the Controls file 'StopWebServe' entry.

Fixed row / column count for exporting tables as text; fixed a few
bits and pieces of internal URL scheme stuff which got broken when
HTMLLib started using URL_Fetcher's relativisation.

Fixed some glitches in the modified status bar code (e.g. status inference wasn't working properly).

Shift+Toggle size always opened to not obscure the icon bar. If CMOS is
set to always show the icon bar, then Shift+Toggle size is meant to
reverse sense and open to absolute full size. It now does this.

!Run[D] files now require URL 0.22, HTTP 0.64, FTP 0.22, Gopher 0.08
and File 0.32.

Minor overhaul of 'Docs.Notes' (with 'Docs.User' similarly updated) to
include a few new bits and pieces.

Timeout values of 0 now mean 'forever'. Plug-in status messages now have
their own timeout setting. New Messages token 'Actv' for extra info when
a status message times out and the status line drops to 'Viewing' or
'Ready' when there is still a Busy state registered by the Plug-in.

Small Fetch windows don't become visible briefly for Plug-in fetches
when the fetch is complete (for SeeFetches:no, where these windows
should be hidden all the time).

WebServe may be controlled through the Browse front-end via.
Wimp_MAppControl reason code 4 (Wimp_MAppControl_Configure). Note the
renaming internally of 'WebServ' or 'WebServe' has been changed to
'Proxy' (with lower case equivalents where relevant); proxy name
and starting details come from the Messages file 'ProxyName' and
'ProxyComm' tokens. More in 'Docs.Notes'.

Res files updated for image history and PRE/TT font aspect ratio
choices. 'Don't expire' labels changed to 'Expire' (oops, didn't
notice the change in the development Browse's Res file when I
updated all of the others until now...).

When printing, Wimp_PlotIcon appears to ignore R4 and R5, plots
'somewhere' on the page, and tries to get the sprite from the global
pool. This latter part normally causes an error to be raised; though
on my machine I just get a corrupted error message. The Desktop font
gets lost at this point too. All have yet to be fixed; as an
interim work around, Wimp_PlotIcon objects are never drawn at all
if the global 'printing' flag is set.

Message_PlugIn_Busy. Plug-in code more robust when given invalid
browser instance handles by the plug-in.

Line spacing is now calculated on the basis of the normal style base serif
font, with all other fonts being forced into that line height. This does
mean that an unusually tall (say) sans serif font may get clipped. It
appears to be the only way to get around wildly different baseline
depths returned from the font metrics - you can't work out line spacing
based on each different font style; the line spacing will vary.

Table heighting (as opposed to widthing...) improved considerably; rowspan
can no longer cause very tall cells in odd places. Having trouble getting
rid of the single pixel breaks between vertically adjacent cells, though
I've not tried too hard. Widthing, though, seems fairly badly broken at
present... :-/

Set/clear of page_is_text flag made more robust (it looked as though there
was the potential for this to get stu...

i)  There can be two sets of gadgets, one set for page history and another set
    for image history.

ii) There can be one set of gadgets for both settings and two radio buttons to
    select between them.

Only one of these may be present at the same time.  Currently the radio button
version is the one that is in place.  To change to the other version delete the
radio buttons and copy the gadgets from the ChoicesTMP window into the
appropriate window.

Significant reduction in number of times reformatter is called during
a table widthing session results in a dramatic speed increase for nested
tables (e.g. 64 deep with a paragraph of text in the deepest table takes
about two seconds to load with near-instantaneous subsequent reformats,
as opposed to taking optimistically 28 days for a 32 deep table!).
This code relies on a very big stack of assumptions...

Save as plain text implemented.

Choices, Messages and Res files brought up to date where necessary.
Version number taken to 1.28, 04-Dec-97 (so I don't forget later,
basically...).

Image history - sizes of images are remembered for future reference (if the sizes aren't specified in the HTML, they can be looked for in the image history instead to minimise reformatting requirements). Choices file options ImageHistoryPath, ImageExpiryAge, ImageMaxSize and

SaveImageHistory added to support this (all have a direct analogy to
the global History items of the same name after removing 'Image').

Text area items are now the correct height for the number of rows
specified in the HTML, don't scroll a line too early, and have the
caret placed at the start of the text when moved into from above
or at the end when moved into from below (rather than always at
the end, which was behaviour inherited from single line writables,
where this is desirable). The top of the text area is aligned to
the top of any line of text on the same line, with the text area
dropping below the text, rather than the bottom of the area matching
the text baseline and extending upwards.

Filename extensions for download files are only stripped if an
attempt to convert to a RISC OS filetype through the Mime Mapper module
does not return an error or Data (0xffd) filetype. '.cgi' is a special
case which is always stripped.

Altered heading styles - all are bold, none are italic, H3 is as big
as H2 was, H2 is a little larger, and others scale down to H6 being
the size as normal text (but, as I say, bold).

Sorted out tables and forms. We can just look for tagno=TAG_FORM, and
get rid of the wobbly form_flag; also discarded the redundant
reprocess_table flag in fetch_preprocess_token. Two separate forms
in consecutive table cells (for example) which used to fail - they
were submitted as one single form - will now work correctly.

Fixed nasty bug in FontManage.c where font size 7 would intermittently
fail. The stupid font sizes that it could ask the Font Manager for may
be responsible for the occasional Font Manager crashes that have been
noticed. Array for font sizes was declared as [Limits_FontSizes], but
indices 1 to Limits_FontSizes are actually used - so needed a '+ 1'
in the declaration... :-/

Replaced the case insensitive string comparison functions in Utils.c
with more efficient versions by S.Brodie.

MAXLENGTH specifier in INPUT tags is now supported. If unspecified or
specifically zero, the browser overrides and allows any length.

All hotlist_find_match calls wrapped in '#ifndef REMOTE_HOTLIST' compile time option, for Customer builds.

Cross referencing of images when the background colour is different - should
not do it for backgrounds, for e.g. alpha transparent PNGs would then fail.
This was implemented, but it turns out it affects *all* cross referencing!
Fixed for just background images.

As described in Docs.TagNames, the tag name "ahodgkin_127beta2" associated
with this checkin applies to everything *except* Choices.c. v1.27 beta 2
was build with the Choices file tagged "ahodgkin_127beta". The confusion
arises because Choices.c got independently updated and checked back in
before I checked in the v1.27 beta 2 changes myself.

Adjust-click on forwards/backwards buttons did not work in the intermediate
build, and now does.

Adjust-click on form submission buttons where the submit method is POST
will now work correctly, as the new view inherits the extradata block
of the old. Failure of this is signalled through
make_no_fetch_memory_error, code 16 (see updated Errors file in Docs).
Note the name change of extradata in this context; more details below.

The passing of forms POST data and extra headers for sending in an
HTTP request via. the URL module was all done through pointers into
flex blocks, and was therefore very unsafe. All relevant functions now
use pointers to pointers to the data.

To remove confusion on the umpteen uses of the word 'extradata', the field
in browser_data has been renamed to 'post_data'. The 'extradata' parameters
used within FetchPage.c were all disconnected from the extra header info /
form POST data stuff that extradata is usually associated with, and have
thus also been renamed, in this case to 'appnddata' (Append Data).

As well as X-NoProxy, the browser sends the 'proper' HTTP headers
Pragma:no-cache and Cache-Control:no-cache.

A redirection from a POST request was not handled correctly; despite
what HTTP specs say, you're supposed to use GET for the new URL. The
browser was, but when it chopped off the redundant header data in the
request didn't terminate it and left Content-Type in anyway...! Fixed.

Ctrl+Tab implemented - URL completion. Comes from the hotlist URLs,
hotlist titles, history hosts, paths, full URLs and lastly titles.
See code comments for more (history_find_match, hotlist_find_match).

TableSupport option added to Choices; it is read, can be set by the
front-end, but doesn't actually do anything else yet.

Reversed Choices' semantics on 'don't expire by...' for History. Added
'needs_redraw' flag to choices_get_contents so that, for example, if the
table border types change, browsers get redrawn.

This is an intermediate check-in to allow work on Choices for the new table options and History choices as detailed below. Res files are not up to date except where indicated and there are several known bugs that will be fixed before the 'final' v1.27 is created. Any work on resources should only be done for the testbed !Browse.

Client side image maps implemented. There is code to draw highlighted
borders in CSIM.c, but this is not wired in yet; other than that,
the implementation is functionally complete. As part of this, centralised
the fetching of a targetted URL taking into account user request of a
new view and full screen mode, in fetchpage_fetch_targetted. The forms
library now uses this too, so form buttons respond to both adjust-clicks
and TARGET attributes.

Fixed APPLET handling where '.class' isn't present in the CODE attribute.

Paragraphs squashed at the top of cells/pages - browser would insert white
space before.

Now append a ' ' to the end of History menu items to prevent the Wimp
thinking the end of entries represents a keyboard shortcut (e.g. 'Home').

Netscape's handling of 'meta http-equiv="refresh"' is to start counting
when the fetch has completed and everything else has died down. The browser
will now not start counting until the animation handler is deregistered
(so formatting is complete) to show similar behaviour (note that this
checks the main handler, not the 'idle but returning to first frame'
drift handler).

URLs from requests for fetches by Plug-Ins are now relativised.

Page width change tolerance prior to reformat upped from 16 to 32 OS
units. Hoping to provoke a loosely connected bug with this change!

TableOuter, TableInner and SeeFetches choices added to all Choices
files, with appropriate loading and saving code in Main.c and Save.c.
AuthorFTP and AuthorFSh messages added for FTP authentication, and
dialogue handling code (the component in FetchHTML.c) updated to
recognise an FTP fetch and alter the dialogue presentation
appropriately.

All Messages file version numbers taken up to 1.27 (20 Nov 1997).

Following a UseNet suggestion, Ctrl+Toggle Size will increase the window
size to fill the screen vertically only; horizontal size/positioning is
not changed.

Shift+Tab in the URL writable will cycle through alternative fetcher
protocols (from both the Controls file and checking the fetcher modules
are actually present).

Hotlist doesn't require '://' in URLs when loading HTML, just ':/' - so
'file:/' URLs now will be reloaded correctly.

History system rewritten completely. GHistSize and VHistSize options
removed, and replaced by MaxSize and ExpiryAge. Now have global history
menus with most recently visited items at the top, and local history
menus which reflect the path that forward/back buttons would take.
Browsers are robust to background expiry of the History though this is
not implemented - date expiry and size checks are carried out on
history_record only. This does mean that with two windows open one could
have the history expired underneath it whilst another fetched, though;
the code handles this and update toolbars (greying items) as necessary.
It is possible to have the history limits so tight that even one entry
will not fit and again the code copes with this, though values read
from Choices are limit checked to ensure rather more useful results!

Implemented 'Save' button in save dialogues. Remembers pathnames and just
replaces the leaf now (hard coded exceptions for <Wimp$Scrap>... and
<Wimp$ScrapDir>...) - it did before, but only if you'd typed the path
in. Not many people did, given that you couldn't press Return or click on
a Save button to use that path...

In a similar vein, files of type Data or DOS will be checked for a '/xxx'
type extension and the MimeMap module will be used to find a more meaningful
filetype. If this can be handled, the file is loaded. This only works for
files dragged to the browser - the behaviour with inline data in web pages
will depend on the File module, and similarly, if File doesn't spot what is
going on and claims that the object is data, the browser will just open a
save dialogue for it.

!RunD files taken up to 3072K WimpSlot.

Hotlist's saved HTML page title wasn't internationalised - is now. This
opened up a significant can of worms; on file write error, the file would
never be closed, and if a caller of the save or load functions passed
in a filename held in the global Messages lookup buffer then subsequent
lookups in the callees would corrupt that filename. All sorted out now.

Local (not very useful) or global (useful) histories can be saved as HTML,
which opens up the possibility of sending your history to the hotlist
by saving to it. Local and global histories can also be emptied, though
this is probably not a feature that current release Desktop browsers need.
Inheritance of local history and certain UI features is now done more or
less for all cases where one browser window spawns another, too.

Vertical alignment on images is rather less ropey than it was (e.g.
ALIGN=TOP stands half a chance of working) but is still far from perfect.
This was part of fixing a nasty little bug in Redraw.c's setting of
an image position via. image_set_token_image_position, which was making
(amongst possibly many other things) client side image maps fail.
Image update where images had large borders was affected by a similar
problem too (more cans with more worms...).

Fixed image background filler functions; two problems. When cross
referenced images were replaced by base images in a browser because the
original owner was closing down, the original owner browser would stay
registered with ImageLib. Fixed; secondly, when images were deleted from
the image array causing those above to be renumbered, images registered
with ImageLib did not have their numbers updated (this was the one that
lead to the visible drop out of background images with PNGs on the Acorn
Internet home page when there were two views of the page and the first
was closed). This is now also sorted out.

Stopped UNIFONT forcing system font use and added calls to Font_WideFormat.
Made sure the system font option is read before fm_init is called!

User agent string now set if Netscape faking is disabled (format used is
"Acorn Browse/1.26 (RISC OS 3.71)".

Removed 'The Onion' link from some Hotlist files. Time showed that the site wasn't entirely Family Friendly (TM)... Removed Shift Control (it's gone offline now), and corrected the Telegraph URL from ...the-telegraph...

to just ...telegraph...

StrongHelp manual generator now tries to work out the number of lines in
the table on the root page more intelligently.

Plug-in support extended to handle Shockwave. Quite a lot of underlying
work for this, including a pseudo cache system for temporary files.

Bug in redraw routines: they plotted background images within table
cells, when nothing should have been drawn. Oops. When background images
in cells are properly supported, this can get sorted out.

Tweaked vertical plot position of HRs (up to 4 OS units too high before due
to rounding).

Various Res file bits and pieces, Ursula build taken up to v1.26 beta
for release on the Browser site. *Note* not all resources are up to date!
This will be done after AW97.

Res files sorted out a bit, to add the Proxy option to the Choices dialogues
and fix the position of the menu popup in the Others pane.

Bogus comment in Global.h showed up when trying to build the Customer
variant (SINGLE_USER undefined); fixed.

Various fixes in the code required for Shockwave support (many invalid assumptions about the OBJECT tag structure). Not finished yet though.

Played around with signal handling 'n' all that to try and get sensible
errors reported for aborts etc. using code by KBracey. Need a ROM patch
for _swix on RISC OS 3.7 upwards (or a local fixed copy of _swix),
otherwise should sort out most of the problems seen (mostly 'no stack
for trap handler' errors and a distinct lack of a register dump).

Plug-In view on redraw / ASAP choices now work as they should (ASAP
was previously broken).

Version numbers in Messages incremented to 1.25 (23 Oct 1997).

For Plug-In support, created new source file RMA.c/h to handle RMA
claims and releases, in an attempt to ensure leakage never happens.
As such, this source is *slightly* more advanced than that in the 1.25
AW '97 build, though functionally identical. Well, that is, at least
you can confirm zero RMA leakage with '-debug LMem' in TRACE builds now!

Intend to do a consistency check on comment syntax in all sources
shortly - I need to rebuild my StrongHelp manuals; can't keep track
of all of these new functions...

fetch_get_raw_data will notice if up->fetching is zero and return a 'finished' status rather than trying to continue reading data for the fetch. Fetches should never fall through that far but at least it will cope if they do.

3D table borders are now supported. 2D borders are used if the
inter-cell spacing is too small to fit the borders in (display resolution
dependent) - the external table border is 2D if the internal borders are,
else 3D. For cellspacing of 0, internal table borders must plot over the
outer edge of pixels inside the cell; for all greater spacings, the
borders take up all or part of the gap between them. The external border
will always fit around the outside of the cells, including the
cellspacing value in the gap between the outer cells and the border.

Anti-alias colour for placeholder ALT text was incorrect. Fixed.

I'd changed 'point' to 'points' in some of the Font Choices dialogues;
now changed back to 'point'.

The routine to find out how large an otherwise unsized object or imag...

Sorted out Res files, including fixing position of 'bytes' label in one of the Choices dialogues (I'd missed it out of a selection when everything else got moved down a bit). Unfaded Enc_Chinese menu entries, made sure text labels were wide enough for system font, changed 'Apply' on Choices dialogue to 'Set', and added ^K to hotlist keyboard shortcut lists.

Print Setup (i.e. Print dialogue) buttons all set to 'local', so the
stupid Toolbox doesn't close the dialogue and lose the caret before I
can see if it was in there to start with...

256 colour hotlist sprites taken back to standard 16 colour versions,
since there's a significant speed penalty on slower machines. The
testbed browser still has the 256 colour versions so the designs aren't
completely lost.

Changed access settings to exported builds to wr/r - lr/r was really getting
on my nerves whenever I wanted to try something temporary out.

View source, save source and print handlers would all try to work if
there was no source to act on - despite the fact that toolbar buttons
would be greyed out form them. This is fixed.

The Navigate menu has components greyed to match the toolbar state,
when opened. It isn't kept up to date dynamically, though this shouldn't
really be a problem (reopen the submenu...). As part of this, finally
sorted out conditions for the Stop button to be greyed, or the
GoTo/Go/Stop tristate to be at 'Stop' versus 'GoTo'.

Deferred reformatting is now disabled for external image fetches.

Browser-local client pull flag removed; hitting the Stop button simply
cancels any null handlers working for it. That way, client pull switches
back on in passing at the next fetch (it was never really switched off).
So to stop client pull, hit the stop button at any point.

Done CELLPADDING attribute; cellpadding field in reformat_cell (Global.h)
is redundant since the table token is accessible from there, and so it has
been removed. CELLSPACING support also added.

Now handles PARAM tags. Sorted out Plug-In bug that was related to Java setting a 0 by 0 graphics window before calling Wimp_Poll (fixed in Java).

Implemented queue for Plug-Ins so multiple broadcasts aren't sent for
several Objects in one data chunk.

Added Docs directory with some documentation in it. More things to keep
checking for stylistic consistency, horray ;-)

Corrected !Run[D] for Ursula build to need AcornURI but not TaskModule
(URI handler needed for !Mail to pick up mailto: links).

Added display_height field to browser_data, analogous to display_width,
to cope with % sized objects by width and height (see how HRs are
handled in Redraw.c for an example of how it was always fairly easy
with width, but not height until this addition). Though you do have
to reload to get a new size; reformat isn't enough. Must see to this
some time...

Fixed bug where basic typefaces were claimed *before* the Choices file
had been read. For unusual Choices settings, this could create some
'interesting' problems now and again. This was part of narrower scope
work in the Choices code to allow font changing without leaking font
handles (now done; fm_shutdown only ditches fonts, it keeps internal
structures - must then call  fm_lose_fonts for all browsers to get the
bitfields up to date, then rewrite the typeface definitions and reclaim
basic fonts). Noticed that fm_claim_basic_typefaces would claim multiple
instances of the same font if there were several cases of the same font
mapped to different typeface styles - fixed.

Implemented PlugInControl settings, but not SupportObject (fully).

Minimal support for font choices added, fixed problem with colour changing with browsers with no background colour specified.  Options for Objects implemented.

More reformatter code bugs fixed; this one regarding width of items. Any kerned string was overestimated (causing redraw bugs and caret position problems in forms, apart from other minor bits elsewhere) and the default size of a writable icon wasn't especially clever.

Crude Plug-In support; just about manages Java, but can't fetch on
behalf of Plug-In (for example). Had to change the default file access
URL construction to be 'file:/' instead of 'file://', or local file
fetches that reference Java applets won't work. This is in its very
early stages, and is being checked in mostly so that various Choices
issues can be worked on.