GitLab

Version 5.35, 4.79.2.20. Tagged as 'Kernel-5_35-4_79_2_20'

An attempt to do NVMemory by using part of the Flash that the OS is sitting
in for Customer L. Programming algorithm works, but I'm not confident that the
Kernel does the right thing yet.

Version 5.35, 4.79.2.19. Tagged as 'Kernel-5_35-4_79_2_19'

Version 5.35, 4.79.2.18. Tagged as 'Kernel-5_35-4_79_2_18'

Version 5.35, 4.79.2.17. Tagged as 'Kernel-5_35-4_79_2_17'

Detail:
  HAL entries have been entered for the Customer L UART (very much like the ARM
PrimeCell, rather than the 16550).
Admin:
  It builds.

Version 5.35, 4.79.2.16. Tagged as 'Kernel-5_35-4_79_2_16'

Detail:
  page swap as part of PagesUnsafe/PagesSafe mechanism
Admin:
  not tested

Detail:

Admin:
  not tested

Detail:
  ARM600.s
Admin:
  (highlight level of testing that has taken place)
  (bugfix number if appropriate)

kernel now attempts to substitute video mode numbers in face of h/w with limited bits-per-pixel support (not tested yet)

HAL_API document added - early draft only, of interest to those
writing or modifying HALs for new h/w
ARMop_API document added - early draft only, of interest only
to those modifying kernel to support new ARM cores
*** polite comments on HAL_API welcome ***

Version 5.35, 4.79.2.15. Tagged as 'Kernel-5_35-4_79_2_15'

First attempt at ARM9 support, and general clean-up of old ARM-specific code, now using vectored ARMops.

Not tested.

Version 5.35, 4.79.2.14. Tagged as 'Kernel-5_35-4_79_2_14'

Check-in of the few last-minute changes for the Customer L demo. Nothing exciting, apart from an extended touchscreen API.

Version 5.35, 4.79.2.13. Tagged as 'Kernel-5_35-4_79_2_13'

Version 5.35, 4.79.2.12. Tagged as 'Kernel-5_35-4_79_2_12'

more use of ARMops in page manipulation, change register usage of ARmops tested by kernel boot to star prompt only

Version 5.35, 4.79.2.11. Tagged as 'Kernel-5_35-4_79_2_11'

Detail:
  It's actually in a section removed conditionally for the HAL but it
    does keep the HAL branch up to date.

Version 5.35, 4.79.2.10. Tagged as 'Kernel-5_35-4_79_2_10'

More stuff. Up to the desktop now; cache on, working keyboard. Some source restructuring to start to make splitting it up into several object files more feasible.

Version 5.35, 4.79.2.9. Tagged as 'Kernel-5_35-4_79_2_9'

Imported from Kernel 5.36.

It says "Abort on data transfer".

Detail:
  Added the HAL NVRAM entries.
  Modified i2cutils to use the HAL entries for NVRAM and behave sensibly if the HAL reports that there is no NVRAM, in which case there must be a forced reset_cmos call so that the cache gets set up sensibly.
Admin:
  Tested under the RPC emulator and appears to be working correctly, although some calls to IIC are still being made in the no nvram case.

Version 5.35, 4.79.2.8. Tagged as 'Kernel-5_35-4_79_2_8'

Version 5.35, 4.79.2.7. Tagged as 'Kernel-5_35-4_79_2_7'

mjs macros switch on HAL for calling video code in HAL/pseudo HAL cases vduhint code even more almost ready to move to HAL

Version 5.35, 4.79.2.6. Tagged as 'Kernel-5_35-4_79_2_6'

Version 5.35, 4.79.2.5. Tagged as 'Kernel-5_35-4_79_2_5'

further kernel/HAL split work in video area almost-HAL code for VIDC20/IOMD in vdu.vduhint, now almost divorced from kernel workspace tested briefly in Ursula desktop environment

Version 5.35, 4.79.2.4. Tagged as 'Kernel-5_35-4_79_2_4'

partial video changes for kernel/HAL split near-HAL code for VIDC/IOMD in vdu.vduhint briefly tested in Ursula desktop build still some kernel workspace dependency in near-HAL code

Version 5.35, 4.79.2.3. Tagged as 'Kernel-5_35-4_79_2_3'

Version 5.35, 4.79.2.2. Tagged as 'Kernel-5_35-4_79_2_2'

* Added ARM_IMB and ARM_IMBRange SWIs as recommended by ARMv5.
* Some early prototype HAL bits popped in - a lot of source restructuring still
  to come.
* New debug target creates an AIF image with debug information, and translates
  this into an ASCII object file for the 16702B logic analyser.

Version 5.35, 4.79.2.1. Tagged as 'Kernel-5_35-4_79_2_1'

  [ E2ROMSupport
   .....
  ]
Detail:
  Changes to s.Middle (SysReadInfo routine that used #NVRamSpeed) and
  s.PMF.i2cutils #NVRamSpeed again
Admin:
  Compiles okay
  Requires HdrSrc-0_99 or greater (for MaxI2Cspeed variable)

Version 5.35. Tagged as 'Kernel-5_35'

(NVRamSpeed is not defined in the Kernel workspace so we need an
 alternative way to work the speed of the I2C bus - so I've used
 I2Cticks - defined in PMF.i2cutils)

Version 5.34. Tagged as 'Kernel-5_34'

  New routine in i2cutils that allows access to protected sections such as
  MAC address
  OS_ReadSysInfo 4 now checks both copies MACAddress if MACNVRAM2copies is set
Detail:
  32K EEPROM has to be configured with IIC address &A6 (i.e wired up on the pcb)
  ClockNVMemoryFast has been replaced with MaxI2Cspeed so that several different
  rates can be used depending on the devices on the IIC bus.
Admin:
  Need to implement routine that can use one copy of the MAC address to
  replace the other in the event of it being corrupted.


Version 5.33. Tagged as 'Kernel-5_33'

Detail:
  The kernel can now disable all substitutions into error messages that
    it generates and count the number of times each error is looked up.
    The ErrorCount BASIC program then displays that information so that
    you can see if any odd errors are occurring or weird errors that you
    would not be expecting.
  It is not sensible to build a release with countmsgusage enabled.
Admin:
  Tested in Ursula build.

Version 5.32. Not tagged

  Removed DriversInKernel conditional.
Detail:
  If the territory changes or the resource file changes, the kernel
    will now decache all the cached error blocks so that next time
    they are required, they will be looked up again.
  The error cacheing is now a kernel build option and is always set
    to on.
  Removed one of the 5 error messages to be cached - it never seems
    to happen.  The remaining 4 are more frequent.
Admin:
  Tested in Ursula build.
  Cannot be used with HdrSrc 0.94.  HdrSrc 0.95 and later is required
    (or HdrSrc 0.93 and earlier subject to other kernel requirements)
  Requires MessageTrans 0.42 or later for correct operation when a
    replacement messages file is loaded.

Version 5.32. Tagged as 'Kernel-5_32'

  Added common error cache.
Detail:
  Fixed module header validation code which was broken in 5.22.  This
    shouldn't have caused much of a problem as it was only a bizarre
    check (SWI chunk looked valid but SWI handler was 0) that would
    have failed - but be reported as a valid set of SWI entries.
  Added common error message cache.  Several common errors (Buffer
    overflow; Number not recognised; Bad vector release; and a couple
    of others) are now cached the first time they are translated into
    a block of memory in the system heap.
Admin:
  Tested in Ursula build - cacheing only active in Ursula build - change
    HdrSrc if you want it in your products too.
  Requires HdrSrc 0.94

Version 5.31. Tagged as 'Kernel-5_31'