GitLab

Detail:
  This set of changes:
  * Adds basic support for multiple GraphicsV drivers, by way of some new OS_ScreenMode reason codes for registering/deregistering, selecting and enumerating drivers (11, 64-68)
  * Tidies up handling of HAL video calls so that the HAL calls will be transformed into a bona fide GraphicsV driver if they're implemented
  * Changes handling of 16bpp gamma table entries so that they're sent to GraphicsV in a generic form instead of in a VIDC-specific form
  * Adds a new GraphicsV call and defines new VIDC list items to allow GraphicsV drivers to utilise the new pixel formats
  File changes:
  * h/VIDCList, hdr/VIDCList, Makefile - Add new header export containing VIDC list type 3 definitions, to avoid repeated definitions in other components
  * Resources/UK/Messages - Add new GraphicsV/OS_ScreenMode error strings and some missing processor type strings
  * hdr/KernelWS - Clean up some pre-GraphicsV definitions, and add new workspace locations for storing the current GraphicsV driver number and the driver list
  * hdr/Options - Remove obsolete InverseTextTransparency option
  * hdr/VduExt - Add VDU variable 192 for storing GraphicsV driver number (same as ROL's VideoV driver number). Remove old 'Flag_*' mode flag definitions (use new 'ModeFlag_*' defintions instead). Add new OS_ScreenMode reason codes.
  * s/ARM600, s/VMSAv6, s/vdu/vdu23, s/vdu/vdugrafa, s/vdu/vdugrafd, s/vdu/vdupalxx, s/vdu/vdupointer, s/vdu/vduwrch - Strip out pre-GraphicsV code. Update GraphicsV code to use correct driver number.
  * s/ArthurSWIs - Pass the default GraphicsV claimant the VduDriverWorkSpace instead of ZeroPage
  * s/Getall - Add Hdr:VIDCList and s/vdu/VduGrafHAL to list of GETs
  * s/NewIRQs - Remove HAL VSync IRQ initialisation, is now handled by grafvhal. Remove old HAL VsyncIRQ entry point, all VSyncs are now handled by VsyncIRQ_ExtEntry.
  * s/PMF/osbyte - Stop OS_Byte 19 waiting forever if no video driver is active
  * s/PMF/osinit - Remove HAL VSync IRQ initialisation, is now handled by grafvhal
  * s/vdu/vducursoft - Use new workspace variable names and flag names
  * s/vdu/vdudecl - Remove old HALDAG_* definitions, GVDAG_* definitions are used instead. Add definition of the per-driver workspace structure and flags.
  * s/vdu/vdudriver - Remove pre-GraphicsV code. Update InitialiseMode to check for and initialise a HAL driver. Use cached driver features word in a few places instead of calling GraphicsV each time. Update PalIndexTable to disable VIDC mangling of 16bpp gamma tables.
  * s/vdu/vdugrafv, s/vdu/vdugrafhal - HAL<->GraphicsV code split off into its own file (vdugrafhal). Default GraphicsV claimant now only deals with VSync events for the active driver.
  * s/vdu/vdumodes - Get rid of old VIDC List type 3 definiton; now in hdr/VIDCList
  * s/vdu/vduswis - Added OS_ScreenMode reason codes 11 and 64-68 for registering, deregistering, selecting and enumerating GraphicsV drivers. Update mode set code to not bother checking if the driver supports the pixel format; instead we assume that the driver's vet mode call will do the check for us.
Admin:
  Tested in Tungsten, IOMD, OMAP3 & BCM2835 ROMs
  Requires HdrSrc-2_38 and updated video driver modes


Version 5.35, 4.79.2.203. Tagged as 'Kernel-5_35-4_79_2_203'

Detail:
  s/Middle - Added OS_ReadSysInfo 13 to allow the kernel to validate a key handler before the owner attempts to install it
  Resources/UK/Messages - Text for new "Bad key handler" error
  s/GetAll, s/PMF/Def - Get rid of now obsolete s/PMF/Def file. It only contained definitions for pre-HAL hardware, and for the key handler layout (now in Hdr:Keyboard)
  hdr/KeyWS - Increased size of KeysDown array so it can hold 768 keys instead of 160. Trim a couple of obsolete variables, and increase CurrKey/OldKey from 1 byte to 4 bytes.
  s/PMF/key, s/PMF/osbyte - Main bulk of the changes for the new key handling. All the important interfaces are now able to deal with extended (i.e. > 8 bit) internal key numbers, and the kernel is able to cope with key handlers which use 16 bit internal/low level key numbers instead of 8 bit.
Admin:
  Tested on Pandora & BB-xM
  Requires HdrSrc-2_20


Version 5.35, 4.79.2.178. Tagged as 'Kernel-5_35-4_79_2_178'

NewReset.s:
The one remaining use of SetBorder was to denote the user asked for and got a CMOS reset, which in the HAL case emitted a warning because setting the border is potentially complicated/slow.
To solve this, the reset is noted and replaces the normal RISC OS banner with a warning message. The behaviour and text for this comes from the BBC Master, though the escape key is used in place of break since a reset isn't actually needed.
Moved the unused cputable inside its corresponding switch.
Two occurrences of WriteS_Translated would have executed the message in the V=1 case.
KernelWS/Resources:
Flag added to workspace, translation added to messages files.
Heapman.s:
Commented out use of SetBorder removed.
Kernel.s:
SetBorder macro removed.
Middle.s:
Switched out use of SetBorder removed.
Super1.s:
Conditional WriteS_Translated would try to execute the message in the opposite condition case.


Version 5.35, 4.79.2.157. Tagged as 'Kernel-5_35-4_79_2_157'

The kernel already looks after all other aspects of the ARM CPU, so can look after the cache control command too.
 HelpStrs.s:New tokens for help and syntax
 CmdHelp.s:UK help and syntax
 Arthur3.s:Tables updates for *CONFIGURE/STATUS, lined some stuff up, default error text sync'd with Hdr:NewErrors
 MoreComms.s:Parsing and doing of *CACHE
 Utility.s:Hashing table updated for *CACHE
Other minor changes
 hdr/Options:Bring 'MosVer' into the private header
 hdr/RISCOS:aasm aliases for SP removed, MainVars and MosVer made private, added definition of the start of application space
 HeapMan.s:Use of GRAB changed to Pull
 Offset of TutuCMOS changed for more informative PrintSoundCMOS
 PMF/osbyte.s:Use OsBytes header file in place of MainVars

Version 5.35, 4.79.2.151. Tagged as 'Kernel-5_35-4_79_2_151'

The text had cunning hardspaces in it so that the *HELP text lines up nicely using OS_PrettyPrint, but not taking into account that internationalised syntax errors don't use OS_PrettyPrint so output VDU31,31,31 and jumped all over the place.
Syntax message rephrased to fit on one line.
Syntax and help for *TV cleared up since the help text contained all the syntax information.
Spotted 2 wasted instructions in Oscli.s while investigating, added some comments too.

Version 5.35, 4.79.2.137. Tagged as 'Kernel-5_35-4_79_2_137'

Implement OS_ConvertVariform, internally the other conversions now just call it.
Add tester for Variform to 'Dev'.
Made block copy weirdness for XScale dependent on XScale arch flag.

Version 5.35, 4.79.2.126. Tagged as 'Kernel-5_35-4_79_2_126'

Detail:
  Lots of changes since last version, at least the following:
  * Updated OS timestamp, removed alpha status
  * Negative INKEY OS version changed to &AA
  * GraphicsV is now alocated vector number &2A
  * ROM moved up to &FC000000
  * Max application slot increased to 512 Mbytes (for now)
  * Max size of RMA increased to 256 Mbytes
  * RMA is now first-created dynamic area (so it gets lowest address after
    top of application slot)
  * OS_Memory 10 reimplemeted
  * New OS_ReadSysInfo 6 values 18-22 added
  * OS_ReadSysInfo 8 gains flag bit to indicate soft power-off
  * Misc internal top-bit-set-address fixes
  * *ChangeDynamicArea can take sizes in megabytes or gigabytes
  * Magic word "&off" in R0 passed to OS_Reset powers down if possible
  * Added acceleration: block copy; CLS; text window scroll up; rectangle
    fill
  * Disabled LED flashing in page mode (liable to crash)
  * Masked sprite plot and VDU 5 text avoids reading the screen if possible
  * Framestore made USR mode accessible
  * Fix for VDU 5,127 bug - now relies on font definitions being in extreme
    quarters of memory, rather than bottom half
  * Allocated 64-bit OS_Convert... SWIs
  * IIC errors use allocated error numbers
  * Looks for Dallas RTC before Philips RTC because we're using a Philips
    NVRAM device with the same ID
  * Fix to bug that meant the oscillator in the Dallas RTC wasn't enabled
  * Default mouse type (USB) changed to allocated number
  * Ram disc max size increased to 128 Mbytes (Ursula merge) and made
    cacheable for StrongARMs (not XScale)
  * Branch through zero handler now works in USR mode, by use of a
    trampoline in the system stack to allow PC-relative register storage
  * Address exception handler changed to not use 0 as workspace
  * OS_Memory 13 extended to allow specification of cacheability and access
    privileges
  * Added OS_Memory 16 to return important memory addresses
  * RISCOS_MapInIO() takes cacheable flag in bit 3, access permissions in
    bits 10 and 11, doubly-mapped flag in bit 20, and access permissions
    specified flag in bit 21
  * Bug fix in last version for application abort handlers didn't quite
    work; register shuffle required
  * "Module is not 32-bit compatible" error now reports the module name
  * Default configured language changed from 10 to 11 (now Desktop again)

Version 5.35, 4.79.2.51. Tagged as 'Kernel-5_35-4_79_2_51'

Version 5.35, 4.79.2.48. Tagged as 'Kernel-5_35-4_79_2_48'

More stuff. Up to the desktop now; cache on, working keyboard. Some source restructuring to start to make splitting it up into several object files more feasible.

Detail:
  RiscPC-like (UserIF = Morris4) and Ursula-like (UserIF=Ursula)
  builds of the Kernel have their messages in a subdirectory while
  more generic builds use the main Messages file.

  The main file has had the RISC OS User Guide references removed
  and the "There is not enough memory" message changed to the more
  correct "Memory can not be moved".
Admin:
  Partially tested. Fixed STB-400 fault #1479

Version 5.29. Tagged as 'Kernel-5_29'

Details:
  The Kernel will now compile to produce a pure 32-bit system if No26bitCode is
  set to TRUE.
  If No26bitCode is FALSE, then the Kernel will be a standard 26-bit Kernel,
  although some internal changes have taken place to minimise compile
  switches between the two cases. See Docs.32bit for more technical info.

  The hardest part was the flood-fill...

Other changes:
  Pointer shape changes now take place on the next VSync, rather than actually
  WAITING for the VSync. Turning the Hourglass on shouldn't slow your machine
  down by 5% now :)

  Lots of really crusty pre-IOMD code removed.

Admin:
  Tested in 32 and 26-bit forms in a limited desktop build. Basically, this
  will need to see a lot of use to iron out difficulties. I'd like anyone who
  has a non-frozen project to at least attempt using this Kernel.

Version 5.23. Tagged as 'Kernel-5_23'

CPU type messages internationalised.
"Unknown OS_PlatformFeatures reason code" internationalised.
RunningOnEmul flag tweaked.
MorrisIDString conditional removed.
New modules added to SWI list at the end of the chain, on grounds that
the first-registered modules are probably more important.
*ChangeDynamicArea moved into UtilityModule from TaskManager.

Version 4.65. Tagged as 'Kernel-4_65'

Bandwidth limit for 7500FE fixed.
RO371Timings flag set to :LNOT:STB

Version 4.64. Tagged as 'Kernel-4_64'