GitLab

Add support for the new RISC OS 5 style sprite mode word. Add partial support for alpha channel sprite masks. Implement OS_ScreenMode reasons 13-15

Detail:
  ECFShift/ECFYOffset:
  - hdr/PublicWS - Add ECFShift and ECFYOffset to list of public exports (SpriteExtend was using hardcoded values). Rearrange exports so that VduWorkspace exports are now labelled as such.
  - hdr/KernelWS - Make sure ECFShift & ECFYOffset match their exported locations
  - hdr/OSRSI6, s/Middle - Add OS_ReadSysInfo 6 items 83 & 84, for reading ECFYOffset and ECFShift locations
  Mode flags/VDU variables:
  - Makefile - Add hdr/VduExt to the C header exports
  - hdr/VduExt - Get rid of NotRVVTBarWobblyBits macro and defined VDU variables manually so that Hdr2H will handle them. Begin replacing overly generic 'Flag_*' mode flag definitions with 'ModeFlag_*' instead. Define new flags as required by the new screen/sprite modes. Add OS_ScreenMode reason codes and mode selector format (from s.vdu.vdudecl)
  - NewModes/NEWF2, NewModes/OldPSSrc, NewModes/PSSrc, s.vdu.vdu23, s.vdu.vducursoft, s.vdu.vdudriver, s.vdu.vdugrafg, s.vdu.vdugrafj, s.vdu.vdugrafl, s.vdu.vdumodes, s.vdu.vdupal10, s.vdu.vdupal20, s.vdu.vdupalette, s.vdu.vdupalxx, s.vdu.vduwrch - Renaming Flag_* to ModeFlag_*
  - s.vdu.vdudecl - Remove OS_ScreenMode reason codes & mode selector format definitions; these are now in hdr/VduExt. Flag_* -> ModeFlag_* renaming.
  - s.vdu.vdupalxx - Apply a greyscale palette in PV_SetDefaultPalette if the greyscale mode flag is set
  New sprite types:
  - s.vdu.vdudriver - Extend GenerateModeSelectorVars to deal with the wide mask flag, 64K sprites, and the new RISC OS 5 sprite mode word format.
  - s.vdu.vdugrafdec - Store more information about the sprite in the SprReadNColour ... SprLog2BPC block.
  - s.vdu.vdugrafg - Update SpriteVecHandler to be able to detect whether RISC OS 5 format sprites are allowed palettes. Update SetupSprModeData to store the extra sprite info that's defined in vdugrafdec. Update PutSprite to fault any sprites with wide masks - SpriteExtend must be used for that (once implemented!)
  - s.vdu.vdugrafh - Update WritePixelColour to avoid temporary poking of NColour VDU variable for 8bpp sprites. Correctly replicate data when writing to RISC OS 5 format sprites. Update ReadPixelMask, WritePixelMask, SpriteMaskAddr, GetMaskspWidth to deal with wide masks. Delete obsolete bounce_new_format_masks routine.
  - s.vdu.vdugrafi - Comment updated to reflect new reality
  - s.vdu.vdugrafj - Get rid of unused code block in CreateHeader/PostCreateHeader. Update SanitizeSGetMode to generate RISC OS 5 style sprite mode words where applicable. Update DecideMaskSize to rely on GetMaskspWidth for calculating mask width.
  - s.vdu.vdugrafl - Update SwitchOutputToSprite/SwitchOutputToMask to deal with the new sprite formats. Allow PushModeInfoAnyMonitor to fail.
  - s.vdu.vduswis - Extended OS_ReadModeVariable to cope with new sprite types
  Misc:
  - s.vdu.vdudriver - Fixed bug with VIDCList copying where any -1 value in the structure would terminate the copy, instead of only -1 as a control item number
  - s.vdu.vduswis - Implemented OS_ScreenMode 13 (Mode string to specifier), 14 (mode specifier to string), and 15 (set mode by string). Mostly as per ROL's specs, but minus support for teletext attributes, and plus support for new RISC OS 5 attributes (L... layout specifier, 4096 & 24bpp packed modes, etc.)
  - s.vdu.vduwrch - Pick correct default text colours for the new modes
Admin:
  Tested on BB-xM
  Part of an implementation of the Extended Framebuffer Format spec:
  http://www.riscosopen.org/wiki/documentation/show/Extended%20Framebuffer%20Format%20Specification


Version 5.35, 4.79.2.194. Tagged as 'Kernel-5_35-4_79_2_194'

Version 5.35, 4.79.2.192. Tagged as 'Kernel-5_35-4_79_2_192'

GPIODevice: defines for OMAP4 targets
KernelWS: bump up the IICBus_Count from 3 to 4

Version 5.35, 4.79.2.187. Tagged as 'Kernel-5_35-4_79_2_187'

Detail:
  Briefly, this set of changes:
  * Adjusts PhysRamTable so that it retains the flags passed in by the HAL from OS_AddRAM (by storing them in the lower 12 bits of the size field)
  * Sorts the non-VRAM entries of PhysRamTable by speed and DMA capability, to ensure optimal memory allocation during OS startup.
  * Adjust the initial memory allocation logic to allow the cursor/sound chunk and HAL noncacheable workspace to come from DMA capable memory
  * Extends OS_Memory 12 to accept a 'must be DMA capable' flag in bit 8 of R0. This is the same as available in ROL's OS.
  * Extends OS_DynamicArea 0 to allow the creation of dynamic areas that automatically allocate from DMA capable memory. In ROL's OS this was done by setting bit 12 of R4, but we're using bits 12-14 for specifying the cache policy, so instead bit 15 is used.
  * Fixes OS_ReadSysInfo 6 to return the correct DevicesEnd value now that the IRQ/device limit is computed at runtime
  File changes:
  * hdr/OSEntries - Add definitions of the various flags passed to OS_AddRAM by the HAL. Add a new flag, NoDMA, for memory which can't be used for DMA.
  * hdr/KernelWS - Tidy PhysRamTable definition a bit by removing all the DRAM bank definitions except the first - this makes it easier to search for code which is interacting with the table. Remove VRAMFlags, it's redundant now that the flags are kept in the table. Add DMA allocation info to InitWs.
  * s/AMBControl/memmap - Updated to mask out the flags from PhysRamTable when reading RAM block sizes.
  * s/ARM600 - Strip out a lot of IOMD specific pre-HAL code.
  * s/ChangeDyn - Updated to cope with the flags stored in PhysRamTable. Implement support for DMA-capable dynamic areas. Rewrite InitDynamicAreas to insert pages into the free pool in the right order so that the fastest memory will be taken from it first.
  * s/GetAll, s/Middle - Fix OS_ReadSysInfo 6 to return the correct HAL-specific DevicesEnd value
  * s/HAL - Significant rework of initial RAM allocation code to allow the kernel workspace to come from the fastest DMA incapable RAM, while also allowing allocation of DMA capable memory for HAL NCNB workspace & kernel cursor/sound chunks. ClearPhysRAM rewritten as part of this.
  * s/MemInfo - Updated to cope with the flags stored in PhysRamTable. Add support for the new OS_Memory 12 flag. Update OS_Memory 7 to not assume PhysRamTable entries are sorted in address order, and rip out the old pre-HAL IOMD implementation.
  * s/NewReset - Remove GetPagesFromFreePool option, assume TRUE (as this has been the case for the past 10+ years). Revise a few comments and strip dead code. Update to cope with PhysRamTable flags.
  * s/VMSAv6 - Remove a couple of unused definitions
  * s/vdu/vdudriver - Update to cope with PhysRamTable flags
Admin:
  Tested in Kinetic RiscPC ROM softload, Iyonix softload, & OMAP3


Version 5.35, 4.79.2.186. Tagged as 'Kernel-5_35-4_79_2_186'

hdr/Options: Switch removed
s/Modhand: Switch removed, now considered equivalent to DebugROMInit. DebugROMInit changed so that the callback ordering is as expected, batched up until "callbacks" is hit after Service_PostInit.
PMF/osbyte: Redundant RISC OS 2.01 code deleted

Version 5.35, 4.79.2.184. Tagged as 'Kernel-5_35-4_79_2_184'

SystemName, ROMSizeOffset, HAL32, HAL26 only used here, moved here.
Remove uses of "M_" booleans, apparently that's bad form.
Fix SWIDespatch_Size for the non thumb capable case (was ASSERTing).
Swapped UserMemStart for AppSpaceStart.
Removed last use of OldComboSupport (pre Medusa!).
Removed switch 'CDVPoduleIRQs', a correction to the machine definitions mean this can now simply be switched on NumberOfPodules (previously, IOMD couldn't chain podule interrupts).
Take out disabled sub interrupt support - it's in CVS if you want to try to get it working.
Moved ConfiguredLang to 11 for everyone, it only matters if !Boot fails, and no harm in making it common for 5.xx onwards.

Version 5.35, 4.79.2.183. Tagged as 'Kernel-5_35-4_79_2_183'

Add new HAL call, HAL_IRQMax, to allow the kernel to determine the number of IRQ lines/devices at runtime

Detail:
  hdr/HALEntries - Reuse the old HAL_MonitorLeadID call number for HAL_IRQMax
  hdr/KernelWS - Rearrange CursorChunkAddress workspace a bit. Removed unused OldOscliBuffs and a couple of pre-HAL allocations, and made DefIRQ1Vspace the same size for all build configs. Add an IRQMax var to zero page workspace to cache the value returned by HAL_IRQMax.
  s/HAL - Initialise IRQMax shortly after HAL initialisation. Revise ClearPhysRAM comment to reflect which vars are preserved in the current version of the code.
  s/NewIRQs - Strip out a fair bit of pre-HAL code to make the file more readable. Update OS_ClaimDeviceVector/OS_ReleaseDeviceVector to check against IRQMax instead of the MaxInterrupts compile-time limit.
Admin:
  Tested on BB-xM, Iyonix, RiscPC, Pi
  Although the OS will now nominally adapt at runtime to how many IRQ devices there are, it's still using MaxInterrupts as an upper limit as the device claimant table has a fixed memory allocation.


Version 5.35, 4.79.2.182. Tagged as 'Kernel-5_35-4_79_2_182'

OS_CallAfter and OS_CallEvery were treating the delay in R0 as a signed number, limiting its possible range. The PRM didn't require this (a -ve delay doesn't make sense, so implicitly times are unsigned), reworked to allow times up to 0xFFFFFBFF.
Aside:
  OSLib exports these functions as 'int', but it doesn't seem to make a distinction for unsigned versus signed anyway (other unsigned arguments are plain int too)
  The 'callx' library was already prototyped with unsigned times back in 1997

Added comment to hdr/Options about FirstUnpluggableModule - since the keyboard and mouse drivers got moved out of the kernel in 3.50, the original intent (to not allow you to unplug vital modules) has long since been lost, and really the only use of this value is to save 8 bits of CMOS frugal bits.

Version 5.35, 4.79.2.181. Tagged as 'Kernel-5_35-4_79_2_181'

Permits applications to query what value would be used in the event of a CMOS reset for a given configure value. Notably, the configure plugins will use this in favour of 'ResetCMOS'.
hdr/Options: retire the 'Select16BitSound' switch, add comment for ChecksumCMOS switch
hdr/KernelWS: DuffEntry and Nowhere moved here
Kernel.s: Unused OSMD removed, retire single use of SPIRQ in favour of r13_irq
Middle.s: Retire SPIRQ
NewReset.s: Trim out 300+ lines of CMOS reset defaults, call OS_NVMemory 6 instead
PMF/i2cutils.s: CMOS reset default code and table moved here with refactoring
Note, the previous code preserved YearCMOS during the zeroing, only to unconditionally write it later - so have removed it from the zeroing step.
Note, the locations 80-111 are now considered as system CMOS in the allocations hence are now wiped too (previously they got skipped as user CMOS during R-power-on).

Tested on OMAP3 ROM with delete-power-on and R-power-on variants, and a simple BASIC program to read locations 0-255 via OS_NVMemory.

Version 5.35, 4.79.2.180. Tagged as 'Kernel-5_35-4_79_2_180'

Detail:
  s/Middle - Added OS_ReadSysInfo 13 to allow the kernel to validate a key handler before the owner attempts to install it
  Resources/UK/Messages - Text for new "Bad key handler" error
  s/GetAll, s/PMF/Def - Get rid of now obsolete s/PMF/Def file. It only contained definitions for pre-HAL hardware, and for the key handler layout (now in Hdr:Keyboard)
  hdr/KeyWS - Increased size of KeysDown array so it can hold 768 keys instead of 160. Trim a couple of obsolete variables, and increase CurrKey/OldKey from 1 byte to 4 bytes.
  s/PMF/key, s/PMF/osbyte - Main bulk of the changes for the new key handling. All the important interfaces are now able to deal with extended (i.e. > 8 bit) internal key numbers, and the kernel is able to cope with key handlers which use 16 bit internal/low level key numbers instead of 8 bit.
Admin:
  Tested on Pandora & BB-xM
  Requires HdrSrc-2_20


Version 5.35, 4.79.2.178. Tagged as 'Kernel-5_35-4_79_2_178'

Detail:
  hdr/HALDevice - Added HALDeviceSysPeri_BMU device type and some device IDs for the BMUs in the Pandora & TouchBook
Admin:
  Tested in OMAP3 ROM build


Version 5.35, 4.79.2.177. Tagged as 'Kernel-5_35-4_79_2_177'

More haste, less speed. Retagged as Kernel-5_35-4_79_2_175.

Version 5.35, 4.79.2.175. Tagged as 'Kernel-5_35-4_79_2_175'

Variously the call to TranslateError was either followed (outside the switch) by an unnecessary SETV, or missing SETV for the non international case.
Added DMA controller HAL device for IOMD.

Version 5.35, 4.79.2.174. Tagged as 'Kernel-5_35-4_79_2_174'

Default CMOS tweaks now apply for the RPi hardware. Was missed in
the previous commit.

You can now build the Kernel without the ROM debug output stuff
that's enabled for odd-numbered builds, by passing FREEZE_DEV_REL=TRUE
into the makefile. For example, in the Components file, you'd add:

  -options FREEZE_DEV_REL=TRUE

onto the Kernel line.

Version 5.35, 4.79.2.171. Tagged as 'Kernel-5_35-4_79_2_171'

Detail:
  s/HAL, s/NewReset - Moved IIC initialisation to just after timer initialisation, and crucially, before keyboard scan initialisation. This makes things a lot easier for the HAL if it wants to use IIC during the keyboard scan (previously IIC would be enabled inbetween HAL_KbdScanSetup and the first call to HAL_KbdScan)
  hdr/HALDevice - Added a device ID for the Pandora audio controller
Admin:
  Tested on Pandora


Version 5.35, 4.79.2.168. Tagged as 'Kernel-5_35-4_79_2_168'

Detail:
  hdr/HALDevice - Added new HID device type, Keyboard sub-type, and Pandora keyboard device ID
Admin:
  Tested on Pandora, rev C2 BB, rev A2 BB-xM, rev C1 TouchBook


Version 5.35, 4.79.2.166. Tagged as 'Kernel-5_35-4_79_2_166'

Fix addresses sent to GraphicsV_SetDMAAddress when external framestore in use. Add ID for BCM2835 VDU HAL device.

Detail:
  hdr/KernelWS, s/vdu/vdudriver, s/vdu/vduwrch - Fixed wrong addresses being sent to GraphicsV_SetDMAAddress when an external framestore is in use. Previously VideoPhysAddr was being treated as if it was the base of screen memory, but that's only the case if an internal framestore is in use. Since VideoPhysAddr is part of PhysRamTable it's not possible to change it to point to an external framestore, so a new workspace variable, TrueVideoPhysAddr, is used instead.
  hdr/HALDevice - Added device ID for BCM2835 VDU device
  s/PMF/IIC - Corrected an incorrect comment in IICDoOp
Admin:
  Tested on Raspberry Pi with high processor vectors


Version 5.35, 4.79.2.147.2.22. Tagged as 'Kernel-5_35-4_79_2_147_2_22'

Detail:
  hdr/GPIODevice - Removed existing 'unknown' revision and added 'B rev 1' and 'B rev 2' in its place, ready for new HAL that can report the board revision.
Admin:
  Tested on Raspberry Pi (B rev 1)


Version 5.35, 4.79.2.147.2.21. Tagged as 'Kernel-5_35-4_79_2_147_2_21'

Version 5.35, 4.79.2.147.2.19. Tagged as 'Kernel-5_35-4_79_2_147_2_19'

Detail:
  hdr/HALEntries - Add new HAL_Video_StartupMode HAL entry to allow the HAL to specify a startup mode
  s/HAL, s/Kernel - Tweaked debug routines
  s/vdu/vdudriver - Make use of HAL_Video_StartupMode in InitialiseMode to decide what initial mode should be. Clean up some hacks & debug. Improve handling of external framestores; if bit 5 of GraphicsV_DisplayFeatures r0 is set, the kernel will now allow the display driver to grow/shrink/move its framestore in response to mode changes.
  s/vdu/vdugrafv - Adjust default GV_FramestoreAddress implementation to only claim vector if HAL returns a framestore
  s/vdu/vduswis - Re-enable FindOKMode
Admin:
  Tested on Raspberry Pi with high processor vectors


Version 5.35, 4.79.2.147.2.18. Tagged as 'Kernel-5_35-4_79_2_147_2_18'

Detail:
  hdr/HALDevice - Added new HAL devices and types from RPi branch
Admin:
  Untested!


Version 5.35, 4.79.2.164. Tagged as 'Kernel-5_35-4_79_2_164'

Fix crash in OS_Hardware 4 when encountering devices which are newer than the caller supports. Add new device IDs for Raspberry Pi audio devices.

Detail:
  s/HAL - Fixed crash in OS_Hardware 4 when encountering devices which are newer than the caller supports
  hdr/HALDevice - Added new HAL devices for Raspberry Pi audio devices
Admin:
  Tested on Raspberry Pi with high processor vectors


Version 5.35, 4.79.2.147.2.17. Tagged as 'Kernel-5_35-4_79_2_147_2_17'

Detail:
  hdr/HALDevice - Add new inter-processor communications device type. Add device IDs for Pi/BCM2835 GPIO interface & VCHIQ
  hdr/GPIODevice - Add Raspberry Pi GPIO type & interface revision (currently 'unknown')
Admin:
  Tested in Raspberry Pi ROM with high processor vectors
  New IDs required for BCM2835-0_17


Version 5.35, 4.79.2.147.2.16. Tagged as 'Kernel-5_35-4_79_2_147_2_16'

Detail:
  Revisions Kernel-5_35-4_79_2_153 and Kernel-5_35-4_79_2_161 merged with one
  trivial conflict.
Admin:
  Confirmed that this builds, but not tested on hardware.

Version 5.35, 4.79.2.147.2.15. Tagged as 'Kernel-5_35-4_79_2_147_2_15'

Previously HAL_PhysInfo took one of two routes to get the arrangment table of arrangement table size.
Reorganised to accept a subreason to allow other physical info to be requested.


Version 5.35, 4.79.2.161. Tagged as 'Kernel-5_35-4_79_2_161'

Detail:
  hdr/HALDevice - Added new device IDs used by BCM2835 DMA controller & DMA channels
Admin:
  Tested in BCM2835 ROM


Version 5.35, 4.79.2.147.2.13. Tagged as 'Kernel-5_35-4_79_2_147_2_13'

Detail:
  This functions like OS_Hardware 4, but enumerates devices in the
  chronological order of registration.
Admin:
  Builds, but untested.

Version 5.35, 4.79.2.160. Tagged as 'Kernel-5_35-4_79_2_160'

No accepts  r0 = b31-24 set 0
                 b23-16 fully qualified IIC address
                 b15-0  starting offset
            r1 = buffer pointer
            r2 = number of bytes to tranfer
            r4 = b31-24 display number
                 b23-16 head
                 b15-0  reason code (=14)
Now returns r0 = result codes as per HAL_IICTransfer()
            r1 = buffer pointer incremented by number of bytes transferred
            r2 = number of bytes *not* transferred
            r4 = 0
Removed '_' after Video in entry numbers to be consistent with other HAL entry naming, and HAL_VideoFlybackDevice.
Added IICStatus return numbers to Hdr:HALEntries.
Stop calling HAL_MonitorLeadID as only IOMD implemented it - just guess VGA until the graphics driver says otherwise.

Version 5.35, 4.79.2.159. Tagged as 'Kernel-5_35-4_79_2_159'

Admin:
  Required by HAL/OMAP3 0.68

Version 5.35, 4.79.2.158. Tagged as 'Kernel-5_35-4_79_2_158'

NewReset.s:
The one remaining use of SetBorder was to denote the user asked for and got a CMOS reset, which in the HAL case emitted a warning because setting the border is potentially complicated/slow.
To solve this, the reset is noted and replaces the normal RISC OS banner with a warning message. The behaviour and text for this comes from the BBC Master, though the escape key is used in place of break since a reset isn't actually needed.
Moved the unused cputable inside its corresponding switch.
Two occurrences of WriteS_Translated would have executed the message in the V=1 case.
KernelWS/Resources:
Flag added to workspace, translation added to messages files.
Heapman.s:
Commented out use of SetBorder removed.
Kernel.s:
SetBorder macro removed.
Middle.s:
Switched out use of SetBorder removed.
Super1.s:
Conditional WriteS_Translated would try to execute the message in the opposite condition case.


Version 5.35, 4.79.2.157. Tagged as 'Kernel-5_35-4_79_2_157'

With no VRAM, in Kernerl.s.HAL line 370, the less than 16M case sets aside half the RAM as available for video (more than, it uses no more than 32M) but the exactly equals 16M case set aside none.
Add some exports to hdr.HALEntries to define the subreasons to OS_Hardware.

Version 5.35, 4.79.2.154. Tagged as 'Kernel-5_35-4_79_2_154'

The only fake result now is the hard ROM amount, which is hardwired to 4MB and might not be correct.
Unrelated changes
 hdr.HALDevice: Assign a device for VIDC20.
 hdr.KernelWS: Reorder into ascending order, remove legacy addresses.
 s.ARM600: Move PhysSpaceSize inside :LNOT:HAL switch.
 s.Kernel: Move PhysSpaceSize inside :LNOT:HAL switch.

Version 5.35, 4.79.2.153. Tagged as 'Kernel-5_35-4_79_2_153'

Detail:
  Hdr/HALEntries - Added HAL_UARTDefault entry, as per HAL branch
Admin:
  Untested


Version 5.35, 4.79.2.147.2.9. Tagged as 'Kernel-5_35-4_79_2_147_2_9'

Detail:
  hdr/HALEntries - Brought in line with RPi branch, plus addition of new HAL_UARTDefault HAL entry, to allow DualSerial to determine which (if any) of the HAL UARTs should be the default UART accessed via OS_SerialOp
  s/GetAll - Add GET of Hdr:SerialOp
  s/PMF/osbyte - Use OS_SerialOp 10 when constructing filename to open for OS_Byte 2
Admin:
  Tested in OMAP3, Tungsten ROMs


Version 5.35, 4.79.2.152. Tagged as 'Kernel-5_35-4_79_2_152'

The kernel already looks after all other aspects of the ARM CPU, so can look after the cache control command too.
 HelpStrs.s:New tokens for help and syntax
 CmdHelp.s:UK help and syntax
 Arthur3.s:Tables updates for *CONFIGURE/STATUS, lined some stuff up, default error text sync'd with Hdr:NewErrors
 MoreComms.s:Parsing and doing of *CACHE
 Utility.s:Hashing table updated for *CACHE
Other minor changes
 hdr/Options:Bring 'MosVer' into the private header
 hdr/RISCOS:aasm aliases for SP removed, MainVars and MosVer made private, added definition of the start of application space
 HeapMan.s:Use of GRAB changed to Pull
 Offset of TutuCMOS changed for more informative PrintSoundCMOS
 PMF/osbyte.s:Use OsBytes header file in place of MainVars

Version 5.35, 4.79.2.151. Tagged as 'Kernel-5_35-4_79_2_151'

Detail:
  An undocumented entry condition of TickOne is that r0 contains the device
  number corresponding to Timer0. This must be passed to HAL_IRQClear on
  some platforms.
Admin:
  Tested only on a Raspberry Pi. Also added enumeration of entry numbers in
  comments in Hdr:HALEntries - a handy reference when debugging from the
  command line!

Version 5.35, 4.79.2.147.2.8. Tagged as 'Kernel-5_35-4_79_2_147_2_8'

While the HAL and kernel were being split some temporary macros were used for the bits being worked on, after 12 years of use they're probably safe to adopt.
mjsCallHAL -> CallHAL; mjsAddressHAL -> AddressHAL; mjsHAL -> HAL.
OS_VIDCDividerSWI code now always does NoSuchSWI (had been switched out previously).
File vduhint.s no longer assembled (was empty).


Version 5.35, 4.79.2.150. Tagged as 'Kernel-5_35-4_79_2_150'

  1: Added HAL_FramebufferAddress entry.
  2: Minor mod the NoIrqVecSwiDispatch mods recently submitted. Improved coverage
  3: Added compile time switch InverseTextTransparency to toggle sense of text
  (pre-wimp) for use until correct transparency behaviour is introduced in the RPi
  start.elf.
  4: Ensured that if a non aligned frame buffer is reported, ALL of the space
  is actually mapped in.
Detail:
  (list files and functions that have changed)
Admin:
  builds and runs .. Still needs service_mode extension work to replace hard
  coded mode definition files
  (highlight level of testing that has taken place)
  (bugfix number if appropriate)


Version 5.35, 4.79.2.147.2.5. Tagged as 'Kernel-5_35-4_79_2_147_2_5'

Detail:
  hdr/HALDevice - Add device ID for new SmartReflex-based CPUClk device that takes over from the current OMAP3 one on AM/DM37x devices
Admin:
  Tested in OMAP3 ROM


Version 5.35, 4.79.2.145. Tagged as 'Kernel-5_35-4_79_2_145'