GitLab

Detail:
  This module was ignoring the possibility of the Internet module being
    re-initialised underneath it - something which can happen if there
    is an Internet module in flash as well as main ROM.  This is an
    experimental fix for this problem.
Admin:
  Not tested.

Version 2.18. Tagged as 'LanManFS-2_18'

Detail:
  Pass OPTIONS=-DNO_NETBEUI from the Components file if you do not need
    NetBEUI support, and LanManFS will be 12K smaller.
  In NetBEUI mode, LanManFS sends Service_DCIProtocolStatus as required.
  In IP mode, LanManFS notices Service_DCIProtocolStatus from the Internet
    module when it dies and marks all its sockets as needing reconnection.
  Booting behaviour changed to look for !ArmBoot again and not attempt
    the boot if it is missing.  Removed lots of grotty backdoor hacks
    that used to be used to determine this.
Admin:
  Not tested at all.  This will need very thorough testing before it can
    be considered for release.

Version 2.14. Tagged as 'LanManFS-2_14'

  Fixed search handle haemorrhaging.
Detail:
  The directory lookup routines cached directory search handles to avoid
    hammering the server with repeated requests to open directories.
    Unfortunately, it was possible for these to be forgotten without
    being freed up leading to resource loss at the server end.  Eventually,
    the server gives up servicing you and reports errors.  This will only
    occur once a significant number of accesses have been performed (the
    number depends entirely on server configuration).  This leak is now
    fixed.
Admin:
  Tested against Cerium - debug reports that no handles are being leaked.

Version 2.07. Tagged as 'LanManFS-2_07'

  Introduced new error message for re-entrancy prevention trap to use.
Detail:
  When 'pinging' an SMB server, LanManFS does not wait for any response
    but the response reading routine knows to just throw away any old
    SMBchkpth responses that it gets and try reading again.
  Re-entrancy trap now has its own error "LanManFS in use" &1663E, which
    means you no longer see "!Armboot files nested too deeply" which is
    confusing.  The only way you can provoke this message is if you use
    Alt-Break whilst the NetBIOS/IP code is executing.  The error plays
    the same part as "FileCore in use" does for FileCore.
Admin:
  Verified module still works and the anti idle-out features still work.

Version 2.04. Tagged as 'LanManFS-2_04'

  Fix for ./.. files in short filename shares.
  Long multiply now provided in assembler.
Detail:
  *LMLS is a new filesystem-specific command which performs the same
    task as "smbclient -L" does under UNIX - ie. listing all the shares
    available on the specified host.
  When enumerating the shares on a remote server, LanManFS now remembers
    all the printers, IPC, device and disc shares (for *LMLS to output).
  The 32x32->64 multiply routine is now provided in assembler instead of
    the previous huge amount of obscure C taken from NSPRLib.  This is
    more understandable (and almost certainly far smaller and quicker
    and doesn't need a hack to stop the compiler mis-optimising it!)
  Old short filename shares still had problems with the . and .. file
    filtering.  Programmer fault there - should've let the compiler do
    the optimisations :-)
  Server info string fixed to byte-reverse the port numbers when printing
    the string into the info buffer.  Now claims to be talking to port 139
    as it should.
Admin:
  Tested in general desktop use for several days, plus experimental versions
    tested in other boot ROMs.

Version 2.03. Tagged as 'LanManFS-2_03'

  Support for spaces in machine names.
  Merge of sbrodie_LanManFS_dev branch to trunk.
Detail:
  LanManFS 2.00 supports the "NT LM 0.12" protocol, enabling it to
    use long filenames on mounted shares.
Admin:
  Supporting documentation:
    1215,256/FS: LanManFS Software Functional Specification.
  Same as LanManFS-1_87_1_1_1_1_2_13.

Version 2.00. Tagged as 'LanManFS-2_00'

RiscOS/Sources/Networking/LanManFS is now locked out.

The rest of Omni will be imported at a later date.

Version 1.87, tagged as LanManFS-1_87