GitLab

Want LSR not ROR otherwise in the need help + HAL + 2 bit case the IIC address in R1 comes out as &800000A1.
Added HAL device ids for a couple more RTC devices.

Version 5.35, 4.79.2.199. Tagged as 'Kernel-5_35-4_79_2_199'

Step changes in RealTime are now accompanied by a service call. Note the initial read isn't announced, mainly because this is before the module chain is started so nobody's listening anyway.

Version 5.35, 4.79.2.193. Tagged as 'Kernel-5_35-4_79_2_193'

The three subreasons were being dealt with as follows

8  - time only => convert time; read clock & convert that; mix; to UTC; set
15 - date only => convert date; to UTC; set
24 - both      => convert both; to UTC; set

So subreason 15 ended up setting the clock with the UTC date not taking into account any rollover/under due to the timezone. Now, the behaviour is

15 - date only => convert date; read clock & convert that; mix; to UTC; set

An example program to illustrate this is

 DIM block 128
 REM Example boundary case for -ve timezone
 REM *config.timezone -5
 REM TIME$="Sun,01 Jan 2013.19:01:00"

 REM Example boundary case for +ve timezone
 *config.timezone 5
 TIME$="Sun,01 Jan 2013.04:59:00"

 PRINT"Local => ";TIME$
 FOR i = 1 TO 31
  block?0=15
  $(block+1)="Sun,"+RIGHT$("0"+STR$i,2)+" Jan 2013"+CHR$0
  SYS"OS_Word",15,block
  OSCLI"echo <sys$time> <sys$date> <sys$year>"
 NEXT

Fault originates in Kernel-4_63-1_1_2_2.
Fixes ticket #230.

Version 5.35, 4.79.2.185. Tagged as 'Kernel-5_35-4_79_2_185'

hdr/Options: Switch removed
s/Modhand: Switch removed, now considered equivalent to DebugROMInit. DebugROMInit changed so that the callback ordering is as expected, batched up until "callbacks" is hit after Service_PostInit.
PMF/osbyte: Redundant RISC OS 2.01 code deleted

Version 5.35, 4.79.2.184. Tagged as 'Kernel-5_35-4_79_2_184'

SystemName, ROMSizeOffset, HAL32, HAL26 only used here, moved here.
Remove uses of "M_" booleans, apparently that's bad form.
Fix SWIDespatch_Size for the non thumb capable case (was ASSERTing).
Swapped UserMemStart for AppSpaceStart.
Removed last use of OldComboSupport (pre Medusa!).
Removed switch 'CDVPoduleIRQs', a correction to the machine definitions mean this can now simply be switched on NumberOfPodules (previously, IOMD couldn't chain podule interrupts).
Take out disabled sub interrupt support - it's in CVS if you want to try to get it working.
Moved ConfiguredLang to 11 for everyone, it only matters if !Boot fails, and no harm in making it common for 5.xx onwards.

Version 5.35, 4.79.2.183. Tagged as 'Kernel-5_35-4_79_2_183'

Permits applications to query what value would be used in the event of a CMOS reset for a given configure value. Notably, the configure plugins will use this in favour of 'ResetCMOS'.
hdr/Options: retire the 'Select16BitSound' switch, add comment for ChecksumCMOS switch
hdr/KernelWS: DuffEntry and Nowhere moved here
Kernel.s: Unused OSMD removed, retire single use of SPIRQ in favour of r13_irq
Middle.s: Retire SPIRQ
NewReset.s: Trim out 300+ lines of CMOS reset defaults, call OS_NVMemory 6 instead
PMF/i2cutils.s: CMOS reset default code and table moved here with refactoring
Note, the previous code preserved YearCMOS during the zeroing, only to unconditionally write it later - so have removed it from the zeroing step.
Note, the locations 80-111 are now considered as system CMOS in the allocations hence are now wiped too (previously they got skipped as user CMOS during R-power-on).

Tested on OMAP3 ROM with delete-power-on and R-power-on variants, and a simple BASIC program to read locations 0-255 via OS_NVMemory.

Version 5.35, 4.79.2.180. Tagged as 'Kernel-5_35-4_79_2_180'

Detail:
  s/Middle - Added OS_ReadSysInfo 13 to allow the kernel to validate a key handler before the owner attempts to install it
  Resources/UK/Messages - Text for new "Bad key handler" error
  s/GetAll, s/PMF/Def - Get rid of now obsolete s/PMF/Def file. It only contained definitions for pre-HAL hardware, and for the key handler layout (now in Hdr:Keyboard)
  hdr/KeyWS - Increased size of KeysDown array so it can hold 768 keys instead of 160. Trim a couple of obsolete variables, and increase CurrKey/OldKey from 1 byte to 4 bytes.
  s/PMF/key, s/PMF/osbyte - Main bulk of the changes for the new key handling. All the important interfaces are now able to deal with extended (i.e. > 8 bit) internal key numbers, and the kernel is able to cope with key handlers which use 16 bit internal/low level key numbers instead of 8 bit.
Admin:
  Tested on Pandora & BB-xM
  Requires HdrSrc-2_20


Version 5.35, 4.79.2.178. Tagged as 'Kernel-5_35-4_79_2_178'

Variously the call to TranslateError was either followed (outside the switch) by an unnecessary SETV, or missing SETV for the non international case.
Added DMA controller HAL device for IOMD.

Version 5.35, 4.79.2.174. Tagged as 'Kernel-5_35-4_79_2_174'

The kernel recently took back ownership of the *CACHE command and it's configure counterpart, but wasn't reading the CMOS value on startup.
Spotted while looking at bus transactions on IOMD, and wondering where they all are, then realising it's all running from the cache.

Version 5.35, 4.79.2.170. Tagged as 'Kernel-5_35-4_79_2_170'

STB default = off, desktop default = on.
Collapsed single use of 'ErrorsInR0' switch.

Version 5.35, 4.79.2.167. Tagged as 'Kernel-5_35-4_79_2_167'

Fix addresses sent to GraphicsV_SetDMAAddress when external framestore in use. Add ID for BCM2835 VDU HAL device.

Detail:
  hdr/KernelWS, s/vdu/vdudriver, s/vdu/vduwrch - Fixed wrong addresses being sent to GraphicsV_SetDMAAddress when an external framestore is in use. Previously VideoPhysAddr was being treated as if it was the base of screen memory, but that's only the case if an internal framestore is in use. Since VideoPhysAddr is part of PhysRamTable it's not possible to change it to point to an external framestore, so a new workspace variable, TrueVideoPhysAddr, is used instead.
  hdr/HALDevice - Added device ID for BCM2835 VDU device
  s/PMF/IIC - Corrected an incorrect comment in IICDoOp
Admin:
  Tested on Raspberry Pi with high processor vectors


Version 5.35, 4.79.2.147.2.22. Tagged as 'Kernel-5_35-4_79_2_147_2_22'

Detail:
  Docs/RPiNotes - Deleted, contents no longer relevant
  s/HAL, s/Kernel, s/vdu/vduswis, s/pmf/key - Cleaned up debug code
  s/NewIRQs - No need to piggy back on timer 0 IRQ to generate a fake VSync; PushModeInfo already claims/releases TickerV as appropriate if video driver doesn't provide a VSync IRQ.
  s/NewReset - Re-enable LookForHALRTC call, the stack imbalance bug was fixed before the Pi changes were merged in
  s/vdu/vducursoft - Streamline PostWrchCursor a bit by only preserving R14 around RestorePointer if the software pointer is in use
  s/vdu/vdudriver - Amend ModeChangeSub improvements to ensure old external framestore handling logic is used if driver doesn't support framestore growth/realloc
Admin:
  Tested on Raspberry Pi with high processor vectors
  Kernel now looks to be in a good state for merging back into HAL branch
  Note - Software mouse pointer support in vducursoft only checks HALVideoFeatures, so doesn't take into account the capabilities of any GraphicsV driver that may be in use.


Version 5.35, 4.79.2.147.2.20. Tagged as 'Kernel-5_35-4_79_2_147_2_20'

Detail:
  s/PMF/osinit - MonitorLeadType is now stored in ZeroPage again, instead of at whatever R1 happens to point at (which seemed to be 0 when I tried it)
Admin:
  Tested on BB-xM with high processor vectors


Version 5.35, 4.79.2.162. Tagged as 'Kernel-5_35-4_79_2_162'

No accepts  r0 = b31-24 set 0
                 b23-16 fully qualified IIC address
                 b15-0  starting offset
            r1 = buffer pointer
            r2 = number of bytes to tranfer
            r4 = b31-24 display number
                 b23-16 head
                 b15-0  reason code (=14)
Now returns r0 = result codes as per HAL_IICTransfer()
            r1 = buffer pointer incremented by number of bytes transferred
            r2 = number of bytes *not* transferred
            r4 = 0
Removed '_' after Video in entry numbers to be consistent with other HAL entry naming, and HAL_VideoFlybackDevice.
Added IICStatus return numbers to Hdr:HALEntries.
Stop calling HAL_MonitorLeadID as only IOMD implemented it - just guess VGA until the graphics driver says otherwise.

Version 5.35, 4.79.2.159. Tagged as 'Kernel-5_35-4_79_2_159'

Detail:
  hdr/HALEntries - Brought in line with RPi branch, plus addition of new HAL_UARTDefault HAL entry, to allow DualSerial to determine which (if any) of the HAL UARTs should be the default UART accessed via OS_SerialOp
  s/GetAll - Add GET of Hdr:SerialOp
  s/PMF/osbyte - Use OS_SerialOp 10 when constructing filename to open for OS_Byte 2
Admin:
  Tested in OMAP3, Tungsten ROMs


Version 5.35, 4.79.2.152. Tagged as 'Kernel-5_35-4_79_2_152'

The kernel already looks after all other aspects of the ARM CPU, so can look after the cache control command too.
 HelpStrs.s:New tokens for help and syntax
 CmdHelp.s:UK help and syntax
 Arthur3.s:Tables updates for *CONFIGURE/STATUS, lined some stuff up, default error text sync'd with Hdr:NewErrors
 MoreComms.s:Parsing and doing of *CACHE
 Utility.s:Hashing table updated for *CACHE
Other minor changes
 hdr/Options:Bring 'MosVer' into the private header
 hdr/RISCOS:aasm aliases for SP removed, MainVars and MosVer made private, added definition of the start of application space
 HeapMan.s:Use of GRAB changed to Pull
 Offset of TutuCMOS changed for more informative PrintSoundCMOS
 PMF/osbyte.s:Use OsBytes header file in place of MainVars

Version 5.35, 4.79.2.151. Tagged as 'Kernel-5_35-4_79_2_151'

Detail:
  This is a new branch from the current tip of the HAL branch, incorporating
  the changes received from Adrian Lees. The same caveats apply - this is a
  work in progress and will not work on any other platform at present.
Admin:
  Builds, but not tested.

Version 5.35, 4.79.2.147.2.1. Tagged as 'Kernel-5_35-4_79_2_147_2_1'

Convrsions.s:
Don't trash R4 in OS_ConvertDateAndTime
Reject buffer sizes > 2G (seems reasonable for a time string, and allows us to claw back a flag bit).
PMF/osword.s:
Just call Territory_ConvertDateAndTime directly since that's all OS_ConvertDateAndTime does.
Trim some now irrelevant comments and switched out code.

Version 5.35, 4.79.2.144. Tagged as 'Kernel-5_35-4_79_2_144'

On odd numbered versions was coming out as 7F not F7.

Version 5.35, 4.79.2.141. Tagged as 'Kernel-5_35-4_79_2_141'

Detail:
  hdr/OSEntries, s/HAL, s/Kernel - Add compressed ROM support.
  With the current scheme, a compressed ROM will have everything except the HAL and kernel compressed.
  During the keyboard scan period the kernel will allocate some temporary decompression workspace and call the decompression stub that was appended to the ROM.
  The decompression stub is expected to perform in-place decompression of the ROM. Once decompression is complete the workspace will be freed and the page tables updated to make the ROM image readonly.
  It's the HAL's responsibility to make sure any compressed ROM is located in an area of physically contiguous RAM large enough to hold the uncompressed image.
  More info here: http://www.riscosopen.org/wiki/documentation/show/Compressed%20ROMs
  Makefile, h/OSEntries - Add C export of hdr/OSEntries
  hdr/HALDevice - Add device ID for Tungsten video device. Convert tabs to spaces for consistency.
  hdr/HALEntries, s/NewReset - Moved KbdFlag_* definitions to hdr/HALEntries so HALs can use them in their keyboard scan code
  s/ArthurSWIs, S/HAL, s/HeapSort, s/Kernel, s/MemInfo, s/Middle, s/NewIRQs, s/TickEvents, s/vdu/vdugrafb - Make use of BLX, BFI and long multiplies if the CPU supports them. Don't support SWI calls from thumb mode if the CPU doesn't support thumb.
  s/HAL - Made the LDMIA in Init_MapInRAM more sensible (register order was backwards). The old code did work, but wasn't doing what the comments described. Removed unused/unfinished HAL_Write0 function. Improve RISCOS_LogToPhys to check L1PT for any section mappings if the logical_to_physical call fails
  s/ModHand - Save one instruction by using ADR instead of MOV+ADD to compute lr
  s/NewReset, s/PMF/key - Pass L1PT to HAL_Reset to allow machines without hardware reset (e.g. IOMD) to perform resets by manually disabling the MMU and restarting the ROM
  s/vdu/vdudriver, s/vdu/vdugrafv - Use GVEntry macro borrowed from NVidia module for setting up the GraphicsV jump table. Make GraphicsV_ReadPaletteEntry call HAL_Video_ReadPaletteEntry if left unclaimed. Fixup GV_Render to only call HAL_Video_Render if the HAL call is implemented.
Admin:
  Tested with OMAP3, IOMD & Tungsten ROMs/softloads.


Version 5.35, 4.79.2.138. Tagged as 'Kernel-5_35-4_79_2_138'

Export less in hdr:RISCOS.
Delete unused GetDecimalPair routine.
Move CheckYear with other RTC stuff out of PMF/osword.
Hide DebugROMInit and DebugROMErrors in release (even numbered) versions.

Version 5.35, 4.79.2.127. Tagged as 'Kernel-5_35-4_79_2_127'

Delete pmf/convdate, moved to conversions.
Moved OS_BinaryToDecimal to conversions.
Remove OS_ConvertHex16 and friends.
Add OS_ConvertVariform skeleton.
Tidied conversions.

Version 5.35, 4.79.2.125. Tagged as 'Kernel-5_35-4_79_2_125'

Expand tabs.
Swap DCI for instructions now Objasm 4 is out.
Symbols for FSControl_CAT/RUN/OPT changed to non Arthur definitions.
Still boots on IOMD class, no other testing.

Version 5.35, 4.79.2.124. Tagged as 'Kernel-5_35-4_79_2_124'

Detail:
  s/Arthur3, s/ChangeDyn, s/HAL, s/HeapMan, s/Middle, s/MoreSWIs, s/NewIRQs, s/Utility, s/VMSAv6, s/PMF/key, s/PMF/osbyte, s/PMF/osword, s/vdu/vdudecl, s/vdu/vdudriver, s/vdu/vduplot, s/vdu/vduwrch - Tweaked lots of LDM/STM instructions in order to get rid of the depracation/performance warnings
Admin:
  Tested on rev A2 BB-xM


Version 5.35, 4.79.2.98.2.53. Tagged as 'Kernel-5_35-4_79_2_98_2_53'

Detail:
  A whole mass of changes to add high processor vectors + zero page relocation support to the Cortex branch of the kernel
  At the moment the code can only cope with two ZeroPage locations, &0 and &FFFF0000. But with a bit more tweaking those restrictions can probably be lifted, allowing ZeroPage to be hidden at almost any address (assuming it's fixed at compile time). If I've done my job right, these restrictions should all be enforced by asserts.
  There's a new option, HiProcVecs, in hdr/Options to control whether high processor vectors are used. When enabling it and building a ROM, remember:
  * FPEmulator needs to be built with the FPEAnchor=High option specified in the components file (not FPEAnchorType=High as my FPEmulator commit comments suggested)
  * ShareFS needs unplugging/removing since it can't cope with it yet
  * Iyonix users will need to use the latest ROOL boot sequence, to ensure the softloaded modules are compatible (OMAP, etc. don't really softload much so they're OK with older sequences)
  * However VProtect also needs patching to fix a nasty bug there - http://www.riscosopen.org/tracker/tickets/294
  The only other notable thing I can think of is that the ProcessTransfer code in s/ARM600 & s/VMSAv6 is disabled if high processor vectors are in use (it's fairly safe to say that code is obsolete in HAL builds anyway?)
  Fun challenge for my successor: Try setting ZeroPage to &FFFF00FF (or similar) so its value can be loaded with MVN instead of LDR. Then use positive/negative address offsets to access the contents.
  File changes:
  - hdr/ARMops - Modified ARMop macro to take the ZeroPage pointer as a parameter instead of 'zero'
  - hdr/Copro15ops - Corrected $quick handling in myISB macro
  - hdr/Options - Added ideal setting for us to use for HiProcVecs
  - s/AMBControl/allocate, s/AMBControl/growp, s/AMBControl/mapslot, s/AMBControl/memmap, s/AMBControl/service, s/AMBControl/shrinkp, s/Arthur2, s/Arthur3, s/ArthurSWIs, s/ChangeDyn, s/ExtraSWIs, s/HAL, s/HeapMan, s/Kernel, s/MemInfo, s/Middle, s/ModHand, s/MoreSWIs, s/MsgCode, s/NewIRQs, s/NewReset, s/Oscli, s/PMF/buffer, s/PMF/IIC, s/PMF/i2cutils, s/PMF/key, s/PMF/mouse, s/PMF/osbyte, s/PMF/oseven, s/PMF/osinit, s/PMF/osword, s/PMF/oswrch, s/SWINaming, s/Super1, s/SysComms, s/TickEvents, s/Utility, s/vdu/vdu23, s/vdu/vdudriver, s/vdu/vdugrafl, s/vdu/vdugrafv, s/vdu/vdupalxx, s/vdu/vdupointer, s/vdu/vduswis, s/vdu/vduwrch - Lots of updates to deal with zero page relocation
  - s/ARM600 - UseProcessTransfer option. Zero page relocation support. Deleted pre-HAL ClearPhysRAM code to tidy the file up a bit.
  - s/ARMops - Zero page relocation support. Set CPUFlag_HiProcVecs when high vectors are in use.
  - s/KbdResPC - Disable compilation of dead code
  - s/VMSAv6 - UseProcessTransfer option. Zero page relocation support.
Admin:
  Tested with OMAP & Iyonix ROM softloads, both with high & low zero page.
  High zero page hasn't had extensive testing, but boot sequence + ROM apps seem to work.


Version 5.35, 4.79.2.98.2.48. Tagged as 'Kernel-5_35-4_79_2_98_2_48'

Detail:
  Three main changes:
  * On odd-numbered (i.e. development) versions of the module, the UtilityModule will now take its date from the VersionNum file instead of using a hard-coded date
  * All build versions now look for the new "extended ROM footer" (as created by romlinker 0.04+) at the end of the ROM image and use it to determine the ROM build date for return by OS_ReadSysInfo 9,2. Failing to find the build date in the footer will cause OS_ReadSysInfo 9,2 to return 0.
  * On odd-numbered versions, OS_Byte 0 will now use the ROM build date (as found in the extended footer) to generate the error block that's returned to the user. This seems OK as the PRM describes OS_Byte 0 as returning the "creation date of the operating system". Plus it's a convenient way of getting the ROM build date into the Switcher, since the switcher uses OS_Byte 0. If the extended footer can't be found (or if the string isn't initialised yet, e.g. before Service_PostInit) the code falls back to a hard-coded string containing the date from the VersionNum file.
  File changes:
  Makefile - Updated to not create the obsolete Time+Date file (previously used for the ROM build date)
  Version - Use date from VersionNum file for development builds
  hdr/Options - New UseNewFX0Error variable/option to make it easy to check which OS_Byte 0 variant should be enabled
  hdr/KernelWS - Added new string buffers & extended ROM footer pointer to workspace
  s/Middle - Updated OS_ReadSysInfo 9 code, and added utility functions for searching the extended ROM footer for certain tags
  s/NewReset - Added a couple of calls to initialise the new string buffers just prior to Service_PostInit. This is required since OS_Byte/OS_ReadSysInfo shouldn't enable interrupts, but date conversion relies on the Territory module, which may enable interrupts.
  s/PMF/osbyte - Updated OS_Byte 0 code
Admin:
  Tested in Tungsten ROM, with and without the extended footer present.


Version 5.35, 4.79.2.115. Tagged as 'Kernel-5_35-4_79_2_115'

Detail:
  Three main changes:
  * On odd-numbered (i.e. development) versions of the module, the UtilityModule will now take its date from the VersionNum file instead of using a hard-coded date.
  * All build versions now look for the new "extended ROM footer" (as created by romlinker 0.04+) at the end of the ROM image and use it to determine the ROM build date for return by OS_ReadSysInfo 9,2. Failing to find the build date in the footer will cause OS_ReadSysInfo 9,2 to return 0.
  * On odd-numbered versions, OS_Byte 0 will now use the ROM build date (as found in the extended footer) to generate the error block that's returned to the user. This seems OK as the PRM describes OS_Byte 0 as returning the "creation date of the operation system". Plus it's a convenient way of getting the ROM build date into the Switcher, since the switcher uses OS_Byte 0. If the extended footer can't be found (or if the string hasn't been initialised yet, e.g. before Service_PostInit) the code falls back to a hard-coded string containing the date from the VersionNum file.
  File changes:
  Makefile - Updated to not create the obsolete Time+Date file (previously used for the ROM build date)
  Version - Use date from VersionNum file for development builds
  hdr/Options - New UseNewFX0Error variable/option to make it easy to check which OS_Byte 0 variant should be enabled
  hdr/KernelWS - Added new string buffers & extended ROM footer pointer to workspace
  s/Middle - Updated OS_ReadSysInfo 9 code, and added utility functions for searching the extended ROM footer for certain tags
  s/NewReset - Added a couple of calls to initialise the new string buffers just prior to Service_PostInit. This is required since OS_Byte/OS_ReadSysInfo shouldn't enable interrupts, but date conversion relies on the Territory module, which may enable interrupts.
  s/PMF/osbyte - Updated OS_Byte 0 code
Admin:
  Tested in OMAP ROM, with and without the extended footer present.


Version 5.35, 4.79.2.98.2.41. Tagged as 'Kernel-5_35-4_79_2_98_2_41'

Detail:
  hdr/HALDevice - Added device type & ID for new CPUClk device, as used by the new OMAP3 HAL/PortableHAL versions.
  s/PMF/osinit - Disable a block of dead code that was getting compiled in.
Admin:
  Tested on rev C2 BB, rev A2 BB-xM, rev C1 TouchBook
  These changes are needed by the latest OMAP3 HAL & PortableHAL versions.


Version 5.35, 4.79.2.98.2.36. Tagged as 'Kernel-5_35-4_79_2_98_2_36'

Detail:
  s/Middle, s/PMF/osinit - Kernel now passes the buffer pointer to the HAL in R0 instead of R1, for ATPCS compliance.
Admin:
  Tested on rev A2 BB-xM


Version 5.35, 4.79.2.98.2.35. Tagged as 'Kernel-5_35-4_79_2_98_2_35'

Detail:
  OS_ReadSysInfo 10 is left unimplemented since it's a bit fiddly for us.
  OS_ReadSysInfo 11 is compatible with ROL's implementation, exposing HAL_DebugTX and HAL_DebugRX if the HAL provides them.
  See here for 10,11 docs: http://select.riscos.com/prm/core/osreadsysinfo.html
  OS_ReadSysInfo 12 is a new call to return the 'extended machine ID', to allow the HAL to specify the format & validity of the ID.
  If the HAL responds to the new HAL_ExtMachineID call then it's assumed that no old-style machine ID is present. The Kernel will generate an old-style ID using the contents of the extended ID, and use that with OS_ReadSysInfo 2/5.
  New software should use OS_ReadSysInfo 12 in preference to 2/5.
  s/Middle - Updated OS_ReadSysInfo SWI
  s/PMF/osinit - New old-style machine ID initialisation code
  hdr/HALEntries - Added new HAL_ExtMachineID entry
Admin:
  Tested on rev A2 BB-xM


Version 5.35, 4.79.2.98.2.34. Tagged as 'Kernel-5_35-4_79_2_98_2_34'

Detail:
  OS_IICOp (and in turn, RISCOS_IICOpV) now treat the top byte of R1 as containing the IIC bus number, allowing multiple buses to be used.
  hdr/KernelWS - Changed workspace a bit so that the kernel can support up to IICBus_Count buses (currently 3), each with its own IICBus_* block.
  s/HAL - Update Reset_IRQ_Handler to cope with interrupts from all IIC buses instead of just the first. Fix/update RISCOS_IICOpV description.
  s/NewIRQs - Update InitialiseIRQ1Vtable to set up interrupt handlers for all IRQ-supporting IIC buses
  s/NewReset - Get rid of the IICAbort call that was just before IICInit. IICInit now calls IICAbort itself.
  s/PMF/IIC - Bulk of the changes. Code now uses the IICBus_ structures instead of the IICStatus and IICType variables. Re-entrancy code has been updated to take into account the possiblity of multiple buses; when OS_IICOp calls are nested, the IIC transfers will be added to bus-specific queues instead of all going in the same queue. However only one queue will be processed at a time.
  s/ChangeDyn - Workspace shuffling means a couple of MOV's needed to be swapped with LDR's when getting immediate constants
Admin:
  Tested with OMAP & IOMD ROM builds.
  Both high & low-level bus types seem to work OK, along with re-entrancy, both on the same bus and on a different bus.


Version 5.35, 4.79.2.98.2.33. Tagged as 'Kernel-5_35-4_79_2_98_2_33'

Detail:
  s/PMF/i2cutils - Although the code will detect the Philips RTC correctly, it was failing to set the device size in R4, causing CMOS RAM to be misread. This change fixes that.
Admin:
  Not tested; however it's identical to the fix applied to the HAL branch


Version 5.35, 4.79.2.98.2.23. Tagged as 'Kernel-5_35-4_79_2_98_2_23'

Detail:
  s/PMF/i2cutils - Although the code will detect the Philips RTC correctly, it was failing to set the device size in R4, causing CMOS RAM to be misread. This change fixes that.
Admin:
  Tested in IOMD HAL build on development version of RPCEmu.


Version 5.35, 4.79.2.110. Tagged as 'Kernel-5_35-4_79_2_110'

Fix bug in InitCMOSCache that could cause CMOS to be erroneously reset if NVRAM is of type 'MaybeIIC' (Cortex branch)

Detail:
  s/PMF/i2cutils - Kernel was checking if the full IIC flags word was equal to MaybeIIC instead of just checking if the Provision bits equalled MaybeIIC. Thus if any of the additional flags were set along with MaybeIIC the kernel would have skipped the probing code, skipped the IIC code, and then fallen through to using the (likely unimplemented) HAL interface for initialising the NVRAM cache.
Admin:
  Fix tested in HAL branch in IOMD build under RPCemu; kernel now takes the correct path for MaybeIIC + ProtectAtEnd.


Version 5.35, 4.79.2.98.2.22. Tagged as 'Kernel-5_35-4_79_2_98_2_22'

Fix bug in InitCMOSCache that could cause CMOS to be errouneously reset if NVRAM is of type 'MaybeIIC'

Detail:
  s/PMF/i2cutils - Kernel was checking if the full IIC flags word was equal to MaybeIIC instead of just checking if the Provision bits equalled MaybeIIC. Thus if any of the additional flags were set along with MaybeIIC the kernel would have skipped the probing code, skipped the IIC code, and fallen through to using the (likely unimplemented) HAL interface for initialising the NVRAM cache.
Admin:
  Tested in IOMD build under RPCemu; kernel now takes the correct path for MaybeIIC + ProtectAtEnd.


Version 5.35, 4.79.2.109. Tagged as 'Kernel-5_35-4_79_2_109'

Detail:
  s/PMF/osword - Migrate the 2012 RTC fix from the HAL branch to the Cortex branch, plus apply similar fix to the code that handles HAL RTC devices (via new YearLOIsGood flag)
  s/PMF/i2cutils - Update HAL RTC year handling to correctly treat YearLO as either 2-bit int or 2-digit BCD
  hdr/RTCDevice - Add YearLOIsGood flag, revise NeedsYearHelp description
Admin:
  Tested on rev C2 beagleboard. Code seems to behave as intended.


Version 5.35, 4.79.2.98.2.21. Tagged as 'Kernel-5_35-4_79_2_98_2_21'

Also upissued to RISC OS 5.16 to release this in ROM
Detail:
  (list files and functions that have changed)
Admin:
tested at Castle (JB)
  (highlight level of testing that has taken place)
  (bugfix number if appropriate)


Version 5.35, 4.79.2.107. Tagged as 'Kernel-5_35-4_79_2_107'

Detail:
  The kernel will now attempt to cope with errors returned by HAL RTC devices - For RTC read operations, instead of just loading random garbage, the bad result will now be ignored and the soft 5-byte time left unaltered.
Admin:
  Tested on rev C2 beagleboard. Year now correctly defaults to 1970 instead of 1900 if the OMAP3 RTC driver returns an error because the RTC isn't running yet.


Version 5.35, 4.79.2.98.2.13. Tagged as 'Kernel-5_35-4_79_2_98_2_13'

Detail:
  HAL kernels (on the Cortex branch at least) now support HALDevice-based RTCs. If the kernels own RTC code is disabled or fails to detect an RTC, then after HAL_InitDevices is called the HALDevice list will be scanned for any HAL-resident RTC devices.
  Additionally, the RTCSupport flag (in Hdr:Machine.Machine), which was previously TRUE for all HAL kernels, can now be set to FALSE in HAL kernels to disable the kernels own IIC RTC code. This allows the unwanted legacy RTC code to be disabled for machines which are known to use HAL RTCs instead.
  hdr/RTCDevice - new header describing data structures used for HAL RTC device
  hdr/HALDevice - added RTCDevice device type, IIC serial bus type
  hdr/KernelWS - upgraded RTCFitted from a 1 byte field to 4 byte. It now stores either a null value (for no RTC), a value <2048 for an IIC RTC address, or a value >= 2048 for a RTCDevice ptr
  Makefile - added header export of hdr/RTCDevice
  s/GetAll - include hdr/RTCDevice
  s/NewReset - initialise HAL RTC after HAL_InitDevices if required
  s/PMF/i2cutils, s/PMF/osinit, s/PMF/osword - modifications to allow use of HAL RTC (and disallow use of builtin IIC RTC)
Admin:
  Tested on rev C2 beagleboard


Version 5.35, 4.79.2.98.2.11. Tagged as 'Kernel-5_35-4_79_2_98_2_11'