GitLab

Detail:
  s/vdu/vdupointer - The software pointer code was calculating LineLength manually, due to previous kernel versions not storing a copy of the value that would be safe to use during screen redirection.
  Fix the code to use the new DisplayLineLength variable, so that the software pointer will be correct in modes which have row padding.
Admin:
  Tested on Raspberry Pi 3


Version 5.84. Tagged as 'Kernel-5_84'

Detail:
  This change gets rid of the following switches from the source (picking appropriate code paths for a 32bit HAL build):
  * FixCallBacks
  * UseProcessTransfer
  * CanLiveOnROMCard
  * BleedinDaveBell
  * NewStyleEcfs
  * DoVdu23_0_12
  * LCDPowerCtrl
  * HostVdu
  * Print
  * EmulatorSupport
  * TubeInfo
  * AddTubeBashers
  * TubeChar, TubeString, TubeDumpNoStack, TubeNewlNoStack macros
  * FIQDebug
  * VCOstartfix
  * AssemblingArthur (n.b. still defined for safety with anything in Hdr: which uses it, but not used explicitly by the kernel)
  * MouseBufferFix
  * LCDInvert
  * LCDSupport
  * DoInitialiseMode
  * Interruptible32bitModes
  * MouseBufferManager
  * StrongARM (new CacheCleanerHack and InterruptDelay switches added to hdr/Options to cover some functionality that StrongARM previously covered)
  * SAcleanflushbroken
  * StrongARM_POST
  * IrqsInClaimRelease
  * CheckProtectionLink
  * GSWorkspaceInKernelBuffers
  * EarlierReentrancyInDAShrink
  * LongCommandLines
  * ECC
  * NoSPSRcorruption
  * RMTidyDoesNowt
  * RogerEXEY
  * StorkPowerSave
  * DebugForcedReset
  * AssembleKEYV
  * AssemblePointerV
  * ProcessorVectors
  * Keyboard_Type
  Assorted old files have also been deleted.
Admin:
  Identical binary to previous revision for IOMD & Raspberry Pi builds


Version 5.51. Tagged as 'Kernel-5_51'

Detail:
  s/vdu/vdupointer - For any mode where the software pointer is usable, RestorePointer was restoring the software pointer regardless of whether it was in use at the time RemovePointer was called. This would cause both the software & hardware pointers to be briefly enabled at the same time, potentially causing flickering or other glitches. Fix the issue by making sure RestorePointer only restores if the software pointer was actually in use at the time RemovePointer was called. Also, attempt to deal with the situation where the pointer might have moved to a location where the software pointer is no longer required.
  s/Middle - Improve integration of HangWatch with the abort handler - avoid overwriting the top of the SVC stack so that it can be preserved for the HangWatch dump.
Admin:
  Tested on Raspberry Pi


Version 5.35, 4.79.2.270. Tagged as 'Kernel-5_35-4_79_2_270'

Detail:
  This set of changes adds support for rendering software mouse pointers directly in the kernel, rather than requiring graphics drivers to render them themselves as was the case previously.
  If a driver returns from GraphicsV_Features with the 'hardware pointer' bit clear, and a call to GraphicsV_UpdatePointer is returned unclaimed, then the kernel will step in and render a software pointer. This allows selective control over which areas of the screen the software pointer is used (e.g. if hardware only supports its use in some areas)
  hdr/KernelWS - Shrink PointerXEigFactor to 1 byte to free up some space for tracking the display log2bpp. Use 8 words of space for tracking software pointer state.
  s/vdu/vducursoft - Adjust existing the existing calls to the software pointer RemovePointer/RestorePointer functions so that they're called with IRQs enabled
  s/vdu/vdudriver - Keep track of display log2bpp. Claim/release memory needed for restoring pixels under software pointer.
  s/vdu/vdugrafhal - Update HAL_VideoUpdatePointer handling so that 0 can be returned in a1 to indicate the GraphicsV call should be left unclaimed.
  s/vdu/vdupalxx - Trigger updates of the cached software pointer palette whenever it's likely to become invalidated.
  s/vdu/vdupointer - Add software pointer implementation. Relying on a SpriteExtend OS_SpriteOp would be nice, but we're in the background so have to do plotting & unplotting manually. ColourTrans is used to cache the pointer palette colours for the current mode, although we're limited to calling it from a callback.
Admin:
  Tested on Raspberry Pi & BB-xM
  Pointer is very flickery under some circumstances (e.g. running !CloseUp) due to needing to plot/unplot around any VDU driver screen access (as per text cursor). So code may need revising in future once we can trap reads/writes from specific screen memory pages.


Version 5.35, 4.79.2.269. Tagged as 'Kernel-5_35-4_79_2_269'

Detail:
  This set of changes:
  * Adds basic support for multiple GraphicsV drivers, by way of some new OS_ScreenMode reason codes for registering/deregistering, selecting and enumerating drivers (11, 64-68)
  * Tidies up handling of HAL video calls so that the HAL calls will be transformed into a bona fide GraphicsV driver if they're implemented
  * Changes handling of 16bpp gamma table entries so that they're sent to GraphicsV in a generic form instead of in a VIDC-specific form
  * Adds a new GraphicsV call and defines new VIDC list items to allow GraphicsV drivers to utilise the new pixel formats
  File changes:
  * h/VIDCList, hdr/VIDCList, Makefile - Add new header export containing VIDC list type 3 definitions, to avoid repeated definitions in other components
  * Resources/UK/Messages - Add new GraphicsV/OS_ScreenMode error strings and some missing processor type strings
  * hdr/KernelWS - Clean up some pre-GraphicsV definitions, and add new workspace locations for storing the current GraphicsV driver number and the driver list
  * hdr/Options - Remove obsolete InverseTextTransparency option
  * hdr/VduExt - Add VDU variable 192 for storing GraphicsV driver number (same as ROL's VideoV driver number). Remove old 'Flag_*' mode flag definitions (use new 'ModeFlag_*' defintions instead). Add new OS_ScreenMode reason codes.
  * s/ARM600, s/VMSAv6, s/vdu/vdu23, s/vdu/vdugrafa, s/vdu/vdugrafd, s/vdu/vdupalxx, s/vdu/vdupointer, s/vdu/vduwrch - Strip out pre-GraphicsV code. Update GraphicsV code to use correct driver number.
  * s/ArthurSWIs - Pass the default GraphicsV claimant the VduDriverWorkSpace instead of ZeroPage
  * s/Getall - Add Hdr:VIDCList and s/vdu/VduGrafHAL to list of GETs
  * s/NewIRQs - Remove HAL VSync IRQ initialisation, is now handled by grafvhal. Remove old HAL VsyncIRQ entry point, all VSyncs are now handled by VsyncIRQ_ExtEntry.
  * s/PMF/osbyte - Stop OS_Byte 19 waiting forever if no video driver is active
  * s/PMF/osinit - Remove HAL VSync IRQ initialisation, is now handled by grafvhal
  * s/vdu/vducursoft - Use new workspace variable names and flag names
  * s/vdu/vdudecl - Remove old HALDAG_* definitions, GVDAG_* definitions are used instead. Add definition of the per-driver workspace structure and flags.
  * s/vdu/vdudriver - Remove pre-GraphicsV code. Update InitialiseMode to check for and initialise a HAL driver. Use cached driver features word in a few places instead of calling GraphicsV each time. Update PalIndexTable to disable VIDC mangling of 16bpp gamma tables.
  * s/vdu/vdugrafv, s/vdu/vdugrafhal - HAL<->GraphicsV code split off into its own file (vdugrafhal). Default GraphicsV claimant now only deals with VSync events for the active driver.
  * s/vdu/vdumodes - Get rid of old VIDC List type 3 definiton; now in hdr/VIDCList
  * s/vdu/vduswis - Added OS_ScreenMode reason codes 11 and 64-68 for registering, deregistering, selecting and enumerating GraphicsV drivers. Update mode set code to not bother checking if the driver supports the pixel format; instead we assume that the driver's vet mode call will do the check for us.
Admin:
  Tested in Tungsten, IOMD, OMAP3 & BCM2835 ROMs
  Requires HdrSrc-2_38 and updated video driver modes


Version 5.35, 4.79.2.203. Tagged as 'Kernel-5_35-4_79_2_203'

No accepts  r0 = b31-24 set 0
                 b23-16 fully qualified IIC address
                 b15-0  starting offset
            r1 = buffer pointer
            r2 = number of bytes to tranfer
            r4 = b31-24 display number
                 b23-16 head
                 b15-0  reason code (=14)
Now returns r0 = result codes as per HAL_IICTransfer()
            r1 = buffer pointer incremented by number of bytes transferred
            r2 = number of bytes *not* transferred
            r4 = 0
Removed '_' after Video in entry numbers to be consistent with other HAL entry naming, and HAL_VideoFlybackDevice.
Added IICStatus return numbers to Hdr:HALEntries.
Stop calling HAL_MonitorLeadID as only IOMD implemented it - just guess VGA until the graphics driver says otherwise.

Version 5.35, 4.79.2.159. Tagged as 'Kernel-5_35-4_79_2_159'

While the HAL and kernel were being split some temporary macros were used for the bits being worked on, after 12 years of use they're probably safe to adopt.
mjsCallHAL -> CallHAL; mjsAddressHAL -> AddressHAL; mjsHAL -> HAL.
OS_VIDCDividerSWI code now always does NoSuchSWI (had been switched out previously).
File vduhint.s no longer assembled (was empty).


Version 5.35, 4.79.2.150. Tagged as 'Kernel-5_35-4_79_2_150'

Detail:
  This is a new branch from the current tip of the HAL branch, incorporating
  the changes received from Adrian Lees. The same caveats apply - this is a
  work in progress and will not work on any other platform at present.
Admin:
  Builds, but not tested.

Version 5.35, 4.79.2.147.2.1. Tagged as 'Kernel-5_35-4_79_2_147_2_1'

Expand tabs.
Swap DCI for instructions now Objasm 4 is out.
Symbols for FSControl_CAT/RUN/OPT changed to non Arthur definitions.
Still boots on IOMD class, no other testing.

Version 5.35, 4.79.2.124. Tagged as 'Kernel-5_35-4_79_2_124'

Detail:
  A whole mass of changes to add high processor vectors + zero page relocation support to the Cortex branch of the kernel
  At the moment the code can only cope with two ZeroPage locations, &0 and &FFFF0000. But with a bit more tweaking those restrictions can probably be lifted, allowing ZeroPage to be hidden at almost any address (assuming it's fixed at compile time). If I've done my job right, these restrictions should all be enforced by asserts.
  There's a new option, HiProcVecs, in hdr/Options to control whether high processor vectors are used. When enabling it and building a ROM, remember:
  * FPEmulator needs to be built with the FPEAnchor=High option specified in the components file (not FPEAnchorType=High as my FPEmulator commit comments suggested)
  * ShareFS needs unplugging/removing since it can't cope with it yet
  * Iyonix users will need to use the latest ROOL boot sequence, to ensure the softloaded modules are compatible (OMAP, etc. don't really softload much so they're OK with older sequences)
  * However VProtect also needs patching to fix a nasty bug there - http://www.riscosopen.org/tracker/tickets/294
  The only other notable thing I can think of is that the ProcessTransfer code in s/ARM600 & s/VMSAv6 is disabled if high processor vectors are in use (it's fairly safe to say that code is obsolete in HAL builds anyway?)
  Fun challenge for my successor: Try setting ZeroPage to &FFFF00FF (or similar) so its value can be loaded with MVN instead of LDR. Then use positive/negative address offsets to access the contents.
  File changes:
  - hdr/ARMops - Modified ARMop macro to take the ZeroPage pointer as a parameter instead of 'zero'
  - hdr/Copro15ops - Corrected $quick handling in myISB macro
  - hdr/Options - Added ideal setting for us to use for HiProcVecs
  - s/AMBControl/allocate, s/AMBControl/growp, s/AMBControl/mapslot, s/AMBControl/memmap, s/AMBControl/service, s/AMBControl/shrinkp, s/Arthur2, s/Arthur3, s/ArthurSWIs, s/ChangeDyn, s/ExtraSWIs, s/HAL, s/HeapMan, s/Kernel, s/MemInfo, s/Middle, s/ModHand, s/MoreSWIs, s/MsgCode, s/NewIRQs, s/NewReset, s/Oscli, s/PMF/buffer, s/PMF/IIC, s/PMF/i2cutils, s/PMF/key, s/PMF/mouse, s/PMF/osbyte, s/PMF/oseven, s/PMF/osinit, s/PMF/osword, s/PMF/oswrch, s/SWINaming, s/Super1, s/SysComms, s/TickEvents, s/Utility, s/vdu/vdu23, s/vdu/vdudriver, s/vdu/vdugrafl, s/vdu/vdugrafv, s/vdu/vdupalxx, s/vdu/vdupointer, s/vdu/vduswis, s/vdu/vduwrch - Lots of updates to deal with zero page relocation
  - s/ARM600 - UseProcessTransfer option. Zero page relocation support. Deleted pre-HAL ClearPhysRAM code to tidy the file up a bit.
  - s/ARMops - Zero page relocation support. Set CPUFlag_HiProcVecs when high vectors are in use.
  - s/KbdResPC - Disable compilation of dead code
  - s/VMSAv6 - UseProcessTransfer option. Zero page relocation support.
Admin:
  Tested with OMAP & Iyonix ROM softloads, both with high & low zero page.
  High zero page hasn't had extensive testing, but boot sequence + ROM apps seem to work.


Version 5.35, 4.79.2.98.2.48. Tagged as 'Kernel-5_35-4_79_2_98_2_48'

Detail:
 * Stopped calling the broken abort fixup code when running under VMSAv6.
   Might be desirable to update it, possibly farmed out to a separate module -
   still need to think about this.
 * Unaligned load optimisations can now be disabled by the global NoUnaligned
   flag for testing purposes.
 * Extended OS_ReadUnsigned to permit reading of 64-bit unsigned integers.
   See Docs.ReadUnsigned for more details. Also sped it up by using MLA
   (or UMLAL) for most digits rather than repeated addition.
 * Bugfix is OS_GSRead: an uninitialised r0 was being passed to
   OS_ReadUnsigned, causing undesirable effects on rare occasions.
Admin:
  Tested on a rev B7 beagleboard.

Version 5.35, 4.79.2.98.2.8. Tagged as 'Kernel-5_35-4_79_2_98_2_8'

Detail:
  Having scanned the kernel source for unaligned load code fragments which
  would abort on ARMv6 and v7 and not having found any, I took the opportunity
  to give them build-time switches to use unaligned LDR((S)H)/STR(H)
  instructions if built for a new enough platform. Also added a couple of
  cases of LDRSB that will benefit v4 CPUs and a few instances of the v6
  SXTH instruction, but since objasm doesn't yet understand it (and when it
  does, not everyone will have upgraded) they are currently written as
  DCI statements.
  Most of the changes are to OS_Word handlers, which are notorious in that
  their input/output block is not word-aligned.
Admin:
  Not tested, but it should at least build.

Version 5.35, 4.79.2.98.2.6. Tagged as 'Kernel-5_35-4_79_2_98_2_6'

Version 5.35, 4.79.2.48. Tagged as 'Kernel-5_35-4_79_2_48'

further kernel/HAL split work in video area almost-HAL code for VIDC20/IOMD in vdu.vduhint, now almost divorced from kernel workspace tested briefly in Ursula desktop environment

Version 5.35, 4.79.2.4. Tagged as 'Kernel-5_35-4_79_2_4'

partial video changes for kernel/HAL split near-HAL code for VIDC/IOMD in vdu.vduhint briefly tested in Ursula desktop build still some kernel workspace dependency in near-HAL code

Version 5.35, 4.79.2.3. Tagged as 'Kernel-5_35-4_79_2_3'

* Added ARM_IMB and ARM_IMBRange SWIs as recommended by ARMv5.
* Some early prototype HAL bits popped in - a lot of source restructuring still
  to come.
* New debug target creates an AIF image with debug information, and translates
  this into an ASCII object file for the 16702B logic analyser.

Version 5.35, 4.79.2.1. Tagged as 'Kernel-5_35-4_79_2_1'

Details:
  The Kernel will now compile to produce a pure 32-bit system if No26bitCode is
  set to TRUE.
  If No26bitCode is FALSE, then the Kernel will be a standard 26-bit Kernel,
  although some internal changes have taken place to minimise compile
  switches between the two cases. See Docs.32bit for more technical info.

  The hardest part was the flood-fill...

Other changes:
  Pointer shape changes now take place on the next VSync, rather than actually
  WAITING for the VSync. Turning the Hourglass on shouldn't slow your machine
  down by 5% now :)

  Lots of really crusty pre-IOMD code removed.

Admin:
  Tested in 32 and 26-bit forms in a limited desktop build. Basically, this
  will need to see a lot of use to iron out difficulties. I'd like anyone who
  has a non-frozen project to at least attempt using this Kernel.

Version 5.23. Tagged as 'Kernel-5_23'