GitLab

Detail:
  NewReset.s: Remove warning about soft reset, this is not supported any longer
  MsgCode.s: Reload LR after potentially changing mode
  PMF/osinit.s: Delete vestiges of soft reset support
Admin:
  Submission from Timothy Baldwin.

Version 6.07. Tagged as 'Kernel-6_07'

Detail:
  hdr/VduExt:
  - Introduce mode variable 13, for specifying the minimum number of screen banks that are guaranteed to be available. Eventually the kernel will make use of this during mode vetting & selection, to give programs a simple and reliable way of selecting banked screen modes. Currently however it's only supported by VideoOverlay and the corresponding GraphicsV overlay APIs.
  - Extend the mode flags to allow display rotation & flipping to be specified. This is used to indicate that the framebuffer accessed by the CPU is not in the same orientation as what the user is seeing. Again, currently this is only supported by VideoOverlay and the corresponding GraphicsV overlay APIs.
Admin:
  Tested on OMAP3, OMAP4


Version 6.06. Tagged as 'Kernel-6_06'

Detail:
Admin:


Version 6.05. Tagged as 'Kernel-6_05'

Detail:
  The error block checks introduced in Kernel-5_35-4_79_2_313 are generating a few too many false positives and edge cases, so take the safe option of just disabling them rather than trying to tweak the rules further. Error pointers will still be checked, but the content of the error blocks will not.
  hdr/Options - Add CheckErrorBlocks switch so we can easily turn the code back on again in the future if necessary
  s/Kernel - Switch out all the code relating to error number checks, except for the dummy load of the first word of the error block, since that's still useful as a pointer validity check
  hdr/KernelWS - Revise SWIDespatch_Size definition so it's easier for it to cope with the various factors which may affect the despatcher size
Admin:
  Tested on PandaBoard
  Relevant discussion:
  https://www.riscosopen.org/forum/forums/11/topics/11133


Version 6.04. Tagged as 'Kernel-6_04'

Version 6.03. Tagged as 'Kernel-6_03'

Version 6.02. Tagged as 'Kernel-6_02'

Detail:
  Resolve allocation clash for vector &2C.  It appears that RISCOS Ltd used
  this vector in RISC OS 6 without getting it allocated - they really should
  have known better, since Hdr:RISCOS has always one of the header files
  centrally managed and coordinated between the two forks of RISC OS.
  Resolved by moving SeriousErrorV to &2D since it is a relatively recent
  addition (April 2016) and hasn't yet featured in a stable RISC OS 5
  release.
  Also correct some comments elsewhere in Hdr:RISCOS.


Version 6.01. Tagged as 'Kernel-6_01'

Detail:
  s/ChangeDyn - Due to the way that some page flags map to the same bits as (different) DA flags, the Batcall that PMP_PreGrow makes in order to claim the requested page was getting confused and thinking that the special DMA PreGrow handler should be used instead of the DA-specific one (which in this case is a custom one responsible for claiming the right page). Modify PMP_PreGrow so that it only supplies DA flags to the Batcall, and patches in any custom page flags afterwards.
  Also swap magic number for appropriate symbol in PMPGrowHandler.
Admin:
  Tested on BB-xM
  Fixes CAM corruption when a PMP claims a specific page, due to the PMP code and DA code disagreeing about which page should be used


Version 6.00. Tagged as 'Kernel-6_00'

The default OS_Byte value enabled num lock, but this was passed to the keyboard *before* a decision to wipe the CMOS (and hence potentially override it) was made.
This left the LED on until a key was pressed, regardless of the configured state.
Change the default OS_Byte value to be off so there's only one transition (off->on, or off->off), and refresh the keyboard after the validity of CMOS has been made.
Ref: https://www.riscosopen.org/forum/forums/4/topics/10400

Version 5.99. Tagged as 'Kernel-5_99'

This is now a HAL only kernel, and 0x3200000 is most likely somewhere in RAM.

The kernel has no interest in Ethernet, and this prototype is tightly bound to 1 specific platform, so move it to EtherTH's exports instead.
Makefile tidied.

Detail:
  s/Middle - Tweak register dump generation so that it'll attempt to provide sensible R13 & R14 values if the abort came from the same mode that we're handling the abort in. R13 will be adjusted by however much data we've pushed onto the stack, and R14 will be set to &DEADDEAD to indicate that the CPU has corrupted it and we don't know what the original value was.
Admin:
  Tested on BB-xM


Version 5.98. Tagged as 'Kernel-5_98'

When SyncLib-0_04 is used in conjunction with SDIODriver, the exclusive access instructions (instead of SWP) abort when the cache is off, causing the machine to hang if *Cache Off is used.
See A15 TRM section 6.4.5 for the logic.
Copy the A53's known CPU flags to prevent the D cache being turned off.

Version 5.97. Tagged as 'Kernel-5_97'

Detail:
  s/vdu/vdudriver - On startup, initialise all palettes to 0, not just Pal_Blank. Ensures that entries which might not always be explicitly initialised (e.g. pointer) are self-consistent. Also make sure InitialiseMode communicates the pointer palette to the new GV driver, since some components tend to program it in a lazy manner (e.g. Hourglass)
  s/vdu/vdupalxx - Fix UpdateAllPalette setting R4 to 0 on exit. Fix PV_BlankScreen R0 return value to be 0/1 as the comment suggests instead of always being 0 due to GraphicsV calls.
Admin:
  Tested on wandboard
  Fixes incorrect hourglass colours after reset, due to software RAM clear not wiping the kernel's palette (kernel + Hourglass thought old colours were still in use, but IMXVideo hadn't been told any colours yet so was using defaults of 0)


Version 5.96. Tagged as 'Kernel-5_96'

Newly born boards have all 0xFF's in their CMOS (EEPROM), but the new order of keyboard scan did
  Init -> Scan keyboard -> Check (or wipe) CMOS
and would therefore leave 0xFF's in a select few kernel workspace areas and OS_Byte values.
Defer the init which reads CMOS until after the check/wipe step. Only the screen area size is now done early, but MassageScreenSize clamps that properly anyway.

Arthur3.s: Relocate stranded function SetupPrinterBuffer to osinit.
PMF/key.s: Drop support for SoftReset.
PMF/osinit.s: Stuff in hardcoded defaults at early init. Retrieve the proper ones later. Take ownership of SystemSprite/RamFS/Font Manager dynamic areas (deferrable).
vdudriver.s: Use symbolic name.
NewReset.s: Defer SystemSprite/RamFS/Font Manager area creation, MouseInit, Read(Hard)CMOSDefaults until later.
hdr/Options: Delete unused IgnoreVRAM. Remove MaxRAMFS_Size now PMPs make it not useful. Shuffle ARM6Support/XScaleMiniCache/XScaleJTAGDebug to be adjacent to their definitions.

Tested by filling first 256 bytes with 0xFF and powering up. Reset now completes, OS_Byte variables look sensible.

Version 5.95. Tagged as 'Kernel-5_95'

Detail:
  s/vdu/vdugrafl - Disable hardware scrolling if we're in a teletext mode with a border. Quick fix in lieu of adding some code to make sure the relevant border areas are cleared when scrolling.
  s/vdu/vduttx - Ignore VDU 23,18,<n> sequences when outside of teletext. Fixes a crash when screen update suspend/resume sequences are used.
Admin:
  Tested on RiscPC


Version 5.94. Tagged as 'Kernel-5_94'

During the first pass keyboard scan the ROM module nodes are built off the anchor ROMModuleChain.
During the second pass the whole set of ROM module nodes are temporarily constructed anchored on the stack, then switched over.
This caused a problem when a duplicate name module was encountered on a podule (eg. MbufManager in a NIC) because FindROMModule searches from the ROMModuleChain anchor, didn't find a match, so created a new node rather than linking it to the NewerVersion/OlderVersion linked list on the existing node.
Then *Unplug and *RMInsert would say "Module is not in ROM" if the optional podule specifier was given, because the search stopped at the first node with the right name.

Swap round the second pass so it anchors directly on ROMModuleChain, and keeps the first pass anchor on the stack (needed only occasionally to copy over details of modules already initialised).

Tested on a Risc PC with NIC, can now selectively unplug MbufManager again.

Version 5.93. Tagged as 'Kernel-5_93'

Detail:
  s/Oscli:
  - Reorder RemoveOscliCharJobs to avoid WrchV being left claimed while the output stream is being closed, to resolve ticket #420.
  - Register usage also tweaked a bit to make the code a bit shorter & easier to read
  - Fix RedirectWrch to deal with errors correctly. PSR save/restore macros were added to the routine during the 32bit conversion process, but (a) they were inadvertantly causing all errors to be ignored, and (b) they were redundant since WrchV has no special in/out requirements for the PSR flags
Admin:
  Tested on Pandaboard
  Ticket #420 fix based around Colin's fix from https://www.riscosopen.org/forum/forums/4/topics/5269


Version 5.92. Tagged as 'Kernel-5_92'

Detail:
  s/NewReset - In Kernel-5_89, the initial OS_ResyncTime call was erroneously moved to after Service_PostInit, which had the side-effect of causing TerritoryManager's initial evaluation of AutoDST rules to be performed using an uninitialised RTC, with varying side effects depending on the user's timezone (e.g. UK stuck in DST all year round due to lack of BST in 1970). Move the call back to its original location so that TerritoryManager and any other PostInit claimants can see the correct time.
Admin:
  Tested in Iyonix ROM
  Resolves ticket #441


Version 5.91. Tagged as 'Kernel-5_91'

Detail:
  s/MemInfo, hdr/KernelWS - Rather than peeking L2PT to determine if the compatibility page is enabled, use a workspace var to track its state. This ensures we won't get confused if other software decides to map something of its own to &0.
  s/NewReset - Ensure the CompatibilityPageEnabled flag is initialised correctly
Admin:
  Tested in Iyonix ROM softload


Version 5.90. Tagged as 'Kernel-5_90'

Detail:
  To make it easier to support arbitrary complexity keyboard controllers (eg. USB via DWCDriver on the Pi) have the kernel do the early keyboard recovery key press detection instead of the HAL.
  During the first pass those modules used for reading the keyboard are started, ignoring the CMOS frugal bits.
  The keyboard is then scanned for 3s, during which time the RAM is cleared (unless the HAL indicated it has already been done).
  During the second pass the remaining modules are started respecting the CMOS frugal bits. Any which were already started in the first pass are inserted into the new chain, so the keyboard is reset once and only once.

  Boot times, with a 300cs key scan time in NewReset.
  Risc PC with 160MB RAM (128+32+0).
  Times from turning on power to initial "beep", using a stopwatch.
                RISC OS 3.70 RISC OS 5.22 This OS
  ARM610        12.5         10.4         10.3
  ARM710        11.8         10.2         9.7
  StrongARM 233 11.1         9.5          8.4

  In NewReset.s:
  Remove old KbdScan code (leave Reset_IRQ_Handler for IIC only)
  If HAL_KbdScanDependencies returns a null string then present KbdDone flag and skip to full init.
  A few vestiges of soft resets removed.
  Do RAM clear when waiting for INKEY (being careful not to trash the running modules...).
  Clearing just the freepool on a 2GB Titanium cleared 7EFD6 pages (99.2%).

  In ModHand.s:
  2nd pass need to sneaky renumber the nodes (so *ROMModules is in the right order, frugal bits line up) without resetting the chain

  In HAL.s:
  Change ClearPhysRAM to ClearWkspRAM, such that it only clears the kernel workspace rather than all RAM. The bulk of the RAM is cleared during the keyboard scan by new function ClearFreePoolSection.
  Add a variant of Init_MapInRAM which clears the mapped in RAM too (as these very early claims will not be in the free pool when the RAM is cleared later).
  Remove HAL keyboard scan setup & IRQ handler.
  Fix bug in HALDebugHexTX2, the input value needs pre-shifting by 16b before continuing.

  In GetAll.s, PMF/osbyte.s:
  Use Hdr:Countries and Hdr:OsBytes for constants.

  In PMF/key.s, PMF/osinit.s:
  Relocate the key post init from PostInit to KeyPostInit.
  Changed PostInit to not tail call KeyPostInit so they can be called independently.

  In hdr/KernelWs:
  Improve comments, add InitWsStart label to refer to.

  In hdr/HALEntries:
  Add HAL_KbdScanDependencies.
  Delete KbdFlag exports.
  Took the opportunity to reorder some of the higher numbered HAL entries and re-grouping, specifically (112,120) (84,106,108,117).
Admin:
  Tested on an ARM6/ARM7/SA Risc PC, BeagleBoard xM, Iyonix, Pandaboard ES, Wandboard Quad, IPEGv5, Titanium, Pi 2 and 3.
  Requires corresponding HAL change.
  Submission for USB bounty.

Version 5.89. Tagged as 'Kernel-5_89'

Detail:
  Return the calculated checksum from MakeChecksum, like the comment says.
Admin:
  Spotted during code review (not tagged).

OS_ConvertVariform 15 outputs 128b numbers per RFC4122.

Version 5.88. Tagged as 'Kernel-5_88'

Version 5.87. Not tagged

Detail:
  When HiProcVecs is enabled, there will now be a read-only page located at &0 in order to ease compatibility with buggy software which reads from null pointers
  Although most of the page is zero-filled, the start of the page contains a few words which are invalid pointers, discouraging dereferencing them, and a warning message if the memory is interpreted as a string.
  On ARMv6+ the page is also made non-executable, to deal with branch-through-zero type situations
  OS_Memory 20 has been introduced as a way of determining whether the compatibility page is present, and also to enable/disable it
  File changes:
  - hdr/Options - Add CompatibilityPage option
  - hdr/OSMem - Declare OS_Memory reason code 20
  - hdr/KernelWS - When CompatibilityPage is enabled, make sure nothing else is located at &0
  - s/NewReset - Enable compatibility page just before Service_PostInit (try and keep zero-tolerance policy for null pointer dereferencing during ROM init)
  - s/MemInfo - OS_Memory 20 implementation. Add knowledge of the compatibility page to OS_Memory 16 and 24.
Admin:
  Tested on BB-xM


Version 5.87. Tagged as 'Kernel-5_87'

Detail:
Admin:
  tested on iMx6 revD1 and revC2

Version 5.86. Tagged as 'Kernel-5_86'

Detail:
Admin:
  tested on iMx6 revD1 and revC2

Version 5.86. Tagged as 'Kernel-5_86'

Detail:
  Prior to ScreenModes starting (when CurrentMonitorType becaomes 7) this SWI would return Auto as 31 for EDID rather than -1, as would be the case had ReadMultiField been called.
  Change to use -1 for consistency and so it gets translated to type 3 (VGA).
Admin:
  Submission from Willi Theiss.

Version 5.85. Tagged as 'Kernel-5_85'

Detail:
  s/vdu/vdupointer - The software pointer code was calculating LineLength manually, due to previous kernel versions not storing a copy of the value that would be safe to use during screen redirection.
  Fix the code to use the new DisplayLineLength variable, so that the software pointer will be correct in modes which have row padding.
Admin:
  Tested on Raspberry Pi 3


Version 5.84. Tagged as 'Kernel-5_84'

Detail:
  s/vdu/vduswis - Don't use RMVForCurrentMode when R0 = ModeNo, only use it if R0 is -1. This ensures that results for explicitly-specified modes will always represent the base properties of the mode and won't be influenced by any unusual properties of the current mode, e.g. LineLength/ScreenSize alterations caused by driver-specific framebuffer padding.
Admin:
  Tested on Raspberry Pi 3


Version 5.83. Tagged as 'Kernel-5_83'

Detail:
  The ExtraBytes control list item can be used to add padding between framebuffer rows.
  When the kernel sees a VIDC list containing this item, it will now adjust the LineLength and ScreenSize mode variables accordingly, with the end result that the correct amount of memory will be allocated for the framebuffer and the OS will render into it correctly.
  Files changed:
  - hdr/KernelWS - Add DisplayLineLength variable to allow the correct LineLength value to be preserved when screen output is redirected to a sprite
  - s/vdu/vdudriver - Make ModeChangeSub initialise DisplayLineLength before calling SwitchOutputToSprite. Update PushModeInfo to take ExtraBytes into account when calculating LineLength and ScreenSize.
  - s/vdu/vdugrafl - Adjust SwitchOutputToSprite to use DisplayLineLength when restoring screen output
  - s/vdu/vduwrch - Fix full-screen CLS to not write to the padding bytes
Admin:
  Tested on Raspberry Pi 3


Version 5.82. Tagged as 'Kernel-5_82'

Version 5.81. Tagged as 'Kernel-5_81'

Detail:
  Accept a monitortype of 'EDID' (as distinct from 'Auto', which uses the ID pins) to force the kernel, via ScrModes, to use the native screen mode prior to executing the boot sequence.
  Required for discless boot, this also helps if the boot sequence fails, the desktop will be entered in the monitor's native resolution, or a fallback if GraphicsV rejects that.
  The allocation of the EDID monitor type has been carefully selected to degrade to 'Auto' when used with an older OS. That way the configuration in CMOS is safe to use with softloads on top of older physical ROMs.
  When OS_ScreenMode is queried return the 'Auto' type, ie. at an API level there's no distinction.
Admin:
  Requires HdrSrc-2_67.
  Submission for the EDID bounty.

Version 5.80. Tagged as 'Kernel-5_80'

Detail:
  Some closer examination of the PL310 TRM reveals that there's no need to poll for completion of maintenance operations if we only use atomic ops.
  Since there's no particular need for us to use the background ops, just rewrite everything to use the atomic ops and get rid of the polling.
  This should also avoid the need for any costly locking in SMP setups.
  File changes:
  - s/ARMops - Updated as above
Admin:
  Tested on Pandaboard, iMx6


Version 5.79. Tagged as 'Kernel-5_79'

Detail:
  s/Arthur2 - When installing a code system variable, a register fumble resulted in OS_SynchroniseCodeAreas being called with a bogus address range. Fix it.
Admin:
  Tested on Pandaboard


Version 5.78. Tagged as 'Kernel-5_78'

To account for ARM changing their minds about how to clear the exclusive lock on different architectures, provide a function pointer with a known good implementation. This is similar to the run of NOPs returned by OS_PlatformFeatures 0 for those that need it.
If in the future any errata or similar are needed, then there's only 1 place to change it, plus clients don't need their own CPU type detection logic.

Version 5.77. Tagged as 'Kernel-5_77'

Detail:
  s/ChangeDyn - Set r6 bit 0 if the area is smaller than the cache range threshold, because that's what's checked for at lines 3077 and 3092
Admin:
  Tested on Raspberry Pi


Version 5.76. Tagged as 'Kernel-5_76'

Detail:
  s/vdu/vdugrafl, s/vdu/vduttx - Adjust initialisation & shutdown of TTX workspace to fix workspace being erroneously freed/reinitialised when redirecting output to a sprite
  s/vdu/vdugrafk - If ScreenLoad needs to load one row at a time (e.g. when graphics window width != sprite width), allocate a block from the RMA instead of assuming that ScrLoaBuffer is large enough
  hdr/KernelWS - Get rid of ScrLoaBuffer, and shrink LargeCommon to a suitable size. Frees about 2K of VDU workspace.
  s/GetAll - Move Hdr:Sprite earlier in list of GETs
Admin:
  Tested on Raspberry Pi


Version 5.75. Tagged as 'Kernel-5_75'

Detail:
  s/vdu/vdudriver, s/vdu/vdumodes - Re-introduce TTX256 so that 8bpp teletext will be used if no MDF is loaded
  s/vdu/vdudriver - If the video driver didn't support the native mode 7 colour depth, ModePromoTable was swapping it for another mode number, preventing the AltTTX code in FindOKMode from operating. So, skip the ModePromoTable check for mode 7.
  s/vdu/vduswis - Minor correction to alternate teletext mode search; 1<<5 = 32bpp, so stop search at log2bpp of 6
Admin:
  Tested on Raspberry Pi


Version 5.74. Retagged as 'Kernel-5_74'