GitLab

Also enabled the Service_ModulePostInit/Final service calls now that the
service call allocations have been confirmed.

Version 5.35, 4.79.2.54. Tagged as 'Kernel-5_35-4_79_2_54'

Added 256-colour version of the (high-resolution only) teletext code, and support for teletext when hardware scroll is disabled. Both are required for Tungsten.

Turned off the module init/final service calls, since we still don't have an
allocation for them.
Upped the OS version number to 5.01.

Version 5.35, 4.79.2.53. Tagged as 'Kernel-5_35-4_79_2_53'

Detail:
  * Rejigged documented meaning of device "Location" field so that we can
    fit full PCI locations in.
  * Defined lots of device "Type" values in Hdr:HALDevice.
  * Removed obsolete DMA-related HAL entries in Hdr:HALEntries (no longer
    required by DMAManager 0_15-4_4_2_6, no longer provided by Tungsten HAL
    0.07).
  * OS_Hardware 2 and 3 actually work now.
  * Changed OS_Hardware 4 to take a maximum major version number to match.
  * HAL workspace is now USR mode readable.
  * Service calls issued after module initialisation/finalisation (see
    Docs.ModPostServ).
Admin:
  OS_Hardware tested, service calls not tested.

Version 5.35, 4.79.2.52. Tagged as 'Kernel-5_35-4_79_2_52'

Detail:
  Lots of changes since last version, at least the following:
  * Updated OS timestamp, removed alpha status
  * Negative INKEY OS version changed to &AA
  * GraphicsV is now alocated vector number &2A
  * ROM moved up to &FC000000
  * Max application slot increased to 512 Mbytes (for now)
  * Max size of RMA increased to 256 Mbytes
  * RMA is now first-created dynamic area (so it gets lowest address after
    top of application slot)
  * OS_Memory 10 reimplemeted
  * New OS_ReadSysInfo 6 values 18-22 added
  * OS_ReadSysInfo 8 gains flag bit to indicate soft power-off
  * Misc internal top-bit-set-address fixes
  * *ChangeDynamicArea can take sizes in megabytes or gigabytes
  * Magic word "&off" in R0 passed to OS_Reset powers down if possible
  * Added acceleration: block copy; CLS; text window scroll up; rectangle
    fill
  * Disabled LED flashing in page mode (liable to crash)
  * Masked sprite plot and VDU 5 text avoids reading the screen if possible
  * Framestore made USR mode accessible
  * Fix for VDU 5,127 bug - now relies on font definitions being in extreme
    quarters of memory, rather than bottom half
  * Allocated 64-bit OS_Convert... SWIs
  * IIC errors use allocated error numbers
  * Looks for Dallas RTC before Philips RTC because we're using a Philips
    NVRAM device with the same ID
  * Fix to bug that meant the oscillator in the Dallas RTC wasn't enabled
  * Default mouse type (USB) changed to allocated number
  * Ram disc max size increased to 128 Mbytes (Ursula merge) and made
    cacheable for StrongARMs (not XScale)
  * Branch through zero handler now works in USR mode, by use of a
    trampoline in the system stack to allow PC-relative register storage
  * Address exception handler changed to not use 0 as workspace
  * OS_Memory 13 extended to allow specification of cacheability and access
    privileges
  * Added OS_Memory 16 to return important memory addresses
  * RISCOS_MapInIO() takes cacheable flag in bit 3, access permissions in
    bits 10 and 11, doubly-mapped flag in bit 20, and access permissions
    specified flag in bit 21
  * Bug fix in last version for application abort handlers didn't quite
    work; register shuffle required
  * "Module is not 32-bit compatible" error now reports the module name
  * Default configured language changed from 10 to 11 (now Desktop again)

Version 5.35, 4.79.2.51. Tagged as 'Kernel-5_35-4_79_2_51'

Version 5.35, 4.79.2.48. Tagged as 'Kernel-5_35-4_79_2_48'

Ursula. Quite a hairy code merge really, so let's hope it is
worth it to someone. What you get (back after 2 or 3 years):
- much more efficient for largish numbers of DAs (relevance
  to current build = approx 0)
- fancy reason codes to support fast update of
  Switcher bar display (relevance = 0)
- support for clamped maximum area sizes, to avoid address
  space exhaustion with big memory (relevance = 0)
- better implementation of shrinkable DAs, performance
  wise (if lots of DAs, relevance = approx 0)
- support for 'Sparse' DAs. Holey dynamic areas, Batman!
  (relevance, go on someone use the darned things)
Moderately development tested on HAL/32bit ARM9 desktop.
Note the Switcher should be compiled to use the new
reason codes 6&7, for fabled desktop builds.

Also, during this work, so I could see the wood for the
trees, redid some source code clean up, removing pre-Medusa
stuff (like I did about 3 years ago on Ursula, sigh). That's
why loads...

More stuff. Up to the desktop now; cache on, working keyboard. Some source restructuring to start to make splitting it up into several object files more feasible.

* Added ARM_IMB and ARM_IMBRange SWIs as recommended by ARMv5.
* Some early prototype HAL bits popped in - a lot of source restructuring still
  to come.
* New debug target creates an AIF image with debug information, and translates
  this into an ASCII object file for the 16702B logic analyser.

Version 5.35, 4.79.2.1. Tagged as 'Kernel-5_35-4_79_2_1'

  Added common error cache.
Detail:
  Fixed module header validation code which was broken in 5.22.  This
    shouldn't have caused much of a problem as it was only a bizarre
    check (SWI chunk looked valid but SWI handler was 0) that would
    have failed - but be reported as a valid set of SWI entries.
  Added common error message cache.  Several common errors (Buffer
    overflow; Number not recognised; Bad vector release; and a couple
    of others) are now cached the first time they are translated into
    a block of memory in the system heap.
Admin:
  Tested in Ursula build - cacheing only active in Ursula build - change
    HdrSrc if you want it in your products too.
  Requires HdrSrc 0.94

Version 5.31. Tagged as 'Kernel-5_31'

Details:
  The Kernel will now compile to produce a pure 32-bit system if No26bitCode is
  set to TRUE.
  If No26bitCode is FALSE, then the Kernel will be a standard 26-bit Kernel,
  although some internal changes have taken place to minimise compile
  switches between the two cases. See Docs.32bit for more technical info.

  The hardest part was the flood-fill...

Other changes:
  Pointer shape changes now take place on the next VSync, rather than actually
  WAITING for the VSync. Turning the Hourglass on shouldn't slow your machine
  down by 5% now :)

  Lots of really crusty pre-IOMD code removed.

Admin:
  Tested in 32 and 26-bit forms in a limited desktop build. Basically, this
  will need to see a lot of use to iron out difficulties. I'd like anyone who
  has a non-frozen project to at least attempt using this Kernel.

Version 5.23. Tagged as 'Kernel-5_23'

Version 4.84. Tagged as 'Kernel-4_84'

Version 4.83. Tagged as 'Kernel-4_83'

* Integrated Ursula fast service call dispatch code.
* Added Interruptible32bitModes from Ursula.
* Stopped allowing ROM modules (other than the Kernel/UtilityModule) to write
  to the hardware vectors in 26-bit mode.

Version 4.81. Tagged as 'Kernel-4_81'

Fixed typo in OS_Module 21 code. You wouldn't think you could screw up a mere 12 lines of ARM code would you?

Version 4.80. Tagged as 'Kernel-4_80'

Version 4.79. Tagged as 'Kernel-4_79'

CPU type messages internationalised.
"Unknown OS_PlatformFeatures reason code" internationalised.
RunningOnEmul flag tweaked.
MorrisIDString conditional removed.
New modules added to SWI list at the end of the chain, on grounds that
the first-registered modules are probably more important.
*ChangeDynamicArea moved into UtilityModule from TaskManager.

Version 4.65. Tagged as 'Kernel-4_65'