GitLab

Default CMOS tweaks now apply for the RPi hardware. Was missed in
the previous commit.

You can now build the Kernel without the ROM debug output stuff
that's enabled for odd-numbered builds, by passing FREEZE_DEV_REL=TRUE
into the makefile. For example, in the Components file, you'd add:

  -options FREEZE_DEV_REL=TRUE

onto the Kernel line.

Version 5.35, 4.79.2.171. Tagged as 'Kernel-5_35-4_79_2_171'

Detail:
  s/HAL, s/NewReset - Moved IIC initialisation to just after timer initialisation, and crucially, before keyboard scan initialisation. This makes things a lot easier for the HAL if it wants to use IIC during the keyboard scan (previously IIC would be enabled inbetween HAL_KbdScanSetup and the first call to HAL_KbdScan)
  hdr/HALDevice - Added a device ID for the Pandora audio controller
Admin:
  Tested on Pandora


Version 5.35, 4.79.2.168. Tagged as 'Kernel-5_35-4_79_2_168'

Detail:
  hdr/HALDevice - Added new HID device type, Keyboard sub-type, and Pandora keyboard device ID
Admin:
  Tested on Pandora, rev C2 BB, rev A2 BB-xM, rev C1 TouchBook


Version 5.35, 4.79.2.166. Tagged as 'Kernel-5_35-4_79_2_166'

Fix addresses sent to GraphicsV_SetDMAAddress when external framestore in use. Add ID for BCM2835 VDU HAL device.

Detail:
  hdr/KernelWS, s/vdu/vdudriver, s/vdu/vduwrch - Fixed wrong addresses being sent to GraphicsV_SetDMAAddress when an external framestore is in use. Previously VideoPhysAddr was being treated as if it was the base of screen memory, but that's only the case if an internal framestore is in use. Since VideoPhysAddr is part of PhysRamTable it's not possible to change it to point to an external framestore, so a new workspace variable, TrueVideoPhysAddr, is used instead.
  hdr/HALDevice - Added device ID for BCM2835 VDU device
  s/PMF/IIC - Corrected an incorrect comment in IICDoOp
Admin:
  Tested on Raspberry Pi with high processor vectors


Version 5.35, 4.79.2.147.2.22. Tagged as 'Kernel-5_35-4_79_2_147_2_22'

Detail:
  hdr/GPIODevice - Removed existing 'unknown' revision and added 'B rev 1' and 'B rev 2' in its place, ready for new HAL that can report the board revision.
Admin:
  Tested on Raspberry Pi (B rev 1)


Version 5.35, 4.79.2.147.2.21. Tagged as 'Kernel-5_35-4_79_2_147_2_21'

Version 5.35, 4.79.2.147.2.19. Tagged as 'Kernel-5_35-4_79_2_147_2_19'

Detail:
  hdr/HALEntries - Add new HAL_Video_StartupMode HAL entry to allow the HAL to specify a startup mode
  s/HAL, s/Kernel - Tweaked debug routines
  s/vdu/vdudriver - Make use of HAL_Video_StartupMode in InitialiseMode to decide what initial mode should be. Clean up some hacks & debug. Improve handling of external framestores; if bit 5 of GraphicsV_DisplayFeatures r0 is set, the kernel will now allow the display driver to grow/shrink/move its framestore in response to mode changes.
  s/vdu/vdugrafv - Adjust default GV_FramestoreAddress implementation to only claim vector if HAL returns a framestore
  s/vdu/vduswis - Re-enable FindOKMode
Admin:
  Tested on Raspberry Pi with high processor vectors


Version 5.35, 4.79.2.147.2.18. Tagged as 'Kernel-5_35-4_79_2_147_2_18'

Detail:
  hdr/HALDevice - Added new HAL devices and types from RPi branch
Admin:
  Untested!


Version 5.35, 4.79.2.164. Tagged as 'Kernel-5_35-4_79_2_164'

Fix crash in OS_Hardware 4 when encountering devices which are newer than the caller supports. Add new device IDs for Raspberry Pi audio devices.

Detail:
  s/HAL - Fixed crash in OS_Hardware 4 when encountering devices which are newer than the caller supports
  hdr/HALDevice - Added new HAL devices for Raspberry Pi audio devices
Admin:
  Tested on Raspberry Pi with high processor vectors


Version 5.35, 4.79.2.147.2.17. Tagged as 'Kernel-5_35-4_79_2_147_2_17'

Detail:
  hdr/HALDevice - Add new inter-processor communications device type. Add device IDs for Pi/BCM2835 GPIO interface & VCHIQ
  hdr/GPIODevice - Add Raspberry Pi GPIO type & interface revision (currently 'unknown')
Admin:
  Tested in Raspberry Pi ROM with high processor vectors
  New IDs required for BCM2835-0_17


Version 5.35, 4.79.2.147.2.16. Tagged as 'Kernel-5_35-4_79_2_147_2_16'

Detail:
  Revisions Kernel-5_35-4_79_2_153 and Kernel-5_35-4_79_2_161 merged with one
  trivial conflict.
Admin:
  Confirmed that this builds, but not tested on hardware.

Version 5.35, 4.79.2.147.2.15. Tagged as 'Kernel-5_35-4_79_2_147_2_15'

Previously HAL_PhysInfo took one of two routes to get the arrangment table of arrangement table size.
Reorganised to accept a subreason to allow other physical info to be requested.


Version 5.35, 4.79.2.161. Tagged as 'Kernel-5_35-4_79_2_161'

Detail:
  hdr/HALDevice - Added new device IDs used by BCM2835 DMA controller & DMA channels
Admin:
  Tested in BCM2835 ROM


Version 5.35, 4.79.2.147.2.13. Tagged as 'Kernel-5_35-4_79_2_147_2_13'

Detail:
  This functions like OS_Hardware 4, but enumerates devices in the
  chronological order of registration.
Admin:
  Builds, but untested.

Version 5.35, 4.79.2.160. Tagged as 'Kernel-5_35-4_79_2_160'

No accepts  r0 = b31-24 set 0
                 b23-16 fully qualified IIC address
                 b15-0  starting offset
            r1 = buffer pointer
            r2 = number of bytes to tranfer
            r4 = b31-24 display number
                 b23-16 head
                 b15-0  reason code (=14)
Now returns r0 = result codes as per HAL_IICTransfer()
            r1 = buffer pointer incremented by number of bytes transferred
            r2 = number of bytes *not* transferred
            r4 = 0
Removed '_' after Video in entry numbers to be consistent with other HAL entry naming, and HAL_VideoFlybackDevice.
Added IICStatus return numbers to Hdr:HALEntries.
Stop calling HAL_MonitorLeadID as only IOMD implemented it - just guess VGA until the graphics driver says otherwise.

Version 5.35, 4.79.2.159. Tagged as 'Kernel-5_35-4_79_2_159'

Admin:
  Required by HAL/OMAP3 0.68

Version 5.35, 4.79.2.158. Tagged as 'Kernel-5_35-4_79_2_158'

NewReset.s:
The one remaining use of SetBorder was to denote the user asked for and got a CMOS reset, which in the HAL case emitted a warning because setting the border is potentially complicated/slow.
To solve this, the reset is noted and replaces the normal RISC OS banner with a warning message. The behaviour and text for this comes from the BBC Master, though the escape key is used in place of break since a reset isn't actually needed.
Moved the unused cputable inside its corresponding switch.
Two occurrences of WriteS_Translated would have executed the message in the V=1 case.
KernelWS/Resources:
Flag added to workspace, translation added to messages files.
Heapman.s:
Commented out use of SetBorder removed.
Kernel.s:
SetBorder macro removed.
Middle.s:
Switched out use of SetBorder removed.
Super1.s:
Conditional WriteS_Translated would try to execute the message in the opposite condition case.


Version 5.35, 4.79.2.157. Tagged as 'Kernel-5_35-4_79_2_157'

With no VRAM, in Kernerl.s.HAL line 370, the less than 16M case sets aside half the RAM as available for video (more than, it uses no more than 32M) but the exactly equals 16M case set aside none.
Add some exports to hdr.HALEntries to define the subreasons to OS_Hardware.

Version 5.35, 4.79.2.154. Tagged as 'Kernel-5_35-4_79_2_154'

The only fake result now is the hard ROM amount, which is hardwired to 4MB and might not be correct.
Unrelated changes
 hdr.HALDevice: Assign a device for VIDC20.
 hdr.KernelWS: Reorder into ascending order, remove legacy addresses.
 s.ARM600: Move PhysSpaceSize inside :LNOT:HAL switch.
 s.Kernel: Move PhysSpaceSize inside :LNOT:HAL switch.

Version 5.35, 4.79.2.153. Tagged as 'Kernel-5_35-4_79_2_153'

Detail:
  Hdr/HALEntries - Added HAL_UARTDefault entry, as per HAL branch
Admin:
  Untested


Version 5.35, 4.79.2.147.2.9. Tagged as 'Kernel-5_35-4_79_2_147_2_9'

Detail:
  hdr/HALEntries - Brought in line with RPi branch, plus addition of new HAL_UARTDefault HAL entry, to allow DualSerial to determine which (if any) of the HAL UARTs should be the default UART accessed via OS_SerialOp
  s/GetAll - Add GET of Hdr:SerialOp
  s/PMF/osbyte - Use OS_SerialOp 10 when constructing filename to open for OS_Byte 2
Admin:
  Tested in OMAP3, Tungsten ROMs


Version 5.35, 4.79.2.152. Tagged as 'Kernel-5_35-4_79_2_152'

The kernel already looks after all other aspects of the ARM CPU, so can look after the cache control command too.
 HelpStrs.s:New tokens for help and syntax
 CmdHelp.s:UK help and syntax
 Arthur3.s:Tables updates for *CONFIGURE/STATUS, lined some stuff up, default error text sync'd with Hdr:NewErrors
 MoreComms.s:Parsing and doing of *CACHE
 Utility.s:Hashing table updated for *CACHE
Other minor changes
 hdr/Options:Bring 'MosVer' into the private header
 hdr/RISCOS:aasm aliases for SP removed, MainVars and MosVer made private, added definition of the start of application space
 HeapMan.s:Use of GRAB changed to Pull
 Offset of TutuCMOS changed for more informative PrintSoundCMOS
 PMF/osbyte.s:Use OsBytes header file in place of MainVars

Version 5.35, 4.79.2.151. Tagged as 'Kernel-5_35-4_79_2_151'

Detail:
  An undocumented entry condition of TickOne is that r0 contains the device
  number corresponding to Timer0. This must be passed to HAL_IRQClear on
  some platforms.
Admin:
  Tested only on a Raspberry Pi. Also added enumeration of entry numbers in
  comments in Hdr:HALEntries - a handy reference when debugging from the
  command line!

Version 5.35, 4.79.2.147.2.8. Tagged as 'Kernel-5_35-4_79_2_147_2_8'

While the HAL and kernel were being split some temporary macros were used for the bits being worked on, after 12 years of use they're probably safe to adopt.
mjsCallHAL -> CallHAL; mjsAddressHAL -> AddressHAL; mjsHAL -> HAL.
OS_VIDCDividerSWI code now always does NoSuchSWI (had been switched out previously).
File vduhint.s no longer assembled (was empty).


Version 5.35, 4.79.2.150. Tagged as 'Kernel-5_35-4_79_2_150'

  1: Added HAL_FramebufferAddress entry.
  2: Minor mod the NoIrqVecSwiDispatch mods recently submitted. Improved coverage
  3: Added compile time switch InverseTextTransparency to toggle sense of text
  (pre-wimp) for use until correct transparency behaviour is introduced in the RPi
  start.elf.
  4: Ensured that if a non aligned frame buffer is reported, ALL of the space
  is actually mapped in.
Detail:
  (list files and functions that have changed)
Admin:
  builds and runs .. Still needs service_mode extension work to replace hard
  coded mode definition files
  (highlight level of testing that has taken place)
  (bugfix number if appropriate)


Version 5.35, 4.79.2.147.2.5. Tagged as 'Kernel-5_35-4_79_2_147_2_5'

Detail:
  hdr/HALDevice - Add device ID for new SmartReflex-based CPUClk device that takes over from the current OMAP3 one on AM/DM37x devices
Admin:
  Tested in OMAP3 ROM


Version 5.35, 4.79.2.145. Tagged as 'Kernel-5_35-4_79_2_145'

Detail:
  hdr/OSEntries, s/HAL, s/Kernel - Add compressed ROM support.
  With the current scheme, a compressed ROM will have everything except the HAL and kernel compressed.
  During the keyboard scan period the kernel will allocate some temporary decompression workspace and call the decompression stub that was appended to the ROM.
  The decompression stub is expected to perform in-place decompression of the ROM. Once decompression is complete the workspace will be freed and the page tables updated to make the ROM image readonly.
  It's the HAL's responsibility to make sure any compressed ROM is located in an area of physically contiguous RAM large enough to hold the uncompressed image.
  More info here: http://www.riscosopen.org/wiki/documentation/show/Compressed%20ROMs
  Makefile, h/OSEntries - Add C export of hdr/OSEntries
  hdr/HALDevice - Add device ID for Tungsten video device. Convert tabs to spaces for consistency.
  hdr/HALEntries, s/NewReset - Moved KbdFlag_* definitions to hdr/HALEntries so HALs can use them in their keyboard scan code
  s/ArthurSWIs, S/HAL, s/HeapSort, s/Kernel, s/MemInfo, s/Middle, s/NewIRQs, s/TickEvents, s/vdu/vdugrafb - Make use of BLX, BFI and long multiplies if the CPU supports them. Don't support SWI calls from thumb mode if the CPU doesn't support thumb.
  s/HAL - Made the LDMIA in Init_MapInRAM more sensible (register order was backwards). The old code did work, but wasn't doing what the comments described. Removed unused/unfinished HAL_Write0 function. Improve RISCOS_LogToPhys to check L1PT for any section mappings if the logical_to_physical call fails
  s/ModHand - Save one instruction by using ADR instead of MOV+ADD to compute lr
  s/NewReset, s/PMF/key - Pass L1PT to HAL_Reset to allow machines without hardware reset (e.g. IOMD) to perform resets by manually disabling the MMU and restarting the ROM
  s/vdu/vdudriver, s/vdu/vdugrafv - Use GVEntry macro borrowed from NVidia module for setting up the GraphicsV jump table. Make GraphicsV_ReadPaletteEntry call HAL_Video_ReadPaletteEntry if left unclaimed. Fixup GV_Render to only call HAL_Video_Render if the HAL call is implemented.
Admin:
  Tested with OMAP3, IOMD & Tungsten ROMs/softloads.


Version 5.35, 4.79.2.138. Tagged as 'Kernel-5_35-4_79_2_138'

Version 5.35, 4.79.2.131. Tagged as 'Kernel-5_35-4_79_2_131'

Improve heap manager. Add heap testbed. Add dummy implementation of some OS_ScreenMode reason codes.

Detail:
  s/HeapMan, hdr/KernelWS - Heap manager improvements:
    - Errors generated by interrupted heap operations that are forced to complete by a OS_Heap call from the background are now cached in kernel workspace until the foreground task is resumed. This prevents them from being potentially overwritten by MessageTrans running out of background error buffers.
    - Added new OS_Heap reason code, #7 - Get area aligned. This allows areas of memory to be allocated at specific (power-of-2) alignments, and optionally without crossing a given (power-of-2) boundary. Alignment & boundary calculations are performed using logical addresses.
    - Removed the limitation that all free and allocated blocks must be a multiple of 8 bytes in length. This change was required in order to allow OS_Heap 7 to function correctly. Now the only requirements are that blocks must be multiples of 4 bytes in length, at 4 byte alignment, with a minimum length of 8 bytes. 4 extra padding bytes may still be added to the end of allocations in order to avoid creating 4-byte free blocks.
  s/HeapMan, TestSrc/HeapTest/Makefile, TestSrc/HeapTest/c/testbed, TestSrc/HeapTest/s/asm - Added heap testbed program. Can either use the OS_Heap SWI or directly include a copy of the Kernel's heap manager sources.
  s/vdudecl, s/vduswis - Added dummy implementations of OS_ScreenMode 4, 5 and 6. This prevents the Wimp generating lots of "Unknown OS_ScreenMode reason code" errors when redrawing the screen.
  s/Arthur3, s/Oscli - Moved dotstring closer to where it's used to avoid "ADRL out of range" errors in Tungsten build
Admin:
  Tested in OMAP3 ROM & Tungsten ROM softload.
  Heap testbed successfully performed over 400 million heap ops, so there shouldn't be any serious bugs in the new code (touch wood)


Version 5.35, 4.79.2.128. Tagged as 'Kernel-5_35-4_79_2_128'

Export less in hdr:RISCOS.
Delete unused GetDecimalPair routine.
Move CheckYear with other RTC stuff out of PMF/osword.
Hide DebugROMInit and DebugROMErrors in release (even numbered) versions.

Version 5.35, 4.79.2.127. Tagged as 'Kernel-5_35-4_79_2_127'

Delete pmf/convdate, moved to conversions.
Moved OS_BinaryToDecimal to conversions.
Remove OS_ConvertHex16 and friends.
Add OS_ConvertVariform skeleton.
Tidied conversions.

Version 5.35, 4.79.2.125. Tagged as 'Kernel-5_35-4_79_2_125'

Version 5.35, 4.79.2.122. Tagged as 'Kernel-5_35-4_79_2_122'

Version 5.35, 4.79.2.98.2.54. Tagged as 'Kernel-5_35-4_79_2_98_2_54'

Detail:
  hdr/Copro15ops:
    - Fixed incorrect encodings of ISH/ISHST variants of DMB/DSB instructions
  s/ARMops, s/HAL, hdr/KernelWS:
    - Replace the ARMv7 cache maintenance code with the example code from the ARMv7 ARM. This allows it to deal with caches with non power-of-two set/way counts, and caches with only one way.
    - Fixed Analyse_WB_CR7_Lx to use the cache level ID register to work out how many caches to query instead of just looking for a 0 result from CSSIDR.
    - Also only look for 7 cache levels, since level 8 doesn't exist according to the ARMv7 ARM.
  s/NewReset:
    - Removed some incorrect/misleading debug output
Admin:
  Tested on rev A2 BB-xM


Version 5.35, 4.79.2.98.2.51. Tagged as 'Kernel-5_35-4_79_2_98_2_51'

Detail:
  hdr.ARMops
    added Cortex_A9
  hdr.HALDevice
    added OMAP4 specific device IDs
  hdr.KernelWS
    changed definition of DefIRQ1Vspace for M_CortexA9
  s.ARMops
    added CortexA9 specific code for enabling L2 cache
    added CPUDesc Cortex_A9
  s.NewIRQs
    added CortexA9 specific definition of MaxInterrupts
  s.NewReset
    added M_CortexA9 options
    line 1444: corrected typo
    line 187: commented out unnecessary operation
Admin:
  Submission from Willi Theiß

Version 5.35, 4.79.2.98.2.50. Tagged as 'Kernel-5_35-4_79_2_98_2_50'

Detail:
  A whole mass of changes to add high processor vectors + zero page relocation support to the Cortex branch of the kernel
  At the moment the code can only cope with two ZeroPage locations, &0 and &FFFF0000. But with a bit more tweaking those restrictions can probably be lifted, allowing ZeroPage to be hidden at almost any address (assuming it's fixed at compile time). If I've done my job right, these restrictions should all be enforced by asserts.
  There's a new option, HiProcVecs, in hdr/Options to control whether high processor vectors are used. When enabling it and building a ROM, remember:
  * FPEmulator needs to be built with the FPEAnchor=High option specified in the components file (not FPEAnchorType=High as my FPEmulator commit comments suggested)
  * ShareFS needs unplugging/removing since it can't cope with it yet
  * Iyonix users will need to use the latest ROOL boot sequence, to ensure the softloaded modules are compatible (OMAP, etc. don't really softload much so they're OK with older sequences)
  * However VProtect also needs patching to fix a nasty bug there - http://www.riscosopen.org/tracker/tickets/294
  The only other notable thing I can think of is that the ProcessTransfer code in s/ARM600 & s/VMSAv6 is disabled if high processor vectors are in use (it's fairly safe to say that code is obsolete in HAL builds anyway?)
  Fun challenge for my successor: Try setting ZeroPage to &FFFF00FF (or similar) so its value can be loaded with MVN instead of LDR. Then use positive/negative address offsets to access the contents.
  File changes:
  - hdr/ARMops - Modified ARMop macro to take the ZeroPage pointer as a parameter instead of 'zero'
  - hdr/Copro15ops - Corrected $quick handling in myISB macro
  - hdr/Options - Added ideal setting for us to use for HiProcVecs
  - s/AMBControl/allocate, s/AMBControl/growp, s/AMBControl/mapslot, s/AMBControl/memmap, s/AMBControl/service, s/AMBControl/shrinkp, s/Arthur2, s/Arthur3, s/ArthurSWIs, s/ChangeDyn, s/ExtraSWIs, s/HAL, s/HeapMan, s/Kernel, s/MemInfo, s/Middle, s/ModHand, s/MoreSWIs, s/MsgCode, s/NewIRQs, s/NewReset, s/Oscli, s/PMF/buffer, s/PMF/IIC, s/PMF/i2cutils, s/PMF/key, s/PMF/mouse, s/PMF/osbyte, s/PMF/oseven, s/PMF/osinit, s/PMF/osword, s/PMF/oswrch, s/SWINaming, s/Super1, s/SysComms, s/TickEvents, s/Utility, s/vdu/vdu23, s/vdu/vdudriver, s/vdu/vdugrafl, s/vdu/vdugrafv, s/vdu/vdupalxx, s/vdu/vdupointer, s/vdu/vduswis, s/vdu/vduwrch - Lots of updates to deal with zero page relocation
  - s/ARM600 - UseProcessTransfer option. Zero page relocation support. Deleted pre-HAL ClearPhysRAM code to tidy the file up a bit.
  - s/ARMops - Zero page relocation support. Set CPUFlag_HiProcVecs when high vectors are in use.
  - s/KbdResPC - Disable compilation of dead code
  - s/VMSAv6 - UseProcessTransfer option. Zero page relocation support.
Admin:
  Tested with OMAP & Iyonix ROM softloads, both with high & low zero page.
  High zero page hasn't had extensive testing, but boot sequence + ROM apps seem to work.


Version 5.35, 4.79.2.98.2.48. Tagged as 'Kernel-5_35-4_79_2_98_2_48'

Detail:
  hdr/OSRSI6, s/Middle - Added ESC_Status to the list of items that OS_ReadSysInfo 6 exports
Admin:
  Tested in ROM softload on Iyonix


Version 5.35, 4.79.2.121. Tagged as 'Kernel-5_35-4_79_2_121'

Detail:
  hdr/OSRSI6, s/Middle - Added ESC_Status to the list of items that OS_ReadSysInfo 6 exports
Admin:
  Tested on rev A2 BB-xM


Version 5.35, 4.79.2.98.2.47. Tagged as 'Kernel-5_35-4_79_2_98_2_47'

Detail:
  hdr/ARMops - Reserve OS_PlatformFeatures 0 bit 20 for indicating whether high processor vectors are in use
  s/Kernel - Add local definitions of BYTEWS, LDROSB, STROSB, VDWS macros (previously in Hdr:Macros)
  s/MoreComms - Fix potential buffer overflow when filling error buffer (although GSTrans shouldn't overflow the buffer in the first place?)
  s/Arthur2 - GSRead number detection fix
  s/ArthurSWIs - Updated OS_ReadUnsigned to support reading 64bit numbers
  Docs/ReadUnsigned - Docs for the updated OS_ReadUnsigned interface
Admin:
  Untested!
  Needs HdrSrc 1.86


Version 5.35, 4.79.2.120. Tagged as 'Kernel-5_35-4_79_2_120'

Detail:
  hdr/ARMops - Reserve OS_PlatformFeatures 0 bit 20 for indicating whether high processor vectors are in use
  s/Kernel - Add local definitions of BYTEWS, LDROSB, STROSB, VDWS macros (previously in Hdr:Macros)
  s/MoreComms - Fix potential buffer overflow when filling error buffer (although GSTrans shouldn't overflow the buffer in the first place?)
Admin:
  Tested on rev A2 BB-xM
  Requires HdrSrc 1.86


Version 5.35, 4.79.2.98.2.46. Tagged as 'Kernel-5_35-4_79_2_98_2_46'