GitLab

Detail:
  s/vdu/vdupointer - For any mode where the software pointer is usable, RestorePointer was restoring the software pointer regardless of whether it was in use at the time RemovePointer was called. This would cause both the software & hardware pointers to be briefly enabled at the same time, potentially causing flickering or other glitches. Fix the issue by making sure RestorePointer only restores if the software pointer was actually in use at the time RemovePointer was called. Also, attempt to deal with the situation where the pointer might have moved to a location where the software pointer is no longer required.
  s/Middle - Improve integration of HangWatch with the abort handler - avoid overwriting the top of the SVC stack so that it can be preserved for the HangWatch dump.
Admin:
  Tested on Raspberry Pi


Version 5.35, 4.79.2.270. Tagged as 'Kernel-5_35-4_79_2_270'

Detail:
  This set of changes adds support for rendering software mouse pointers directly in the kernel, rather than requiring graphics drivers to render them themselves as was the case previously.
  If a driver returns from GraphicsV_Features with the 'hardware pointer' bit clear, and a call to GraphicsV_UpdatePointer is returned unclaimed, then the kernel will step in and render a software pointer. This allows selective control over which areas of the screen the software pointer is used (e.g. if hardware only supports its use in some areas)
  hdr/KernelWS - Shrink PointerXEigFactor to 1 byte to free up some space for tracking the display log2bpp. Use 8 words of space for tracking software pointer state.
  s/vdu/vducursoft - Adjust existing the existing calls to the software pointer RemovePointer/RestorePointer functions so that they're called with IRQs enabled
  s/vdu/vdudriver - Keep track of display log2bpp. Claim/release memory needed for restoring pixels under software pointer.
  s/vdu/vdugrafhal - Update HAL_VideoUpdatePointer handling so that 0 can be returned in a1 to indicate the GraphicsV call should be left unclaimed.
  s/vdu/vdupalxx - Trigger updates of the cached software pointer palette whenever it's likely to become invalidated.
  s/vdu/vdupointer - Add software pointer implementation. Relying on a SpriteExtend OS_SpriteOp would be nice, but we're in the background so have to do plotting & unplotting manually. ColourTrans is used to cache the pointer palette colours for the current mode, although we're limited to calling it from a callback.
Admin:
  Tested on Raspberry Pi & BB-xM
  Pointer is very flickery under some circumstances (e.g. running !CloseUp) due to needing to plot/unplot around any VDU driver screen access (as per text cursor). So code may need revising in future once we can trap reads/writes from specific screen memory pages.


Version 5.35, 4.79.2.269. Tagged as 'Kernel-5_35-4_79_2_269'

Detail:
  s/vdu/vdudecl - Add a couple more optimisations to LoadCoordPair - use SXTH where possible, and use LDRSH if data is halfword aligned (not currently the case, but may be in future)
  s/vdu/vdugrafj - Fix PreCreateHeader to allow <=256 colour RISC OS 5 sprites to have palettes
Admin:
  Tested on Pandaboard


Version 5.35, 4.79.2.238. Tagged as 'Kernel-5_35-4_79_2_238'

Detail:
  s/vdu/vdugrafk - When saving a new format sprite that would otherwise contain lefthand wastage, copy each screen row to a temporary buffer before saving it out in order to allow the wastage to be removed
Admin:
  Tested on Pandaboard
  Fixes issue reported on forums:
  https://www.riscosopen.org/forum/forums/4/topics/2802


Version 5.35, 4.79.2.237. Tagged as 'Kernel-5_35-4_79_2_237'

Detail:
  s/PMF/osinit, s/vdu/vdudriver - Move GraphicsV_StartupMode call from InitialiseMode to TranslateMonitorLeadType. This means (a) it'll only be used if the CMOS mode is set to 'auto' and (b) the returned mode can more easily be read by other modules via OS_ReadSysInfo 1.
  s/vdu/vduswis - Make OS_CheckModeValid act as if we have practically unlimited screen memory if using a GraphcisV driver with variable external framestore. In this case it's the driver should have already OK'd the memory requirements from within the VetMode call issued by FindOKMode - although the check won't be fully valid if we're checking for a shadow mode as the driver currently isn't told how many screen banks are required.
Admin:
  Tested on Raspberry Pi
  OS_CheckModeValid fix ensures valid modes which require large amounts of VRAM are reported correctly when we're currently in a low-memory mode


Version 5.35, 4.79.2.220. Tagged as 'Kernel-5_35-4_79_2_220'

Detail:
  s/vdu/vdumodes - Redefine VgaX_7 to be VLM_7 if HiResTTX/TTX256 in use
Admin:
  Tested on Raspberry Pi
  Fixes nasty crash when selecting mode 7 without an MDF loaded due to VIDC list being mismatched with code/VWSTAB


Version 5.35, 4.79.2.219. Tagged as 'Kernel-5_35-4_79_2_219'

Detail:
  hdr/VduExt - Define new Service_DisplayChanged reason code for us to issue before anything actually happens. Define new Service_DisplayStatus reason codes for drivers to issue when they change their configuration/capabilities in some way.
  s/Utility - Listen out for Service_DisplayStatus
  s/vdu/vdudriver - When DisplayStatus_Changing/DisplayStatus_Changed is received for the current driver, translate into the appropriate DisplayChanged reason codes so that software which only cares about the current driver doesn't have two sets of service calls to listen out for
  s/vdu/vduswis - When switching driver in OS_ScreenMode 11, issue the new Service_DisplayChanged PreChanging reason code before we update the current GraphicsV driver VDU variable
Admin:
  Tested in Iyonix ROM softload


Version 5.35, 4.79.2.216. Tagged as 'Kernel-5_35-4_79_2_216'

  HAL graphics driver calls.  Added further debug capability
Detail:
  Added additional HAL call. minor code correction in hal graphicsv dispatcher
  Added DebugReg macro to aid debugging
Admin:
  (highlight level of testing that has taken place)
  (bugfix number if appropriate)


Version 5.35, 4.79.2.215. Tagged as 'Kernel-5_35-4_79_2_215'

Fix OS_SpriteOp 41 (read pixel) for 4K colour sprites. Update ECF patterns to work sensibly in true colour modes.

Detail:
  s/vdu/vdugrafg - Change SetupSprModeData to calculate SprReadNColour from log2bpp instead of the NColour mode variable - fixes the alpha component being lost when using OS_SpriteOp 41 to read from 4K colour sprites with alpha channels
  s/vdu/vdudriver - Change SetCol30 to generate more sensible ECF colour blocks when in true colour modes. Previously it would treat each byte of the 8 byte ECF pattern as a separate row, and replicate the byte 4 times to produce one colour word per row. However this isn't so great for true colour modes, especially if you have an alpha channel which needs specific values. So to fix the issue, take inspiration from how Paint assumed the ECF patterns worked, and treat 16bpp modes as being a 1x4 pattern and 32bpp modes as being a 1x2 pattern
Admin:
  Tested on BB-xM
  OS_SpriteOp 41 fix fixes Paint colour picker always returning 0 alpha when picking from 4...

ModeFlag_GreyscalePalette handling improvements. Issue service calls on certain GraphicsV events. Sprite tweaks and fixes.

Detail:
  hdr/VduExt - Add reason codes used by Service_DisplayChanged & Service_DisplayStatus
  s/vdu/vdugrafg - Remove dependency on SpriteReason_BadReasonCode; just use the size of our lookup table instead. Alter SpriteOp lookup table so that unimplemented ops return an error instead of doing nothing. Fix PutSprite incorrectly using the slow GCOL action plotter if a request was made to plot a sprite using its mask but the sprite has none.
  s/vdu/vdugrafl - Update screen redirection handling to set ModeFlag_GreyscalePalette if switching output to a sprite with a greyscale palette or a RISC OS Select alpha mask. Restore the flag to its correct value when restoring screen output.
  s/vdu/vdupalxx - Update ModeFlag_GreyscalePalette in realtime as the palette is changed
  s/vdu/vduswis - Issue Service_DisplayChanged during OS_ScreenMode 11. Issue Service_DisplayStatus during OS_ScreenMode 65 & 66.
Admin:
  Tested on Iyonix, BB-xM


Version 5.35, 4.79.2.210. Tagged as 'Kernel-5_35-4_79_2_210'

Fix dodgy mode changes on Raspberry Pi. Fix crash when switching to a driver which uses DA 2 if DA 2 isn't already large enough.

Detail:
  s/vdu/vdudriver:
  - Fix bug in ModeChangeSub which caused the VariableFramestore flag to be ignored, resulting in unreliable mode changes on the Raspberry Pi.
  - Changed InitialiseMode to reset a few more variables when preparing to use a driver which uses DA 2. Without this the screen DA handler will likely crash when attempting to resize the DA for the initial mode change.
Admin:
  Tested on Raspberry Pi


Version 5.35, 4.79.2.207. Tagged as 'Kernel-5_35-4_79_2_207'

Detail:
  s/MemInfo - Fix OS_Memory 0 physical-to-logical conversion returning bad addresses for most cases due to R5 being modified by physical_to_ppn (bug introduced in revision 4.4.2.20)
  s/vdu/vdudriver - Fix some VDU driver variables not being initialised correctly when switching GraphicsV driver
  s/vdu/vdugrafv - Fix handling of VSync events from GraphicsV drivers other than driver zero
  s/vdu/vduswis - Fix abort when OS_ScreenMode 11 is passed a bad driver number
Admin:
  Tested on Raspberry Pi
  There still seems to be a bug lurking somewhere when switching to a GraphicsV driver that uses DA2; the system will crash horribly unless DA2 is already a suitable size for the initial mode change


Version 5.35, 4.79.2.206. Tagged as 'Kernel-5_35-4_79_2_206'

Detail:
  hdr/Options, s/ArthurSWIs, s/ChangeDyn, s/PMF/KbdDrA1, s/PMF/key, s/vdu/vdugrafa, s/vdu/vdugrafd, s/vdu/vdugrafhal, s/vdu/vdugrafv, s/vdu/vdumodes, s/vdu/vduwrch:
  - Strip out DoingVdu build switch (did nothing)
  - Strip out Japanese16BitSound switch (did nothing)
  - Strip out MakeModeSelectorsForModeNUmbers switch (altered the mode list structures, but there wasn't any code to do anything with the new data)
  - Strip out remaining uses of UseGraphicsV switch (now hardwired to {TRUE})
  - Strip out ShadowROM switch (altered FixedAreasTable to show the shadow mapping, but code to create the mapping is missing)
  - Strip out PollMouse switch (old Archimedes-era debug/development option)
Admin:
  Tested on BB-xM
  Builds to same binary as previous version


Version 5.35, 4.79.2.204. Tagged as 'Kernel-5_35-4_79_2_204'

Detail:
  This set of changes:
  * Adds basic support for multiple GraphicsV drivers, by way of some new OS_ScreenMode reason codes for registering/deregistering, selecting and enumerating drivers (11, 64-68)
  * Tidies up handling of HAL video calls so that the HAL calls will be transformed into a bona fide GraphicsV driver if they're implemented
  * Changes handling of 16bpp gamma table entries so that they're sent to GraphicsV in a generic form instead of in a VIDC-specific form
  * Adds a new GraphicsV call and defines new VIDC list items to allow GraphicsV drivers to utilise the new pixel formats
  File changes:
  * h/VIDCList, hdr/VIDCList, Makefile - Add new header export containing VIDC list type 3 definitions, to avoid repeated definitions in other components
  * Resources/UK/Messages - Add new GraphicsV/OS_ScreenMode error strings and some missing processor type strings
  * hdr/KernelWS - Clean up some pre-GraphicsV definitions, and add new workspace locations for storing the current GraphicsV driver number and the driver list
  * hdr/Options - Remove obsolete InverseTextTransparency option
  * hdr/VduExt - Add VDU variable 192 for storing GraphicsV driver number (same as ROL's VideoV driver number). Remove old 'Flag_*' mode flag definitions (use new 'ModeFlag_*' defintions instead). Add new OS_ScreenMode reason codes.
  * s/ARM600, s/VMSAv6, s/vdu/vdu23, s/vdu/vdugrafa, s/vdu/vdugrafd, s/vdu/vdupalxx, s/vdu/vdupointer, s/vdu/vduwrch - Strip out pre-GraphicsV code. Update GraphicsV code to use correct driver number.
  * s/ArthurSWIs - Pass the default GraphicsV claimant the VduDriverWorkSpace instead of ZeroPage
  * s/Getall - Add Hdr:VIDCList and s/vdu/VduGrafHAL to list of GETs
  * s/NewIRQs - Remove HAL VSync IRQ initialisation, is now handled by grafvhal. Remove old HAL VsyncIRQ entry point, all VSyncs are now handled by VsyncIRQ_ExtEntry.
  * s/PMF/osbyte - Stop OS_Byte 19 waiting forever if no video driver is active
  * s/PMF/osinit - Remove HAL VSync IRQ initialisation, is now handled by grafvhal
  * s/vdu/vducursoft - Use new workspace variable names and flag names
  * s/vdu/vdudecl - Remove old HALDAG_* definitions, GVDAG_* definitions are used instead. Add definition of the per-driver workspace structure and flags.
  * s/vdu/vdudriver - Remove pre-GraphicsV code. Update InitialiseMode to check for and initialise a HAL driver. Use cached driver features word in a few places instead of calling GraphicsV each time. Update PalIndexTable to disable VIDC mangling of 16bpp gamma tables.
  * s/vdu/vdugrafv, s/vdu/vdugrafhal - HAL<->GraphicsV code split off into its own file (vdugrafhal). Default GraphicsV claimant now only deals with VSync events for the active driver.
  * s/vdu/vdumodes - Get rid of old VIDC List type 3 definiton; now in hdr/VIDCList
  * s/vdu/vduswis - Added OS_ScreenMode reason codes 11 and 64-68 for registering, deregistering, selecting and enumerating GraphicsV drivers. Update mode set code to not bother checking if the driver supports the pixel format; instead we assume that the driver's vet mode call will do the check for us.
Admin:
  Tested in Tungsten, IOMD, OMAP3 & BCM2835 ROMs
  Requires HdrSrc-2_38 and updated video driver modes


Version 5.35, 4.79.2.203. Tagged as 'Kernel-5_35-4_79_2_203'

Detail:
  s/vdu/vdugrafh - Fixed SpriteMaskAddr to use the right Log2BPC value when generating addressed for alpha masks. Fix ReadPixelMask to return 255 when sprite has now mask, but mode word has wide mask bit set.
Admin:
  Tested on BB-xM
  Reading/writing alpha mask pixels now works properly across the whole image


Version 5.35, 4.79.2.198. Tagged as 'Kernel-5_35-4_79_2_198'

Fix plotting of RISC OS 5 type sprites and masks. Fix hang when attempting to report "alpha mask not supported" error. Fix reading/writing of alpha mask pixels.

Detail:
  s/vdu/vdugrafg - Fixed PutSprite and PlotMask to correctly deal with RISC OS 5 type sprite mode words. Fix infinite loops in PutSpriWideMaskErr casued by R14 getting trashed.
  s/vdu/vdugrafh - Fixed SpriteMaskAddr malfunctioning when trying to calculate addresses in alpha masks. Minor ReadPixelMask & WritePixelMask optimisations.
  s/vdu/vduswis - Fixed OS_ScreenMode 13 & 14 to count "G2" as a valid colour specifier.
Admin:
  Tested on BB-xM
  Should hopefully fix the random hangs reported on the forums when trying to use sprites with alpha masks


Version 5.35, 4.79.2.197. Tagged as 'Kernel-5_35-4_79_2_197'

Detail:
  s/vdu/vduswis - Add an extra LTORG that's within range of LDR r14,=&1FFF instruction
Admin:
  Tested in Iyonix softload
  Fixes build errors for Tungsten ROM, should fix IOMD + BCM2835 too.


Version 5.35, 4.79.2.195. Tagged as 'Kernel-5_35-4_79_2_195'

Add support for the new RISC OS 5 style sprite mode word. Add partial support for alpha channel sprite masks. Implement OS_ScreenMode reasons 13-15

Detail:
  ECFShift/ECFYOffset:
  - hdr/PublicWS - Add ECFShift and ECFYOffset to list of public exports (SpriteExtend was using hardcoded values). Rearrange exports so that VduWorkspace exports are now labelled as such.
  - hdr/KernelWS - Make sure ECFShift & ECFYOffset match their exported locations
  - hdr/OSRSI6, s/Middle - Add OS_ReadSysInfo 6 items 83 & 84, for reading ECFYOffset and ECFShift locations
  Mode flags/VDU variables:
  - Makefile - Add hdr/VduExt to the C header exports
  - hdr/VduExt - Get rid of NotRVVTBarWobblyBits macro and defined VDU variables manually so that Hdr2H will handle them. Begin replacing overly generic 'Flag_*' mode flag definitions with 'ModeFlag_*' instead. Define new flags as required by the new screen/sprite modes. Add OS_ScreenMode reason codes and mode selector format (from s.vdu.vdudecl)
  - NewModes/NEWF2, NewModes/O...

Detail:
  Briefly, this set of changes:
  * Adjusts PhysRamTable so that it retains the flags passed in by the HAL from OS_AddRAM (by storing them in the lower 12 bits of the size field)
  * Sorts the non-VRAM entries of PhysRamTable by speed and DMA capability, to ensure optimal memory allocation during OS startup.
  * Adjust the initial memory allocation logic to allow the cursor/sound chunk and HAL noncacheable workspace to come from DMA capable memory
  * Extends OS_Memory 12 to accept a 'must be DMA capable' flag in bit 8 of R0. This is the same as available in ROL's OS.
  * Extends OS_DynamicArea 0 to allow the creation of dynamic areas that automatically allocate from DMA capable memory. In ROL's OS this was done by setting bit 12 of R4, but we're using bits 12-14 for specifying the cache policy, so instead bit 15 is used.
  * Fixes OS_ReadSysInfo 6 to return the correct DevicesEnd value now that the IRQ/device limit is computed at runtime
  File changes:
  * hdr/OSEntries - Add definitions of the various flags passed to OS_AddRAM by the HAL. Add a new flag, NoDMA, for memory which can't be used for DMA.
  * hdr/KernelWS - Tidy PhysRamTable definition a bit by removing all the DRAM bank definitions except the first - this makes it easier to search for code which is interacting with the table. Remove VRAMFlags, it's redundant now that the flags are kept in the table. Add DMA allocation info to InitWs.
  * s/AMBControl/memmap - Updated to mask out the flags from PhysRamTable when reading RAM block sizes.
  * s/ARM600 - Strip out a lot of IOMD specific pre-HAL code.
  * s/ChangeDyn - Updated to cope with the flags stored in PhysRamTable. Implement support for DMA-capable dynamic areas. Rewrite InitDynamicAreas to insert pages into the free pool in the right order so that the fastest memory will be taken from it first.
  * s/GetAll, s/Middle - Fix OS_ReadSysInfo 6 to return the correct HAL-specific DevicesEnd value
  * s/HAL - Significant rework of initial RAM allocation code to allow the kernel workspace to come from the fastest DMA incapable RAM, while also allowing allocation of DMA capable memory for HAL NCNB workspace & kernel cursor/sound chunks. ClearPhysRAM rewritten as part of this.
  * s/MemInfo - Updated to cope with the flags stored in PhysRamTable. Add support for the new OS_Memory 12 flag. Update OS_Memory 7 to not assume PhysRamTable entries are sorted in address order, and rip out the old pre-HAL IOMD implementation.
  * s/NewReset - Remove GetPagesFromFreePool option, assume TRUE (as this has been the case for the past 10+ years). Revise a few comments and strip dead code. Update to cope with PhysRamTable flags.
  * s/VMSAv6 - Remove a couple of unused definitions
  * s/vdu/vdudriver - Update to cope with PhysRamTable flags
Admin:
  Tested in Kinetic RiscPC ROM softload, Iyonix softload, & OMAP3


Version 5.35, 4.79.2.186. Tagged as 'Kernel-5_35-4_79_2_186'

Detail:
  s/vdu/vducursoft - TeletextFlashTest now stores the updated TeletextCount before calling SetVinit. This provides some protection against getting stuck in an infinite loop (+ stack overflow) if SetVinit takes longer than 1 VSync to complete (or some other catastrophe occurs)
Admin:
  Tested on Raspberry Pi


Version 5.35, 4.79.2.179. Tagged as 'Kernel-5_35-4_79_2_179'

Temporary assignment changed to one from Hdr:NewErrors.

Version 5.35, 4.79.2.176. Tagged as 'Kernel-5_35-4_79_2_176'

Variously the call to TranslateError was either followed (outside the switch) by an unnecessary SETV, or missing SETV for the non international case.
Added DMA controller HAL device for IOMD.

Version 5.35, 4.79.2.174. Tagged as 'Kernel-5_35-4_79_2_174'

Fix addresses sent to GraphicsV_SetDMAAddress when external framestore in use. Add ID for BCM2835 VDU HAL device.

Detail:
  hdr/KernelWS, s/vdu/vdudriver, s/vdu/vduwrch - Fixed wrong addresses being sent to GraphicsV_SetDMAAddress when an external framestore is in use. Previously VideoPhysAddr was being treated as if it was the base of screen memory, but that's only the case if an internal framestore is in use. Since VideoPhysAddr is part of PhysRamTable it's not possible to change it to point to an external framestore, so a new workspace variable, TrueVideoPhysAddr, is used instead.
  hdr/HALDevice - Added device ID for BCM2835 VDU device
  s/PMF/IIC - Corrected an incorrect comment in IICDoOp
Admin:
  Tested on Raspberry Pi with high processor vectors


Version 5.35, 4.79.2.147.2.22. Tagged as 'Kernel-5_35-4_79_2_147_2_22'

Detail:
  Docs/RPiNotes - Deleted, contents no longer relevant
  s/HAL, s/Kernel, s/vdu/vduswis, s/pmf/key - Cleaned up debug code
  s/NewIRQs - No need to piggy back on timer 0 IRQ to generate a fake VSync; PushModeInfo already claims/releases TickerV as appropriate if video driver doesn't provide a VSync IRQ.
  s/NewReset - Re-enable LookForHALRTC call, the stack imbalance bug was fixed before the Pi changes were merged in
  s/vdu/vducursoft - Streamline PostWrchCursor a bit by only preserving R14 around RestorePointer if the software pointer is in use
  s/vdu/vdudriver - Amend ModeChangeSub improvements to ensure old external framestore handling logic is used if driver doesn't support framestore growth/realloc
Admin:
  Tested on Raspberry Pi with high processor vectors
  Kernel now looks to be in a good state for merging back into HAL branch
  Note - Software mouse pointer support in vducursoft only checks HALVideoFeatures, so doesn't take into account the capabilities of any GraphicsV driver that may be in use.


Version 5.35, 4.79.2.147.2.20. Tagged as 'Kernel-5_35-4_79_2_147_2_20'

Detail:
  hdr/HALEntries - Add new HAL_Video_StartupMode HAL entry to allow the HAL to specify a startup mode
  s/HAL, s/Kernel - Tweaked debug routines
  s/vdu/vdudriver - Make use of HAL_Video_StartupMode in InitialiseMode to decide what initial mode should be. Clean up some hacks & debug. Improve handling of external framestores; if bit 5 of GraphicsV_DisplayFeatures r0 is set, the kernel will now allow the display driver to grow/shrink/move its framestore in response to mode changes.
  s/vdu/vdugrafv - Adjust default GV_FramestoreAddress implementation to only claim vector if HAL returns a framestore
  s/vdu/vduswis - Re-enable FindOKMode
Admin:
  Tested on Raspberry Pi with high processor vectors


Version 5.35, 4.79.2.147.2.18. Tagged as 'Kernel-5_35-4_79_2_147_2_18'

No accepts  r0 = b31-24 set 0
                 b23-16 fully qualified IIC address
                 b15-0  starting offset
            r1 = buffer pointer
            r2 = number of bytes to tranfer
            r4 = b31-24 display number
                 b23-16 head
                 b15-0  reason code (=14)
Now returns r0 = result codes as per HAL_IICTransfer()
            r1 = buffer pointer incremented by number of bytes transferred
            r2 = number of bytes *not* transferred
            r4 = 0
Removed '_' after Video in entry numbers to be consistent with other HAL entry naming, and HAL_VideoFlybackDevice.
Added IICStatus return numbers to Hdr:HALEntries.
Stop calling HAL_MonitorLeadID as only IOMD implemented it - just guess VGA until the graphics driver says otherwise.

Version 5.35, 4.79.2.159. Tagged as 'Kernel-5_35-4_79_2_159'

While the HAL and kernel were being split some temporary macros were used for the bits being worked on, after 12 years of use they're probably safe to adopt.
mjsCallHAL -> CallHAL; mjsAddressHAL -> AddressHAL; mjsHAL -> HAL.
OS_VIDCDividerSWI code now always does NoSuchSWI (had been switched out previously).
File vduhint.s no longer assembled (was empty).


Version 5.35, 4.79.2.150. Tagged as 'Kernel-5_35-4_79_2_150'

  1: Added HAL_FramebufferAddress entry.
  2: Minor mod the NoIrqVecSwiDispatch mods recently submitted. Improved coverage
  3: Added compile time switch InverseTextTransparency to toggle sense of text
  (pre-wimp) for use until correct transparency behaviour is introduced in the RPi
  start.elf.
  4: Ensured that if a non aligned frame buffer is reported, ALL of the space
  is actually mapped in.
Detail:
  (list files and functions that have changed)
Admin:
  builds and runs .. Still needs service_mode extension work to replace hard
  coded mode definition files
  (highlight level of testing that has taken place)
  (bugfix number if appropriate)


Version 5.35, 4.79.2.147.2.5. Tagged as 'Kernel-5_35-4_79_2_147_2_5'

Detail:
  This is a new branch from the current tip of the HAL branch, incorporating
  the changes received from Adrian Lees. The same caveats apply - this is a
  work in progress and will not work on any other platform at present.
Admin:
  Builds, but not tested.

Version 5.35, 4.79.2.147.2.1. Tagged as 'Kernel-5_35-4_79_2_147_2_1'

Detail:
  s/vdu/vdumodes - Mode 47 is 360 pixels wide, so should be 45 text columns, not 90
Admin:
  Tested in Iyonix ROM softload


Version 5.35, 4.79.2.140. Tagged as 'Kernel-5_35-4_79_2_140'

Detail:
  hdr/OSEntries, s/HAL, s/Kernel - Add compressed ROM support.
  With the current scheme, a compressed ROM will have everything except the HAL and kernel compressed.
  During the keyboard scan period the kernel will allocate some temporary decompression workspace and call the decompression stub that was appended to the ROM.
  The decompression stub is expected to perform in-place decompression of the ROM. Once decompression is complete the workspace will be freed and the page tables updated to make the ROM image readonly.
  It's the HAL's responsibility to make sure any compressed ROM is located in an area of physically contiguous RAM large enough to hold the uncompressed image.
  More info here: http://www.riscosopen.org/wiki/documentation/show/Compressed%20ROMs
  Makefile, h/OSEntries - Add C export of hdr/OSEntries
  hdr/HALDevice - Add device ID for Tungsten video device. Convert tabs to spaces for consistency.
  hdr/HALEntries, s/NewReset - Moved KbdFlag_* definitions to hdr/HALEntries so HALs can use them in their keyboard scan code
  s/ArthurSWIs, S/HAL, s/HeapSort, s/Kernel, s/MemInfo, s/Middle, s/NewIRQs, s/TickEvents, s/vdu/vdugrafb - Make use of BLX, BFI and long multiplies if the CPU supports them. Don't support SWI calls from thumb mode if the CPU doesn't support thumb.
  s/HAL - Made the LDMIA in Init_MapInRAM more sensible (register order was backwards). The old code did work, but wasn't doing what the comments described. Removed unused/unfinished HAL_Write0 function. Improve RISCOS_LogToPhys to check L1PT for any section mappings if the logical_to_physical call fails
  s/ModHand - Save one instruction by using ADR instead of MOV+ADD to compute lr
  s/NewReset, s/PMF/key - Pass L1PT to HAL_Reset to allow machines without hardware reset (e.g. IOMD) to perform resets by manually disabling the MMU and restarting the ROM
  s/vdu/vdudriver, s/vdu/vdugrafv - Use GVEntry macro borrowed from NVidia module for setting up the GraphicsV jump table. Make GraphicsV_ReadPaletteEntry call HAL_Video_ReadPaletteEntry if left unclaimed. Fixup GV_Render to only call HAL_Video_Render if the HAL call is implemented.
Admin:
  Tested with OMAP3, IOMD & Tungsten ROMs/softloads.


Version 5.35, 4.79.2.138. Tagged as 'Kernel-5_35-4_79_2_138'

Improve heap manager. Add heap testbed. Add dummy implementation of some OS_ScreenMode reason codes.

Detail:
  s/HeapMan, hdr/KernelWS - Heap manager improvements:
    - Errors generated by interrupted heap operations that are forced to complete by a OS_Heap call from the background are now cached in kernel workspace until the foreground task is resumed. This prevents them from being potentially overwritten by MessageTrans running out of background error buffers.
    - Added new OS_Heap reason code, #7 - Get area aligned. This allows areas of memory to be allocated at specific (power-of-2) alignments, and optionally without crossing a given (power-of-2) boundary. Alignment & boundary calculations are performed using logical addresses.
    - Removed the limitation that all free and allocated blocks must be a multiple of 8 bytes in length. This change was required in order to allow OS_Heap 7 to function correctly. Now the only requirements are that blocks must be multiples of 4 bytes in length, at 4 byte alignment, with a minimum length of 8 bytes. 4 extra padding bytes may still be added to the end of allocations in order to avoid creating 4-byte free blocks.
  s/HeapMan, TestSrc/HeapTest/Makefile, TestSrc/HeapTest/c/testbed, TestSrc/HeapTest/s/asm - Added heap testbed program. Can either use the OS_Heap SWI or directly include a copy of the Kernel's heap manager sources.
  s/vdudecl, s/vduswis - Added dummy implementations of OS_ScreenMode 4, 5 and 6. This prevents the Wimp generating lots of "Unknown OS_ScreenMode reason code" errors when redrawing the screen.
  s/Arthur3, s/Oscli - Moved dotstring closer to where it's used to avoid "ADRL out of range" errors in Tungsten build
Admin:
  Tested in OMAP3 ROM & Tungsten ROM softload.
  Heap testbed successfully performed over 400 million heap ops, so there shouldn't be any serious bugs in the new code (touch wood)


Version 5.35, 4.79.2.128. Tagged as 'Kernel-5_35-4_79_2_128'

Export less in hdr:RISCOS.
Delete unused GetDecimalPair routine.
Move CheckYear with other RTC stuff out of PMF/osword.
Hide DebugROMInit and DebugROMErrors in release (even numbered) versions.

Version 5.35, 4.79.2.127. Tagged as 'Kernel-5_35-4_79_2_127'

Implement OS_ConvertVariform, internally the other conversions now just call it.
Add tester for Variform to 'Dev'.
Made block copy weirdness for XScale dependent on XScale arch flag.

Version 5.35, 4.79.2.126. Tagged as 'Kernel-5_35-4_79_2_126'

Expand tabs.
Swap DCI for instructions now Objasm 4 is out.
Symbols for FSControl_CAT/RUN/OPT changed to non Arthur definitions.
Still boots on IOMD class, no other testing.

Version 5.35, 4.79.2.124. Tagged as 'Kernel-5_35-4_79_2_124'

Detail:
  s/Arthur3, s/ChangeDyn, s/HAL, s/HeapMan, s/Middle, s/MoreSWIs, s/NewIRQs, s/Utility, s/VMSAv6, s/PMF/key, s/PMF/osbyte, s/PMF/osword, s/vdu/vdudecl, s/vdu/vdudriver, s/vdu/vduplot, s/vdu/vduwrch - Tweaked lots of LDM/STM instructions in order to get rid of the depracation/performance warnings
Admin:
  Tested on rev A2 BB-xM


Version 5.35, 4.79.2.98.2.53. Tagged as 'Kernel-5_35-4_79_2_98_2_53'

Detail:
  A whole mass of changes to add high processor vectors + zero page relocation support to the Cortex branch of the kernel
  At the moment the code can only cope with two ZeroPage locations, &0 and &FFFF0000. But with a bit more tweaking those restrictions can probably be lifted, allowing ZeroPage to be hidden at almost any address (assuming it's fixed at compile time). If I've done my job right, these restrictions should all be enforced by asserts.
  There's a new option, HiProcVecs, in hdr/Options to control whether high processor vectors are used. When enabling it and building a ROM, remember:
  * FPEmulator needs to be built with the FPEAnchor=High option specified in the components file (not FPEAnchorType=High as my FPEmulator commit comments suggested)
  * ShareFS needs unplugging/removing since it can't cope with it yet
  * Iyonix users will need to use the latest ROOL boot sequence, to ensure the softloaded modules are compatible (OMAP, etc. don't really softload much so they're OK with older sequences)
  * However VProtect also needs patching to fix a nasty bug there - http://www.riscosopen.org/tracker/tickets/294
  The only other notable thing I can think of is that the ProcessTransfer code in s/ARM600 & s/VMSAv6 is disabled if high processor vectors are in use (it's fairly safe to say that code is obsolete in HAL builds anyway?)
  Fun challenge for my successor: Try setting ZeroPage to &FFFF00FF (or similar) so its value can be loaded with MVN instead of LDR. Then use positive/negative address offsets to access the contents.
  File changes:
  - hdr/ARMops - Modified ARMop macro to take the ZeroPage pointer as a parameter instead of 'zero'
  - hdr/Copro15ops - Corrected $quick handling in myISB macro
  - hdr/Options - Added ideal setting for us to use for HiProcVecs
  - s/AMBControl/allocate, s/AMBControl/growp, s/AMBControl/mapslot, s/AMBControl/memmap, s/AMBControl/service, s/AMBControl/shrinkp, s/Arthur2, s/Arthur3, s/ArthurSWIs, s/ChangeDyn, s/ExtraSWIs, s/HAL, s/HeapMan, s/Kernel, s/MemInfo, s/Middle, s/ModHand, s/MoreSWIs, s/MsgCode, s/NewIRQs, s/NewReset, s/Oscli, s/PMF/buffer, s/PMF/IIC, s/PMF/i2cutils, s/PMF/key, s/PMF/mouse, s/PMF/osbyte, s/PMF/oseven, s/PMF/osinit, s/PMF/osword, s/PMF/oswrch, s/SWINaming, s/Super1, s/SysComms, s/TickEvents, s/Utility, s/vdu/vdu23, s/vdu/vdudriver, s/vdu/vdugrafl, s/vdu/vdugrafv, s/vdu/vdupalxx, s/vdu/vdupointer, s/vdu/vduswis, s/vdu/vduwrch - Lots of updates to deal with zero page relocation
  - s/ARM600 - UseProcessTransfer option. Zero page relocation support. Deleted pre-HAL ClearPhysRAM code to tidy the file up a bit.
  - s/ARMops - Zero page relocation support. Set CPUFlag_HiProcVecs when high vectors are in use.
  - s/KbdResPC - Disable compilation of dead code
  - s/VMSAv6 - UseProcessTransfer option. Zero page relocation support.
Admin:
  Tested with OMAP & Iyonix ROM softloads, both with high & low zero page.
  High zero page hasn't had extensive testing, but boot sequence + ROM apps seem to work.


Version 5.35, 4.79.2.98.2.48. Tagged as 'Kernel-5_35-4_79_2_98_2_48'

Update VDU HAL device for new OMAPVideo driver, fix MVA-based cache/TLB maintenance ops aborting on ARMv7, add warning to VDU driver about inconsistent state variables during screen mode changes

Detail:
  hdr/VideoDevice - removed Address2 and Device2 fields as it makes more sense for them to be in the device specific field (which for OMAP3 is a pointer to an OMAP3-specific struct)
  s/VMSAv6 - Modify data abort handler to ignore aborts that are generated by MVA-based cache/TLB maintenance ops. Unlike earlier ARM architectures, MVA-based ops can abort under ARMv7 if the page has no mapping to a physical address.
  s/vdu/vdudriver - Add a warning about VDU driver state variables (particularly CursorAddr) being left in invalid states during the execution of mode changes. This can cause problems if any attempt is made to output to the screen during the mode change (e.g. as a result of an abort)
Admin:
  Tested on rev C2 beagleboard. Video device changes mean that OMAP3 HAL 0.23 will be needed for ROM compilation to succeed.


Version 5.35, 4.79.2.98.2.24. Tagged as 'Kernel-5_35-4_79_2_98_2_24'