GitLab

Version 0.26. Tagged as 'NetBSD-0_26'

Detail:
  * All modules will now rmkill/rmload more reliably
  * Keyboard driver disables kernel debounce on new enough kernels, needed
    for many PS2-USB adaptors, bar code scanners etc
  * Mouse driver will scroll wheel scroll any windows that do respond to
    scroll events, otherwise it issues PointerReason_WheelChange (9) to an
    external WimpScroll module
  * Several bugs and an interrupt hole resolved
Admin:
  Tested at Framlingham.

Version 0.25. Tagged as 'NetBSD-0_25'

Fix suggested by Dan Ellis.

Version 0.24. Tagged as 'NetBSD-0_24'

Version 0.23. Tagged as 'NetBSD-0_23'

Version 0.22. Tagged as 'NetBSD-0_22'

> Reduce root port reset delay to 50ms from 250ms to work with Chicony
> keyboards (again).  Comment out duplicate free(udev) at end of
> usbmodule:config_detach.

Version 0.20. Tagged as 'NetBSD-0_20'

USB transfer failed reason strings in the messages files were incorrectly being tokenised. Also added a couple of bits of debug.

Version 0.18. Tagged as 'NetBSD-0_18'

Added new CallDevice reason code (&80000005) to clear a stall condition on a pipe with a given FileSwitch handle

New usbdevs and usbdevs_data from NetBSD
Rewrote power source detection to skirt round dodgy devices which say
they're self powered,set MaxPower=0,and don't respond to a getstatus()
Copes better with devices being unplugged while a transfer using them is active

Version 0.17. Tagged as 'NetBSD-0_17'

Detail:
  * Errors now use the allocated error number base, &819000, instead of a
    base in the private range, &50000000. "USB transfer failed" errors now
    have use a sub-range of error numbers from &819020; the original BSD
    error number can be retrieved from the bottom 5 bits of the RISC OS
    error number.
  * Service_USB 1 now returns the list in the order in which the devices,
    rather than in the reverse order as previous versions of the module did.
  * A little tweaking of h/usb_port to reduce compiler warnings.
  * Some compiler-satisfying changes to allow use of packed structures.
    (However, the compiler doesn't seem to work correctly yet, so this is
    currently switched out using -DDISABLE_PACKED on the command line.)
  * Added full stops to end of star command help strings for consistency
    with rest of OS.
  * New exports: USBDevFS (moved here from ^.h) and a few files in dev/usb/h
    and sys/h.
Admin:
  Error number overhaul and new exports are both required by SCSISoftUSB.

Version 0.16. Tagged as 'NetBSD-0_16'

Null vendor names no longer say oflaofla.

Version 0.14. Tagged as 'NetBSD-0_14'

Added stuff to delete the DeviceFS$USB*$Options variables when the module is
RMkilled.

Version 0.12. Tagged as 'NetBSD-0_12'

Fix for erratic behaviour after having unplugged hubs: TAILQ was being given an entry which wasn't on its list, and the behaviour was to break the list and poke a zero into the reset vector!

Also, some extra IFDEF's so that debug builds will work again.
A few typos/spelling errors changed.

Version 0.11. Tagged as 'NetBSD-0_11'

Before I forget,unset the DeviceFS$USBnnn$Options variable due to not reusing numbers and DeviceFS not deleting them - is there such thing as variable leaks?

Version 0.10. Tagged as 'NetBSD-0_10'

Version 0.09. Tagged as 'NetBSD-0_09'

Found a "busses" lingering in the messages file,also removed a \n which must have been copied from a printf somewhere.

Old service call detail removed from c.port as it's defined in another
file differently!
USBDiscover is now only available for debugging purposes.
Internationalised the mouse name (default is still "USB mouse").

Version 0.08. Tagged as 'NetBSD-0_08'

Makefile now zaps the linked directory too.

Version 0.07. Tagged as 'NetBSD-0_07'

Another fix to the previous buffer overrun fix,such that this time the command aliases actually get executed now.

Timing code changed to work round HAL call not returning the right value
so temporarily wired to 2000000.
Change to Makefile so ROM builds don't have annoying throwback windows
popping up,this is now in the !Mk file.Also "-ff" function names away.

Version 0.05. Tagged as 'NetBSD-0_05'

Version 0.04. Tagged as 'NetBSD-0_04'

Minor bug fix,the system variable was getting run before the device was fully established in DeviceFS - which could cause printing problems.

Version 0.03. Tagged as 'NetBSD-0_03'

Version number now got from Version file,not hand tweaked CMHG file.
Timer was a factor 10 out in previous version due to typo.

Version 0.02. Tagged as 'NetBSD-0_02'

Correction of spelling of busses to buses (noun plural).
OHCIdriver only responds to PCI service call to lookup vendor name when
the device is of class OHCI controller.

Version 0.01. Tagged as 'NetBSD-0_01'