GitLab

Added "CASystem" tag to STB5 tags file, matching STB400 tags file.

Version 0.65. Tagged as 'NVRAM-0_65'

Other minor build tweaks.

Version 0.64. Tagged as 'NVRAM-0_64'

Detail:
  Generic conditional access system allocation added, and Customer N allocation
  moved away from the small allocations.
Admin:
  No STB5 resources yet, but they should reflect this change.

Version 0.62. Tagged as 'NVRAM-0_62'

Version 0.61. Tagged as 'NVRAM-0_61'

Version 0.60. Tagged as 'NVRAM-0_60'

* Added the Customer I allocation
* Added the SPDIF output modes tags
* Added the EngMenu startup keys allocation

Version 0.59. Tagged as 'NVRAM-0_59'

Detail:
  Changed default for browser scaling to be off, hurrah.
Admin:


Version 0.58. Tagged as 'NVRAM-0_58'

Detail:
  Allocated a 1KB chunk of the STB-400 NVRAM to the Customer N
  software. This is for their code to play with so I have no idea
  what it will contain.
Admin:
  No tests performed.

Version 0.57. Tagged as 'NVRAM-0_57'

Detail:
    The macro NVRAMSWI_Base was being defined in the exported header nvram.h
as well as the global header swis.h, causing a multiple definition warning.
The exported header version has now been macro wrapped to prevent it being
multiply defined.

Admin:
    Tested in a Lazarus build.

Version 0.56. Tagged as 'NVRAM-0_56'

Detail:
    Reordered the makefile slightly.
    There is now a Docs directory, in which is a file that contains detail of
the five SWIs that were added to version 0.48 of this module. This
information was not available elsewhere and needs to go into the FS sometime.
    Replace the Mk... obey files with !Mk... files.
    The header files now include the five new SWI definitions.

Admin:
    Untested.

Version 0.55. Tagged as 'NVRAM-0_55'

Detail:
  Exports Resources.<System>.Tags during BBE resource phase.
Admin:
  Tested in BBE.

Version 0.54. Tagged as 'NVRAM-0_54'

Detail:

  * MakeImage (for Lazarus/Bethany systems) is now South Africa aware.
    Non-supported countries are deliberately omitted so as to ensure that
    the NVRAM cannot be programmed with an unsupported territory.

Admin:

  * Tested on RPC.  Verified the resultant NVRAM image.

Version 0.53. Not tagged

Admin:
  ECO4397
  Will point the tag NVRAM-0_53 to point to this, so it will check out
  with the correct sources.

Detail:
  The NVRAM image creator for Lazarus/Bethany has been updated to be aware of
  a DefaultTimeZone flag.  It takes a standard time zone (ie. +9:30) and
  converts it to an integer to store in the NVRAM.
Admin:
  The produced outputs look correct.
  Still need to update the functional spec and update copy in DO, but I'll do
  this tomorrow as I want to go home now...

Version 0.53. Tagged as 'NVRAM-0_53'

Detail:
  Various Makefile bugs were preventing CMHG from working correctly resulting
  in build failures.  The CMHG automatically generated header.h file is now
  removed during a MkClean along with the dynamic dependices.
Admin:
  Build testing performed on local machine.

Version 0.52. Tagged as 'NVRAM-0_52'

Detail:
  Updated section 2.2.3 (Default settings) to include country codes as
  required by Bethany to make the document more complete.
Admin:
  NVRAM version remains the same as this is not a functional change.
  The tag on this function specification will be moved to NVRAM-0_51.

Added support for a default country to prevent non-UK Bethany boxes being set to UK on a hard reset.

Detail:
  Countries are now specified as the country name, not the RISC OS country code
  as previous versions.
  Fixed bug by where the NVRAM locations for DefaultTerritory and ModemCountry
  were swapped.  Also fixed bug regarding the NVRAM setting for
  DefaultTerritory.  When storing this, the value must be the RISC OS country
  code EOR 1.
Admin:
  Spec updated (included here in the Resources directory).  ECO number 4392.
  Software modifications tested on my Risc PC and on the Bethany hardware.

Version 0.51. Tagged as 'NVRAM-0_51'

Detail:
	Now supports CSFS tags being available within the configuration file.
To compile this functionality in, then compile the code with the SUPPORT_CSFS
preprocessor flag set.
	Altered the DefaultCountry and ModemCountry tags so that their types
are now correct. This will stop a potential bug from occuring.
	Tags are now written into the BootBlock area if they have a TagType
greater than zero. This allows us to disperse the tags in the internal
big_list in a more sane manner.
 	Also added an example config file for CSFS support.

Admin:
	Tested.
	Please note that if giving this code to outside customers for the
Customer A-based projects they must not get any of the SUPPORT_CSFS-enabled code.
Plase strip this out if sending the code outside the company.

Version 0.50. Tagged as 'NVRAM-0_50'

  Tidied up indirect tags pointing to integer values.
Detail:
  If the default field is enclosed in quotes it is taken as being a string
   the escape character is currently a forward slash. Any character apart from
   '\0' may be used in the string so in theory any data type could be encoded
   provided it doesn't need a 0 byte anywhere in it. Infact this would be easy
   to fix - the removal of the escape characters could be done as the string
   is copied into the cache buffer so 0 bytes could be escaped.
  When a string is read and temporary buffer is allocated and it's address is
   returned in the value field. To indicate this a bit in the flag word is set
   LOCATION_FLAGS_POINTER - this bit is not useful outside the module but is
   returned by NVRAM_Lookup.

  c/nvram
   FullReset & LockedReset both modified to understand what to do if
 		LOCATION_FLAGS_POINTER is set
   GetLocation now takes an extra argument either TRUE or...

Added SWI NVRAM_Lookup which takes a pointer to a Tag in r0 on entry and returns startbyte within NVRAM (suitable for use with OS_NVMemory) in r0, startbit within byte in r1, length in r2 and flags in r3

  Added SWI NVRAM_Set and Get which take the same arguments as Read
  and Write but now return error pointers in r0 an error occurs
  instead of a -ve number.
  Added SWI NVRAM_SetBytes and GetBytes which work like Set/Get but also
  take an offset in r3 that is added to the address of the Tag to allow
  access to part of a Tag without needing to read or write the whole
  thing.

Detail:
  NVRAM_Read and Write used to pass on proper RISC OS errors if an external
  error was generated, but returned a -ve number in r0 if an internal error
  occured.
  NVRAM_Get and Set behave properly and use the error block 0x00819200
  this also means that Set preserves r0 (it used to return 0 for success)
  For compatibility Read and Write have not been removed but are deprecated,
  additionally the new error codes are t...

Detail:
  * On advice from Stewart, tied nvcheck utility version number to the
    parent component.
  * MkClean script modified to only remove files, not recursing through
    the directory structure.
Admin:
  Briefly tested that it compiles. No other changes made.

Version 0.47. Tagged as 'NVRAM-0_47'

Detail:
  * After discussion with Kevin, changed to using <> instead of "'s around
    indirected tags. This might allow strings to be included at some
    future date.
Admin:
  Tested. Works the same as before.

Version 0.46. Tagged as 'NVRAM-0_46'

Detail:
  * Indirected tag checking support added to identify tags which refer to
    tags which don't exist or cyclic dependencies.
  * Initial work to allow Throwback to be dropped in if it's ever needed.
  * Now includes a versionnum file to ensure that versions of the file
    can be identified.
Admin:
  Tested with the supplied test file and a number of real
  well-formed files.

Version 0.02. Not tagged

Detail:
  * Tags with a default value as a tagname in quotes will use the default
    value from that tag. This will allow certain tags to be programmed
    into the NVRAM at manufacture which are always restored, regardless of
    the configuration of the main tag. This is required
  * For reasons of ease, parts of the decoding process have been reworked;
    with the effect that pointers to register blocks aren't passed around
    now.
Admin:
  Tested locally; needs testing in a full build.
  This feature is needed for Bethany to support a default country, so that
  they will always start in a valid state.

Version 0.45. Tagged as 'NVRAM-0_45'

Detail:
  * This code was previously on the internal Customer A website, but has now
    been moved to CVS control.
Admin:
  Generates correct images for Bethany EEPROM.

Version 0.44. Not tagged

Detail:
  The Desktop module has been moved nearer the top of the Components
  for STB-400 to avoid any future confusion about module lists getting
  out-of-sync.
Admin:
  To be tested in ROM build STB400151c

Version 0.44. Tagged as 'NVRAM-0_44'

Detail:
  The MPEGDriver module initialises another module, MPEGDriver+, during
  ROM init. This means that *ROMMOdules and SYS"OS_Module" enumerations
  of the module chain give different valued for the Desktop module.

  Thus, the configured language was missing the Desktop module by one
  place (hitting WindowManager).

  This fix is until the ROM build of MPEGDriver is changed to link-in
  MPEGDriver+ on Service_PostInit.
Admin:
  To be tested in build STB400151A

Version 0.43. Tagged as 'NVRAM-0_43'

Detail:
   Added DebugLib to the trace file.
   All of the tags for the DSL400 resource are 3 digits with the exception
   of one this has been fixed.
Admin:
   Oh! ran it a couple of times.  Prodded it with a stick, it seemed alright.

Version 0.42. Tagged as 'NVRAM-0_42'

Detail:
  MPEGDriver creates a dummy module which puts numbering of modules
  out by one (ie: configured language!).

Version 0.41. Tagged as 'NVRAM-0_41'

Detail:
  The new, improved NetTime module requires a four-byte block
  for the SystemTime. This tag has been added for the STB-400
  build.
Admin:
  Untested.

Version 0.40. Tagged as 'NVRAM-0_40'

   * This is a change to the STB400 tags file only

Version 0.39. Tagged as 'NVRAM-0_39'

Detail:
  The configured language is stored in byte 185 (&B9) and is set
  to default to the Desktop module.
Admin:
  Untested.

Version 0.38. Tagged as 'NVRAM-0_38'

* added the 'WideScreenSignalling' tag.  This is used by the DENC driver to determine if the STB will send signalling over the SCART connection to determine the picture type.

Admin:
  * this has been passed through the CheckNVRAM utility.

Version 0.37. Tagged as 'NVRAM-0_37'

Version 0.36. Tagged as 'NVRAM-0_36'

CVS has managed to gets its knickers in a twist and not tag all of the files on the last check-in so there are no changes between 0.35 and 0.34

Version 0.35. Tagged as 'NVRAM-0_35'

Version 0.34. Tagged as 'NVRAM-0_34'

* WimpAutoScrollDelayUnit was missing
* WimpIconiseButton had the wrong default value

Version 0.33. Tagged as 'NVRAM-0_33'