GitLab

Version 6.16. Tagged as 'BuildSys-6_16'

Version 6.15. Tagged as 'BuildSys-6_15'

Also, don't bother with a duplicate BootCommands post 3.60, the one already in 3.10 (with English messages) will do.

Version 6.14. Tagged as 'BuildSys-6_14'

Version 6.13. Tagged as 'BuildSys-6_13'

Used to resolve SWI names by Squish when building !HForm.

Version 6.12. Tagged as 'BuildSys-6_12'

* Include in disc image (needed by InetSetup when TCP/IP is enabled)
* Remove portable from the IOMD module listing (demoted to export only)

Version 6.11. Tagged as 'BuildSys-6_11'

Detail:
  Components/ROOL/BCM2835 - Insert VCHIQ into ROM, just before BCMSound (the first module that uses it)
  Components/ROOL/Disc - Removed VCHIQ softload, it's both no longer necessary and no longer supported by the makefile
Admin:
  Tested on Raspberry Pi
  BCM2835 changes require VCHIQ-0_05, and will require relatively recent firmware at runtime


Version 6.10. Tagged as 'BuildSys-6_10'

Ditch GameModes dummy module in line with other 5.xx series ROMs it's unlikely that any games pre dating the Risc PC would not need more extensive work to become 32 bit than a simple RMEnsure of a dummy module.

Version 6.09. Tagged as 'BuildSys-6_09'

TaskManager bravely steps into the void. This is now consistent with the defaults in Kernel-5_35-4_79_2_183.

Version 6.08. Tagged as 'BuildSys-6_08'

New 'I' for IOMD.
Removed 'P' for Phoebe.

Version 6.07. Tagged as 'BuildSys-6_07'

Version 6.06. Tagged as 'BuildSys-6_06'

The only reference to NetUtils is where !InetSetup attempts to load it (silently ignoring any fail).
It also outputs this command into "Internet.Startup" but after an RMEnsure of NetFS 5.79.
Since these are ROM components files, and in every case NetFS 5.79 is present, NetUtils is redundant. !InetSetup should continue as before since it is part of the universal boot sequence and may find itself on a machine with an older NetFS.
Also - moved RTCAdjust up into alphabetical order (this handily keeps the module numbering the same for Tungsten & IOMD as a side effect).

Version 6.05. Tagged as 'BuildSys-6_05'

I'm hoping to get to the bottom of the (very tricky to reproduce in a
sensible amount of time) crashes during Disc and DiscDev builds.

Version 6.04. Not tagged

Detail:
  ModuleDB - Added BatMgrHAL. Point BatMgr at released souces instead of private ones.
  Components/ROOL/OMAP3, Components/ROOL/OMAP3Live - Added BatMgrHAL to ROM
Admin:
  Tested on BB-xM, Pandora, TouchBook


Version 6.04. Tagged as 'BuildSys-6_04'

Version 6.03. Tagged as 'BuildSys-6_03'

Detail:
  It is sensible for the autogenerated swis.h that's included with the
  C tools to include the maximum number of SWI definitions (normally it only
  contains definitions for modules that are included in the build). This adds
  all the necessary exports, except for Hdr:ARM3Cache, which is from an
  obsolete module that hasn't been publicly released.
Admin:
  Tested in a C tools build.

Version 6.02. Tagged as 'BuildSys-6_02'

Detail:
  Lib.ModuleTask, Lib.AcornNC and Lib.HTMLLib don't build at present because
  their makefiles depend upon the Makatic suite that we don't distribute.
  However, no binaries in the disc build actually require these libraries,
  so to remove the build errors, the simplest thing is to exclude the
  libraries from the build.
Admin:
  Tested in a clean-from-CVS disc build

Version 6.01. Tagged as 'BuildSys-6_01'

BootFX happened to be the module _before_ Squash, which was an ironic
choice when it came to adding support for squashed sprite files. Now
it's just _after_ Squash.

Version 6.00. Tagged as 'BuildSys-6_00'

The component name had an uppercase 'B' which, through the use of the shared TBoxMake makefile in turn became its directory name in resourcefs.
However, with non UK territory the string collation rules would not match this and the Iconbar module would die on init.
Fixes ticket #318.

Version 5.99. Tagged as 'BuildSys-5_99'

Detail:
  ModuleDB - Added PandoraKey entry
  Components/ROOL/OMAP3, Components/ROOL/OMAP3Live - Added PandoraKey to ROM. Currently at the end of the module chain since it seemed a bit uncooperative when I placed it further near the start
Admin:
  Tested on Pandora, rev C2 BB, rev A2 BB-xM, rev C1 TouchBook


Version 5.98. Tagged as 'BuildSys-5_98'

Matches p192 of ISBN 1 85250 103 0.

Detail:
  Components/ROOL/BCM2835 - Add SerialDeviceSupport export, as it's required by the kernel. Remove ARM module as its functionality is now implemented by the kernel.
Admin:
  Tested on Raspberry Pi with high processor vectors


Version 5.97. Tagged as 'BuildSys-5_97'

Moving it to !Boot.Library didn't actually help.

Version 5.96. Tagged as 'BuildSys-5_96'

* Added !Madness to ModuleDB
* Added !Madness to disc diversions
* Relocated ArmBE into Library since BASIC has never bothered RMEnsuring it, so EDIT only works if it's on the run path (or had previously been manually loaded)

Version 5.95. Tagged as 'BuildSys-5_95'

Version 5.94. Tagged as 'BuildSys-5_94'

Version 5.93. Tagged as 'BuildSys-5_93'

* Added to disc image
* Added Raspberry UserIF to !ThemeDefs

Version 5.92. Tagged as 'BuildSys-5_92'

Version 5.91. Tagged as 'BuildSys-5_91'

Make use of it for the ROMs which include BootCommands

Version 5.90. Tagged as 'BuildSys-5_90'

Version 5.89. Tagged as 'BuildSys-5_89'

Retagged as BuildSys-5_88.

Detail:
  This module is expecetd to be in the Video subdirectory of System:Modules

Version 5.88. Tagged as 'BuildSys-5_88'

Modify makefile fragments to generate GPA & symbol files when building ROM modules. Add HangWatch to ModuleDB.

Detail:
  Makefiles/AAsmModule, Makefiles/CModule - Modified to generate GPA (for assembler) and symbols (for C) files when building ROM modules. These files are copied into the install folder, allowing them to easily be picked up by debugging tools.
  ModuleDB - Added entry for HangWatch module
Admin:
  Makefile changes tested with BCM2835, OMAP3, and Disc builds


Version 5.87. Tagged as 'BuildSys-5_87'

Detail:
  * Added RemotePrinterSupport modules to BuildHost, so disc builds build
    cleanly
  * Added ScreenFX module to Disc build
  * Added components required by the above: USBDriver and PRISMLib
Admin:
  Tested in respective builds

Version 5.86. Tagged as 'BuildSys-5_86'

Version 5.85. Tagged as 'BuildSys-5_85'

Version 5.84. Tagged as 'BuildSys-5_84'

Not tagged.

Version 5.83. Tagged as 'BuildSys-5_83'

Detail:
  Components/ROOL/Disc - Added VCHIQ softload (+ written offer of sources) to disc image, inside 5.10 predesk. Added PCI module to header export for benefit of building VCHIQ.
Admin:
  Tested on Raspberry Pi


Version 5.82. Tagged as 'BuildSys-5_82'