GitLab

Version 7.46. Tagged as 'BuildSys-7_46'

* Put the GENET autosense into !InetSetup
* Export Dialler's header for !Browse now the component is published.
* Chuck MailMan in the bonus bin, for that Econet mail experience.

Version 7.45. Tagged as 'BuildSys-7_45'

Replace redundant AUNMsgs module with WindowScroll, to avoid unplugged
modules being shuffled.

Also remove rogue AcornURI from BCM2835 ROM.

Version 7.44. Tagged as 'BuildSys-7_44'

PPP also turned out to need Dialler exports, so that got released too.
Add PPP to the Disc components, and Dialler for its exports.

Version 7.43. Tagged as 'BuildSys-7_43'

At time of writing neither works, but they go dormant gracefully.

Version 7.42. Tagged as 'BuildSys-7_42'

Terrible window editor WinEdit is in the bonus bin, so why not FormEd too.

Set the -at address to match reduced HAL size (from Env-1_43).
Remove EnforceSCSI4 predefine from iMx6, there's no such switch in the Kernel, replace it with best guess as might have been: configure SCSI drive 4.

Detail:
  AcornSSL now built from source.
  AcornHTTP TARGET changed.
  Missing headers from FileSwitch added.
Admin:
  Build completed (having started from standard Exports in DDE29a).

Version 7.41. Tagged as 'BuildSys-7_41'

Version 7.40. Tagged as 'BuildSys-7_40'

Version 7.37. Tagged as 'BuildSys-7_37'

Version 7.36. Tagged as 'BuildSys-7_36'

Rename dummy module NetUtils2 to NetUtils2. Use NetUtils for the real thing.
RISC OS 3.50 and later had a new enough version of NetFS to not need patching (>=5.79), so on the face of it the simplest solution would be to load the newer NetFS on earlier OS versions. However, that wouldn't work if you were booting via NetFS (compared with loading NetUtils, which can be done while NetFS is being used).

Version 7.35. Tagged as 'BuildSys-7_35'

Version 7.34. Tagged as 'BuildSys-7_34'

Version 7.33. Tagged as 'BuildSys-7_33'

Admin:
  Move Podule/ADFSFiler/SATADriver around to similar positions to other components file (so they appear after the modules on which they depend, even if that's not alphabetical).
  Update type in ModuleDB.

Version 7.32. Tagged as 'BuildSys-7_32'

Version 7.31. Tagged as 'BuildSys-7_31'

Admin:
  Added to ModuleDB and BonusBin components

Version 7.30. Tagged as 'BuildSys-7_30'

The sources were added a few years ago, a dumper number allocated, and printer definition. Complete the set with the dumper too.

Version 7.29. Tagged as 'BuildSys-7_29'

Version 7.28. Tagged as 'BuildSys-7_28'

Detail:
  Disc - add AcornHTTP and URL modules, force en-gb CmdHelp for RouteD in 310 directory.
  OMAP5 - add ADFS/SATADriver/ATAPI, change default CMOS to select FileSystem=ADFS
  Libs makefiles - add path to ZLIB
  ModuleDB - Relocate OMAP5 HAL to mixed/

Version 7.27. Tagged as 'BuildSys-7_27'

Version 7.23. Tagged as 'BuildSys-7_23'

Detail:
  ModuleDB & components files updated

Version 7.22. Tagged as 'BuildSys-7_22'

ModuleDB: Add entry for OmniNFS. Move NFS now it's been scrubbed clean for publishing.
Components/Disc: Add OmniNFS and NFS to !Omni. It may be more appropriate to put NFS in !System, let's see.

Version 7.20. Tagged as 'BuildSys-7_20'

Detail:
  Relocate AHCIDriver.
  Re-order the first few modules of iMx6 to match the other ROMs in light of ScreenModes dependency changes.
  Omit ZeroPain, this is provided in the download ZIP as a disc component.
  Omit EtherUSB - no sources in the products file so the build failed.
  Do run the ABRelease phase otherwise the autobuilder produces no output.
  Minor white space changes.

Version 7.19. Tagged as 'BuildSys-7_19'

Detail:
  No longer a target of this component.

Version 7.18. Tagged as 'BuildSys-7_18'

Detail:
  CallASWI now contains an ASSERT for No32bitCode, so in the All environment it doesn't build.
  TaskWindow standalone module has ADR out of range.
Admin:
  For CTools.

Version 7.17. Tagged as 'BuildSys-7_17'

Detail:
  In order that they be considered during the 'install' phase, make these 2 components type C rather than type EXP.
  Components/ROOL/BonusBin & PlingSystem: change all libraries to only be exported
  Components/ROOL/CTools: add an install location for PDebug, needed by DebugLib
Admin:
  Fix for DDE build missing some required libraries. Required CLibrary shared makefile revision 1.9.

Version 7.16. Tagged as 'BuildSys-7_16'

Add Access+ as a utility, called out by the "Local networks" chapter of the User Guide, and missing since RISC OS 3.70 days (despite ShareFS having the functionality).
Add an install target to the CLibrary makefile, this allows the library to be installed somewhere other than the exports directory which is useful for the CTools component for example.

Version 7.15. Tagged as 'BuildSys-7_15'

Admin:
  OHCIHeaders removed from ModuleDB.
  For those components that use the USBHAL add that to the EXP phase.

Version 7.14. Tagged as 'BuildSys-7_14'

Version 7.12. Tagged as 'BuildSys-7_12'

Detail:
  - ModuleDB - Define BASICVFP component
  - Components/ROOL/BCM2835, BCM2835Pico, OMAP3, OMAP3Live, OMAP4, OMAP5, Titanium, iMx6 - Add BASICVFP to ROM for all ARMv6+ machines
Admin:
  BCM2835 build tested
  Requires BASIC-1_67, Library-1_91


Version 7.11. Tagged as 'BuildSys-7_11'

Version 7.10. Tagged as 'BuildSys-7_10'

Also spotted that the CTools components file doesn't add a copy of CallASWI/FPEmulator to the EndUser directory. These 2 modules are required (the stubs include RMEnsures of CLib/CallASWI/FPEmulator).

Version 7.09. Tagged as 'BuildSys-7_09'

Same as for Pico, ordinary Pi users can enjoy wiggling their I/O.

Version 7.08. Tagged as 'BuildSys-7_08'

Detail:
  Components/ROOL/BuildHost - ColourPicker needed for header exports
Admin:
  Tested with BuildHost build


Version 7.07. Tagged as 'BuildSys-7_07'

Detail:
Admin:
 tested on iMx6

Version 7.06. Tagged as 'BuildSys-7_06'

All the other targets place ScreenModes earlier for EDID probing reasons.

Version 7.05. Tagged as 'BuildSys-7_05'

Force BCMVideo to work discless using a built in MDF, in lieu of EDID.

Version 7.04. Tagged as 'BuildSys-7_04'

Detail:
Admin:


Version 7.03. Tagged as 'BuildSys-7_03'

Detail:
Admin:


Version 7.02. Tagged as 'BuildSys-7_02'