GitLab

For iMx6, remove DDEUtils to match the other ROMs (it's in the HardDisc4 image).

Version 7.57. Tagged as 'BuildSys-7_57'

Requires Env-1_46

Replace redundant AUNMsgs module with WindowScroll, to avoid unplugged
modules being shuffled.

Also remove rogue AcornURI from BCM2835 ROM.

Version 7.44. Tagged as 'BuildSys-7_44'

Detail:
  Ordering of FPE with respect to ScreenModes not important post ScrModes-0_55.

Version 6.92. Tagged as 'BuildSys-6_92'

Export needed by CDFSSoftATAPI.

Version 6.89. Tagged as 'BuildSys-6_89'

The ROM build of TinyStubs has done nothing since version 0.07 (1998) except count how many clients it has and refuse to die if non zero. The last RAM set of Toolbox modules to use it was just before Expresso (Java Risc PC) in 1998 also.
The Toolbox modules now make use of more functions than TinyStubs provided so can simply use the normal C libary.
While 'tlink' (the special linker used to link against TinyStubs) is mentioned in passing in application note 280 it doesn't appear Acorn ever released it, plus there's no 32 bit version available.

Tested over several months in an IOMD ROM.

Version 6.74. Tagged as 'BuildSys-6_74'

Detail:
  Components/ROOL/BCM2835, BCM2835Pico, IOMD32, OMAP3, OMAP3Live, OMAP4, Tungsten - Moved ScreenModes (+FPEmulator) to just before the video drivers, so that (once the EDID changes are submitted) the first mode change will be able to use EDID-derived mode timings instead of fixed ones.
  IOMD change is somewhat non-essential due to lack of EDID reading support, but keeps things consistent with the other ROMs.
  Also moved PandoraKey to be with the other keyboard (USB) drivers.
Admin:
  Tested on BB-xM, Iyonix, Pandora, Raspberry Pi, RiscPC


Version 6.47. Tagged as 'BuildSys-6_47'

Add RTC as an export on the Disc components (for NetTime)
Retire BASICTrans, placing alphabetically pleasing BlendTable in its slot

Version 6.35. Tagged as 'BuildSys-6_35'

Replace RTCAdjust with RTC in IOMD and Tungsten builds.
Add RTC to OMAP3 and OMAP4 builds.

Version 6.33. Tagged as 'BuildSys-6_33'

Detail:
  ModuleDB - Added BlendTable
  Components/ROOL/BCM2835, IOMD32, OMAP4, OMAP4, S3C2440, S3C6410, Tungsten - BlendTable added to all ROMs for use by SpriteExtend
  Components/ROOL/Disc - BlendTable & InverseTable added to export stage in order to allow CFSI-JPEG to build
Admin:
  OMAP3 ROM tested on BB-xM
  CFSI-JPEG tested on Iyonix


Version 6.29. Tagged as 'BuildSys-6_29'

* Include in disc image (needed by InetSetup when TCP/IP is enabled)
* Remove portable from the IOMD module listing (demoted to export only)

Version 6.11. Tagged as 'BuildSys-6_11'

Ditch GameModes dummy module in line with other 5.xx series ROMs it's unlikely that any games pre dating the Risc PC would not need more extensive work to become 32 bit than a simple RMEnsure of a dummy module.

Version 6.09. Tagged as 'BuildSys-6_09'

TaskManager bravely steps into the void. This is now consistent with the defaults in Kernel-5_35-4_79_2_183.

Version 6.08. Tagged as 'BuildSys-6_08'

The only reference to NetUtils is where !InetSetup attempts to load it (silently ignoring any fail).
It also outputs this command into "Internet.Startup" but after an RMEnsure of NetFS 5.79.
Since these are ROM components files, and in every case NetFS 5.79 is present, NetUtils is redundant. !InetSetup should continue as before since it is part of the universal boot sequence and may find itself on a machine with an older NetFS.
Also - moved RTCAdjust up into alphabetical order (this handily keeps the module numbering the same for Tungsten & IOMD as a side effect).

Version 6.05. Tagged as 'BuildSys-6_05'

The component name had an uppercase 'B' which, through the use of the shared TBoxMake makefile in turn became its directory name in resourcefs.
However, with non UK territory the string collation rules would not match this and the Iconbar module would die on init.
Fixes ticket #318.

Version 5.99. Tagged as 'BuildSys-5_99'

Make use of it for the ROMs which include BootCommands

Version 5.90. Tagged as 'BuildSys-5_90'

Version 5.69. Tagged as 'BuildSys-5_69'

Moved SharedSnd up to the other sound modules, partly to group by function, but mostly so Freeway/ShareFS don't change position as they're commonly unplugged.

Version 5.57. Tagged as 'BuildSys-5_57'

Detail:
  Added UnSqzAIF to IOMD32, OMAP3, OMAP3Live, OMAP4, S3C2440, S3C6410 and Tungsten ROM images, to protect against the squeeze 5.03-5.08 bug. Even though the bug hasn't been seen on all platforms, there's no harm in taking precautions against it.
  Added UnSqzAIF to PlingSystem, for 3.70+
Admin:
  New version of UnSqzAIF tested in softload form on Iyonix
  OMAP3 ROM & PlingSystem build OK, others untested


Version 5.52. Tagged as 'BuildSys-5_52'

Detail:
  Components/ROOL/IOMD32 - Move SCSIFS to end of components list. Must come after FileCore due to new dependency on FileCore headers.
Admin:
  IOMD ROM built OK, but untested at runtime


Version 5.48. Tagged as 'BuildSys-5_48'

* Added components file to generate a !System
* Binaries/Browse/BuildEnv/Disc/IOMD32/OMAP4/Printers/Tungsten add heading blocks and line stuff up
* OMAP3 remove unused switch from FPEmulator
* SysMap add mapping from Sovereign to 'V'
* CTools extra qualifiers on some modules to get help right for modules in the 310 directory
* AAsmModule when CMDHELP=None is in force you can infer that no international help is desired, therefore pass this as a switch to the module to allow it to remove the tokens from its help table (based on how the 'standalone' switch is done)

Version 5.35. Tagged as 'BuildSys-5_35'

Detail:
  Components/ROOL/IOMD32, OMAP3, OMAP4, Tungsten - These ROMs now include the SharedSound module
Admin:
  OMAP3 & Tungsten ROMs tested


Version 5.29. Tagged as 'BuildSys-5_29'

Detail:
  Components/ROOL/IOMD32, Components/ROOL/OMAP3, Components/ROOL/S3C2440, Components/ROOL/S3C6410,Components/ROOL/Tungsten - Now all use romlinker as their joiner instead of BigSplit2. Required change so that the new kernel can find the ROM build date in the ROM footer.
  Components/ROOL/OMAP3 - Use noimagesize option to prevent the ROM image size being poked into the ROM/HAL at offset &60
Admin:
  OMAP & Tungsten ROMs built and tested.
  Before my romlinker changes, romlinker was producing identical images to BigSplit2, so there shouldn't be any critical bugs lurking in the code.


Version 5.19. Tagged as 'BuildSys-5_19'

Detail:
  Components/ROOL/IOMD32 - Enabled some extra modules now that they work: ADFS, ParallelDeviceDriver, SerialDeviceDriver, SoundDMA
Admin:
  Tested in ROM softload on RiscPC.
  ADFS floppy support is currently disabled due to not working yet, and Maestro seems to be able to cause SoundDMA/SoundScheduler to crash.


Version 5.18. Tagged as 'BuildSys-5_18'

Version 5.05. Tagged as 'BuildSys-5_05'

Admin:
  Tested in a TungstenDev build on an Iyonix
Author:
  srevill

Version 4.79. Tagged as 'BuildSys-4_79'

Detail:
  * Updates to CModule makefile fragment to reduce the number of OS-specific
    rules in main Makefiles:
    + Added (RAM|ROM)(C|ASM)DEFINES variables. These allow the calling makefile
      to specify additional defines for RAM or ROM builds of C or assembler
      source files respectively. Traditionally this was done by having separate
      object files for RAM and ROM corresponding at least to whichever source
      file was responsible for interfacing with ResourceFS, but this requires
      messy additional rules. With this new approach, it is necessary to clean
      the component when switching between RAM and ROM builds, but I don't
      think this will affect many people's workflows.
    + Added CMHGDEPENDS. This should be used to specify which object files need
      a static dependency upon the h file autogenerated from the cmhg file.
      It should be specified in the usual form for object files passed to
      CModule - with neither an o. prefix nor a .o suffix.
  * Added TBOXINTLIB to ModuleLibs makefile fragment.
  * AsmUtils, HdrSrc, TCPIPheaders, ToolboxLib and UnicodeLib all upgraded in
    ModuleDB from EXP to ASM or C components, to permit them to be built in the
    install phase. As a result, those other Components files that didn't
    already do so now need to override this back to -type EXP.
  * BuildHost Components file edited to reflect the fact that binaof, binasm,
    modgen and ResGen now have separate install phases for executables and
    Docs files.
Admin:
  The new Components file uses various components that are not publicly
  released, so it can only sensibly be used internally by ROOL. However, it's
  more convenient for us to keep it alongside the other Components files - and
  it also serves as an illustration of how to do a disc build.

Version 4.77. Tagged as 'BuildSys-4_77'

Version 4.67. Tagged as 'BuildSys-4_67'

Version 4.66. Tagged as 'BuildSys-4_66'

Version 4.63. Tagged as 'BuildSys-4_63'

This represents the version released in the Batch 4 "bbe" tarfiles.
Tagged as 'Batch4'