GitLab

Don't try and be clever using Build$Path, just refer to touch directly (since uses of it elsewhere don't have *Run).

Version 7.39. Tagged as 'BuildSys-7_39'

Version 7.38. Tagged as 'BuildSys-7_38'

Those RAM loading modules which pick from VersionNum and insert into their Messages would create a new Messages file with a new date every time they are built. Because the tools to put these in ResourceFS also capture the file's datestamp (via :FLOAD: :FEXEC: in objasm, or via resgen for C modules), you don't create binary identical copies on two successive builds despite the same input source.
Add a ${TOUCH} step to copy the reference time stamp to the generated Messages file.

Requires Library-1_96 or later for Touch.

Version 7.37. Tagged as 'BuildSys-7_37'

Version 7.36. Tagged as 'BuildSys-7_36'

Rename dummy module NetUtils2 to NetUtils2. Use NetUtils for the real thing.
RISC OS 3.50 and later had a new enough version of NetFS to not need patching (>=5.79), so on the face of it the simplest solution would be to load the newer NetFS on earlier OS versions. However, that wouldn't work if you were booting via NetFS (compared with loading NetUtils, which can be done while NetFS is being used).

Version 7.35. Tagged as 'BuildSys-7_35'

Version 7.34. Tagged as 'BuildSys-7_34'

Version 7.33. Tagged as 'BuildSys-7_33'

Admin:
  Move Podule/ADFSFiler/SATADriver around to similar positions to other components file (so they appear after the modules on which they depend, even if that's not alphabetical).
  Update type in ModuleDB.

Version 7.32. Tagged as 'BuildSys-7_32'

Version 7.31. Tagged as 'BuildSys-7_31'

Admin:
  Added to ModuleDB and BonusBin components

Version 7.30. Tagged as 'BuildSys-7_30'

The sources were added a few years ago, a dumper number allocated, and printer definition. Complete the set with the dumper too.

Version 7.29. Tagged as 'BuildSys-7_29'

Version 7.28. Tagged as 'BuildSys-7_28'

Detail:
  Disc - add AcornHTTP and URL modules, force en-gb CmdHelp for RouteD in 310 directory.
  OMAP5 - add ADFS/SATADriver/ATAPI, change default CMOS to select FileSystem=ADFS
  Libs makefiles - add path to ZLIB
  ModuleDB - Relocate OMAP5 HAL to mixed/

Version 7.27. Tagged as 'BuildSys-7_27'

Detail:
  Somehow the leading minus signs went missing - this broke ColourPicker,
  which was the only component that relied on it.

Version 7.26. Tagged as 'BuildSys-7_26'

Detail:
  Makefiles/AAsmModule:
  * This was the odd-one out amongst top-level shared makefiles in that it
    still required the master makefile to include StdTools explicitly - even
    the GNU version of this makefile did so. Now changed for consistency.
  GNUmakefiles/AAsmModule:
  * Fixed typo in renaming of MERGEDMDIR to MERGEDRDIR.
Admin:
  Fixes build error in latest FPEmulator


Version 7.25. Tagged as 'BuildSys-7_25'

Detail:
  ModuleDB:
  * Correct capitalisation of resgen's TARGET to match its main source file
  GNUmakefiles/AAsmModule:
  * Targets now given ,ffa filetype suffix
  * Support source directory layouts s/<subdir>/<leaf> as used by the
    kernel and printer drivers - define SYMLINK_EXT_FIRST to enable
  * Prevent relinking when running make on an up-to-date component due to
    a difference between amu and GNU make's handling of double-colon rules
  * Support linking with GNU toolchain
  * Fix installation rule (mixup between MERGEDMDIR and MERGEDRDIR)
  * Support up to 16 assembler and 8 C-from-assembler headers, up from 3
    of each (here's looking at you, kernel) - long-term, it might be worth
    changing this to a scheme like that used by CModule to remove any
    limits
  * Fix C-from-assembler exports to have .h suffix
  GNUmakefiles/AppLibs:
  * Define INCLUDE_OSLIB to permit OSLib header search paths to be
    specified in an OS-agnostic way
  GNUmakefiles/CApp:
  * Prevent relinking when running make on an up-to-date component due to
    a difference between amu and GNU make's handling of double-colon rules
  GNUmakefiles/CLibrary:
  * Prevent rearchiving when running make on an up-to-date component due
    to a difference between amu and GNU make's handling of double-colon
    rules
  * Don't use .hdr suffix on exported assembler header files
  * Correct order of dependencies for export_libs phony target
  GNUmakefiles/StdTools:
  * Definition for the module filetype suffix
  * Add LDBIN tool for GNU/Norcroft-agnostic binary link, useful for
    linking position-independent binary code, such as relocatable modules
    (i.e. ones that don't require the linker to create a __RelocCode
    function)
  * FAPPEND function now works if the same file is used for the
    destination as for one of the sources (this is used by CModule)
  GNUmakefiles/CModule, ModStdRule, ModuleLibs:
  * Finally created cross-compilation versions of the last major shared
    makefiles! Warning: these have received limited testing to date.
  Makefiles/AAsmModule:
  * Support up to 16 assembler and 8 C-from-assembler headers
  Makefiles/AppLibs, ModuleLibs:
  * Define INCLUDE_OSLIB
  Makefiles/StdTools:
  * Add LDBIN tool


Version 7.24. Tagged as 'BuildSys-7_24'

Version 7.23. Tagged as 'BuildSys-7_23'

Detail:
  ModuleDB & components files updated

Version 7.22. Tagged as 'BuildSys-7_22'

Detail:
  GNUmakefiles/AAsmModule:
  * Adopt same extensible syntax for describing resources phase files as CModule (see BuildSys 6.91)
  GNUmakefiles/AppLibs:
  * Don't permit CALLXLIB to be used for application builds (see BuildSys 6.61)
  * Reflect MODMALLOCLIB leafname change (see BuildSys 6.61)
  * Add TBOXINTLIB, TBOXINTDBGLIB, PDEBUGLIB, PRISMLIB, REMOTEDBLIB, TRACELIB, UNICODELIB and include more libs in DEBUGLIBS (see BuildSys 6.63)
  GNUmakefiles/CApp:
  * Add install_debug_app rule for debug app installations (see BuildSys 6.53)
  GNUmakefiles/CLibrary:
  * Allow additional dependencies to be specified using LIB_DEPENDS (see BuildSys 6.63)
  * Gains install target (see BuildSys 7.15)
  GNUmakefiles/StdTools:
  * Add shell implementation of FAppend (see BuildSys 6.45) - compatible except for the fact that the destination is given current timestamp
  * ${NOP} no longer implicitly includes the silent-command prefix character @ (see BuildSys 6.5...

ModuleDB: Add entry for OmniNFS. Move NFS now it's been scrubbed clean for publishing.
Components/Disc: Add OmniNFS and NFS to !Omni. It may be more appropriate to put NFS in !System, let's see.

Version 7.20. Tagged as 'BuildSys-7_20'

Detail:
  Relocate AHCIDriver.
  Re-order the first few modules of iMx6 to match the other ROMs in light of ScreenModes dependency changes.
  Omit ZeroPain, this is provided in the download ZIP as a disc component.
  Omit EtherUSB - no sources in the products file so the build failed.
  Do run the ABRelease phase otherwise the autobuilder produces no output.
  Minor white space changes.

Version 7.19. Tagged as 'BuildSys-7_19'

Detail:
  No longer a target of this component.

Version 7.18. Tagged as 'BuildSys-7_18'

Detail:
  CallASWI now contains an ASSERT for No32bitCode, so in the All environment it doesn't build.
  TaskWindow standalone module has ADR out of range.
Admin:
  For CTools.

Version 7.17. Tagged as 'BuildSys-7_17'

Detail:
  In order that they be considered during the 'install' phase, make these 2 components type C rather than type EXP.
  Components/ROOL/BonusBin & PlingSystem: change all libraries to only be exported
  Components/ROOL/CTools: add an install location for PDebug, needed by DebugLib
Admin:
  Fix for DDE build missing some required libraries. Required CLibrary shared makefile revision 1.9.

Version 7.16. Tagged as 'BuildSys-7_16'

Add Access+ as a utility, called out by the "Local networks" chapter of the User Guide, and missing since RISC OS 3.70 days (despite ShareFS having the functionality).
Add an install target to the CLibrary makefile, this allows the library to be installed somewhere other than the exports directory which is useful for the CTools component for example.

Version 7.15. Tagged as 'BuildSys-7_15'

Admin:
  OHCIHeaders removed from ModuleDB.
  For those components that use the USBHAL add that to the EXP phase.

Version 7.14. Tagged as 'BuildSys-7_14'

Admin:
  Formerly named 'NetBSD' now 'USBDriver'.
  Submission for USB bounty.

Version 7.13. Tagged as 'BuildSys-7_13'

Version 7.12. Tagged as 'BuildSys-7_12'

Detail:
  - ModuleDB - Define BASICVFP component
  - Components/ROOL/BCM2835, BCM2835Pico, OMAP3, OMAP3Live, OMAP4, OMAP5, Titanium, iMx6 - Add BASICVFP to ROM for all ARMv6+ machines
Admin:
  BCM2835 build tested
  Requires BASIC-1_67, Library-1_91


Version 7.11. Tagged as 'BuildSys-7_11'

Version 7.10. Tagged as 'BuildSys-7_10'

Also spotted that the CTools components file doesn't add a copy of CallASWI/FPEmulator to the EndUser directory. These 2 modules are required (the stubs include RMEnsures of CLib/CallASWI/FPEmulator).

Version 7.09. Tagged as 'BuildSys-7_09'

Same as for Pico, ordinary Pi users can enjoy wiggling their I/O.

Version 7.08. Tagged as 'BuildSys-7_08'

Detail:
  Components/ROOL/BuildHost - ColourPicker needed for header exports
Admin:
  Tested with BuildHost build


Version 7.07. Tagged as 'BuildSys-7_07'

Detail:
Admin:
 tested on iMx6

Version 7.06. Tagged as 'BuildSys-7_06'

Detail:
Admin:
 tested on iMx6

Version 7.06. Tagged as 'BuildSys-7_06'

All the other targets place ScreenModes earlier for EDID probing reasons.

Version 7.05. Tagged as 'BuildSys-7_05'

Force BCMVideo to work discless using a built in MDF, in lieu of EDID.

Version 7.04. Tagged as 'BuildSys-7_04'

Detail:
Admin:


Version 7.03. Tagged as 'BuildSys-7_03'