1. 22 May, 2016 1 commit
  2. 02 Oct, 2015 1 commit
    • Robert Sprowson's avatar
      Retire TinyStubs · 07bc8ead
      Robert Sprowson authored
      The ROM build of TinyStubs has done nothing since version 0.07 (1998) except count how many clients it has and refuse to die if non zero. The last RAM set of Toolbox modules to use it was just before Expresso (Java Risc PC) in 1998 also.
      The Toolbox modules now make use of more functions than TinyStubs provided so can simply use the normal C libary.
      While 'tlink' (the special linker used to link against TinyStubs) is mentioned in passing in application note 280 it doesn't appear Acorn ever released it, plus there's no 32 bit version available.
      
      Tested over several months in an IOMD ROM.
      
      Version 6.74. Tagged as 'BuildSys-6_74'
      07bc8ead
  3. 04 Jul, 2015 1 commit
    • Jeffrey Lee's avatar
      Ensure FPEmulator is aware of zero page relocation. Keep zero page relocation... · 63d3686b
      Jeffrey Lee authored
      Ensure FPEmulator is aware of zero page relocation. Keep zero page relocation disabled for iMx6 for now. Add ZeroPain to ModuleDB
      
      Detail:
        Components/ROOL/BCM2835, BCM2835Pico, OMAP3, OMAP3Live, OMAP4, S3C6410, Tungsten - Add "FPEANCHOR=High" to FPEmulator build options so that it uses the relocated FPEAnchor location instead of the old one. In the future FPEmulator will be fixed so that it doesn't use a hard-coded address, but for now we need to manually tell ROM versions where FPEAnchor is.
        Components/ROOL/iMx6 - Override the kernel's default decision and leave zero page relocation disabled. R-Comp can decide when it's a sensible time to enable it.
        ModuleDB - Add ZeroPain. The module isn't used in any components files yet, but it's good to list it here forthe sake of completeness.
      Admin:
        Tested with Iyonix ROM build
        Requires Kernel-5_35-4_79_2_268 for FPEAnchor setting to match reality
      
      
      Version 6.69. Tagged as 'BuildSys-6_69'
      63d3686b
  4. 20 Jul, 2014 1 commit
    • Jeffrey Lee's avatar
      Move ScreenModes to before video drivers · bad70deb
      Jeffrey Lee authored
      Detail:
        Components/ROOL/BCM2835, BCM2835Pico, IOMD32, OMAP3, OMAP3Live, OMAP4, Tungsten - Moved ScreenModes (+FPEmulator) to just before the video drivers, so that (once the EDID changes are submitted) the first mode change will be able to use EDID-derived mode timings instead of fixed ones.
        IOMD change is somewhat non-essential due to lack of EDID reading support, but keeps things consistent with the other ROMs.
        Also moved PandoraKey to be with the other keyboard (USB) drivers.
      Admin:
        Tested on BB-xM, Iyonix, Pandora, Raspberry Pi, RiscPC
      
      
      Version 6.47. Tagged as 'BuildSys-6_47'
      bad70deb
  5. 01 Dec, 2013 1 commit
    • Robert Sprowson's avatar
      Add BASIC[64] to the !System archive · a8288e52
      Robert Sprowson authored
      Add RTC as an export on the Disc components (for NetTime)
      Retire BASICTrans, placing alphabetically pleasing BlendTable in its slot
      
      Version 6.35. Tagged as 'BuildSys-6_35'
      a8288e52
  6. 20 Nov, 2013 1 commit
  7. 06 Oct, 2013 1 commit
    • Jeffrey Lee's avatar
      Add BlendTable to ModuleDB & ROM images. Add BlendTable & InverseTable to Disc exports. · 08cfcd00
      Jeffrey Lee authored
      Detail:
        ModuleDB - Added BlendTable
        Components/ROOL/BCM2835, IOMD32, OMAP4, OMAP4, S3C2440, S3C6410, Tungsten - BlendTable added to all ROMs for use by SpriteExtend
        Components/ROOL/Disc - BlendTable & InverseTable added to export stage in order to allow CFSI-JPEG to build
      Admin:
        OMAP3 ROM tested on BB-xM
        CFSI-JPEG tested on Iyonix
      
      
      Version 6.29. Tagged as 'BuildSys-6_29'
      08cfcd00
  8. 31 Jan, 2013 1 commit
  9. 14 Jan, 2013 1 commit
  10. 22 Dec, 2012 1 commit
    • Robert Sprowson's avatar
      Retire NetUtils · 46c0a1af
      Robert Sprowson authored
      The only reference to NetUtils is where !InetSetup attempts to load it (silently ignoring any fail).
      It also outputs this command into "Internet.Startup" but after an RMEnsure of NetFS 5.79.
      Since these are ROM components files, and in every case NetFS 5.79 is present, NetUtils is redundant. !InetSetup should continue as before since it is part of the universal boot sequence and may find itself on a machine with an older NetFS.
      Also - moved RTCAdjust up into alphabetical order (this handily keeps the module numbering the same for Tungsten & IOMD as a side effect).
      
      Version 6.05. Tagged as 'BuildSys-6_05'
      46c0a1af
  11. 03 Oct, 2012 1 commit
    • Robert Sprowson's avatar
      Correction to case of Iconbar toolbox component · fef50df1
      Robert Sprowson authored
      The component name had an uppercase 'B' which, through the use of the shared TBoxMake makefile in turn became its directory name in resourcefs.
      However, with non UK territory the string collation rules would not match this and the Iconbar module would die on init.
      Fixes ticket #318.
      
      Version 5.99. Tagged as 'BuildSys-5_99'
      fef50df1
  12. 02 Sep, 2012 1 commit
  13. 30 Aug, 2012 1 commit
  14. 26 May, 2012 1 commit
  15. 28 Apr, 2012 1 commit
    • Jeffrey Lee's avatar
      Add UnSqzAIF to ROM images, PlingSystem · 3e2b4ea6
      Jeffrey Lee authored
      Detail:
        Added UnSqzAIF to IOMD32, OMAP3, OMAP3Live, OMAP4, S3C2440, S3C6410 and Tungsten ROM images, to protect against the squeeze 5.03-5.08 bug. Even though the bug hasn't been seen on all platforms, there's no harm in taking precautions against it.
        Added UnSqzAIF to PlingSystem, for 3.70+
      Admin:
        New version of UnSqzAIF tested in softload form on Iyonix
        OMAP3 ROM & PlingSystem build OK, others untested
      
      
      Version 5.52. Tagged as 'BuildSys-5_52'
      3e2b4ea6
  16. 27 Feb, 2012 1 commit
  17. 12 Jan, 2012 1 commit
    • Robert Sprowson's avatar
      Various changes · 3728b452
      Robert Sprowson authored
      * Added components file to generate a !System
      * Binaries/Browse/BuildEnv/Disc/IOMD32/OMAP4/Printers/Tungsten add heading blocks and line stuff up
      * OMAP3 remove unused switch from FPEmulator
      * SysMap add mapping from Sovereign to 'V'
      * CTools extra qualifiers on some modules to get help right for modules in the 310 directory
      * AAsmModule when CMDHELP=None is in force you can infer that no international help is desired, therefore pass this as a switch to the module to allow it to remove the tokens from its help table (based on how the 'standalone' switch is done)
      
      Version 5.35. Tagged as 'BuildSys-5_35'
      3728b452
  18. 19 Dec, 2011 1 commit
    • Jeffrey Lee's avatar
      Add CLEAN_DEPEND support to AAsmModule makefile fragment. Disable VFP/NEON... · 480298f2
      Jeffrey Lee authored
      Add CLEAN_DEPEND support to AAsmModule makefile fragment. Disable VFP/NEON assembler for Tungsten ROM versions of BASIC.
      
      Detail:
        Makefiles/AAsmModule - Added ${CLEAN_DEPEND} as a dependency to the 'clean' rule, to allow components to extend the default rule. This is the same functionality that the CApp fragment offers.
        Components/ROOL/Tungsten - Disable VFP/NEON support in the BASIC assembler, due to lack of ROM space.
      Admin:
        Required changes for BASIC 1.49
      
      
      Version 5.33. Tagged as 'BuildSys-5_33'
      480298f2
  19. 07 Dec, 2011 1 commit
    • Jeffrey Lee's avatar
      Add SCSI modules to Iyonix ROM image · e89b8b64
      Jeffrey Lee authored
      Detail:
        Components/ROOL/Tungsten - Added RTSupport, SCSISwitch, SCSISoftUSB, SCSIFS, SCSIFiler and CDFSSoftSCSI to the Iyonix ROM image.
      Admin:
        Tested in Iyonix ROM softload
      
      
      Version 5.30. Tagged as 'BuildSys-5_30'
      e89b8b64
  20. 06 Dec, 2011 1 commit
    • Jeffrey Lee's avatar
      Add SharedSound to ROM images · eb4ecbcd
      Jeffrey Lee authored
      Detail:
        Components/ROOL/IOMD32, OMAP3, OMAP4, Tungsten - These ROMs now include the SharedSound module
      Admin:
        OMAP3 & Tungsten ROMs tested
      
      
      Version 5.29. Tagged as 'BuildSys-5_29'
      eb4ecbcd
  21. 31 Jul, 2011 1 commit
    • Jeffrey Lee's avatar
      Update ROM components files to use romlinker instead of BigSplit2 · 59035319
      Jeffrey Lee authored
      Detail:
        Components/ROOL/IOMD32, Components/ROOL/OMAP3, Components/ROOL/S3C2440, Components/ROOL/S3C6410,Components/ROOL/Tungsten - Now all use romlinker as their joiner instead of BigSplit2. Required change so that the new kernel can find the ROM build date in the ROM footer.
        Components/ROOL/OMAP3 - Use noimagesize option to prevent the ROM image size being poked into the ROM/HAL at offset &60
      Admin:
        OMAP & Tungsten ROMs built and tested.
        Before my romlinker changes, romlinker was producing identical images to BigSplit2, so there shouldn't be any critical bugs lurking in the code.
      
      
      Version 5.19. Tagged as 'BuildSys-5_19'
      59035319
  22. 26 Nov, 2010 1 commit
  23. 12 Jul, 2009 1 commit
  24. 26 Jun, 2009 1 commit
    • Ben Avison's avatar
      Added CTools disc build, and various supporting changes · 13d9ef8b
      Ben Avison authored
      Detail:
        * Updates to CModule makefile fragment to reduce the number of OS-specific
          rules in main Makefiles:
          + Added (RAM|ROM)(C|ASM)DEFINES variables. These allow the calling makefile
            to specify additional defines for RAM or ROM builds of C or assembler
            source files respectively. Traditionally this was done by having separate
            object files for RAM and ROM corresponding at least to whichever source
            file was responsible for interfacing with ResourceFS, but this requires
            messy additional rules. With this new approach, it is necessary to clean
            the component when switching between RAM and ROM builds, but I don't
            think this will affect many people's workflows.
          + Added CMHGDEPENDS. This should be used to specify which object files need
            a static dependency upon the h file autogenerated from the cmhg file.
            It should be specified in the usual form for object files passed to
            CModule - with neither an o. prefix nor a .o suffix.
        * Added TBOXINTLIB to ModuleLibs makefile fragment.
        * AsmUtils, HdrSrc, TCPIPheaders, ToolboxLib and UnicodeLib all upgraded in
          ModuleDB from EXP to ASM or C components, to permit them to be built in the
          install phase. As a result, those other Components files that didn't
          already do so now need to override this back to -type EXP.
        * BuildHost Components file edited to reflect the fact that binaof, binasm,
          modgen and ResGen now have separate install phases for executables and
          Docs files.
      Admin:
        The new Components file uses various components that are not publicly
        released, so it can only sensibly be used internally by ROOL. However, it's
        more convenient for us to keep it alongside the other Components files - and
        it also serves as an illustration of how to do a disc build.
      
      Version 4.77. Tagged as 'BuildSys-4_77'
      13d9ef8b
  25. 22 Apr, 2009 1 commit
  26. 03 Dec, 2008 1 commit
  27. 16 Oct, 2008 1 commit
  28. 14 Oct, 2008 1 commit