GitLab

Detail:
  Added Cortex-A15 as a known machine.
  Set the -cpu option for Cortex-A8 and -A9 to ARMv7.
Admin:
  Submission from Willi Theiss.

Version 1.82. Tagged as 'Library-1_82'

From ToGPA-0_03 built with cc 5.71 in the Disc environment.

Version 1.81. Tagged as 'Library-1_81'

Version 1.80. Tagged as 'Library-1_80'

Perl script that (recursively) scans a directory and outputs a via file that can subsequently given to ResGen. Useful to collect up resource directories for RAM loading versions of modules.
Removed obsolete 'SetAccess' which was used with SrcFiler before CVS.

Version 1.79. Tagged as 'Library-1_79'

Detail:
  Build/srcbuild,ff8 - Updated from 0.50 to 0.51, to fix a null pointer dereference
Admin:
  Tested with Iyonix ROM build
  srcbuild built using CC 5.71


Version 1.78. Tagged as 'Library-1_78'

Sources in Tools/Sources/LibUtils for reference.

Version 1.77. Tagged as 'Library-1_77'

Detail:
  The Raspberry Pi ROM now joins the IOMD ROM in supporting multiple
  architectures, in this case ARMv6 and ARMv7. This has been achieved by
  creating a new machine type specific for Raspberry Pi. The old ARM11ZF
  machine type remains for builds that are ARM11-only.

Version 1.76. Tagged as 'Library-1_76'

Version 1.75. Tagged as 'Library-1_75'

Corrected case of the ResGen tool to match how it installs itself.
Extended makefile's install rule to support CTools builds.

Version 1.74. Tagged as 'Library-1_74'

Detail:
  Build/srcbuild,ff8 - Updated to a build of version 0.50, so that errors encountered during the disc install phase will cause the build to fail
Admin:
  Binary built with Norcroft 5.69
  Tested with BuildHostDev, DiscDev, PlingSystem builds


Version 1.73. Tagged as 'Library-1_73'

Version 1.72. Tagged as 'Library-1_72'

Delete unused tool MakeTime.

Version 1.71. Tagged as 'Library-1_71'

Detail:
  Build/romlinker,ff8 - Build of romlinker 0.05
  Build/rompress,ff8 - Build of rompress 0.03
Admin:
  Built with Norcroft 5.69
  Tested with building, compressing & booting Tungsten & OMAP4 ROMs


Version 1.70. Tagged as 'Library-1_70'

Squeeze 5.12 from DDE24, this is needed as the next move in the cat and mouse chase with RISC OS Select, which was rejecting some seemingly valid binaries as detailed
  https://www.riscosopen.org/viewer/view/castle/RiscOS/Sources/HWSupport/UnSqzAIF/Docs/signatures
here.

Version 1.69. Tagged as 'Library-1_69'

There's no Vector binary.
Move 'do' and 'Where' utils alongside 'X' util.
Move 'ToGPA' into Build directory, since it's now used in module.

Version 1.68. Tagged as 'Library-1_68'

When building with BASIC that doesn't recognise SP as register 13, make sure it's defined locally just incase.
Spotted by Willi Theiss on an A9Home.

Version 1.67. Tagged as 'Library-1_67'

Detail:
  Misc/decgen/!ReadMe, Misc/decgen/decgen,ff8 - Update to decgen 1.41, required by latest version of VFPSupport
Admin:
  Tested on Raspberry Pi


Version 1.66. Tagged as 'Library-1_66'

Detail:
  Misc/decgen/* - Add a copy of decgen (http://www.phlamethrower.co.uk/riscos/decgen.php) so that it can finally start being used for generating the Debugger disassembler. This is a stripped down copy of the 1.40 release containing just the bits we need.
Admin:
  Required for building Debugger-1_85


Version 1.65. Tagged as 'Library-1_65'

Detail:
  GNU/diff,ff8 - Updated to binary built from diff-1_18 sources
  GNU/gawk,ff8 - Updated to binary built from gawk-0_02 sources
  Unix/Sed,ff8 - Updated to binary built from sed-0_02 sources
  Unix/grep,ff8 - Updated to binary built from grep-0_02 sources
  Unix/wc,ff8 - Updated to binary built from textutils-0_01 sources
Admin:
  Tested with ROM + disc builds on BB-xM
  Build system is now fully ARMv7 safe?


Version 1.64. Tagged as 'Library-1_64'

Detail:
  Build/GCCDepend,102 - Script for handling the makefile dependencies generated by GCC4. It converts them to a format which AMU can understand.
Admin:
  Required in order to build the GCC-based tools once they're updated to GCC4


Version 1.63. Tagged as 'Library-1_63'

Use INSTAPP_VERSION from the shared makefiles in preference.

Version 1.62. Tagged as 'Library-1_62'

Version 1.61. Tagged as 'Library-1_61'

Detail:
  Build/Hdr2H,102 - Now copes with << and >> shift operators
Admin:
  Tested with building OMAP3 ROM


Version 1.60. Tagged as 'Library-1_60'

It's referred to in Library/Build/Docs but no corresponding copy that you can actually run. Copied from HForm sources.

Version 1.59. Tagged as 'Library-1_59'

Slightly less slow when a large cache is in use.

Version 1.58. Tagged as 'Library-1_58'

It's an exec file so the copyright block should use REMs not |s.

Version 1.57. Tagged as 'Library-1_57'

Strikingly similar to the 'descmode' switch, but inserts version numbers into obey files as comments.

Version 1.56. Tagged as 'Library-1_56'

Detail:
  --fpu is an RVDS-era command line option, so it needs *two* dashes. There is
  no short (single-dash) form of the option. The ToolOptions file previously
  included only a single dash, and so incorrectly deduced that objasm 4 didn't
  support ARMv6 options and dropped back to ARMv5 mode.
Admin:
  No longer produces additional warnings when builing the Kernel, for one.
  This will reinstate pseudo-instruction substitutions like LDR= -> MOVW in
  ARMv6 builds as ARMv7 builds have enjoyed for some time now.

Version 1.55. Tagged as 'Library-1_55'

Detail:
  Build/xtentries,102 - Now strips any vertical bars from symbol names
  Required in order for correct operation if Entry/Entry2 is given symbol names wrapped in |'s to prevent variable expansion
Admin:
  Tested with SCL build in Tungsten ROM
  SCL symbol files look OK


Version 1.54. Tagged as 'Library-1_54'

Detail:
  Build/rompress,ff8 - Build of rompress 0.02
Admin:
  Tested briefly; seems to compress ROMs OK


Version 1.53. Tagged as 'Library-1_53'

Detail:
  Build/AwkVers - By passing 'descmode=1' on the command line, AwkVers will swap _Version with a 'version ...' entry suitable for use in Frontend 'Desc' files
Admin:
  Tested briefly


Version 1.52. Tagged as 'Library-1_52'

This one has an AOF header but is otherwise the same, since the makefiles all use 'do' that's preferred in case a case sensitive filing system is in use.

Version 1.51. Tagged as 'Library-1_51'

Detail:
  Build/Hdr2H,102 - Now copes with # directives which have no identifier on the left hand side.
Admin:
  Tested with building an OMAP3 ROM


Version 1.50. Tagged as 'Library-1_50'

Detail:
  ToolOptions/APCS-32,feb - Apart from checking the 'objasm -h' return code, the script now also does a grep of the output to look for 'Target cpu not recognised' errors, since those don't seem to cause a non-zero return code to be set
Admin:
  Fixes wrong options being used with objasm 3.32.
  I haven't actually tested a full build yet, but I'm guessing it'll work now.


Version 1.49. Tagged as 'Library-1_49'

Detail:
  To avoid lots of link warnings, we need to explicitly set the APCS calling
  standard to a FPA variant when specifying a CPU with a VFP - at the moment,
  the C compiler is only able to output FPA code, which then conflicts with
  the ObjAsm object files.
Admin:
  Tested in an OMAP3 ROM build

Version 1.48. Tagged as 'Library-1_48'

Detail:
  It seems that RISC OS 4.39, 4.42 and 6.x have a bug/misfeature that they
  can't execute directories.
Admin:
  Fix provided by Willi Theiß

Version 1.47. Tagged as 'Library-1_47'

Detail:
  * Alias for objasm sets correct -cpu and -fpu flags for v6/v7 architecture
    builds if you're using a version of objasm (>= 4.00) that supports them
  * Corrected Machine Any32 to All32 to match HdrSrc
Admin:
  Tested with objasm 3 and 4

Version 1.46. Tagged as 'Library-1_46'

Detail:
  Build/romlinker,ff8 - Updated to a build of version 0.04, to add support for some new features
Admin:
  New romlinker binary tested with building & running OMAP & Tungsten ROMs


Version 1.45. Tagged as 'Library-1_45'

Detail:
  ToolOptions/APCS-32,feb - Now detects ARM11ZF builds and sets the correct compiler options for CPU arch & unaligned accesses
Admin:
  Tested with S3C6410 ROM build. Untested at runtime.


Version 1.44. Tagged as 'Library-1_44'

There is something subtly broken in CLXLite meaning that modsqz and unmodsqz
don't work. The versions in this commit are from building against the closed
CLX library instead.

Version 1.43. Tagged as 'Library-1_43'