1. 11 Aug, 2000 1 commit
    • Stewart Brodie's avatar
      New build option to exclude NetBEUI support. · 61345d56
      Stewart Brodie authored
      Detail:
        Pass OPTIONS=-DNO_NETBEUI from the Components file if you do not need
          NetBEUI support, and LanManFS will be 12K smaller.
        In NetBEUI mode, LanManFS sends Service_DCIProtocolStatus as required.
        In IP mode, LanManFS notices Service_DCIProtocolStatus from the Internet
          module when it dies and marks all its sockets as needing reconnection.
        Booting behaviour changed to look for !ArmBoot again and not attempt
          the boot if it is missing.  Removed lots of grotty backdoor hacks
          that used to be used to determine this.
      Admin:
        Not tested at all.  This will need very thorough testing before it can
          be considered for release.
      
      Version 2.14. Tagged as 'LanManFS-2_14'
      61345d56
  2. 08 Aug, 2000 2 commits
    • Stewart Brodie's avatar
      Calls LLC_Shutdown if NetBIOS's _NB_Startup is going to fail. · 6adc491d
      Stewart Brodie authored
      Detail:
        NB_Startup was failing to stop the LLC timers if the function
          was going to fail after hooking onto TickerV.  This meant that
          if LanManFS never found an appropriate driver for NetBIOS use,
          then killing the module resulted in repeated aborts when the
          TickerV handler has invoked.
      Admin:
        Untested.
        Fixes Bugzilla bug #26
      
      Version 2.13. Tagged as 'LanManFS-2_13'
      6adc491d
    • Stewart Brodie's avatar
      Fixed machine stiff if connection left idle too long. · 4fc58c21
      Stewart Brodie authored
      Detail:
        SVC stack overflow occurred due to the recursive method used to
          discard the idle-out prevention responses.  This no longer
          happens.
        Fixed a bit of debugging which caused data aborts!
        Optimised a select() call to pass s + 1 as the first parameter to
          save Internet time in processing the fd_set.
      Admin:
        Tested on desktop build, with the idle timers set to send idle outs
          every second (so we don't have to wait 100 hours for the problem
          to occur).  No longer get problems with the machine stiffing.
      
      
      Version 2.12. Tagged as 'LanManFS-2_12'
      4fc58c21
  3. 04 Apr, 2000 1 commit
    • Stewart Brodie's avatar
      Fixed use of uninitialised pointer. · 01a3f774
      Stewart Brodie authored
        Now doesn't require that the !ArmBoot object is a directory
      Detail:
        The code in Omni.c was carefully checking that !ARMBOOT existed
          before attempting to run the boot file.  Unfortunately, it was
          using a method which bypassed the filename resolution (that does
          the ,xxx filetype name mapping), so it did not find the new Obey
          file in the 400 series baseline.  The check has been removed.
        The code in SMB.c was being caught out on an uninitialised variable
          usage when the attribute cache already held details of the object
          being sought.  The variable would have been initialised on a non-
          cached lookup, but the special case of booting a machine via LanManFS
          manages to get a cached lookup without having run through the routine
          before, resulting in a strcpy() with a destination of 0.
      Admin:
        Tested on Risc PC.
        Fixes fault 1511 (STB-400 Generic)
      
      Version 2.11. Tagged as 'LanManFS-2_11'
      01a3f774
  4. 21 Jan, 2000 1 commit
    • Stewart Brodie's avatar
      More tolerance has been added of files found on the remote server which have unexpected extensions. · 36543191
      Stewart Brodie authored
      Detail:
        LanManFS does not like it if you create (independently, using a PC or
          otherwise) files with names like "myfile,fff" which you intend to
          be displayed as files with type &FFF (ie. Text) on a RISC OS machine.
          If you tried to access the file for reading it, such as loading it
          into an editor, that worked due to the name matching resolution.
          However, any attempt to update the file caused LanManFS to attempt
          to write the file without the extension and not notice that a file
          with a ,fff extension already existed (Text files are special cased
          in the current implementation of name translation - see LanManFS
          Functional Specification for details and rationale).  Attempts to
          save typically succeed (giving you two files: myfile and myfile,fff)
          but generate "Operation not permitted" or such like.  This stemmed
          from the attempt being made by LanManFS to rename a file to the same
          name.  SMB_Rename now traps that and tells its caller that the rename
          succeeded.  The Xlate.c code now indicates correctly that the filename
          extension has been altered when a ,fff extension has to be chopped off.
      Admin:
        Tested briefly on desktop build against art-work's SAMBA server.
        Bug reported by TopCat engineers.
      
      Version 2.10. Tagged as 'LanManFS-2_10'
      36543191
  5. 29 Nov, 1999 1 commit
    • Stewart Brodie's avatar
      32-bit compatibility added. · c6e5fb1a
      Stewart Brodie authored
        Removed obsolete header files.
        Removed obsolete assembler.
        Fixed flag preservation in remaining assembler.
      Detail:
        See above.
      Admin:
        Built RAM build.
      
      Version 2.09. Tagged as 'LanManFS-2_09'
      c6e5fb1a
  6. 09 Nov, 1999 1 commit
    • Neil Bingham's avatar
      Updated makefile rules. · 3718f3fa
      Neil Bingham authored
      Detail:
        Added Install phase to Makefile.
        Added !MkInstall.
      Admin:
        Tested on FastNC Ethernet card build.
      
      Version 2.08. Tagged as 'LanManFS-2_08'
      3718f3fa
  7. 29 Apr, 1999 1 commit
    • Stewart Brodie's avatar
      Now uses DebugLib. · 6ce2ce71
      Stewart Brodie authored
        Fixed search handle haemorrhaging.
      Detail:
        The directory lookup routines cached directory search handles to avoid
          hammering the server with repeated requests to open directories.
          Unfortunately, it was possible for these to be forgotten without
          being freed up leading to resource loss at the server end.  Eventually,
          the server gives up servicing you and reports errors.  This will only
          occur once a significant number of accesses have been performed (the
          number depends entirely on server configuration).  This leak is now
          fixed.
      Admin:
        Tested against Cerium - debug reports that no handles are being leaked.
      
      Version 2.07. Tagged as 'LanManFS-2_07'
      6ce2ce71
  8. 19 Apr, 1999 1 commit
    • Stewart Brodie's avatar
      Socket leak fixed. · 2aa6c255
      Stewart Brodie authored
        Name mapping table modified to prefer mapping hard space to space.
      Detail:
        Fixes hard space->space mismapping.
        Doesn't leak sockets during startup if driver isn't ready.
      Admin:
        Check-in of previously uncommitted bug fixes to get final version number
      
      
      Version 2.06. Tagged as 'LanManFS-2_06'
      2aa6c255
  9. 16 Mar, 1999 1 commit
    • Stewart Brodie's avatar
      No longer assumes that it should attach itself to eh0 if it cannot find a driver. · 698e4170
      Stewart Brodie authored
      Detail:
        The module used to have specific knowledge of the driver to which it
          was supposed to bind if it was unable to find any active drivers at
          the time that LanManFS was initialised.  This meant that if the
          LanManFS module was placed in ROM (eg. in STB3) and the drivers
          hadn't initialised by the time that LanManFS was initialised, it
          would sit and wait for EtherH to arrive - which doesn't happen
          for ATM solutions, and doesn't happen for Ethernet in STB3 because
          we no longer use EtherH!
      Admin:
        Tested in STB22 expansion cards, and in STB3 ROM builds for both
          Ethernet and ATM solutions.
      
      Version 2.05. Tagged as 'LanManFS-2_05'
      698e4170
  10. 09 Mar, 1999 1 commit
    • Stewart Brodie's avatar
      Changed idle-out strategy. · feb9328e
      Stewart Brodie authored
        Introduced new error message for re-entrancy prevention trap to use.
      Detail:
        When 'pinging' an SMB server, LanManFS does not wait for any response
          but the response reading routine knows to just throw away any old
          SMBchkpth responses that it gets and try reading again.
        Re-entrancy trap now has its own error "LanManFS in use" &1663E, which
          means you no longer see "!Armboot files nested too deeply" which is
          confusing.  The only way you can provoke this message is if you use
          Alt-Break whilst the NetBIOS/IP code is executing.  The error plays
          the same part as "FileCore in use" does for FileCore.
      Admin:
        Verified module still works and the anti idle-out features still work.
      
      Version 2.04. Tagged as 'LanManFS-2_04'
      feb9328e
  11. 01 Mar, 1999 1 commit
    • Stewart Brodie's avatar
      New *LMLS command. · 9ec1ae87
      Stewart Brodie authored
        Fix for ./.. files in short filename shares.
        Long multiply now provided in assembler.
      Detail:
        *LMLS is a new filesystem-specific command which performs the same
          task as "smbclient -L" does under UNIX - ie. listing all the shares
          available on the specified host.
        When enumerating the shares on a remote server, LanManFS now remembers
          all the printers, IPC, device and disc shares (for *LMLS to output).
        The 32x32->64 multiply routine is now provided in assembler instead of
          the previous huge amount of obscure C taken from NSPRLib.  This is
          more understandable (and almost certainly far smaller and quicker
          and doesn't need a hack to stop the compiler mis-optimising it!)
        Old short filename shares still had problems with the . and .. file
          filtering.  Programmer fault there - should've let the compiler do
          the optimisations :-)
        Server info string fixed to byte-reverse the port numbers when printing
          the string into the info buffer.  Now claims to be talking to port 139
          as it should.
      Admin:
        Tested in general desktop use for several days, plus experimental versions
          tested in other boot ROMs.
      
      Version 2.03. Tagged as 'LanManFS-2_03'
      9ec1ae87
  12. 18 Feb, 1999 2 commits
    • Stewart Brodie's avatar
      Protocol negotiated features need to be per-server, not per-share. · 91cb8981
      Stewart Brodie authored
      Detail:
        Long filename flag tarnsferred to be a server property rather than
          a share property, otherwise subsequent shares to the same server
          do not get long filenames (because the subsequent shares don't
          have to go through the connection negotiation phase)
      Admin:
        Tested on by mounting lots of drives through desktop Omni frontend.
      
      Version 2.02. Tagged as 'LanManFS-2_02'
      91cb8981
    • Stewart Brodie's avatar
      Bad check for . and .. fixed. · ea06b765
      Stewart Brodie authored
      Detail:
        Any filename starting with . was being hidden.
      Admin:
        Tested.  Confirmed . and .. are not there but files such as .rhosts
          are visible.
      
      Version 2.01. Tagged as 'LanManFS-2_01'
      ea06b765
  13. 16 Feb, 1999 1 commit
    • Stewart Brodie's avatar
      Support for long filename. · d49e6981
      Stewart Brodie authored
        Support for spaces in machine names.
        Merge of sbrodie_LanManFS_dev branch to trunk.
      Detail:
        LanManFS 2.00 supports the "NT LM 0.12" protocol, enabling it to
          use long filenames on mounted shares.
      Admin:
        Supporting documentation:
          1215,256/FS: LanManFS Software Functional Specification.
        Same as LanManFS-1_87_1_1_1_1_2_13.
      
      Version 2.00. Tagged as 'LanManFS-2_00'
      d49e6981
  14. 03 Dec, 1998 1 commit